7 files changed, 14 insertions, 22 deletions
diff --git a/board/Marvell/common/serial.c b/board/Marvell/common/serial.c
index 9d0d213..6a1d4d7 100644
--- a/board/Marvell/common/serial.c
+++ b/board/Marvell/common/serial.c
@@ -45,13 +45,13 @@
 
 #include "ns16550.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_MPSC
 
 
 int serial_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 #if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2)
 	int clock_divisor = 230400 / gd->baudrate;
 #endif
@@ -88,8 +88,6 @@ int serial_tstc (void)
 
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate);
 }
 
@@ -97,8 +95,6 @@ void serial_setbrg (void)
 
 int serial_init (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int clock_divisor = 230400 / gd->baudrate;
 
 #ifdef CFG_INIT_CHAN1
@@ -130,8 +126,6 @@ int serial_tstc (void)
 
 void serial_setbrg (void)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	int clock_divisor = 230400 / gd->baudrate;
 
 #ifdef CFG_INIT_CHAN1
diff --git a/board/Marvell/db64360/mpsc.c b/board/Marvell/db64360/mpsc.c
index ccb3adc..d8acd31 100644
--- a/board/Marvell/db64360/mpsc.c
+++ b/board/Marvell/db64360/mpsc.c
@@ -42,6 +42,8 @@
 
 #include "../include/memory.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* Define this if you wish to use the MPSC as a register based UART.
  * This will force the serial port to not use the SDMA engine at all.
  */
@@ -114,9 +116,7 @@ static void mpsc_debug_init (void)
 
 	/* Clear the CFR  (CHR4) */
 	/* Write random 'Z' bit (bit 29) of CHR4 to enable debug uart *UNDOCUMENTED FEATURE* */
-	temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_indent: Standard input:229: Warning:old style assignment ambiguity in "=&".  Assuming "= &"
-
-REG_GAP));
+	temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP));
 	temp &= 0xffffff00;
 	temp |= BIT29;
 	GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP),
@@ -158,7 +158,6 @@ char mpsc_getchar_debug (void)
  * global variables [josh] */
 int mpsc_putchar_early (char ch)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int mpsc = CHANNEL;
 	int temp =
 		GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
@@ -511,7 +510,6 @@ void mpsc_init2 (void)
 
 int galbrg_set_baudrate (int channel, int rate)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int clock;
 
 	galbrg_disable (channel);	/*ok */
diff --git a/board/Marvell/db64360/mv_eth.c b/board/Marvell/db64360/mv_eth.c
index 3c5dee7..e5a87ad 100644
--- a/board/Marvell/db64360/mv_eth.c
+++ b/board/Marvell/db64360/mv_eth.c
@@ -732,6 +732,7 @@ int mv64360_eth_xmit (struct eth_device *dev, volatile void *dataPtr,
 	pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC;	/* DMA owned, first last */
 	pkt_info.byte_cnt = dataSize;
 	pkt_info.buf_ptr = (unsigned int) dataPtr;
+	pkt_info.return_info = 0;
 
 	status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info);
 	if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) {
diff --git a/board/Marvell/db64360/sdram_init.c b/board/Marvell/db64360/sdram_init.c
index d2635f8..f04aaf9 100644
--- a/board/Marvell/db64360/sdram_init.c
+++ b/board/Marvell/db64360/sdram_init.c
@@ -42,6 +42,8 @@
 #include "64360.h"
 #include "mv_regs.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #undef	DEBUG
 #define MAP_PCI
 
@@ -246,8 +248,6 @@ static inline unsigned short NSto10PS (unsigned char spd_byte)
 /* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */
 static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned long spd_checksum;
 
 #ifdef ZUMA_NTL
diff --git a/board/Marvell/db64460/mpsc.c b/board/Marvell/db64460/mpsc.c
index 33fbc49..b783aff 100644
--- a/board/Marvell/db64460/mpsc.c
+++ b/board/Marvell/db64460/mpsc.c
@@ -42,6 +42,8 @@
 
 #include "../include/memory.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 /* Define this if you wish to use the MPSC as a register based UART.
  * This will force the serial port to not use the SDMA engine at all.
  */
@@ -114,9 +116,7 @@ static void mpsc_debug_init (void)
 
 	/* Clear the CFR  (CHR4) */
 	/* Write random 'Z' bit (bit 29) of CHR4 to enable debug uart *UNDOCUMENTED FEATURE* */
-	temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_indent: Standard input:229: Warning:old style assignment ambiguity in "=&".  Assuming "= &"
-
-REG_GAP));
+	temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP));
 	temp &= 0xffffff00;
 	temp |= BIT29;
 	GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP),
@@ -158,7 +158,6 @@ char mpsc_getchar_debug (void)
  * global variables [josh] */
 int mpsc_putchar_early (char ch)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int mpsc = CHANNEL;
 	int temp =
 		GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
@@ -511,7 +510,6 @@ void mpsc_init2 (void)
 
 int galbrg_set_baudrate (int channel, int rate)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	int clock;
 
 	galbrg_disable (channel);	/*ok */
diff --git a/board/Marvell/db64460/mv_eth.c b/board/Marvell/db64460/mv_eth.c
index ec5d581..b2c7835 100644
--- a/board/Marvell/db64460/mv_eth.c
+++ b/board/Marvell/db64460/mv_eth.c
@@ -731,6 +731,7 @@ int mv64460_eth_xmit (struct eth_device *dev, volatile void *dataPtr,
 	pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC;	/* DMA owned, first last */
 	pkt_info.byte_cnt = dataSize;
 	pkt_info.buf_ptr = (unsigned int) dataPtr;
+	pkt_info.return_info = 0;
 
 	status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info);
 	if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) {
diff --git a/board/Marvell/db64460/sdram_init.c b/board/Marvell/db64460/sdram_init.c
index 8cfe84c..1762202 100644
--- a/board/Marvell/db64460/sdram_init.c
+++ b/board/Marvell/db64460/sdram_init.c
@@ -42,6 +42,8 @@
 #include "64460.h"
 #include "mv_regs.h"
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #undef	DEBUG
 #define	MAP_PCI
 
@@ -246,8 +248,6 @@ static inline unsigned short NSto10PS (unsigned char spd_byte)
 /* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */
 static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
 {
-	DECLARE_GLOBAL_DATA_PTR;
-
 	unsigned long spd_checksum;
 
 #ifdef ZUMA_NTL