1 files changed, 2 insertions, 103 deletions

diff --git a/board/ads5121/ads5121.c b/board/ads5121/ads5121.c
index 6c40e94..405432c 100644
--- a/board/ads5121/ads5121.c
+++ b/board/ads5121/ads5121.c
@@ -216,7 +216,7 @@ long int fixed_sdram (void)
 int misc_init_r(void)
 {
 	u8 tmp_val;
-	extern int ads5121_diu_init(void);
+	extern int mpc5121_diu_init(void);
 
 	/* Using this for DIU init before the driver in linux takes over
 	 *  Enable the TFP410 Encoder (I2C address 0x38)
@@ -239,7 +239,7 @@ int misc_init_r(void)
 
 #ifdef CONFIG_FSL_DIU_FB
 #if	!(defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE))
-	ads5121_diu_init();
+	mpc5121_diu_init();
 #endif
 #endif
 
@@ -329,104 +329,3 @@ void ft_board_setup(void *blob, bd_t *bd)
 	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 }
 #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
-
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
-
-void init_ide_reset (void)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	debug ("init_ide_reset\n");
-
-	/*
-	 * Clear the reset bit to reset the interface
-	 * cf. RefMan MPC5121EE: 28.4.1 Resetting the ATA Bus
-	 */
-	immr->pata.pata_ata_control = 0;
-	udelay(100);
-	/* Assert the reset bit to enable the interface */
-	immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B;
-	udelay(100);
-
-}
-
-void ide_set_reset (int idereset)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	debug ("ide_set_reset(%d)\n", idereset);
-
-	if (idereset) {
-		immr->pata.pata_ata_control = 0;
-		udelay(100);
-	} else {
-		immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B;
-		udelay(100);
-	}
-}
-
-#define CALC_TIMING(t) (t + period - 1) / period
-
-int ide_preinit (void)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	long t;
-	const struct {
-		short t0;
-		short t1;
-		short t2_8;
-		short t2_16;
-		short t2i;
-		short t4;
-		short t9;
-		short tA;
-	} pio_specs = {
-		.t0    = 600,
-		.t1    =  70,
-		.t2_8  = 290,
-		.t2_16 = 165,
-		.t2i   =   0,
-		.t4    =  30,
-		.t9    =  20,
-		.tA    =  50,
-	};
-	union {
-		u32 config;
-		struct {
-			u8 field1;
-			u8 field2;
-			u8 field3;
-			u8 field4;
-		}bytes;
-	}cfg;
-
-	debug ("IDE preinit using PATA peripheral at IMMR-ADDR %08x\n",
-		(u32)&immr->pata);
-
-	/* Set the reset bit to 1 to enable the interface */
-	immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B;
-
-	/* Init timings : we use PIO mode 0 timings */
-	t = 1000000000 / gd->ips_clk;	/* period in ns */
-	cfg.bytes.field1 = 3;
-	cfg.bytes.field2 = 3;
-	cfg.bytes.field3 = (pio_specs.t1 + t) / t;
-	cfg.bytes.field4 = (pio_specs.t2_8 + t) / t;
-
-	immr->pata.pata_time1 = cfg.config;
-
-	cfg.bytes.field1 = (pio_specs.t2_8 + t) / t;
-	cfg.bytes.field2 = (pio_specs.tA + t) / t + 2;
-	cfg.bytes.field3 = 1;
-	cfg.bytes.field4 = (pio_specs.t4 + t) / t;
-
-	immr->pata.pata_time2 = cfg.config;
-
-	cfg.config = immr->pata.pata_time3;
-	cfg.bytes.field1 = (pio_specs.t9 + t) / t;
-
-	immr->pata.pata_time3 = cfg.config;
-	debug ("PATA preinit complete.\n");
-
-	return 0;
-}
-
-#endif /* defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET) */