summaryrefslogtreecommitdiff
path: root/board/atmel
diff options
context:
space:
mode:
Diffstat (limited to 'board/atmel')
-rw-r--r--board/atmel/at91cap9adk/at91cap9adk.c50
-rw-r--r--board/atmel/at91cap9adk/nand.c2
-rw-r--r--board/atmel/at91cap9adk/partition.c6
-rw-r--r--board/atmel/at91rm9200dk/at91rm9200dk.c2
-rw-r--r--board/atmel/at91rm9200dk/flash.c30
-rw-r--r--board/atmel/at91rm9200dk/partition.c8
-rw-r--r--board/atmel/at91rm9200dk/u-boot.lds2
-rw-r--r--board/atmel/at91sam9260ek/at91sam9260ek.c21
-rw-r--r--board/atmel/at91sam9260ek/nand.c2
-rw-r--r--board/atmel/at91sam9260ek/partition.c8
-rw-r--r--board/atmel/at91sam9261ek/at91sam9261ek.c39
-rw-r--r--board/atmel/at91sam9261ek/nand.c2
-rw-r--r--board/atmel/at91sam9261ek/partition.c8
-rw-r--r--board/atmel/at91sam9263ek/at91sam9263ek.c50
-rw-r--r--board/atmel/at91sam9263ek/nand.c2
-rw-r--r--board/atmel/at91sam9263ek/partition.c6
-rw-r--r--board/atmel/at91sam9rlek/at91sam9rlek.c39
-rw-r--r--board/atmel/at91sam9rlek/nand.c2
-rw-r--r--board/atmel/at91sam9rlek/partition.c6
-rw-r--r--board/atmel/atngw100/atngw100.c3
-rw-r--r--board/atmel/atstk1000/atstk1000.c3
-rw-r--r--board/atmel/atstk1000/flash.c6
22 files changed, 222 insertions, 75 deletions
diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c
index c5082a0..f7d68b7 100644
--- a/board/atmel/at91cap9adk/at91cap9adk.c
+++ b/board/atmel/at91cap9adk/at91cap9adk.c
@@ -30,11 +30,13 @@
#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
#include <lcd.h>
#include <atmel_lcdc.h>
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
#include <net.h>
#endif
+#include <netdev.h>
#define MP_BLOCK_3_BASE 0xFDF00000
@@ -50,19 +52,19 @@ static void at91cap9_serial_hw_init(void)
#ifdef CONFIG_USART0
at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US0);
#endif
#ifdef CONFIG_USART1
at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US1);
#endif
#ifdef CONFIG_USART2
at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US2);
#endif
#ifdef CONFIG_USART3 /* DBGU */
@@ -145,9 +147,9 @@ static void at91cap9_nand_hw_init(void)
at91_sys_write(AT91_SMC_MODE(3),
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
AT91_SMC_DBW_16 |
-#else /* CFG_NAND_DBW_8 */
+#else /* CONFIG_SYS_NAND_DBW_8 */
AT91_SMC_DBW_8 |
#endif
AT91_SMC_TDF_(1));
@@ -324,6 +326,35 @@ static void at91cap9_lcd_hw_init(void)
gd->fb_base = 0;
}
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+ ulong dram_size, nand_size;
+ int i;
+ char temp[32];
+
+ lcd_printf ("%s\n", U_BOOT_VERSION);
+ lcd_printf ("(C) 2008 ATMEL Corp\n");
+ lcd_printf ("at91support@atmel.com\n");
+ lcd_printf ("%s CPU at %s MHz\n",
+ AT91_CPU_NAME,
+ strmhz(temp, AT91_CPU_CLOCK));
+
+ dram_size = 0;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+ dram_size += gd->bd->bi_dram[i].size;
+ nand_size = 0;
+ for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+ nand_size += nand_info[i].size;
+ lcd_printf (" %ld MB SDRAM, %ld MB NAND\n",
+ dram_size >> 20,
+ nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
#endif
int board_init(void)
@@ -376,3 +407,12 @@ void reset_phy(void)
#endif
}
#endif
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_MACB
+ rc = macb_eth_initialize(0, (void *)AT91CAP9_BASE_EMAC, 0x00);
+#endif
+ return rc;
+}
diff --git a/board/atmel/at91cap9adk/nand.c b/board/atmel/at91cap9adk/nand.c
index 1dec558..cc2263b 100644
--- a/board/atmel/at91cap9adk/nand.c
+++ b/board/atmel/at91cap9adk/nand.c
@@ -62,7 +62,7 @@ static void at91cap9adk_nand_hwcontrol(struct mtd_info *mtd,
int board_nand_init(struct nand_chip *nand)
{
nand->ecc.mode = NAND_ECC_SOFT;
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
nand->options = NAND_BUSWIDTH_16;
#endif
nand->cmd_ctrl = at91cap9adk_nand_hwcontrol;
diff --git a/board/atmel/at91cap9adk/partition.c b/board/atmel/at91cap9adk/partition.c
index eb1a724..7e1d46f 100644
--- a/board/atmel/at91cap9adk/partition.c
+++ b/board/atmel/at91cap9adk/partition.c
@@ -23,10 +23,10 @@
#include <asm/hardware.h>
#include <dataflash.h>
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
- {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
};
/*define the area offsets*/
diff --git a/board/atmel/at91rm9200dk/at91rm9200dk.c b/board/atmel/at91rm9200dk/at91rm9200dk.c
index c564f73..b89a3fd 100644
--- a/board/atmel/at91rm9200dk/at91rm9200dk.c
+++ b/board/atmel/at91rm9200dk/at91rm9200dk.c
@@ -47,7 +47,7 @@ int board_init (void)
/* so we do _nothing_ here */
/* arch number of AT91RM9200DK-Board */
- gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200;
+ gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200DK;
/* adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
diff --git a/board/atmel/at91rm9200dk/flash.c b/board/atmel/at91rm9200dk/flash.c
index 0513d61..902c3c4 100644
--- a/board/atmel/at91rm9200dk/flash.c
+++ b/board/atmel/at91rm9200dk/flash.c
@@ -59,7 +59,7 @@ OrgDef OrgAT49BV6416[] =
{ 127, 64*1024 }, /* 127 * 64 kBytes sectors */
};
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
/* AT49BV1614A Codes */
#define FLASH_CODE1 0xAA
@@ -77,8 +77,8 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
#define CMD_UNLOCK_BYPASS 0x0020
#define CMD_SECTOR_UNLOCK 0x0070
-#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00005555<<1)))
-#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00002AAA<<1)))
+#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00005555<<1)))
+#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00002AAA<<1)))
#define BIT_ERASE_DONE 0x0080
#define BIT_RDY_MASK 0x0080
@@ -99,9 +99,9 @@ void flash_identification (flash_info_t * info)
MEM_FLASH_ADDR2 = FLASH_CODE2;
MEM_FLASH_ADDR1 = ID_IN_CODE;
- manuf_code = *(volatile u16 *) CFG_FLASH_BASE;
- device_code = *(volatile u16 *) (CFG_FLASH_BASE + 2);
- add_device_code = *(volatile u16 *) (CFG_FLASH_BASE + (3 << 1));
+ manuf_code = *(volatile u16 *) CONFIG_SYS_FLASH_BASE;
+ device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + 2);
+ add_device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + (3 << 1));
MEM_FLASH_ADDR1 = FLASH_CODE1;
MEM_FLASH_ADDR2 = FLASH_CODE2;
@@ -157,7 +157,7 @@ ulong flash_init (void)
ulong size = 0;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
ulong flashbase = 0;
flash_identification (&flash_info[i]);
@@ -216,18 +216,18 @@ ulong flash_init (void)
/* Protect binary boot image */
flash_protect (FLAG_PROTECT_SET,
- CFG_FLASH_BASE,
- CFG_FLASH_BASE + CFG_BOOT_SIZE - 1, &flash_info[0]);
+ CONFIG_SYS_FLASH_BASE,
+ CONFIG_SYS_FLASH_BASE + CONFIG_SYS_BOOT_SIZE - 1, &flash_info[0]);
/* Protect environment variables */
flash_protect (FLAG_PROTECT_SET,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+ CONFIG_ENV_ADDR,
+ CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
/* Protect U-Boot gzipped image */
flash_protect (FLAG_PROTECT_SET,
- CFG_U_BOOT_BASE,
- CFG_U_BOOT_BASE + CFG_U_BOOT_SIZE - 1, &flash_info[0]);
+ CONFIG_SYS_U_BOOT_BASE,
+ CONFIG_SYS_U_BOOT_BASE + CONFIG_SYS_U_BOOT_SIZE - 1, &flash_info[0]);
return size;
}
@@ -345,7 +345,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
result = *addr;
/* check timeout */
- if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
chip1 = TMO;
break;
@@ -433,7 +433,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
result = *addr;
/* check timeout */
- if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
chip1 = ERR | TMO;
break;
}
diff --git a/board/atmel/at91rm9200dk/partition.c b/board/atmel/at91rm9200dk/partition.c
index 975be17..c739b11 100644
--- a/board/atmel/at91rm9200dk/partition.c
+++ b/board/atmel/at91rm9200dk/partition.c
@@ -23,11 +23,11 @@
#include <asm/hardware.h>
#include <dataflash.h>
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
- {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
- {CFG_DATAFLASH_LOGIC_ADDR_CS3, 3}
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3, 3}
};
/*define the area offsets*/
diff --git a/board/atmel/at91rm9200dk/u-boot.lds b/board/atmel/at91rm9200dk/u-boot.lds
index 14cd228..987b07d 100644
--- a/board/atmel/at91rm9200dk/u-boot.lds
+++ b/board/atmel/at91rm9200dk/u-boot.lds
@@ -52,6 +52,6 @@ SECTIONS
. = ALIGN(4);
__bss_start = .;
- .bss (NOLOAD) : { *(.bss) }
+ .bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
_end = .;
}
diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c
index 06d8512..ef99b8b 100644
--- a/board/atmel/at91sam9260ek/at91sam9260ek.c
+++ b/board/atmel/at91sam9260ek/at91sam9260ek.c
@@ -30,9 +30,11 @@
#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
#include <net.h>
#endif
+#include <netdev.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -46,19 +48,19 @@ static void at91sam9260ek_serial_hw_init(void)
#ifdef CONFIG_USART0
at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US0);
#endif
#ifdef CONFIG_USART1
at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US1);
#endif
#ifdef CONFIG_USART2
at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US2);
#endif
#ifdef CONFIG_USART3 /* DBGU */
@@ -90,9 +92,9 @@ static void at91sam9260ek_nand_hw_init(void)
at91_sys_write(AT91_SMC_MODE(3),
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
AT91_SMC_DBW_16 |
-#else /* CFG_NAND_DBW_8 */
+#else /* CONFIG_SYS_NAND_DBW_8 */
AT91_SMC_DBW_8 |
#endif
AT91_SMC_TDF_(2));
@@ -248,3 +250,12 @@ void reset_phy(void)
#endif
}
#endif
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_MACB
+ rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00);
+#endif
+ return rc;
+}
diff --git a/board/atmel/at91sam9260ek/nand.c b/board/atmel/at91sam9260ek/nand.c
index 665e35c..c5ac634 100644
--- a/board/atmel/at91sam9260ek/nand.c
+++ b/board/atmel/at91sam9260ek/nand.c
@@ -67,7 +67,7 @@ static int at91sam9260ek_nand_ready(struct mtd_info *mtd)
int board_nand_init(struct nand_chip *nand)
{
nand->ecc.mode = NAND_ECC_SOFT;
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
nand->options = NAND_BUSWIDTH_16;
#endif
nand->cmd_ctrl = at91sam9260ek_nand_hwcontrol;
diff --git a/board/atmel/at91sam9260ek/partition.c b/board/atmel/at91sam9260ek/partition.c
index 557d695..2629c67 100644
--- a/board/atmel/at91sam9260ek/partition.c
+++ b/board/atmel/at91sam9260ek/partition.c
@@ -23,11 +23,11 @@
#include <asm/hardware.h>
#include <dataflash.h>
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
- {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
- {CFG_DATAFLASH_LOGIC_ADDR_CS1, 1}
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1, 1}
};
/*define the area offsets*/
diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c
index 647aab5..14f236d 100644
--- a/board/atmel/at91sam9261ek/at91sam9261ek.c
+++ b/board/atmel/at91sam9261ek/at91sam9261ek.c
@@ -48,19 +48,19 @@ static void at91sam9261ek_serial_hw_init(void)
#ifdef CONFIG_USART0
at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US0);
#endif
#ifdef CONFIG_USART1
at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US1);
#endif
#ifdef CONFIG_USART2
at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US2);
#endif
#ifdef CONFIG_USART3 /* DBGU */
@@ -92,9 +92,9 @@ static void at91sam9261ek_nand_hw_init(void)
at91_sys_write(AT91_SMC_MODE(3),
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
AT91_SMC_DBW_16 |
-#else /* CFG_NAND_DBW_8 */
+#else /* CONFIG_SYS_NAND_DBW_8 */
AT91_SMC_DBW_8 |
#endif
AT91_SMC_TDF_(2));
@@ -209,6 +209,35 @@ static void at91sam9261ek_lcd_hw_init(void)
gd->fb_base = AT91SAM9261_SRAM_BASE;
}
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+ ulong dram_size, nand_size;
+ int i;
+ char temp[32];
+
+ lcd_printf ("%s\n", U_BOOT_VERSION);
+ lcd_printf ("(C) 2008 ATMEL Corp\n");
+ lcd_printf ("at91support@atmel.com\n");
+ lcd_printf ("%s CPU at %s MHz\n",
+ AT91_CPU_NAME,
+ strmhz(temp, AT91_CPU_CLOCK));
+
+ dram_size = 0;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+ dram_size += gd->bd->bi_dram[i].size;
+ nand_size = 0;
+ for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+ nand_size += nand_info[i].size;
+ lcd_printf (" %ld MB SDRAM, %ld MB NAND\n",
+ dram_size >> 20,
+ nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
#endif
int board_init(void)
diff --git a/board/atmel/at91sam9261ek/nand.c b/board/atmel/at91sam9261ek/nand.c
index fccb9d7..06395ee 100644
--- a/board/atmel/at91sam9261ek/nand.c
+++ b/board/atmel/at91sam9261ek/nand.c
@@ -67,7 +67,7 @@ static int at91sam9261ek_nand_ready(struct mtd_info *mtd)
int board_nand_init(struct nand_chip *nand)
{
nand->ecc.mode = NAND_ECC_SOFT;
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
nand->options = NAND_BUSWIDTH_16;
#endif
nand->cmd_ctrl = at91sam9261ek_nand_hwcontrol;
diff --git a/board/atmel/at91sam9261ek/partition.c b/board/atmel/at91sam9261ek/partition.c
index 975be17..c739b11 100644
--- a/board/atmel/at91sam9261ek/partition.c
+++ b/board/atmel/at91sam9261ek/partition.c
@@ -23,11 +23,11 @@
#include <asm/hardware.h>
#include <dataflash.h>
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
- {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
- {CFG_DATAFLASH_LOGIC_ADDR_CS3, 3}
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3, 3}
};
/*define the area offsets*/
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
index 927fc91..ebd4649 100644
--- a/board/atmel/at91sam9263ek/at91sam9263ek.c
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -31,11 +31,13 @@
#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
#include <lcd.h>
#include <atmel_lcdc.h>
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
#include <net.h>
#endif
+#include <netdev.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -49,19 +51,19 @@ static void at91sam9263ek_serial_hw_init(void)
#ifdef CONFIG_USART0
at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US0);
#endif
#ifdef CONFIG_USART1
at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US1);
#endif
#ifdef CONFIG_USART2
at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US2);
#endif
#ifdef CONFIG_USART3 /* DBGU */
@@ -93,9 +95,9 @@ static void at91sam9263ek_nand_hw_init(void)
at91_sys_write(AT91_SMC_MODE(3),
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
AT91_SMC_DBW_16 |
-#else /* CFG_NAND_DBW_8 */
+#else /* CONFIG_SYS_NAND_DBW_8 */
AT91_SMC_DBW_8 |
#endif
AT91_SMC_TDF_(2));
@@ -258,6 +260,35 @@ static void at91sam9263ek_lcd_hw_init(void)
gd->fb_base = AT91SAM9263_SRAM0_BASE;
}
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+ ulong dram_size, nand_size;
+ int i;
+ char temp[32];
+
+ lcd_printf ("%s\n", U_BOOT_VERSION);
+ lcd_printf ("(C) 2008 ATMEL Corp\n");
+ lcd_printf ("at91support@atmel.com\n");
+ lcd_printf ("%s CPU at %s MHz\n",
+ AT91_CPU_NAME,
+ strmhz(temp, AT91_CPU_CLOCK));
+
+ dram_size = 0;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+ dram_size += gd->bd->bi_dram[i].size;
+ nand_size = 0;
+ for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+ nand_size += nand_info[i].size;
+ lcd_printf (" %ld MB SDRAM, %ld MB NAND\n",
+ dram_size >> 20,
+ nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
#endif
int board_init(void)
@@ -308,3 +339,12 @@ void reset_phy(void)
#endif
}
#endif
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_MACB
+ rc = macb_eth_initialize(0, (void *)AT91SAM9263_BASE_EMAC, 0x00);
+#endif
+ return rc;
+}
diff --git a/board/atmel/at91sam9263ek/nand.c b/board/atmel/at91sam9263ek/nand.c
index 250ec7f..3c247f6 100644
--- a/board/atmel/at91sam9263ek/nand.c
+++ b/board/atmel/at91sam9263ek/nand.c
@@ -67,7 +67,7 @@ static int at91sam9263ek_nand_ready(struct mtd_info *mtd)
int board_nand_init(struct nand_chip *nand)
{
nand->ecc.mode = NAND_ECC_SOFT;
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
nand->options = NAND_BUSWIDTH_16;
#endif
nand->cmd_ctrl = at91sam9263ek_nand_hwcontrol;
diff --git a/board/atmel/at91sam9263ek/partition.c b/board/atmel/at91sam9263ek/partition.c
index eb1a724..7e1d46f 100644
--- a/board/atmel/at91sam9263ek/partition.c
+++ b/board/atmel/at91sam9263ek/partition.c
@@ -23,10 +23,10 @@
#include <asm/hardware.h>
#include <dataflash.h>
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
- {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
};
/*define the area offsets*/
diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c
index 509e7c3..b6fef9d 100644
--- a/board/atmel/at91sam9rlek/at91sam9rlek.c
+++ b/board/atmel/at91sam9rlek/at91sam9rlek.c
@@ -48,19 +48,19 @@ static void at91sam9rlek_serial_hw_init(void)
#ifdef CONFIG_USART0
at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US0);
#endif
#ifdef CONFIG_USART1
at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US1);
#endif
#ifdef CONFIG_USART2
at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US2);
#endif
#ifdef CONFIG_USART3 /* DBGU */
@@ -92,9 +92,9 @@ static void at91sam9rlek_nand_hw_init(void)
at91_sys_write(AT91_SMC_MODE(3),
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
AT91_SMC_DBW_16 |
-#else /* CFG_NAND_DBW_8 */
+#else /* CONFIG_SYS_NAND_DBW_8 */
AT91_SMC_DBW_8 |
#endif
AT91_SMC_TDF_(2));
@@ -181,6 +181,35 @@ static void at91sam9rlek_lcd_hw_init(void)
gd->fb_base = 0;
}
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+ ulong dram_size, nand_size;
+ int i;
+ char temp[32];
+
+ lcd_printf ("%s\n", U_BOOT_VERSION);
+ lcd_printf ("(C) 2008 ATMEL Corp\n");
+ lcd_printf ("at91support@atmel.com\n");
+ lcd_printf ("%s CPU at %s MHz\n",
+ AT91_CPU_NAME,
+ strmhz(temp, AT91_CPU_CLOCK));
+
+ dram_size = 0;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+ dram_size += gd->bd->bi_dram[i].size;
+ nand_size = 0;
+ for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+ nand_size += nand_info[i].size;
+ lcd_printf (" %ld MB SDRAM, %ld MB NAND\n",
+ dram_size >> 20,
+ nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
#endif
diff --git a/board/atmel/at91sam9rlek/nand.c b/board/atmel/at91sam9rlek/nand.c
index eb342b8..625f6ec 100644
--- a/board/atmel/at91sam9rlek/nand.c
+++ b/board/atmel/at91sam9rlek/nand.c
@@ -67,7 +67,7 @@ static int at91sam9rlek_nand_ready(struct mtd_info *mtd)
int board_nand_init(struct nand_chip *nand)
{
nand->ecc.mode = NAND_ECC_SOFT;
-#ifdef CFG_NAND_DBW_16
+#ifdef CONFIG_SYS_NAND_DBW_16
nand->options = NAND_BUSWIDTH_16;
#endif
nand->cmd_ctrl = at91sam9rlek_nand_hwcontrol;
diff --git a/board/atmel/at91sam9rlek/partition.c b/board/atmel/at91sam9rlek/partition.c
index eb1a724..7e1d46f 100644
--- a/board/atmel/at91sam9rlek/partition.c
+++ b/board/atmel/at91sam9rlek/partition.c
@@ -23,10 +23,10 @@
#include <asm/hardware.h>
#include <dataflash.h>
-AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
- {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
};
/*define the area offsets*/
diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c
index 480d525..004d8da 100644
--- a/board/atmel/atngw100/atngw100.c
+++ b/board/atmel/atngw100/atngw100.c
@@ -27,6 +27,7 @@
#include <asm/arch/gpio.h>
#include <asm/arch/hmatrix.h>
#include <asm/arch/portmux.h>
+#include <netdev.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -95,8 +96,6 @@ int board_early_init_r(void)
return 0;
}
-extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
-
#ifdef CONFIG_CMD_NET
int board_eth_init(bd_t *bi)
{
diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c
index 7be3993..c36cb57 100644
--- a/board/atmel/atstk1000/atstk1000.c
+++ b/board/atmel/atstk1000/atstk1000.c
@@ -26,6 +26,7 @@
#include <asm/arch/clk.h>
#include <asm/arch/hmatrix.h>
#include <asm/arch/portmux.h>
+#include <netdev.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -117,8 +118,6 @@ int board_early_init_r(void)
return 0;
}
-extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
-
#ifdef CONFIG_CMD_NET
int board_eth_init(bd_t *bi)
{
diff --git a/board/atmel/atstk1000/flash.c b/board/atmel/atstk1000/flash.c
index e2bfd4a..4d380f3 100644
--- a/board/atmel/atstk1000/flash.c
+++ b/board/atmel/atstk1000/flash.c
@@ -55,17 +55,17 @@ unsigned long flash_init(void)
unsigned long addr;
unsigned int i;
- flash_info[0].size = CFG_FLASH_SIZE;
+ flash_info[0].size = CONFIG_SYS_FLASH_SIZE;
flash_info[0].sector_count = 135;
- flash_identify(uncached((void *)CFG_FLASH_BASE), &flash_info[0]);
+ flash_identify(uncached((void *)CONFIG_SYS_FLASH_BASE), &flash_info[0]);
for (i = 0, addr = 0; i < 8; i++, addr += 0x2000)
flash_info[0].start[i] = addr;
for (; i < flash_info[0].sector_count; i++, addr += 0x10000)
flash_info[0].start[i] = addr;
- return CFG_FLASH_SIZE;
+ return CONFIG_SYS_FLASH_SIZE;
}
void flash_print_info(flash_info_t *info)