summaryrefslogtreecommitdiff
path: root/board/compulab
diff options
context:
space:
mode:
Diffstat (limited to 'board/compulab')
-rw-r--r--board/compulab/cm_t43/Makefile6
-rw-r--r--board/compulab/cm_t43/cm_t43.c144
-rw-r--r--board/compulab/cm_t43/spl.c (renamed from board/compulab/cm_t43/board.c)140
3 files changed, 150 insertions, 140 deletions
diff --git a/board/compulab/cm_t43/Makefile b/board/compulab/cm_t43/Makefile
index 3993689..c749659 100644
--- a/board/compulab/cm_t43/Makefile
+++ b/board/compulab/cm_t43/Makefile
@@ -6,4 +6,8 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y += board.o mux.o
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o mux.o
+else
+obj-y += cm_t43.o mux.o
+endif
diff --git a/board/compulab/cm_t43/cm_t43.c b/board/compulab/cm_t43/cm_t43.c
new file mode 100644
index 0000000..445b609
--- /dev/null
+++ b/board/compulab/cm_t43/cm_t43.c
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2015 Compulab, Ltd.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <cpsw.h>
+#include <asm/gpio.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/emif.h>
+#include <power/pmic.h>
+#include <power/tps65218.h>
+#include "board.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+/* setup board specific PMIC */
+int power_init_board(void)
+{
+ struct pmic *p;
+
+ power_tps65218_init(I2C_PMIC);
+ p = pmic_get("TPS65218_PMIC");
+ if (p && !pmic_probe(p))
+ puts("PMIC: TPS65218\n");
+
+ return 0;
+}
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+ gpmc_init();
+ set_i2c_pin_mux();
+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
+ i2c_probe(TPS65218_CHIP_PM);
+
+ return 0;
+}
+
+#ifdef CONFIG_DRIVER_TI_CPSW
+
+static void cpsw_control(int enabled)
+{
+ return;
+}
+
+static struct cpsw_slave_data cpsw_slaves[] = {
+ {
+ .slave_reg_ofs = 0x208,
+ .sliver_reg_ofs = 0xd80,
+ .phy_addr = 0,
+ .phy_if = PHY_INTERFACE_MODE_RGMII,
+ },
+ {
+ .slave_reg_ofs = 0x308,
+ .sliver_reg_ofs = 0xdc0,
+ .phy_addr = 1,
+ .phy_if = PHY_INTERFACE_MODE_RGMII,
+ },
+};
+
+static struct cpsw_platform_data cpsw_data = {
+ .mdio_base = CPSW_MDIO_BASE,
+ .cpsw_base = CPSW_BASE,
+ .mdio_div = 0xff,
+ .channels = 8,
+ .cpdma_reg_ofs = 0x800,
+ .slaves = 2,
+ .slave_data = cpsw_slaves,
+ .ale_reg_ofs = 0xd00,
+ .ale_entries = 1024,
+ .host_port_reg_ofs = 0x108,
+ .hw_stats_reg_ofs = 0x900,
+ .bd_ram_ofs = 0x2000,
+ .mac_control = (1 << 5),
+ .control = cpsw_control,
+ .host_port_num = 0,
+ .version = CPSW_CTRL_VERSION_2,
+};
+
+#define GPIO_PHY1_RST 170
+#define GPIO_PHY2_RST 168
+
+int board_phy_config(struct phy_device *phydev)
+{
+ unsigned short val;
+
+ /* introduce tx clock delay */
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
+ val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
+ val |= 0x0100;
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
+
+ if (phydev->drv->config)
+ return phydev->drv->config(phydev);
+
+ return 0;
+}
+
+static void board_phy_init(void)
+{
+ set_mdio_pin_mux();
+ writel(0x40003, 0x44e10a74); /* Mux pin as clkout2 */
+ writel(0x10006, 0x44df4108); /* Select EXTDEV as clock source */
+ writel(0x4, 0x44df2e60); /* Set EXTDEV as MNbypass */
+
+ /* For revision A */
+ writel(0x2000009, 0x44df2e6c);
+ writel(0x38a, 0x44df2e70);
+
+ mdelay(10);
+
+ gpio_request(GPIO_PHY1_RST, "phy1_rst");
+ gpio_request(GPIO_PHY2_RST, "phy2_rst");
+ gpio_direction_output(GPIO_PHY1_RST, 0);
+ gpio_direction_output(GPIO_PHY2_RST, 0);
+ mdelay(2);
+
+ gpio_set_value(GPIO_PHY1_RST, 1);
+ gpio_set_value(GPIO_PHY2_RST, 1);
+ mdelay(2);
+}
+
+int board_eth_init(bd_t *bis)
+{
+ int rv;
+
+ set_rgmii_pin_mux();
+ writel(RGMII_MODE_ENABLE | RGMII_INT_DELAY, &cdev->miisel);
+ board_phy_init();
+
+ rv = cpsw_register(&cpsw_data);
+ if (rv < 0)
+ printf("Error %d registering CPSW switch\n", rv);
+
+ return rv;
+}
+#endif
diff --git a/board/compulab/cm_t43/board.c b/board/compulab/cm_t43/spl.c
index 4272c45..03ecf8a 100644
--- a/board/compulab/cm_t43/board.c
+++ b/board/compulab/cm_t43/spl.c
@@ -1,31 +1,17 @@
/*
- * Copyright (C) 2015 Compulab, Ltd.
+ * Copyright (C) 2016 Compulab, Ltd.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
-#include <i2c.h>
-#include <miiphy.h>
-#include <cpsw.h>
#include <spl.h>
#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/mux.h>
#include <asm/arch/ddr_defs.h>
-#include <asm/errno.h>
#include <asm/gpio.h>
-#include <asm/emif.h>
-#include <power/pmic.h>
-#include <power/tps65218.h>
-#include "board.h"
DECLARE_GLOBAL_DATA_PTR;
-static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-
const struct dpll_params dpll_mpu = { 800, 24, 1, -1, -1, -1, -1 };
const struct dpll_params dpll_core = { 1000, 24, -1, -1, 10, 8, 4 };
const struct dpll_params dpll_per = { 960, 24, 5, -1, -1, -1, -1 };
@@ -145,128 +131,4 @@ void sdram_init(void)
hang();
}
-#endif
-
-/* setup board specific PMIC */
-int power_init_board(void)
-{
- struct pmic *p;
-
- power_tps65218_init(I2C_PMIC);
- p = pmic_get("TPS65218_PMIC");
- if (p && !pmic_probe(p))
- puts("PMIC: TPS65218\n");
-
- return 0;
-}
-
-int board_init(void)
-{
- gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
- gpmc_init();
- set_i2c_pin_mux();
- i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
- i2c_probe(TPS65218_CHIP_PM);
-
- return 0;
-}
-
-#ifdef CONFIG_DRIVER_TI_CPSW
-
-static void cpsw_control(int enabled)
-{
- return;
-}
-
-static struct cpsw_slave_data cpsw_slaves[] = {
- {
- .slave_reg_ofs = 0x208,
- .sliver_reg_ofs = 0xd80,
- .phy_addr = 0,
- .phy_if = PHY_INTERFACE_MODE_RGMII,
- },
- {
- .slave_reg_ofs = 0x308,
- .sliver_reg_ofs = 0xdc0,
- .phy_addr = 1,
- .phy_if = PHY_INTERFACE_MODE_RGMII,
- },
-};
-
-static struct cpsw_platform_data cpsw_data = {
- .mdio_base = CPSW_MDIO_BASE,
- .cpsw_base = CPSW_BASE,
- .mdio_div = 0xff,
- .channels = 8,
- .cpdma_reg_ofs = 0x800,
- .slaves = 2,
- .slave_data = cpsw_slaves,
- .ale_reg_ofs = 0xd00,
- .ale_entries = 1024,
- .host_port_reg_ofs = 0x108,
- .hw_stats_reg_ofs = 0x900,
- .bd_ram_ofs = 0x2000,
- .mac_control = (1 << 5),
- .control = cpsw_control,
- .host_port_num = 0,
- .version = CPSW_CTRL_VERSION_2,
-};
-
-#define GPIO_PHY1_RST 170
-#define GPIO_PHY2_RST 168
-
-int board_phy_config(struct phy_device *phydev)
-{
- unsigned short val;
-
- /* introduce tx clock delay */
- phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
- val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
- val |= 0x0100;
- phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
-
- if (phydev->drv->config)
- return phydev->drv->config(phydev);
-
- return 0;
-}
-
-static void board_phy_init(void)
-{
- set_mdio_pin_mux();
- writel(0x40003, 0x44e10a74); /* Mux pin as clkout2 */
- writel(0x10006, 0x44df4108); /* Select EXTDEV as clock source */
- writel(0x4, 0x44df2e60); /* Set EXTDEV as MNbypass */
-
- /* For revision A */
- writel(0x2000009, 0x44df2e6c);
- writel(0x38a, 0x44df2e70);
- mdelay(10);
-
- gpio_request(GPIO_PHY1_RST, "phy1_rst");
- gpio_request(GPIO_PHY2_RST, "phy2_rst");
- gpio_direction_output(GPIO_PHY1_RST, 0);
- gpio_direction_output(GPIO_PHY2_RST, 0);
- mdelay(2);
-
- gpio_set_value(GPIO_PHY1_RST, 1);
- gpio_set_value(GPIO_PHY2_RST, 1);
- mdelay(2);
-}
-
-int board_eth_init(bd_t *bis)
-{
- int rv;
-
- set_rgmii_pin_mux();
- writel(RGMII_MODE_ENABLE | RGMII_INT_DELAY, &cdev->miisel);
- board_phy_init();
-
- rv = cpsw_register(&cpsw_data);
- if (rv < 0)
- printf("Error %d registering CPSW switch\n", rv);
-
- return rv;
-}
-#endif
generated by cgit v0.10.2 at 2024-11-09 00:54:00 (GMT)