summaryrefslogtreecommitdiff
path: root/board/congatec/cgtqmx6eval/README
diff options
context:
space:
mode:
Diffstat (limited to 'board/congatec/cgtqmx6eval/README')
-rw-r--r--board/congatec/cgtqmx6eval/README12
1 files changed, 6 insertions, 6 deletions
diff --git a/board/congatec/cgtqmx6eval/README b/board/congatec/cgtqmx6eval/README
index f2c9599..0777c78 100644
--- a/board/congatec/cgtqmx6eval/README
+++ b/board/congatec/cgtqmx6eval/README
@@ -3,10 +3,10 @@ U-Boot for the Congatec QMX6 boards
This file contains information for the port of U-Boot to the Congatec
QMX6 boards.
-1. Building U-boot
+1. Building U-Boot
------------------
-- Build U-boot for Congatec QMX6 boards:
+- Build U-Boot for Congatec QMX6 boards:
$ make mrproper
$ make cgtqmx6eval_defconfig
@@ -17,7 +17,7 @@ This will generate the following binaries:
- SPL
- u-boot.img
-2. Flashing U-boot in the SPI NOR
+2. Flashing U-Boot in the SPI NOR
---------------------------------
Copy SPL and u-boot.img to the exported TFTP directory of the
@@ -41,7 +41,7 @@ host PC (/tftpboot , for example).
=> sf write 0x12000000 0x10000 0x70000
-Reboot the board and the new U-boot should come up.
+Reboot the board and the new U-Boot should come up.
3. Booting from the SD card
---------------------------
@@ -64,9 +64,9 @@ command:
=> bmode esdhc4
-And then the U-boot from the big slot will boot.
+And then the U-Boot from the big slot will boot.
-Note: If the "bmode" command is not available from your pre-installed U-boot,
+Note: If the "bmode" command is not available from your pre-installed U-Boot,
these instruction will produce the same effect:
=> mw.l 0x20d8040 0x3850