1 files changed, 0 insertions, 120 deletions
diff --git a/board/davinci/da8xxevm/hawkboard.c b/board/davinci/da8xxevm/hawkboard.c
deleted file mode 100644
index d5992a5..0000000
--- a/board/davinci/da8xxevm/hawkboard.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Modified for Hawkboard - Syed Mohammed Khasim <khasim@beagleboard.org>
- *
- * Copyright (C) 2008 Sekhar Nori, Texas Instruments, Inc.  <nsekhar@ti.com>
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- * Copyright (C) 2004 Texas Instruments.
- * Copyright (C) 2012 Sughosh Ganu <urwithsughosh@gmail.com>.
- *
- * ----------------------------------------------------------------------------
- * SPDX-License-Identifier:	GPL-2.0+
- * ----------------------------------------------------------------------------
- */
-
-#include <common.h>
-#include <asm/errno.h>
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-#include <asm/arch/davinci_misc.h>
-#include <asm/arch/pinmux_defs.h>
-#include <asm/arch/da8xx-usb.h>
-#include <ns16550.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-const struct pinmux_resource pinmuxes[] = {
-	PINMUX_ITEM(emac_pins_mii),
-	PINMUX_ITEM(emac_pins_mdio),
-	PINMUX_ITEM(emifa_pins_cs3),
-	PINMUX_ITEM(emifa_pins_cs4),
-	PINMUX_ITEM(emifa_pins_nand),
-	PINMUX_ITEM(uart2_pins_txrx),
-	PINMUX_ITEM(uart2_pins_rtscts),
-};
-
-const int pinmuxes_size = ARRAY_SIZE(pinmuxes);
-
-const struct lpsc_resource lpsc[] = {
-	{ DAVINCI_LPSC_AEMIF },	/* NAND, NOR */
-	{ DAVINCI_LPSC_SPI1 },	/* Serial Flash */
-	{ DAVINCI_LPSC_EMAC },	/* image download */
-	{ DAVINCI_LPSC_UART2 },	/* console */
-	{ DAVINCI_LPSC_GPIO },
-};
-
-const int lpsc_size = ARRAY_SIZE(lpsc);
-
-int board_init(void)
-{
-	/* arch number of the board */
-	gd->bd->bi_arch_number = MACH_TYPE_OMAPL138_HAWKBOARD;
-
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
-	return 0;
-}
-
-int board_early_init_f(void)
-{
-	/*
-	 * Kick Registers need to be set to allow access to Pin Mux registers
-	 */
-	writel(DV_SYSCFG_KICK0_UNLOCK, &davinci_syscfg_regs->kick0);
-	writel(DV_SYSCFG_KICK1_UNLOCK, &davinci_syscfg_regs->kick1);
-
-	/* set cfgchip3 to select mii */
-	writel(readl(&davinci_syscfg_regs->cfgchip3) &
-	       ~(1 << 8), &davinci_syscfg_regs->cfgchip3);
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	char buf[32];
-
-	printf("ARM Clock : %s MHz\n",
-	       strmhz(buf, clk_get(DAVINCI_ARM_CLKID)));
-
-	return 0;
-}
-
-int usb_phy_on(void)
-{
-	u32 timeout;
-	u32 cfgchip2;
-
-	cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
-
-	cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN |
-		      CFGCHIP2_OTGMODE | CFGCHIP2_REFFREQ |
-		      CFGCHIP2_USB1PHYCLKMUX);
-	cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN | CFGCHIP2_PHY_PLLON |
-		    CFGCHIP2_REFFREQ_24MHZ | CFGCHIP2_USB2PHYCLKMUX |
-		    CFGCHIP2_USB1SUSPENDM;
-
-	writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
-
-	/* wait until the usb phy pll locks */
-	timeout = DA8XX_USB_OTG_TIMEOUT;
-	while (timeout--)
-		if (readl(&davinci_syscfg_regs->cfgchip2) & CFGCHIP2_PHYCLKGD)
-			return 1;
-
-	/* USB phy was not turned on */
-	return 0;
-}
-
-void usb_phy_off(void)
-{
-	u32 cfgchip2;
-
-	/*
-	 * Power down the on-chip PHY.
-	 */
-	cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
-	cfgchip2 &= ~(CFGCHIP2_PHY_PLLON | CFGCHIP2_USB1SUSPENDM);
-	cfgchip2 |= CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN | CFGCHIP2_RESET;
-	writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
-}