summaryrefslogtreecommitdiff
path: root/board/delta/nand.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/delta/nand.c')
-rw-r--r--board/delta/nand.c306
1 files changed, 306 insertions, 0 deletions
diff --git a/board/delta/nand.c b/board/delta/nand.c
new file mode 100644
index 0000000..9caddba
--- /dev/null
+++ b/board/delta/nand.c
@@ -0,0 +1,306 @@
+/*
+ * (C) Copyright 2006 DENX Software Engineering
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#ifdef CONFIG_NEW_NAND_CODE
+
+#include <nand.h>
+#include <asm/arch/pxa-regs.h>
+
+/*
+ * hardware specific access to control-lines
+ * function borrowed from Linux 2.6 (drivers/mtd/nand/ppchameleonevb.c)
+ */
+static void delta_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+{
+#if 0
+ struct nand_chip *this = mtdinfo->priv;
+ ulong base = (ulong) this->IO_ADDR_W;
+
+ switch(cmd) {
+ case NAND_CTL_SETCLE:
+ MACRO_NAND_CTL_SETCLE((unsigned long)base);
+ break;
+ case NAND_CTL_CLRCLE:
+ MACRO_NAND_CTL_CLRCLE((unsigned long)base);
+ break;
+ case NAND_CTL_SETALE:
+ MACRO_NAND_CTL_SETALE((unsigned long)base);
+ break;
+ case NAND_CTL_CLRALE:
+ MACRO_NAND_CTL_CLRALE((unsigned long)base);
+ break;
+ case NAND_CTL_SETNCE:
+ MACRO_NAND_ENABLE_CE((unsigned long)base);
+ break;
+ case NAND_CTL_CLRNCE:
+ MACRO_NAND_DISABLE_CE((unsigned long)base);
+ break;
+ }
+#endif
+}
+
+
+/* read device ready pin */
+static int delta_device_ready(struct mtd_info *mtdinfo)
+{
+ if(NDSR & NDSR_RDY)
+ return 1;
+ else
+ return 0;
+#if 0
+ struct nand_chip *this = mtdinfo->priv;
+ ulong rb_gpio_pin;
+
+ /* use the base addr to find out which chip are we dealing with */
+ switch((ulong) this->IO_ADDR_W) {
+ case CFG_NAND0_BASE:
+ rb_gpio_pin = CFG_NAND0_RDY;
+ break;
+ case CFG_NAND1_BASE:
+ rb_gpio_pin = CFG_NAND1_RDY;
+ break;
+ default: /* this should never happen */
+ return 0;
+ break;
+ }
+
+ if (in32(GPIO0_IR) & rb_gpio_pin)
+ return 1;
+#endif
+ return 0;
+}
+
+static u_char delta_read_byte(struct mtd_info *mtd)
+{
+/* struct nand_chip *this = mtd->priv; */
+ unsigned long tmp;
+
+ /* wait for read request */
+ while(1) {
+ if(NDSR & NDSR_RDDREQ) {
+ NDSR |= NDSR_RDDREQ;
+ break;
+ }
+ }
+
+ tmp = NDDB;
+ printk("delta_read_byte: 0x%x.\n", tmp);
+ return (u_char) tmp;
+}
+
+/* this is really monahans, not board specific ... */
+static void delta_cmdfunc(struct mtd_info *mtd, unsigned command,
+ int column, int page_addr)
+{
+ /* register struct nand_chip *this = mtd->priv; */
+ unsigned long ndcb0=0, ndcb1=0, ndcb2=0;
+ uchar command2;
+
+ /* Clear NDSR */
+ NDSR = 0xFFF;
+
+ /* apparently NDCR[NDRUN] needs to be set before writing to NDCBx */
+ NDCR |= NDCR_ND_RUN;
+
+ /* wait for write command request
+ * hmm, might be nice if this could time-out. mk@tbd
+ */
+ while(1) {
+ if(NDSR & NDSR_WRCMDREQ) {
+ NDSR |= NDSR_WRCMDREQ; /* Ack */
+ break;
+ }
+ }
+
+ /* if command is a double byte cmd, we set bit double cmd bit 19 */
+ command2 = (command>>8) & 0xFF;
+ ndcb0 = command | ((command2 ? 1 : 0) << 19);
+
+ switch (command) {
+ case NAND_CMD_READID:
+ printk("delta_cmdfunc: NAND_CMD_READID.\n");
+ ndcb0 |= ((3 << 21) | (2 << 16));
+ break;
+ case NAND_CMD_PAGEPROG:
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ case NAND_CMD_SEQIN:
+ case NAND_CMD_STATUS:
+ return;
+ case NAND_CMD_RESET:
+ return;
+ default:
+ printk("delta_cmdfunc: error, unkown command issued.\n");
+ return;
+ }
+
+ NDCB0 = ndcb0;
+ NDCB1 = ndcb1;
+ NDCB2 = ndcb2;
+}
+
+/*
+ * Board-specific NAND initialization. The following members of the
+ * argument are board-specific (per include/linux/mtd/nand_new.h):
+ * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
+ * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
+ * - hwcontrol: hardwarespecific function for accesing control-lines
+ * - dev_ready: hardwarespecific function for accesing device ready/busy line
+ * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must
+ * only be provided if a hardware ECC is available
+ * - eccmode: mode of ecc, see defines
+ * - chip_delay: chip dependent delay for transfering data from array to
+ * read regs (tR)
+ * - options: various chip options. They can partly be set to inform
+ * nand_scan about special functionality. See the defines for further
+ * explanation
+ * Members with a "?" were not set in the merged testing-NAND branch,
+ * so they are not set here either.
+ */
+void board_nand_init(struct nand_chip *nand)
+{
+ unsigned long tCH, tCS, tWH, tWP, tRH, tRP, tRP_high, tR, tWHR, tAR;
+
+ /* set up GPIO Control Registers */
+
+ /* turn on the NAND Controller Clock (104 MHz @ D0) */
+ CKENA |= (CKENA_4_NAND | CKENA_9_SMC);
+
+ /* NAND Timing Parameters (in ns) */
+#define NAND_TIMING_tCH 10
+#define NAND_TIMING_tCS 0
+#define NAND_TIMING_tWH 20
+#define NAND_TIMING_tWP 40
+#define NAND_TIMING_tRH 20
+#define NAND_TIMING_tRP 40
+#define NAND_TIMING_tR 11123
+#define NAND_TIMING_tWHR 110
+#define NAND_TIMING_tAR 10
+
+/* Maximum values for NAND Interface Timing Registers in DFC clock
+ * periods */
+#define DFC_MAX_tCH 7
+#define DFC_MAX_tCS 7
+#define DFC_MAX_tWH 7
+#define DFC_MAX_tWP 7
+#define DFC_MAX_tRH 7
+#define DFC_MAX_tRP 15
+#define DFC_MAX_tR 65535
+#define DFC_MAX_tWHR 15
+#define DFC_MAX_tAR 15
+
+#define DFC_CLOCK 104 /* DFC Clock is 104 MHz */
+#define DFC_CLK_PER_US DFC_CLOCK/1000 /* clock period in ns */
+#define MIN(x, y) ((x < y) ? x : y)
+
+
+ tCH = MIN(((unsigned long) (NAND_TIMING_tCH * DFC_CLK_PER_US) + 1),
+ DFC_MAX_tCH);
+ tCS = MIN(((unsigned long) (NAND_TIMING_tCS * DFC_CLK_PER_US) + 1),
+ DFC_MAX_tCS);
+ tWH = MIN(((unsigned long) (NAND_TIMING_tWH * DFC_CLK_PER_US) + 1),
+ DFC_MAX_tWH);
+ tWP = MIN(((unsigned long) (NAND_TIMING_tWP * DFC_CLK_PER_US) + 1),
+ DFC_MAX_tWP);
+ tRH = MIN(((unsigned long) (NAND_TIMING_tRH * DFC_CLK_PER_US) + 1),
+ DFC_MAX_tRH);
+ tRP = MIN(((unsigned long) (NAND_TIMING_tRP * DFC_CLK_PER_US) + 1),
+ DFC_MAX_tRP);
+ tR = MIN(((unsigned long) (NAND_TIMING_tR * DFC_CLK_PER_US) + 1),
+ DFC_MAX_tR);
+ tWHR = MIN(((unsigned long) (NAND_TIMING_tWHR * DFC_CLK_PER_US) + 1),
+ DFC_MAX_tWHR);
+ tAR = MIN(((unsigned long) (NAND_TIMING_tAR * DFC_CLK_PER_US) + 1),
+ DFC_MAX_tAR);
+
+
+ /* tRP value is split in the register */
+ if(tRP & (1 << 4)) {
+ tRP_high = 1;
+ tRP &= ~(1 << 4);
+ } else {
+ tRP_high = 0;
+ }
+
+ NDTR0CS0 = (tCH << 19) |
+ (tCS << 16) |
+ (tWH << 11) |
+ (tWP << 8) |
+ (tRP_high << 6) |
+ (tRH << 3) |
+ (tRP << 0);
+
+ NDTR1CS0 = (tR << 16) |
+ (tWHR << 4) |
+ (tAR << 0);
+
+
+
+ /* If it doesn't work (unlikely) think about:
+ * - ecc enable
+ * - chip select don't care
+ * - read id byte count
+ *
+ * Intentionally enabled by not setting bits:
+ * - dma (DMA_EN)
+ * - page size = 512
+ * - cs don't care, see if we can enable later!
+ * - row address start position (after second cycle)
+ * - pages per block = 32
+ */
+ NDCR = (NDCR_ND_ARB_EN | /* enable bus arbiter */
+ NDCR_SPARE_EN | /* use the spare area */
+ NDCR_DWIDTH_C | /* 16bit DFC data bus width */
+ NDCR_DWIDTH_M | /* 16 bit Flash device data bus width */
+ (2 << 16) | /* read id count = 7 ???? mk@tbd */
+ NDCE_RDYM | /* flash device ready ir masked */
+ NDCE_CS0_PAGEDM | /* ND_nCSx page done ir masked */
+ NDCE_CS1_PAGEDM |
+ NDCE_CS0_CMDDM | /* ND_CSx command done ir masked */
+ NDCE_CS1_CMDDM |
+ NDCE_CS0_BBDM | /* ND_CSx bad block detect ir masked */
+ NDCE_CS1_BBDM |
+ NDCE_DBERRM | /* double bit error ir masked */
+ NDCE_SBERRM | /* single bit error ir masked */
+ NDCE_WRDREQM | /* write data request ir masked */
+ NDCE_RDDREQM | /* read data request ir masked */
+ NDCE_WRCMDREQM); /* write command request ir masked */
+
+
+
+ nand->hwcontrol = delta_hwcontrol;
+ nand->dev_ready = delta_device_ready;
+ nand->eccmode = NAND_ECC_SOFT;
+ nand->chip_delay = NAND_DELAY_US;
+ nand->options = NAND_BUSWIDTH_16;
+ nand->read_byte = delta_read_byte;
+ nand->cmdfunc = delta_cmdfunc;
+ /* nand->options = NAND_SAMSUNG_LP_OPTIONS; */
+}
+
+#else
+#error "U-Boot legacy NAND support not available for delta board."
+#endif
+#endif