1 files changed, 0 insertions, 99 deletions
diff --git a/board/esd/common/xilinx_jtag/ports.c b/board/esd/common/xilinx_jtag/ports.c
deleted file mode 100644
index d79dbd1..0000000
--- a/board/esd/common/xilinx_jtag/ports.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * (C) Copyright 2003
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*******************************************************/
-/* file: ports.c                                       */
-/* abstract:  This file contains the routines to       */
-/*            output values on the JTAG ports, to read */
-/*            the TDO bit, and to read a byte of data  */
-/*            from the prom                            */
-/*                                                     */
-/*******************************************************/
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-
-#include "ports.h"
-
-static unsigned long output = 0;
-static int filepos = 0;
-static int oldstate = 0;
-static int newstate = 0;
-static int readptr = 0;
-
-extern const unsigned char *xsvfdata;
-
-/* if in debugging mode, then just set the variables */
-void setPort(short p,short val)
-{
-	if (p==TMS) {
-		if (val) {
-			output |= JTAG_TMS;
-		} else {
-			output &= ~JTAG_TMS;
-		}
-	}
-	if (p==TDI) {
-		if (val) {
-			output |= JTAG_TDI;
-		} else {
-			output &= ~JTAG_TDI;
-		}
-	}
-	if (p==TCK) {
-		if (val) {
-			output |= JTAG_TCK;
-		} else {
-			output &= ~JTAG_TCK;
-		}
-		out_be32((void *)GPIO0_OR, output);
-	}
-}
-
-
-/* toggle tck LH */
-void pulseClock(void)
-{
-	setPort(TCK,0);  /* set the TCK port to low  */
-	setPort(TCK,1);  /* set the TCK port to high */
-}
-
-
-/* read in a byte of data from the prom */
-void readByte(unsigned char *data)
-{
-	/* pretend reading using a file */
-	*data = xsvfdata[readptr++];
-	newstate = filepos++ >> 10;
-	if (newstate != oldstate) {
-		printf("%4d kB\r\r\r\r", newstate);
-		oldstate = newstate;
-	}
-}
-
-/* read the TDO bit from port */
-unsigned char readTDOBit(void)
-{
-	unsigned long inputs;
-
-	inputs = in_be32((void *)GPIO0_IR);
-	if (inputs & JTAG_TDO)
-		return 1;
-	else
-		return 0;
-}
-
-
-/* Wait at least the specified number of microsec.                           */
-/* Use a timer if possible; otherwise estimate the number of instructions    */
-/* necessary to be run based on the microcontroller speed.  For this example */
-/* we pulse the TCK port a number of times based on the processor speed.     */
-void waitTime(long microsec)
-{
-	udelay(microsec); /* esd */
-}