summaryrefslogtreecommitdiff
path: root/board/freescale/mpc8641hpcn/ddr.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale/mpc8641hpcn/ddr.c')
-rw-r--r--board/freescale/mpc8641hpcn/ddr.c147
1 files changed, 112 insertions, 35 deletions
diff --git a/board/freescale/mpc8641hpcn/ddr.c b/board/freescale/mpc8641hpcn/ddr.c
index 5163abf..517c6ee 100644
--- a/board/freescale/mpc8641hpcn/ddr.c
+++ b/board/freescale/mpc8641hpcn/ddr.c
@@ -10,6 +10,7 @@
#include <i2c.h>
#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
static void
get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
@@ -45,44 +46,120 @@ void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
}
}
-void fsl_ddr_board_options(memctl_options_t *popts, unsigned int ctrl_num)
+typedef struct {
+ u32 datarate_mhz_low;
+ u32 datarate_mhz_high;
+ u32 n_ranks;
+ u32 clk_adjust;
+ u32 cpo;
+ u32 write_data_delay;
+} board_specific_parameters_t;
+
+/* XXX: these values need to be checked for all interleaving modes. */
+const board_specific_parameters_t board_specific_parameters[2][16] = {
+ {
+ /* memory controller 0 */
+ /* lo| hi| num| clk| cpo|wrdata */
+ /* mhz| mhz|ranks|adjst| | delay */
+ { 0, 333, 4, 7, 7, 3},
+ {334, 400, 4, 7, 9, 3},
+ {401, 549, 4, 7, 9, 3},
+ {550, 650, 4, 7, 10, 4},
+
+ { 0, 333, 3, 7, 7, 3},
+ {334, 400, 3, 7, 9, 3},
+ {401, 549, 3, 7, 9, 3},
+ {550, 650, 3, 7, 10, 4},
+
+ { 0, 333, 2, 7, 7, 3},
+ {334, 400, 2, 7, 9, 3},
+ {401, 549, 2, 7, 9, 3},
+ {550, 650, 2, 7, 10, 4},
+
+ { 0, 333, 1, 7, 7, 3},
+ {334, 400, 1, 7, 9, 3},
+ {401, 549, 1, 7, 9, 3},
+ {550, 650, 1, 7, 10, 4}
+ },
+
+ {
+ /* memory controller 1 */
+ /* lo| hi| num| clk| cpo|wrdata */
+ /* mhz| mhz|ranks|adjst| | delay */
+ { 0, 333, 4, 7, 7, 3},
+ {334, 400, 4, 7, 9, 3},
+ {401, 549, 4, 7, 9, 3},
+ {550, 650, 4, 7, 10, 4},
+
+ { 0, 333, 3, 7, 7, 3},
+ {334, 400, 3, 7, 9, 3},
+ {401, 549, 3, 7, 9, 3},
+ {550, 650, 3, 7, 10, 4},
+
+ { 0, 333, 2, 7, 7, 3},
+ {334, 400, 2, 7, 9, 3},
+ {401, 549, 2, 7, 9, 3},
+ {550, 650, 2, 7, 10, 4},
+
+ { 0, 333, 1, 7, 7, 3},
+ {334, 400, 1, 7, 9, 3},
+ {401, 549, 1, 7, 9, 3},
+ {550, 650, 1, 7, 10, 4}
+ }
+};
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+ dimm_params_t *pdimm,
+ unsigned int ctrl_num)
{
- /*
- * Factors to consider for clock adjust:
- * - number of chips on bus
- * - position of slot
- * - DDR1 vs. DDR2?
- * - ???
- *
- * This needs to be determined on a board-by-board basis.
- * 0110 3/4 cycle late
- * 0111 7/8 cycle late
- */
- popts->clk_adjust = 7;
+ const board_specific_parameters_t *pbsp =
+ &(board_specific_parameters[ctrl_num][0]);
+ u32 num_params = sizeof(board_specific_parameters[ctrl_num]) /
+ sizeof(board_specific_parameters[0][0]);
+ u32 i;
+ u32 j;
+ ulong ddr_freq;
- /*
- * Factors to consider for CPO:
- * - frequency
- * - ddr1 vs. ddr2
+ /* set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in
+ * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If
+ * there are two dimms in the controller, set odt_rd_cfg to 3 and
+ * odt_wr_cfg to 3 for the even CS, 0 for the odd CS.
*/
- popts->cpo_override = 10;
-
- /*
- * Factors to consider for write data delay:
- * - number of DIMMs
- *
- * 1 = 1/4 clock delay
- * 2 = 1/2 clock delay
- * 3 = 3/4 clock delay
- * 4 = 1 clock delay
- * 5 = 5/4 clock delay
- * 6 = 3/2 clock delay
- */
- popts->write_data_delay = 3;
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ if (i&1) { /* odd CS */
+ popts->cs_local_opts[i].odt_rd_cfg = 0;
+ popts->cs_local_opts[i].odt_wr_cfg = 0;
+ } else { /* even CS */
+ if ((CONFIG_DIMM_SLOTS_PER_CTLR == 2) &&
+ (pdimm[i/2].n_ranks != 0)) {
+ popts->cs_local_opts[i].odt_rd_cfg = 3;
+ popts->cs_local_opts[i].odt_wr_cfg = 3;
+ } else {
+ popts->cs_local_opts[i].odt_rd_cfg = 0;
+ popts->cs_local_opts[i].odt_wr_cfg = 4;
+ }
+ }
+ }
- /*
- * Factors to consider for half-strength driver enable:
- * - number of DIMMs installed
+ /* Get clk_adjust, cpo, write_data_delay, according to the board ddr
+ * freqency and n_banks specified in board_specific_parameters table.
*/
- popts->half_strength_driver_enable = 0;
+ ddr_freq = fsl_ddr_get_mem_data_rate() / 1000000;
+ for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+ if (pdimm[j].n_ranks > 0) {
+ for (i = 0; i < num_params; i++) {
+ if (ddr_freq >= pbsp->datarate_mhz_low &&
+ ddr_freq <= pbsp->datarate_mhz_high &&
+ pdimm[j].n_ranks == pbsp->n_ranks) {
+ popts->clk_adjust = pbsp->clk_adjust;
+ popts->cpo_override = pbsp->cpo;
+ popts->write_data_delay =
+ pbsp->write_data_delay;
+ break;
+ }
+ pbsp++;
+ }
+ }
+ }
+
}