summaryrefslogtreecommitdiff
path: root/board/freescale/p1022ds/diu.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale/p1022ds/diu.c')
-rw-r--r--board/freescale/p1022ds/diu.c304
1 files changed, 304 insertions, 0 deletions
diff --git a/board/freescale/p1022ds/diu.c b/board/freescale/p1022ds/diu.c
new file mode 100644
index 0000000..12b40a0
--- /dev/null
+++ b/board/freescale/p1022ds/diu.c
@@ -0,0 +1,304 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ * Authors: Timur Tabi <timur@freescale.com>
+ *
+ * FSL DIU Framebuffer driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/io.h>
+#include <stdio_dev.h>
+#include <video_fb.h>
+#include "../common/ngpixis.h"
+#include <fsl_diu_fb.h>
+
+/* The CTL register is called 'csr' in the ngpixis_t structure */
+#define PX_CTL_ALTACC 0x80
+
+#define PX_BRDCFG0_ELBC_SPI_MASK 0xc0
+#define PX_BRDCFG0_ELBC_SPI_ELBC 0x00
+#define PX_BRDCFG0_ELBC_SPI_NULL 0xc0
+#define PX_BRDCFG0_ELBC_DIU 0x02
+
+#define PX_BRDCFG1_DVIEN 0x80
+#define PX_BRDCFG1_DFPEN 0x40
+#define PX_BRDCFG1_BACKLIGHT 0x20
+
+#define PMUXCR_ELBCDIU_MASK 0xc0000000
+#define PMUXCR_ELBCDIU_NOR16 0x80000000
+
+/*
+ * DIU Area Descriptor
+ *
+ * Note that we need to byte-swap the value before it's written to the AD
+ * register. So even though the registers don't look like they're in the same
+ * bit positions as they are on the MPC8610, the same value is written to the
+ * AD register on the MPC8610 and on the P1022.
+ */
+#define AD_BYTE_F 0x10000000
+#define AD_ALPHA_C_SHIFT 25
+#define AD_BLUE_C_SHIFT 23
+#define AD_GREEN_C_SHIFT 21
+#define AD_RED_C_SHIFT 19
+#define AD_PIXEL_S_SHIFT 16
+#define AD_COMP_3_SHIFT 12
+#define AD_COMP_2_SHIFT 8
+#define AD_COMP_1_SHIFT 4
+#define AD_COMP_0_SHIFT 0
+
+/*
+ * Variables used by the DIU/LBC switching code. It's safe to makes these
+ * global, because the DIU requires DDR, so we'll only run this code after
+ * relocation.
+ */
+static u8 px_brdcfg0;
+static u32 pmuxcr;
+static void *lbc_lcs0_ba;
+static void *lbc_lcs1_ba;
+
+void diu_set_pixel_clock(unsigned int pixclock)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ unsigned long speed_ccb, temp;
+ u32 pixval;
+
+ speed_ccb = get_bus_freq(0);
+ temp = 1000000000 / pixclock;
+ temp *= 1000;
+ pixval = speed_ccb / temp;
+ debug("DIU pixval = %lu\n", pixval);
+
+ /* Modify PXCLK in GUTS CLKDVDR */
+ temp = in_be32(&gur->clkdvdr) & 0x2000FFFF;
+ out_be32(&gur->clkdvdr, temp); /* turn off clock */
+ out_be32(&gur->clkdvdr, temp | 0x80000000 | ((pixval & 0x1F) << 16));
+}
+
+int platform_diu_init(unsigned int *xres, unsigned int *yres)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ char *monitor_port;
+ u32 pixel_format;
+ u8 temp;
+
+ /* Save the LBC LCS0 and LCS1 addresses for the DIU mux functions */
+ lbc_lcs0_ba = (void *)(get_lbc_br(0) & get_lbc_or(0) & 0xFFFF8000);
+ lbc_lcs1_ba = (void *)(get_lbc_br(1) & get_lbc_or(1) & 0xFFFF8000);
+
+ pixel_format = cpu_to_le32(AD_BYTE_F | (3 << AD_ALPHA_C_SHIFT) |
+ (0 << AD_BLUE_C_SHIFT) | (1 << AD_GREEN_C_SHIFT) |
+ (2 << AD_RED_C_SHIFT) | (8 << AD_COMP_3_SHIFT) |
+ (8 << AD_COMP_2_SHIFT) | (8 << AD_COMP_1_SHIFT) |
+ (8 << AD_COMP_0_SHIFT) | (3 << AD_PIXEL_S_SHIFT));
+
+ temp = in_8(&pixis->brdcfg1);
+
+ monitor_port = getenv("monitor");
+ if (!strncmp(monitor_port, "1", 1)) { /* 1 - Single link LVDS */
+ *xres = 1024;
+ *yres = 768;
+ /* Enable the DFP port, disable the DVI and the backlight */
+ temp &= ~(PX_BRDCFG1_DVIEN | PX_BRDCFG1_BACKLIGHT);
+ temp |= PX_BRDCFG1_DFPEN;
+ } else { /* DVI */
+ *xres = 1280;
+ *yres = 1024;
+ /* Enable the DVI port, disable the DFP and the backlight */
+ temp &= ~(PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT);
+ temp |= PX_BRDCFG1_DVIEN;
+ }
+
+ out_8(&pixis->brdcfg1, temp);
+
+ /*
+ * Enable PIXIS indirect access mode. This is a hack that allows us to
+ * access PIXIS registers even when the LBC pins have been muxed to the
+ * DIU.
+ */
+ setbits_8(&pixis->csr, PX_CTL_ALTACC);
+
+ /*
+ * Route the LAD pins to the DIU. This will disable access to the eLBC,
+ * which means we won't be able to read/write any NOR flash addresses!
+ */
+ out_8(lbc_lcs0_ba, offsetof(ngpixis_t, brdcfg0));
+ px_brdcfg0 = in_8(lbc_lcs1_ba);
+ out_8(lbc_lcs1_ba, px_brdcfg0 | PX_BRDCFG0_ELBC_DIU);
+
+ /* Setting PMUXCR to switch to DVI from ELBC */
+ clrsetbits_be32(&gur->pmuxcr,
+ PMUXCR_ELBCDIU_MASK, PMUXCR_ELBCDIU_NOR16);
+ pmuxcr = in_be32(&gur->pmuxcr);
+
+ return fsl_diu_init(*xres, pixel_format, 0);
+}
+
+#ifdef CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
+
+/*
+ * set_mux_to_lbc - disable the DIU so that we can read/write to elbc
+ *
+ * On the Freescale P1022, the DIU video signal and the LBC address/data lines
+ * share the same pins, which means that when the DIU is active (e.g. the
+ * console is on the DVI display), NOR flash cannot be accessed. So we use the
+ * weak accessor feature of the CFI flash code to temporarily switch the pin
+ * mux from DIU to LBC whenever we want to read or write flash. This has a
+ * significant performance penalty, but it's the only way to make it work.
+ *
+ * There are two muxes: one on the chip, and one on the board. The chip mux
+ * controls whether the pins are used for the DIU or the LBC, and it is
+ * set via PMUXCR. The board mux controls whether those signals go to
+ * the video connector or the NOR flash chips, and it is set via the ngPIXIS.
+ */
+static int set_mux_to_lbc(void)
+{
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+
+ /* Switch the muxes only if they're currently set to DIU mode */
+ if ((in_be32(&gur->pmuxcr) & PMUXCR_ELBCDIU_MASK) ==
+ PMUXCR_ELBCDIU_NOR16) {
+ /*
+ * In DIU mode, the PIXIS can only be accessed indirectly
+ * since we can't read/write the LBC directly.
+ */
+
+ /* Set the board mux to LBC. This will disable the display. */
+ out_8(lbc_lcs0_ba, offsetof(ngpixis_t, brdcfg0));
+ px_brdcfg0 = in_8(lbc_lcs1_ba);
+ out_8(lbc_lcs1_ba, (px_brdcfg0 & ~(PX_BRDCFG0_ELBC_SPI_MASK
+ | PX_BRDCFG0_ELBC_DIU)) | PX_BRDCFG0_ELBC_SPI_ELBC);
+
+ /* Disable indirect PIXIS mode */
+ out_8(lbc_lcs0_ba, offsetof(ngpixis_t, csr));
+ clrbits_8(lbc_lcs1_ba, PX_CTL_ALTACC);
+
+ /* Set the chip mux to LBC mode, so that writes go to flash. */
+ out_be32(&gur->pmuxcr, (pmuxcr & ~PMUXCR_ELBCDIU_MASK) |
+ PMUXCR_ELBCDIU_NOR16);
+ in_be32(&gur->pmuxcr);
+
+ return 1;
+ }
+
+ return 0;
+}
+
+/*
+ * set_mux_to_diu - re-enable the DIU muxing
+ *
+ * This function restores the chip and board muxing to point to the DIU.
+ */
+static void set_mux_to_diu(void)
+{
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+
+ /* Enable indirect PIXIS mode */
+ setbits_8(&pixis->csr, PX_CTL_ALTACC);
+
+ /* Set the board mux to DIU. This will enable the display. */
+ out_8(lbc_lcs0_ba, offsetof(ngpixis_t, brdcfg0));
+ out_8(lbc_lcs1_ba, px_brdcfg0);
+ in_8(lbc_lcs1_ba);
+
+ /* Set the chip mux to DIU mode. */
+ out_be32(&gur->pmuxcr, pmuxcr);
+ in_be32(&gur->pmuxcr);
+}
+
+void flash_write8(u8 value, void *addr)
+{
+ int sw = set_mux_to_lbc();
+
+ __raw_writeb(value, addr);
+ if (sw)
+ set_mux_to_diu();
+}
+
+void flash_write16(u16 value, void *addr)
+{
+ int sw = set_mux_to_lbc();
+
+ __raw_writew(value, addr);
+ if (sw)
+ set_mux_to_diu();
+}
+
+void flash_write32(u32 value, void *addr)
+{
+ int sw = set_mux_to_lbc();
+
+ __raw_writel(value, addr);
+ if (sw)
+ set_mux_to_diu();
+}
+
+void flash_write64(u64 value, void *addr)
+{
+ int sw = set_mux_to_lbc();
+
+ /* There is no __raw_writeq(), so do the write manually */
+ *(volatile u64 *)addr = value;
+ if (sw)
+ set_mux_to_diu();
+}
+
+u8 flash_read8(void *addr)
+{
+ u8 ret;
+
+ int sw = set_mux_to_lbc();
+
+ ret = __raw_readb(addr);
+ if (sw)
+ set_mux_to_diu();
+
+ return ret;
+}
+
+u16 flash_read16(void *addr)
+{
+ u16 ret;
+
+ int sw = set_mux_to_lbc();
+
+ ret = __raw_readw(addr);
+ if (sw)
+ set_mux_to_diu();
+
+ return ret;
+}
+
+u32 flash_read32(void *addr)
+{
+ u32 ret;
+
+ int sw = set_mux_to_lbc();
+
+ ret = __raw_readl(addr);
+ if (sw)
+ set_mux_to_diu();
+
+ return ret;
+}
+
+u64 flash_read64(void *addr)
+{
+ u64 ret;
+
+ int sw = set_mux_to_lbc();
+
+ /* There is no __raw_readq(), so do the read manually */
+ ret = *(volatile u64 *)addr;
+ if (sw)
+ set_mux_to_diu();
+
+ return ret;
+}
+
+#endif