summaryrefslogtreecommitdiff
path: root/board/freescale/t4qds/README
diff options
context:
space:
mode:
Diffstat (limited to 'board/freescale/t4qds/README')
-rw-r--r--board/freescale/t4qds/README18
1 files changed, 9 insertions, 9 deletions
diff --git a/board/freescale/t4qds/README b/board/freescale/t4qds/README
index 3962fee..bf23814 100644
--- a/board/freescale/t4qds/README
+++ b/board/freescale/t4qds/README
@@ -86,7 +86,7 @@ Board Features
10GBASE-KR scenario.
So, for XFI usage, there are two scenarios, one will use fiber cable,
another will use copper cable. An hwconfig env "fsl_10gkr_copper" is
- introduced to indicate a XFI port will use copper cable, and U-boot
+ introduced to indicate a XFI port will use copper cable, and U-Boot
will fixup the dtb accordingly.
It's used as: fsl_10gkr_copper:<10g_mac_name>
The <10g_mac_name> can be fm1_10g1, fm1_10g2, fm2_10g1, fm2_10g2, they
@@ -118,7 +118,7 @@ The physical address of the last (boot page translation) varies with the actual
Voltage ID and VDD override
--------------------
-T4240 has a VID feature. U-boot reads the VID efuses and adjust the voltage
+T4240 has a VID feature. U-Boot reads the VID efuses and adjust the voltage
accordingly. The voltage can also be override by command vdd_override. The
syntax is
@@ -144,8 +144,8 @@ Users can set the final voltage directly.
-------------------------------
PBL initializes the internal SRAM and copy SPL(160K) in SRAM.
SPL further initialise DDR using SPD and environment variables
-and copy u-boot(768 KB) from NAND/SD device to DDR.
-Finally SPL transers control to u-boot for futher booting.
+and copy U-Boot(768 KB) from NAND/SD device to DDR.
+Finally SPL transers control to U-Boot for futher booting.
SPL has following features:
- Executes within 256K
@@ -165,21 +165,21 @@ Run time view of SPL framework
-------------------------------------------------
|STACK | 0xFFFD8000 (22KB) |
-------------------------------------------------
-|U-boot SPL | 0xFFFD8000 (160KB) |
+|U-Boot SPL | 0xFFFD8000 (160KB) |
-------------------------------------------------
NAND Flash memory Map on T4QDS
--------------------------------------------------------------
Start End Definition Size
-0x000000 0x0FFFFF u-boot img 1MB
-0x140000 0x15FFFF u-boot env 128KB
+0x000000 0x0FFFFF U-Boot img 1MB
+0x140000 0x15FFFF U-Boot env 128KB
0x160000 0x17FFFF FMAN Ucode 128KB
Micro SD Card memory Map on T4QDS
----------------------------------------------------
Block #blocks Definition Size
-0x008 2048 u-boot img 1MB
-0x800 0016 u-boot env 8KB
+0x008 2048 U-Boot img 1MB
+0x800 0016 U-Boot env 8KB
0x820 0128 FMAN ucode 64KB
Switch Settings: (ON is 1, OFF is 0)