diff options
Diffstat (limited to 'board/freescale')
-rw-r--r-- | board/freescale/ls2080a/ls2080a.c | 6 | ||||
-rw-r--r-- | board/freescale/ls2080aqds/MAINTAINERS | 1 | ||||
-rw-r--r-- | board/freescale/ls2080aqds/README | 13 | ||||
-rw-r--r-- | board/freescale/ls2080aqds/eth.c | 4 | ||||
-rw-r--r-- | board/freescale/ls2080aqds/ls2080aqds.c | 4 |
5 files changed, 21 insertions, 7 deletions
diff --git a/board/freescale/ls2080a/ls2080a.c b/board/freescale/ls2080a/ls2080a.c index ecf4bd6..41417e9 100644 --- a/board/freescale/ls2080a/ls2080a.c +++ b/board/freescale/ls2080a/ls2080a.c @@ -64,13 +64,13 @@ int board_eth_init(bd_t *bis) error = smc91111_initialize(0, CONFIG_SMC91111_BASE); #endif -#ifdef CONFIG_FSL_MC_ENET +#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) error = cpu_eth_init(bis); #endif return error; } -#ifdef CONFIG_FSL_MC_ENET +#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) void fdt_fixup_board_enet(void *fdt) { int offset; @@ -128,7 +128,7 @@ int ft_board_setup(void *blob, bd_t *bd) fdt_fixup_memory_banks(blob, base, size, 2); -#ifdef CONFIG_FSL_MC_ENET +#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) fdt_fixup_board_enet(blob); #endif diff --git a/board/freescale/ls2080aqds/MAINTAINERS b/board/freescale/ls2080aqds/MAINTAINERS index 79877d7..62c8fac 100644 --- a/board/freescale/ls2080aqds/MAINTAINERS +++ b/board/freescale/ls2080aqds/MAINTAINERS @@ -7,6 +7,7 @@ F: include/configs/ls2080aqds.h F: configs/ls2080aqds_defconfig F: configs/ls2080aqds_nand_defconfig F: configs/ls2080aqds_qspi_defconfig +F: configs/ls2080aqds_sdcard_defconfig LS2080A_SECURE_BOOT BOARD M: Saksham Jain <saksham.jain@nxp.freescale.com> diff --git a/board/freescale/ls2080aqds/README b/board/freescale/ls2080aqds/README index cad860e..8e31e9e 100644 --- a/board/freescale/ls2080aqds/README +++ b/board/freescale/ls2080aqds/README @@ -102,6 +102,19 @@ DPAA2 DPL 0x00D00000 DPAA2 DPC 0x00E00000 Kernel.itb 0x01000000 +Memory map for SD boot +------------------------- +Image Flash Offset SD Card + Start Block No. +RCW+PBI 0x00000000 0x00008 +Boot firmware (U-Boot) 0x00100000 0x00800 +Boot firmware Environment 0x00300000 0x01800 +PPA firmware 0x00400000 0x02000 +DPAA2 MC 0x00A00000 0x05000 +DPAA2 DPL 0x00D00000 0x06800 +DPAA2 DPC 0x00E00000 0x07000 +Kernel.itb 0x01000000 0x08000 + Environment Variables --------------------- - mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined diff --git a/board/freescale/ls2080aqds/eth.c b/board/freescale/ls2080aqds/eth.c index 8c44aac..defcac5 100644 --- a/board/freescale/ls2080aqds/eth.c +++ b/board/freescale/ls2080aqds/eth.c @@ -23,7 +23,7 @@ #define MC_BOOT_ENV_VAR "mcinitcmd" -#ifdef CONFIG_FSL_MC_ENET +#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) /* - In LS2080A there are only 16 SERDES lanes, spread across 2 SERDES banks. * Bank 1 -> Lanes A, B, C, D, E, F, G, H * Bank 2 -> Lanes A,B, C, D, E, F, G, H @@ -835,7 +835,7 @@ void ls2080a_handle_phy_interface_xsgmii(int i) int board_eth_init(bd_t *bis) { int error; -#ifdef CONFIG_FSL_MC_ENET +#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; int serdes1_prtcl = (in_le32(&gur->rcwsr[28]) & FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK) diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c index 6da9c6c..f36fb98 100644 --- a/board/freescale/ls2080aqds/ls2080aqds.c +++ b/board/freescale/ls2080aqds/ls2080aqds.c @@ -280,7 +280,7 @@ int arch_misc_init(void) } #endif -#ifdef CONFIG_FSL_MC_ENET +#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) void fdt_fixup_board_enet(void *fdt) { int offset; @@ -336,7 +336,7 @@ int ft_board_setup(void *blob, bd_t *bd) fsl_fdt_fixup_dr_usb(blob, bd); -#ifdef CONFIG_FSL_MC_ENET +#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD) fdt_fixup_board_enet(blob); #endif |