diff options
Diffstat (limited to 'board/freescale')
52 files changed, 1595 insertions, 288 deletions
diff --git a/board/freescale/common/fman.c b/board/freescale/common/fman.c index 26cf517..b5025ab 100644 --- a/board/freescale/common/fman.c +++ b/board/freescale/common/fman.c @@ -52,6 +52,8 @@ int fdt_set_phy_handle(void *fdt, char *compat, phys_addr_t addr, if (!ph) return -FDT_ERR_BADPHANDLE; + ph = cpu_to_fdt32(ph); + offset = fdt_node_offset_by_compat_reg(fdt, compat, addr); if (offset < 0) return offset; diff --git a/board/freescale/common/fsl_validate.c b/board/freescale/common/fsl_validate.c index 73b6718..b510c71 100644 --- a/board/freescale/common/fsl_validate.c +++ b/board/freescale/common/fsl_validate.c @@ -15,7 +15,7 @@ #include <u-boot/rsa-mod-exp.h> #include <hash.h> #include <fsl_secboot_err.h> -#ifndef CONFIG_MPC85xx +#ifdef CONFIG_LS102XA #include <asm/arch/immap_ls102xa.h> #endif @@ -99,7 +99,8 @@ int get_csf_base_addr(u32 *csf_addr, u32 *flash_base_addr) struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); u32 csf_hdr_addr = in_be32(&gur->scratchrw[0]); - if (memcmp((u8 *)csf_hdr_addr, barker_code, ESBC_BARKER_LEN)) + if (memcmp((u8 *)(uintptr_t)csf_hdr_addr, + barker_code, ESBC_BARKER_LEN)) return -1; *csf_addr = csf_hdr_addr; @@ -117,7 +118,7 @@ static int get_ie_info_addr(u32 *ie_addr) if (get_csf_base_addr(&csf_addr, &flash_base_addr)) return -1; - hdr = (struct fsl_secboot_img_hdr *)csf_addr; + hdr = (struct fsl_secboot_img_hdr *)(uintptr_t)csf_addr; /* For SoC's with Trust Architecture v1 with corenet bus * the sg table field in CSF header has absolute address @@ -130,7 +131,7 @@ static int get_ie_info_addr(u32 *ie_addr) (((u32)hdr->psgtable & ~(CONFIG_SYS_PBI_FLASH_BASE)) + flash_base_addr); #else - sg_tbl = (struct fsl_secboot_sg_table *)(csf_addr + + sg_tbl = (struct fsl_secboot_sg_table *)(uintptr_t)(csf_addr + (u32)hdr->psgtable); #endif @@ -379,8 +380,8 @@ static int calc_img_key_hash(struct fsl_secboot_img_priv *img) #ifdef CONFIG_KEY_REVOCATION if (check_srk(img)) { ret = algo->hash_update(algo, ctx, - (u8 *)(img->ehdrloc + img->hdr.srk_tbl_off), - img->hdr.len_kr.num_srk * sizeof(struct srk_table), 1); + (u8 *)(uintptr_t)(img->ehdrloc + img->hdr.srk_tbl_off), + img->hdr.len_kr.num_srk * sizeof(struct srk_table), 1); srk = 1; } #endif @@ -438,8 +439,8 @@ static int calc_esbchdr_esbc_hash(struct fsl_secboot_img_priv *img) #ifdef CONFIG_KEY_REVOCATION if (check_srk(img)) { ret = algo->hash_update(algo, ctx, - (u8 *)(img->ehdrloc + img->hdr.srk_tbl_off), - img->hdr.len_kr.num_srk * sizeof(struct srk_table), 0); + (u8 *)(uintptr_t)(img->ehdrloc + img->hdr.srk_tbl_off), + img->hdr.len_kr.num_srk * sizeof(struct srk_table), 0); key_hash = 1; } #endif @@ -454,8 +455,13 @@ static int calc_esbchdr_esbc_hash(struct fsl_secboot_img_priv *img) return ret; /* Update hash for actual Image */ +#ifdef CONFIG_ESBC_ADDR_64BIT ret = algo->hash_update(algo, ctx, - (u8 *)img->hdr.pimg, img->hdr.img_size, 1); + (u8 *)(uintptr_t)img->hdr.pimg64, img->hdr.img_size, 1); +#else + ret = algo->hash_update(algo, ctx, + (u8 *)(uintptr_t)img->hdr.pimg, img->hdr.img_size, 1); +#endif if (ret) return ret; @@ -533,7 +539,7 @@ static int read_validate_esbc_client_header(struct fsl_secboot_img_priv *img) { char buf[20]; struct fsl_secboot_img_hdr *hdr = &img->hdr; - void *esbc = (u8 *)img->ehdrloc; + void *esbc = (u8 *)(uintptr_t)img->ehdrloc; u8 *k, *s; #ifdef CONFIG_KEY_REVOCATION u32 ret; @@ -549,7 +555,11 @@ static int read_validate_esbc_client_header(struct fsl_secboot_img_priv *img) if (memcmp(hdr->barker, barker_code, ESBC_BARKER_LEN)) return ERROR_ESBC_CLIENT_HEADER_BARKER; +#ifdef CONFIG_ESBC_ADDR_64BIT + sprintf(buf, "%llx", hdr->pimg64); +#else sprintf(buf, "%x", hdr->pimg); +#endif setenv("img_addr", buf); if (!hdr->img_size) @@ -594,7 +604,7 @@ static int read_validate_esbc_client_header(struct fsl_secboot_img_priv *img) if (!key_found && check_ie(img)) { if (get_ie_info_addr(&img->ie_addr)) return ERROR_IE_TABLE_NOT_FOUND; - ie_info = (struct ie_key_info *)img->ie_addr; + ie_info = (struct ie_key_info *)(uintptr_t)img->ie_addr; if (ie_info->num_keys == 0 || ie_info->num_keys > 32) return ERROR_ESBC_CLIENT_HEADER_INVALID_IE_NUM_ENTRY; @@ -748,7 +758,7 @@ int fsl_secboot_validate(cmd_tbl_t *cmdtp, int flag, int argc, hdr = &img->hdr; img->ehdrloc = addr; - esbc = (u8 *)img->ehdrloc; + esbc = (u8 *)(uintptr_t)img->ehdrloc; memcpy(hdr, esbc, sizeof(struct fsl_secboot_img_hdr)); diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c index 6b8af14..f1bed51 100644 --- a/board/freescale/common/vid.c +++ b/board/freescale/common/vid.c @@ -7,7 +7,12 @@ #include <common.h> #include <command.h> #include <i2c.h> +#include <asm/io.h> +#ifdef CONFIG_LS1043A +#include <asm/arch/immap_lsch2.h> +#else #include <asm/immap_85xx.h> +#endif #include "vid.h" DECLARE_GLOBAL_DATA_PTR; @@ -240,7 +245,11 @@ static int set_voltage_to_IR(int i2caddress, int vdd) * SoC before converting into an IR VID value */ vdd += board_vdd_drop_compensation(); +#ifdef CONFIG_LS1043A + vid = DIV_ROUND_UP(vdd - 265, 5); +#else vid = DIV_ROUND_UP(vdd - 245, 5); +#endif ret = i2c_write(i2caddress, IR36021_LOOP1_MANUAL_ID_OFFSET, 1, (void *)&vid, sizeof(vid)); @@ -276,8 +285,12 @@ static int set_voltage(int i2caddress, int vdd) int adjust_vdd(ulong vdd_override) { int re_enable = disable_interrupts(); +#ifdef CONFIG_LS1043A + struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); +#else ccsr_gur_t __iomem *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +#endif u32 fusesr; u8 vid; int vdd_target, vdd_current, vdd_last; @@ -352,12 +365,21 @@ int adjust_vdd(ulong vdd_override) * | T | | | | | * ------------------------------------------------------ */ +#ifdef CONFIG_LS1043A + vid = (fusesr >> FSL_CHASSIS2_DCFG_FUSESR_ALTVID_SHIFT) & + FSL_CHASSIS2_DCFG_FUSESR_ALTVID_MASK; + if ((vid == 0) || (vid == FSL_CHASSIS2_DCFG_FUSESR_ALTVID_MASK)) { + vid = (fusesr >> FSL_CHASSIS2_DCFG_FUSESR_VID_SHIFT) & + FSL_CHASSIS2_DCFG_FUSESR_VID_MASK; + } +#else vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT) & FSL_CORENET_DCFG_FUSESR_ALTVID_MASK; if ((vid == 0) || (vid == FSL_CORENET_DCFG_FUSESR_ALTVID_MASK)) { vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_VID_SHIFT) & FSL_CORENET_DCFG_FUSESR_VID_MASK; } +#endif vdd_target = vdd[vid]; /* check override variable for overriding VDD */ diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index d889ad5..be3358a 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -11,6 +11,7 @@ #include <asm/arch/clock.h> #include <asm/arch/fsl_serdes.h> #include <asm/arch/ls102xa_stream_id.h> +#include <asm/arch/ls102xa_soc.h> #include <asm/arch/ls102xa_devdis.h> #include <asm/arch/ls102xa_sata.h> #include <hwconfig.h> @@ -140,17 +141,6 @@ unsigned long get_board_ddr_clk(void) return 66666666; } -unsigned int get_soc_major_rev(void) -{ - struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); - unsigned int svr, major; - - svr = in_be32(&gur->svr); - major = SVR_MAJ(svr); - - return major; -} - int select_i2c_ch_pca9547(u8 ch) { int ret; @@ -193,8 +183,6 @@ int board_mmc_init(bd_t *bis) int board_early_init_f(void) { struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; - struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; - unsigned int major; #ifdef CONFIG_TSEC_ENET /* clear BD & FR bits for BE BD's and frame data */ @@ -205,40 +193,7 @@ int board_early_init_f(void) init_early_memctl_regs(); #endif -#ifdef CONFIG_FSL_QSPI - out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL); -#endif - -#ifdef CONFIG_FSL_DCU_FB - out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN); -#endif - - /* Configure Little endian for SAI, ASRC and SPDIF */ - out_be32(&scfg->endiancr, SCFG_ENDIANCR_LE); - - /* - * Enable snoop requests and DVM message requests for - * Slave insterface S4 (A7 core cluster) - */ - out_le32(&cci->slave[4].snoop_ctrl, - CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN); - - major = get_soc_major_rev(); - if (major == SOC_MAJOR_VER_1_0) { - /* - * Set CCI-400 Slave interface S1, S2 Shareable Override - * Register All transactions are treated as non-shareable - */ - out_le32(&cci->slave[1].sha_ord, CCI400_SHAORD_NON_SHAREABLE); - out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE); - - /* Workaround for the issue that DDR could not respond to - * barrier transaction which is generated by executing DSB/ISB - * instruction. Set CCI-400 control override register to - * terminate the barrier transaction. After DDR is initialized, - * allow barrier transaction to DDR again */ - out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER); - } + arch_soc_init(); #if defined(CONFIG_DEEP_SLEEP) if (is_warm_boot()) diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index 4918c11..8eaff5f 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -12,6 +12,7 @@ #include <asm/arch/fsl_serdes.h> #include <asm/arch/ls102xa_stream_id.h> #include <asm/arch/ls102xa_devdis.h> +#include <asm/arch/ls102xa_soc.h> #include <asm/arch/ls102xa_sata.h> #include <hwconfig.h> #include <mmc.h> @@ -138,17 +139,6 @@ int checkboard(void) return 0; } -unsigned int get_soc_major_rev(void) -{ - struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); - unsigned int svr, major; - - svr = in_be32(&gur->svr); - major = SVR_MAJ(svr); - - return major; -} - void ddrmc_init(void) { struct ccsr_ddr *ddr = (struct ccsr_ddr *)CONFIG_SYS_FSL_DDR_ADDR; @@ -394,8 +384,6 @@ conflict: int board_early_init_f(void) { struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; - struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; - unsigned int major; #ifdef CONFIG_TSEC_ENET /* clear BD & FR bits for BE BD's and frame data */ @@ -407,33 +395,7 @@ int board_early_init_f(void) init_early_memctl_regs(); #endif -#ifdef CONFIG_FSL_DCU_FB - out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN); -#endif - -#ifdef CONFIG_FSL_QSPI - out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL); -#endif - - /* Configure Little endian for SAI, ASRC and SPDIF */ - out_be32(&scfg->endiancr, SCFG_ENDIANCR_LE); - - /* - * Enable snoop requests and DVM message requests for - * Slave insterface S4 (A7 core cluster) - */ - out_le32(&cci->slave[4].snoop_ctrl, - CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN); - - major = get_soc_major_rev(); - if (major == SOC_MAJOR_VER_1_0) { - /* - * Set CCI-400 Slave interface S1, S2 Shareable Override - * Register All transactions are treated as non-shareable - */ - out_le32(&cci->slave[1].sha_ord, CCI400_SHAORD_NON_SHAREABLE); - out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE); - } + arch_soc_init(); #if defined(CONFIG_DEEP_SLEEP) if (is_warm_boot()) { diff --git a/board/freescale/ls1043aqds/Kconfig b/board/freescale/ls1043aqds/Kconfig new file mode 100644 index 0000000..7e27f8f --- /dev/null +++ b/board/freescale/ls1043aqds/Kconfig @@ -0,0 +1,15 @@ +if TARGET_LS1043AQDS + +config SYS_BOARD + default "ls1043aqds" + +config SYS_VENDOR + default "freescale" + +config SYS_SOC + default "fsl-layerscape" + +config SYS_CONFIG_NAME + default "ls1043aqds" + +endif diff --git a/board/freescale/ls1043aqds/MAINTAINERS b/board/freescale/ls1043aqds/MAINTAINERS new file mode 100644 index 0000000..0c7f648 --- /dev/null +++ b/board/freescale/ls1043aqds/MAINTAINERS @@ -0,0 +1,9 @@ +LS1043AQDS BOARD +M: Mingkai Hu <Mingkai.Hu@freescale.com> +S: Maintained +F: board/freescale/ls1043aqds/ +F: include/configs/ls1043aqds.h +F: configs/ls1043aqds_defconfig +F: configs/ls1043aqds_nor_ddr3_defconfig +F: configs/ls1043aqds_nand_defconfig +F: configs/ls1043aqds_sdcard_ifc_defconfig diff --git a/board/freescale/ls1043aqds/Makefile b/board/freescale/ls1043aqds/Makefile new file mode 100644 index 0000000..f727bfd --- /dev/null +++ b/board/freescale/ls1043aqds/Makefile @@ -0,0 +1,9 @@ +# +# Copyright 2015 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += ddr.o +obj-y += eth.o +obj-y += ls1043aqds.o diff --git a/board/freescale/ls1043aqds/README b/board/freescale/ls1043aqds/README new file mode 100644 index 0000000..6261a77 --- /dev/null +++ b/board/freescale/ls1043aqds/README @@ -0,0 +1,96 @@ +Overview +-------- +The LS1043A Development System (QDS) is a high-performance computing, +evaluation, and development platform that supports the QorIQ LS1043A +LayerScape Architecture processor. The LS1043AQDS provides SW development +platform for the Freescale LS1043A processor series, with a complete +debugging environment. + +LS1043A SoC Overview +-------------------- +The LS1043A integrated multicore processor combines four ARM Cortex-A53 +processor cores with datapath acceleration optimized for L2/3 packet +processing, single pass security offload and robust traffic management +and quality of service. + +The LS1043A SoC includes the following function and features: + - Four 64-bit ARM Cortex-A53 CPUs + - 1 MB unified L2 Cache + - One 32-bit DDR3L/DDR4 SDRAM memory controllers with ECC and interleaving + support + - Data Path Acceleration Architecture (DPAA) incorporating acceleration the + the following functions: + - Packet parsing, classification, and distribution (FMan) + - Queue management for scheduling, packet sequencing, and congestion + management (QMan) + - Hardware buffer management for buffer allocation and de-allocation (BMan) + - Cryptography acceleration (SEC) + - Ethernet interfaces by FMan + - Up to 1 x XFI supporting 10G interface + - Up to 1 x QSGMII + - Up to 4 x SGMII supporting 1000Mbps + - Up to 2 x SGMII supporting 2500Mbps + - Up to 2 x RGMII supporting 1000Mbps + - High-speed peripheral interfaces + - Three PCIe 2.0 controllers, one supporting x4 operation + - One serial ATA (SATA 3.0) controllers + - Additional peripheral interfaces + - Three high-speed USB 3.0 controllers with integrated PHY + - Enhanced secure digital host controller (eSDXC/eMMC) + - Quad Serial Peripheral Interface (QSPI) Controller + - Serial peripheral interface (SPI) controller + - Four I2C controllers + - Two DUARTs + - Integrated flash controller supporting NAND and NOR flash + - QorIQ platform's trust architecture 2.1 + + LS1043AQDS board Overview + ----------------------- + - SERDES Connections, 4 lanes supporting: + - PCI Express - 3.0 + - SGMII, SGMII 2.5 + - QSGMII + - SATA 3.0 + - XFI + - DDR Controller + - 2GB 40bits (8-bits ECC) DDR4 SDRAM. Support rates of up to 1600MT/s + -IFC/Local Bus + - One in-socket 128 MB NOR flash 16-bit data bus + - One 512 MB NAND flash with ECC support + - PromJet Port + - FPGA connection + - USB 3.0 + - Three high speed USB 3.0 ports + - First USB 3.0 port configured as Host with Type-A connector + - The other two USB 3.0 ports configured as OTG with micro-AB connector + - SDHC port connects directly to an adapter card slot, featuring: + - Optional clock feedback paths, and optional high-speed voltage translation assistance + - SD slots for SD, SDHC (1x, 4x, 8x), and/or MMC + - eMMC memory devices + - DSPI: Onboard support for three SPI flash memory devices + - 4 I2C controllers + - One SATA onboard connectors + - UART + - Two 4-pin serial ports at up to 115.2 Kbit/s + - Two DB9 D-Type connectors supporting one Serial port each + - ARM JTAG support + +Memory map from core's view +---------------------------- +Start Address End Address Description Size +0x00_0000_0000 0x00_000F_FFFF Secure Boot ROM 1MB +0x00_0100_0000 0x00_0FFF_FFFF CCSRBAR 240MB +0x00_1000_0000 0x00_1000_FFFF OCRAM0 64KB +0x00_1001_0000 0x00_1001_FFFF OCRAM1 64KB +0x00_2000_0000 0x00_20FF_FFFF DCSR 16MB +0x00_6000_0000 0x00_67FF_FFFF IFC - NOR Flash 128MB +0x00_7E80_0000 0x00_7E80_FFFF IFC - NAND Flash 64KB +0x00_7FB0_0000 0x00_7FB0_0FFF IFC - FPGA 4KB +0x00_8000_0000 0x00_FFFF_FFFF DRAM1 2GB + +Booting Options +--------------- +a) Promjet Boot +b) NOR boot +c) NAND boot +d) SD boot diff --git a/board/freescale/ls1043aqds/ddr.c b/board/freescale/ls1043aqds/ddr.c new file mode 100644 index 0000000..42d9068 --- /dev/null +++ b/board/freescale/ls1043aqds/ddr.c @@ -0,0 +1,140 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> +#ifdef CONFIG_FSL_DEEP_SLEEP +#include <fsl_sleep.h> +#endif +#include "ddr.h" + +DECLARE_GLOBAL_DATA_PTR; + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; + ulong ddr_freq; + + if (ctrl_num > 3) { + printf("Not supported controller number %d\n", ctrl_num); + return; + } + if (!pdimm->n_ranks) + return; + + pbsp = udimms[0]; + + /* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = get_ddr_freq(0) / 1000000; + while (pbsp->datarate_mhz_high) { + if (pbsp->n_ranks == pdimm->n_ranks) { + if (ddr_freq <= pbsp->datarate_mhz_high) { + popts->clk_adjust = pbsp->clk_adjust; + popts->wrlvl_start = pbsp->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + popts->cpo_override = pbsp->cpo_override; + popts->write_data_delay = + pbsp->write_data_delay; + goto found; + } + pbsp_highest = pbsp; + } + pbsp++; + } + + if (pbsp_highest) { + printf("Error: board specific timing not found for %lu MT/s\n", + ddr_freq); + printf("Trying to use the highest speed (%u) parameters\n", + pbsp_highest->datarate_mhz_high); + popts->clk_adjust = pbsp_highest->clk_adjust; + popts->wrlvl_start = pbsp_highest->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + } else { + panic("DIMM is not supported by this board"); + } +found: + debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n", + pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb); + + /* force DDR bus width to 32 bits */ + popts->data_bus_width = 1; + popts->otf_burst_chop_en = 0; + popts->burst_length = DDR_BL8; + popts->bstopre = 0; /* enable auto precharge */ + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 1; + /* + * Write leveling override + */ + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + + /* + * Rtt and Rtt_WR override + */ + popts->rtt_override = 0; + + /* Enable ZQ calibration */ + popts->zq_en = 1; + +#ifdef CONFIG_SYS_FSL_DDR4 + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_80ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_80ohm) | + DDR_CDR2_VREF_OVRD(70); /* Vref = 70% */ +#else + popts->cswl_override = DDR_CSWL_CS0; + + /* DHC_EN =1, ODT = 75 Ohm */ + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm); +#endif +} + +phys_size_t initdram(int board_type) +{ + phys_size_t dram_size; + +#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD) + return fsl_ddr_sdram_size(); +#else + puts("Initializing DDR....using SPD\n"); + + dram_size = fsl_ddr_sdram(); +#endif + +#ifdef CONFIG_FSL_DEEP_SLEEP + fsl_dp_ddr_restore(); +#endif + + return dram_size; +} + +void dram_init_banksize(void) +{ + /* + * gd->secure_ram tracks the location of secure memory. + * It was set as if the memory starts from 0. + * The address needs to add the offset of its bank. + */ + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; + gd->bd->bi_dram[0].size = gd->ram_size; +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; +#endif +} diff --git a/board/freescale/ls1043aqds/ddr.h b/board/freescale/ls1043aqds/ddr.h new file mode 100644 index 0000000..8adb660 --- /dev/null +++ b/board/freescale/ls1043aqds/ddr.h @@ -0,0 +1,60 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __DDR_H__ +#define __DDR_H__ + +struct board_specific_parameters { + u32 n_ranks; + u32 datarate_mhz_high; + u32 rank_gb; + u32 clk_adjust; + u32 wrlvl_start; + u32 wrlvl_ctl_2; + u32 wrlvl_ctl_3; + u32 cpo_override; + u32 write_data_delay; + u32 force_2t; +}; + +/* + * These tables contain all valid speeds we want to override with board + * specific parameters. datarate_mhz_high values need to be in ascending order + * for each n_ranks group. + */ +static const struct board_specific_parameters udimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | + */ +#ifdef CONFIG_SYS_FSL_DDR4 + {2, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A,}, + {2, 1900, 0, 4, 6, 0x08080A0C, 0x0D0E0F0A,}, + {1, 1666, 0, 4, 6, 0x0708090B, 0x0C0D0E0A,}, + {1, 1900, 0, 4, 9, 0x0A0B0C0B, 0x0D0E0F0D,}, + {1, 2200, 0, 4, 10, 0x0B0C0D0C, 0x0E0F110E,}, +#elif defined(CONFIG_SYS_FSL_DDR3) + {1, 833, 1, 6, 8, 0x06060607, 0x08080807, 0x1f, 2, 0}, + {1, 1350, 1, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0}, + {1, 833, 2, 6, 8, 0x06060607, 0x08080807, 0x1f, 2, 0}, + {1, 1350, 2, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0}, + {2, 833, 4, 6, 8, 0x06060607, 0x08080807, 0x1f, 2, 0}, + {2, 1350, 4, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0}, + {2, 1350, 0, 6, 8, 0x0708080A, 0x0A0B0C09, 0x1f, 2, 0}, + {2, 1666, 4, 4, 0xa, 0x0B08090C, 0x0B0E0D0A, 0x1f, 2, 0}, + {2, 1666, 0, 4, 0xa, 0x0B08090C, 0x0B0E0D0A, 0x1f, 2, 0}, +#else +#error DDR type not defined +#endif + {} +}; + +static const struct board_specific_parameters *udimms[] = { + udimm0, +}; + +#endif diff --git a/board/freescale/ls1043aqds/eth.c b/board/freescale/ls1043aqds/eth.c new file mode 100644 index 0000000..b7fc360 --- /dev/null +++ b/board/freescale/ls1043aqds/eth.c @@ -0,0 +1,492 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <netdev.h> +#include <fm_eth.h> +#include <fsl_mdio.h> +#include <fsl_dtsec.h> +#include <malloc.h> +#include <asm/arch/fsl_serdes.h> + +#include "../common/qixis.h" +#include "../common/fman.h" +#include "ls1043aqds_qixis.h" + +#define EMI_NONE 0xFF +#define EMI1_RGMII1 0 +#define EMI1_RGMII2 1 +#define EMI1_SLOT1 2 +#define EMI1_SLOT2 3 +#define EMI1_SLOT3 4 +#define EMI1_SLOT4 5 +#define EMI2 6 + +static int mdio_mux[NUM_FM_PORTS]; + +static const char * const mdio_names[] = { + "LS1043AQDS_MDIO_RGMII1", + "LS1043AQDS_MDIO_RGMII2", + "LS1043AQDS_MDIO_SLOT1", + "LS1043AQDS_MDIO_SLOT2", + "LS1043AQDS_MDIO_SLOT3", + "LS1043AQDS_MDIO_SLOT4", + "NULL", +}; + +/* Map SerDes1 4 lanes to default slot, will be initialized dynamically */ +static u8 lane_to_slot[] = {1, 2, 3, 4}; + +static const char *ls1043aqds_mdio_name_for_muxval(u8 muxval) +{ + return mdio_names[muxval]; +} + +struct mii_dev *mii_dev_for_muxval(u8 muxval) +{ + struct mii_dev *bus; + const char *name; + + if (muxval > EMI2) + return NULL; + + name = ls1043aqds_mdio_name_for_muxval(muxval); + + if (!name) { + printf("No bus for muxval %x\n", muxval); + return NULL; + } + + bus = miiphy_get_dev_by_name(name); + + if (!bus) { + printf("No bus by name %s\n", name); + return NULL; + } + + return bus; +} + +struct ls1043aqds_mdio { + u8 muxval; + struct mii_dev *realbus; +}; + +static void ls1043aqds_mux_mdio(u8 muxval) +{ + u8 brdcfg4; + + if (muxval < 7) { + brdcfg4 = QIXIS_READ(brdcfg[4]); + brdcfg4 &= ~BRDCFG4_EMISEL_MASK; + brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT); + QIXIS_WRITE(brdcfg[4], brdcfg4); + } +} + +static int ls1043aqds_mdio_read(struct mii_dev *bus, int addr, int devad, + int regnum) +{ + struct ls1043aqds_mdio *priv = bus->priv; + + ls1043aqds_mux_mdio(priv->muxval); + + return priv->realbus->read(priv->realbus, addr, devad, regnum); +} + +static int ls1043aqds_mdio_write(struct mii_dev *bus, int addr, int devad, + int regnum, u16 value) +{ + struct ls1043aqds_mdio *priv = bus->priv; + + ls1043aqds_mux_mdio(priv->muxval); + + return priv->realbus->write(priv->realbus, addr, devad, + regnum, value); +} + +static int ls1043aqds_mdio_reset(struct mii_dev *bus) +{ + struct ls1043aqds_mdio *priv = bus->priv; + + return priv->realbus->reset(priv->realbus); +} + +static int ls1043aqds_mdio_init(char *realbusname, u8 muxval) +{ + struct ls1043aqds_mdio *pmdio; + struct mii_dev *bus = mdio_alloc(); + + if (!bus) { + printf("Failed to allocate ls1043aqds MDIO bus\n"); + return -1; + } + + pmdio = malloc(sizeof(*pmdio)); + if (!pmdio) { + printf("Failed to allocate ls1043aqds private data\n"); + free(bus); + return -1; + } + + bus->read = ls1043aqds_mdio_read; + bus->write = ls1043aqds_mdio_write; + bus->reset = ls1043aqds_mdio_reset; + sprintf(bus->name, ls1043aqds_mdio_name_for_muxval(muxval)); + + pmdio->realbus = miiphy_get_dev_by_name(realbusname); + + if (!pmdio->realbus) { + printf("No bus with name %s\n", realbusname); + free(bus); + free(pmdio); + return -1; + } + + pmdio->muxval = muxval; + bus->priv = pmdio; + return mdio_register(bus); +} + +void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, + enum fm_port port, int offset) +{ + struct fixed_link f_link; + + if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) { + if (port == FM1_DTSEC9) { + fdt_set_phy_handle(fdt, compat, addr, + "sgmii_riser_s1_p1"); + } else if (port == FM1_DTSEC2) { + fdt_set_phy_handle(fdt, compat, addr, + "sgmii_riser_s2_p1"); + } else if (port == FM1_DTSEC5) { + fdt_set_phy_handle(fdt, compat, addr, + "sgmii_riser_s3_p1"); + } else if (port == FM1_DTSEC6) { + fdt_set_phy_handle(fdt, compat, addr, + "sgmii_riser_s4_p1"); + } + } else if (fm_info_get_enet_if(port) == + PHY_INTERFACE_MODE_SGMII_2500) { + /* 2.5G SGMII interface */ + f_link.phy_id = port; + f_link.duplex = 1; + f_link.link_speed = 1000; + f_link.pause = 0; + f_link.asym_pause = 0; + /* no PHY for 2.5G SGMII */ + fdt_delprop(fdt, offset, "phy-handle"); + fdt_setprop(fdt, offset, "fixed-link", &f_link, sizeof(f_link)); + fdt_setprop_string(fdt, offset, "phy-connection-type", + "sgmii-2500"); + } else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_QSGMII) { + switch (mdio_mux[port]) { + case EMI1_SLOT1: + switch (port) { + case FM1_DTSEC1: + fdt_set_phy_handle(fdt, compat, addr, + "qsgmii_s1_p1"); + break; + case FM1_DTSEC2: + fdt_set_phy_handle(fdt, compat, addr, + "qsgmii_s1_p2"); + break; + case FM1_DTSEC5: + fdt_set_phy_handle(fdt, compat, addr, + "qsgmii_s1_p3"); + break; + case FM1_DTSEC6: + fdt_set_phy_handle(fdt, compat, addr, + "qsgmii_s1_p4"); + break; + default: + break; + } + break; + case EMI1_SLOT2: + switch (port) { + case FM1_DTSEC1: + fdt_set_phy_handle(fdt, compat, addr, + "qsgmii_s2_p1"); + break; + case FM1_DTSEC2: + fdt_set_phy_handle(fdt, compat, addr, + "qsgmii_s2_p2"); + break; + case FM1_DTSEC5: + fdt_set_phy_handle(fdt, compat, addr, + "qsgmii_s2_p3"); + break; + case FM1_DTSEC6: + fdt_set_phy_handle(fdt, compat, addr, + "qsgmii_s2_p4"); + break; + default: + break; + } + break; + default: + break; + } + fdt_delprop(fdt, offset, "phy-connection-type"); + fdt_setprop_string(fdt, offset, "phy-connection-type", + "qsgmii"); + } else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_XGMII && + port == FM1_10GEC1) { + /* XFI interface */ + f_link.phy_id = port; + f_link.duplex = 1; + f_link.link_speed = 10000; + f_link.pause = 0; + f_link.asym_pause = 0; + /* no PHY for XFI */ + fdt_delprop(fdt, offset, "phy-handle"); + fdt_setprop(fdt, offset, "fixed-link", &f_link, sizeof(f_link)); + fdt_setprop_string(fdt, offset, "phy-connection-type", "xgmii"); + } +} + +void fdt_fixup_board_enet(void *fdt) +{ + int i; + struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + u32 srds_s1; + + srds_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK; + srds_s1 >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT; + + for (i = FM1_DTSEC1; i < NUM_FM_PORTS; i++) { + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_QSGMII: + switch (mdio_mux[i]) { + case EMI1_SLOT1: + fdt_status_okay_by_alias(fdt, "emi1_slot1"); + break; + case EMI1_SLOT2: + fdt_status_okay_by_alias(fdt, "emi1_slot2"); + break; + case EMI1_SLOT3: + fdt_status_okay_by_alias(fdt, "emi1_slot3"); + break; + case EMI1_SLOT4: + fdt_status_okay_by_alias(fdt, "emi1_slot4"); + break; + default: + break; + } + break; + case PHY_INTERFACE_MODE_XGMII: + break; + default: + break; + } + } +} + +int board_eth_init(bd_t *bis) +{ +#ifdef CONFIG_FMAN_ENET + int i, idx, lane, slot, interface; + struct memac_mdio_info dtsec_mdio_info; + struct memac_mdio_info tgec_mdio_info; + struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + u32 srds_s1; + + srds_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK; + srds_s1 >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT; + + /* Initialize the mdio_mux array so we can recognize empty elements */ + for (i = 0; i < NUM_FM_PORTS; i++) + mdio_mux[i] = EMI_NONE; + + dtsec_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR; + + dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; + + /* Register the 1G MDIO bus */ + fm_memac_mdio_init(bis, &dtsec_mdio_info); + + tgec_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR; + tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME; + + /* Register the 10G MDIO bus */ + fm_memac_mdio_init(bis, &tgec_mdio_info); + + /* Register the muxing front-ends to the MDIO buses */ + ls1043aqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1); + ls1043aqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII2); + ls1043aqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1); + ls1043aqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2); + ls1043aqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3); + ls1043aqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4); + ls1043aqds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2); + + /* Set the two on-board RGMII PHY address */ + fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY1_ADDR); + fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY2_ADDR); + + switch (srds_s1) { + case 0x2555: + /* 2.5G SGMII on lane A, MAC 9 */ + fm_info_set_phy_address(FM1_DTSEC9, 9); + break; + case 0x4555: + case 0x4558: + /* QSGMII on lane A, MAC 1/2/5/6 */ + fm_info_set_phy_address(FM1_DTSEC1, + QSGMII_CARD_PORT1_PHY_ADDR_S1); + fm_info_set_phy_address(FM1_DTSEC2, + QSGMII_CARD_PORT2_PHY_ADDR_S1); + fm_info_set_phy_address(FM1_DTSEC5, + QSGMII_CARD_PORT3_PHY_ADDR_S1); + fm_info_set_phy_address(FM1_DTSEC6, + QSGMII_CARD_PORT4_PHY_ADDR_S1); + break; + case 0x1355: + /* SGMII on lane B, MAC 2*/ + fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT1_PHY_ADDR); + break; + case 0x2355: + /* 2.5G SGMII on lane A, MAC 9 */ + fm_info_set_phy_address(FM1_DTSEC9, 9); + /* SGMII on lane B, MAC 2*/ + fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT1_PHY_ADDR); + break; + case 0x3335: + /* SGMII on lane C, MAC 5 */ + fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR); + case 0x3355: + case 0x3358: + /* SGMII on lane B, MAC 2 */ + fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT1_PHY_ADDR); + case 0x3555: + case 0x3558: + /* SGMII on lane A, MAC 9 */ + fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR); + break; + case 0x1455: + /* QSGMII on lane B, MAC 1/2/5/6 */ + fm_info_set_phy_address(FM1_DTSEC1, + QSGMII_CARD_PORT1_PHY_ADDR_S2); + fm_info_set_phy_address(FM1_DTSEC2, + QSGMII_CARD_PORT2_PHY_ADDR_S2); + fm_info_set_phy_address(FM1_DTSEC5, + QSGMII_CARD_PORT3_PHY_ADDR_S2); + fm_info_set_phy_address(FM1_DTSEC6, + QSGMII_CARD_PORT4_PHY_ADDR_S2); + break; + case 0x2455: + /* 2.5G SGMII on lane A, MAC 9 */ + fm_info_set_phy_address(FM1_DTSEC9, 9); + /* QSGMII on lane B, MAC 1/2/5/6 */ + fm_info_set_phy_address(FM1_DTSEC1, + QSGMII_CARD_PORT1_PHY_ADDR_S2); + fm_info_set_phy_address(FM1_DTSEC2, + QSGMII_CARD_PORT2_PHY_ADDR_S2); + fm_info_set_phy_address(FM1_DTSEC5, + QSGMII_CARD_PORT3_PHY_ADDR_S2); + fm_info_set_phy_address(FM1_DTSEC6, + QSGMII_CARD_PORT4_PHY_ADDR_S2); + break; + case 0x2255: + /* 2.5G SGMII on lane A, MAC 9 */ + fm_info_set_phy_address(FM1_DTSEC9, 9); + /* 2.5G SGMII on lane B, MAC 2 */ + fm_info_set_phy_address(FM1_DTSEC2, 2); + break; + case 0x3333: + /* SGMII on lane A/B/C/D, MAC 9/2/5/6 */ + fm_info_set_phy_address(FM1_DTSEC9, + SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, + SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC5, + SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, + SGMII_CARD_PORT1_PHY_ADDR); + break; + default: + printf("Invalid SerDes protocol 0x%x for LS1043AQDS\n", + srds_s1); + break; + } + + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { + idx = i - FM1_DTSEC1; + interface = fm_info_get_enet_if(i); + switch (interface) { + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_SGMII_2500: + case PHY_INTERFACE_MODE_QSGMII: + if (interface == PHY_INTERFACE_MODE_SGMII) { + lane = serdes_get_first_lane(FSL_SRDS_1, + SGMII_FM1_DTSEC1 + idx); + } else if (interface == PHY_INTERFACE_MODE_SGMII_2500) { + lane = serdes_get_first_lane(FSL_SRDS_1, + SGMII_2500_FM1_DTSEC1 + idx); + } else { + lane = serdes_get_first_lane(FSL_SRDS_1, + QSGMII_FM1_A); + } + + if (lane < 0) + break; + + slot = lane_to_slot[lane]; + debug("FM1@DTSEC%u expects SGMII in slot %u\n", + idx + 1, slot); + if (QIXIS_READ(present2) & (1 << (slot - 1))) + fm_disable_port(i); + + switch (slot) { + case 1: + mdio_mux[i] = EMI1_SLOT1; + fm_info_set_mdio(i, mii_dev_for_muxval( + mdio_mux[i])); + break; + case 2: + mdio_mux[i] = EMI1_SLOT2; + fm_info_set_mdio(i, mii_dev_for_muxval( + mdio_mux[i])); + break; + case 3: + mdio_mux[i] = EMI1_SLOT3; + fm_info_set_mdio(i, mii_dev_for_muxval( + mdio_mux[i])); + break; + case 4: + mdio_mux[i] = EMI1_SLOT4; + fm_info_set_mdio(i, mii_dev_for_muxval( + mdio_mux[i])); + break; + default: + break; + } + break; + case PHY_INTERFACE_MODE_RGMII: + if (i == FM1_DTSEC3) + mdio_mux[i] = EMI1_RGMII1; + else if (i == FM1_DTSEC4) + mdio_mux[i] = EMI1_RGMII2; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + default: + break; + } + } + + cpu_eth_init(bis); +#endif /* CONFIG_FMAN_ENET */ + + return pci_eth_init(bis); +} diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c new file mode 100644 index 0000000..d6696ca --- /dev/null +++ b/board/freescale/ls1043aqds/ls1043aqds.c @@ -0,0 +1,333 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <i2c.h> +#include <fdt_support.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/fsl_serdes.h> +#include <asm/arch/fdt.h> +#include <asm/arch/soc.h> +#include <ahci.h> +#include <hwconfig.h> +#include <mmc.h> +#include <scsi.h> +#include <fm_eth.h> +#include <fsl_csu.h> +#include <fsl_esdhc.h> +#include <fsl_ifc.h> +#include <spl.h> + +#include "../common/qixis.h" +#include "ls1043aqds_qixis.h" + +DECLARE_GLOBAL_DATA_PTR; + +enum { + MUX_TYPE_GPIO, +}; + +/* LS1043AQDS serdes mux */ +#define CFG_SD_MUX1_SLOT2 0x0 /* SLOT2 TX/RX0 */ +#define CFG_SD_MUX1_SLOT1 0x1 /* SLOT1 TX/RX1 */ +#define CFG_SD_MUX2_SLOT3 0x0 /* SLOT3 TX/RX0 */ +#define CFG_SD_MUX2_SLOT1 0x1 /* SLOT1 TX/RX2 */ +#define CFG_SD_MUX3_SLOT4 0x0 /* SLOT4 TX/RX0 */ +#define CFG_SD_MUX3_MUX4 0x1 /* MUX4 */ +#define CFG_SD_MUX4_SLOT3 0x0 /* SLOT3 TX/RX1 */ +#define CFG_SD_MUX4_SLOT1 0x1 /* SLOT1 TX/RX3 */ + +int checkboard(void) +{ + char buf[64]; +#ifndef CONFIG_SD_BOOT + u8 sw; +#endif + + puts("Board: LS1043AQDS, boot from "); + +#ifdef CONFIG_SD_BOOT + puts("SD\n"); +#else + sw = QIXIS_READ(brdcfg[0]); + sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; + + if (sw < 0x8) + printf("vBank: %d\n", sw); + else if (sw == 0x8) + puts("PromJet\n"); + else if (sw == 0x9) + puts("NAND\n"); + else if (sw == 0x15) + printf("IFCCard\n"); + else + printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); +#endif + + printf("Sys ID: 0x%02x, Sys Ver: 0x%02x\n", + QIXIS_READ(id), QIXIS_READ(arch)); + + printf("FPGA: v%d (%s), build %d\n", + (int)QIXIS_READ(scver), qixis_read_tag(buf), + (int)qixis_read_minor()); + + return 0; +} + +bool if_board_diff_clk(void) +{ + u8 diff_conf = QIXIS_READ(brdcfg[11]); + + return diff_conf & 0x40; +} + +unsigned long get_board_sys_clk(void) +{ + u8 sysclk_conf = QIXIS_READ(brdcfg[1]); + + switch (sysclk_conf & 0x0f) { + case QIXIS_SYSCLK_64: + return 64000000; + case QIXIS_SYSCLK_83: + return 83333333; + case QIXIS_SYSCLK_100: + return 100000000; + case QIXIS_SYSCLK_125: + return 125000000; + case QIXIS_SYSCLK_133: + return 133333333; + case QIXIS_SYSCLK_150: + return 150000000; + case QIXIS_SYSCLK_160: + return 160000000; + case QIXIS_SYSCLK_166: + return 166666666; + } + + return 66666666; +} + +unsigned long get_board_ddr_clk(void) +{ + u8 ddrclk_conf = QIXIS_READ(brdcfg[1]); + + if (if_board_diff_clk()) + return get_board_sys_clk(); + switch ((ddrclk_conf & 0x30) >> 4) { + case QIXIS_DDRCLK_100: + return 100000000; + case QIXIS_DDRCLK_125: + return 125000000; + case QIXIS_DDRCLK_133: + return 133333333; + } + + return 66666666; +} + +int select_i2c_ch_pca9547(u8 ch) +{ + int ret; + + ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); + if (ret) { + puts("PCA: failed to select proper channel\n"); + return ret; + } + + return 0; +} + +int dram_init(void) +{ + /* + * When resuming from deep sleep, the I2C channel may not be + * in the default channel. So, switch to the default channel + * before accessing DDR SPD. + */ + select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); + gd->ram_size = initdram(0); + + return 0; +} + +int i2c_multiplexer_select_vid_channel(u8 channel) +{ + return select_i2c_ch_pca9547(channel); +} + +void board_retimer_init(void) +{ + u8 reg; + + /* Retimer is connected to I2C1_CH7_CH5 */ + reg = I2C_MUX_CH7; + i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, ®, 1); + reg = I2C_MUX_CH5; + i2c_write(I2C_MUX_PCA_ADDR_SEC, 0, 1, ®, 1); + + /* Access to Control/Shared register */ + reg = 0x0; + i2c_write(I2C_RETIMER_ADDR, 0xff, 1, ®, 1); + + /* Read device revision and ID */ + i2c_read(I2C_RETIMER_ADDR, 1, 1, ®, 1); + debug("Retimer version id = 0x%x\n", reg); + + /* Enable Broadcast. All writes target all channel register sets */ + reg = 0x0c; + i2c_write(I2C_RETIMER_ADDR, 0xff, 1, ®, 1); + + /* Reset Channel Registers */ + i2c_read(I2C_RETIMER_ADDR, 0, 1, ®, 1); + reg |= 0x4; + i2c_write(I2C_RETIMER_ADDR, 0, 1, ®, 1); + + /* Enable override divider select and Enable Override Output Mux */ + i2c_read(I2C_RETIMER_ADDR, 9, 1, ®, 1); + reg |= 0x24; + i2c_write(I2C_RETIMER_ADDR, 9, 1, ®, 1); + + /* Select VCO Divider to full rate (000) */ + i2c_read(I2C_RETIMER_ADDR, 0x18, 1, ®, 1); + reg &= 0x8f; + i2c_write(I2C_RETIMER_ADDR, 0x18, 1, ®, 1); + + /* Selects active PFD MUX Input as Re-timed Data (001) */ + i2c_read(I2C_RETIMER_ADDR, 0x1e, 1, ®, 1); + reg &= 0x3f; + reg |= 0x20; + i2c_write(I2C_RETIMER_ADDR, 0x1e, 1, ®, 1); + + /* Set data rate as 10.3125 Gbps */ + reg = 0x0; + i2c_write(I2C_RETIMER_ADDR, 0x60, 1, ®, 1); + reg = 0xb2; + i2c_write(I2C_RETIMER_ADDR, 0x61, 1, ®, 1); + reg = 0x90; + i2c_write(I2C_RETIMER_ADDR, 0x62, 1, ®, 1); + reg = 0xb3; + i2c_write(I2C_RETIMER_ADDR, 0x63, 1, ®, 1); + reg = 0xcd; + i2c_write(I2C_RETIMER_ADDR, 0x64, 1, ®, 1); +} + +int board_early_init_f(void) +{ + fsl_lsch2_early_init_f(); + + return 0; +} + +#ifdef CONFIG_FSL_DEEP_SLEEP +/* determine if it is a warm boot */ +bool is_warm_boot(void) +{ +#define DCFG_CCSR_CRSTSR_WDRFR (1 << 3) + struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; + + if (in_be32(&gur->crstsr) & DCFG_CCSR_CRSTSR_WDRFR) + return 1; + + return 0; +} +#endif + +int config_board_mux(int ctrl_type) +{ + u8 reg14; + + reg14 = QIXIS_READ(brdcfg[14]); + + switch (ctrl_type) { + case MUX_TYPE_GPIO: + reg14 = (reg14 & (~0x30)) | 0x20; + break; + default: + puts("Unsupported mux interface type\n"); + return -1; + } + + QIXIS_WRITE(brdcfg[14], reg14); + + return 0; +} + +int config_serdes_mux(void) +{ + return 0; +} + + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ + if (hwconfig("gpio")) + config_board_mux(MUX_TYPE_GPIO); + + return 0; +} +#endif + +int board_init(void) +{ + struct ccsr_cci400 *cci = (struct ccsr_cci400 *) + CONFIG_SYS_CCI400_ADDR; + + /* Set CCI-400 control override register to enable barrier + * transaction */ + out_le32(&cci->ctrl_ord, + CCI400_CTRLORD_EN_BARRIER); + + select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); + board_retimer_init(); + +#ifdef CONFIG_SYS_FSL_SERDES + config_serdes_mux(); +#endif + +#ifdef CONFIG_LAYERSCAPE_NS_ACCESS + enable_layerscape_ns_access(); +#endif + +#ifdef CONFIG_ENV_IS_NOWHERE + gd->env_addr = (ulong)&default_environment[0]; +#endif + return 0; +} + +#ifdef CONFIG_OF_BOARD_SETUP +int ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); + +#ifdef CONFIG_SYS_DPAA_FMAN + fdt_fixup_fman_ethernet(blob); + fdt_fixup_board_enet(blob); +#endif + return 0; +} +#endif + +u8 flash_read8(void *addr) +{ + return __raw_readb(addr + 1); +} + +void flash_write16(u16 val, void *addr) +{ + u16 shftval = (((val >> 8) & 0xff) | ((val << 8) & 0xff00)); + + __raw_writew(shftval, addr); +} + +u16 flash_read16(void *addr) +{ + u16 val = __raw_readw(addr); + + return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00); +} diff --git a/board/freescale/ls1043aqds/ls1043aqds_pbi.cfg b/board/freescale/ls1043aqds/ls1043aqds_pbi.cfg new file mode 100644 index 0000000..f072274 --- /dev/null +++ b/board/freescale/ls1043aqds/ls1043aqds_pbi.cfg @@ -0,0 +1,14 @@ +#Configure Scratch register +09570600 00000000 +09570604 10000000 +#Alt base register +09570158 00001000 +#Disable CCI barrier tranaction +09570178 0000e010 +09180000 00000008 +#USB PHY frequency sel +09570418 0000009e +0957041c 0000009e +09570420 0000009e +#flush PBI data +096100c0 000fffff diff --git a/board/freescale/ls1043aqds/ls1043aqds_qixis.h b/board/freescale/ls1043aqds/ls1043aqds_qixis.h new file mode 100644 index 0000000..8783be8 --- /dev/null +++ b/board/freescale/ls1043aqds/ls1043aqds_qixis.h @@ -0,0 +1,39 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LS1043AQDS_QIXIS_H__ +#define __LS1043AQDS_QIXIS_H__ + +/* Definitions of QIXIS Registers for LS1043AQDS */ + +/* BRDCFG4[4:7] select EC1 and EC2 as a pair */ +#define BRDCFG4_EMISEL_MASK 0xe0 +#define BRDCFG4_EMISEL_SHIFT 5 + +/* SYSCLK */ +#define QIXIS_SYSCLK_66 0x0 +#define QIXIS_SYSCLK_83 0x1 +#define QIXIS_SYSCLK_100 0x2 +#define QIXIS_SYSCLK_125 0x3 +#define QIXIS_SYSCLK_133 0x4 +#define QIXIS_SYSCLK_150 0x5 +#define QIXIS_SYSCLK_160 0x6 +#define QIXIS_SYSCLK_166 0x7 +#define QIXIS_SYSCLK_64 0x8 + +/* DDRCLK */ +#define QIXIS_DDRCLK_66 0x0 +#define QIXIS_DDRCLK_100 0x1 +#define QIXIS_DDRCLK_125 0x2 +#define QIXIS_DDRCLK_133 0x3 + +/* BRDCFG2 - SD clock*/ +#define QIXIS_SDCLK1_100 0x0 +#define QIXIS_SDCLK1_125 0x1 +#define QIXIS_SDCLK1_165 0x2 +#define QIXIS_SDCLK1_100_SP 0x3 + +#endif diff --git a/board/freescale/ls1043aqds/ls1043aqds_rcw_nand.cfg b/board/freescale/ls1043aqds/ls1043aqds_rcw_nand.cfg new file mode 100644 index 0000000..d87058b --- /dev/null +++ b/board/freescale/ls1043aqds/ls1043aqds_rcw_nand.cfg @@ -0,0 +1,7 @@ +#PBL preamble and RCW header +aa55aa55 01ee0100 +# serdes protocol +08100010 0a000000 00000000 00000000 +14550002 80004012 e0106000 c1002000 +00000000 00000000 00000000 00038800 +00000000 00001100 00000096 00000001 diff --git a/board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg b/board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg new file mode 100644 index 0000000..b6b5e0b --- /dev/null +++ b/board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg @@ -0,0 +1,8 @@ +#PBL preamble and RCW header +aa55aa55 01ee0100 +# RCW +# Enable IFC; disable QSPI +08100010 0a000000 00000000 00000000 +14550002 80004012 60040000 c1002000 +00000000 00000000 00000000 00038800 +00000000 00001100 00000096 00000001 diff --git a/board/freescale/ls1043ardb/MAINTAINERS b/board/freescale/ls1043ardb/MAINTAINERS index efca5bf..84ffb63 100644 --- a/board/freescale/ls1043ardb/MAINTAINERS +++ b/board/freescale/ls1043ardb/MAINTAINERS @@ -7,3 +7,8 @@ F: include/configs/ls1043ardb.h F: configs/ls1043ardb_defconfig F: configs/ls1043ardb_nand_defconfig F: configs/ls1043ardb_sdcard_defconfig + +LS1043A_SECURE_BOOT BOARD +M: Aneesh Bansal <aneesh.bansal@freescale.com> +S: Maintained +F: configs/ls1043ardb_SECURE_BOOT_defconfig diff --git a/board/freescale/ls1043ardb/ddr.c b/board/freescale/ls1043ardb/ddr.c index b181579..11bc0f2 100644 --- a/board/freescale/ls1043ardb/ddr.c +++ b/board/freescale/ls1043ardb/ddr.c @@ -186,6 +186,28 @@ phys_size_t initdram(int board_type) void dram_init_banksize(void) { + /* + * gd->secure_ram tracks the location of secure memory. + * It was set as if the memory starts from 0. + * The address needs to add the offset of its bank. + */ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; - gd->bd->bi_dram[0].size = gd->ram_size; + if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) { + gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE; + gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE; + gd->bd->bi_dram[1].size = gd->ram_size - + CONFIG_SYS_DDR_BLOCK1_SIZE; +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + gd->secure_ram = gd->bd->bi_dram[1].start + + gd->secure_ram - + CONFIG_SYS_DDR_BLOCK1_SIZE; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; +#endif + } else { + gd->bd->bi_dram[0].size = gd->ram_size; +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; +#endif + } } diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c index 9032ed3..c8f723a 100644 --- a/board/freescale/ls1043ardb/ls1043ardb.c +++ b/board/freescale/ls1043ardb/ls1043ardb.c @@ -18,6 +18,8 @@ #include <fsl_csu.h> #include <fsl_esdhc.h> #include <fsl_ifc.h> +#include <environment.h> +#include <fsl_sec.h> #include "cpld.h" DECLARE_GLOBAL_DATA_PTR; @@ -69,7 +71,23 @@ int dram_init(void) int board_early_init_f(void) { + struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; + u32 usb_pwrfault; + fsl_lsch2_early_init_f(); + +#ifdef CONFIG_HAS_FSL_XHCI_USB + out_be32(&scfg->rcwpmuxcr0, 0x3333); + out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1); + usb_pwrfault = (SCFG_USBPWRFAULT_DEDICATED << + SCFG_USBPWRFAULT_USB3_SHIFT) | + (SCFG_USBPWRFAULT_DEDICATED << + SCFG_USBPWRFAULT_USB2_SHIFT) | + (SCFG_USBPWRFAULT_SHARED << + SCFG_USBPWRFAULT_USB1_SHIFT); + out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault); +#endif + return 0; } @@ -107,13 +125,37 @@ int config_board_mux(void) int misc_init_r(void) { config_board_mux(); - +#ifdef CONFIG_SECURE_BOOT + /* In case of Secure Boot, the IBR configures the SMMU + * to allow only Secure transactions. + * SMMU must be reset in bypass mode. + * Set the ClientPD bit and Clear the USFCFG Bit + */ + u32 val; + val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK); + out_le32(SMMU_SCR0, val); + val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK); + out_le32(SMMU_NSCR0, val); +#endif +#ifdef CONFIG_FSL_CAAM + return sec_init(); +#endif return 0; } #endif int ft_board_setup(void *blob, bd_t *bd) { + u64 base[CONFIG_NR_DRAM_BANKS]; + u64 size[CONFIG_NR_DRAM_BANKS]; + + /* fixup DT for the two DDR banks */ + base[0] = gd->bd->bi_dram[0].start; + size[0] = gd->bd->bi_dram[0].size; + base[1] = gd->bd->bi_dram[1].start; + size[1] = gd->bd->bi_dram[1].size; + + fdt_fixup_memory_banks(blob, base, size, 2); ft_cpu_setup(blob, bd); #ifdef CONFIG_SYS_DPAA_FMAN diff --git a/board/freescale/ls1043ardb/ls1043ardb_rcw_nand.cfg b/board/freescale/ls1043ardb/ls1043ardb_rcw_nand.cfg index 935ffc0..d87058b 100644 --- a/board/freescale/ls1043ardb/ls1043ardb_rcw_nand.cfg +++ b/board/freescale/ls1043ardb/ls1043ardb_rcw_nand.cfg @@ -1,7 +1,7 @@ #PBL preamble and RCW header aa55aa55 01ee0100 # serdes protocol -0810000f 0c000000 00000000 00000000 -14550002 80004012 e0106000 61002000 +08100010 0a000000 00000000 00000000 +14550002 80004012 e0106000 c1002000 00000000 00000000 00000000 00038800 00000000 00001100 00000096 00000001 diff --git a/board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg b/board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg index 28cd958..e2ee34b 100644 --- a/board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg +++ b/board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg @@ -1,7 +1,7 @@ #PBL preamble and RCW header aa55aa55 01ee0100 # RCW -0810000f 0c000000 00000000 00000000 -14550002 80004012 60040000 61002000 +08100010 0a000000 00000000 00000000 +14550002 80004012 60040000 c1002000 00000000 00000000 00000000 00038800 00000000 00001100 00000096 00000001 diff --git a/board/freescale/ls2085a/Kconfig b/board/freescale/ls2080a/Kconfig index 042f85b..0b938ff 100644 --- a/board/freescale/ls2085a/Kconfig +++ b/board/freescale/ls2080a/Kconfig @@ -1,7 +1,7 @@ -if TARGET_LS2085A_EMU +if TARGET_LS2080A_EMU config SYS_BOARD - default "ls2085a" + default "ls2080a" config SYS_VENDOR default "freescale" @@ -10,14 +10,14 @@ config SYS_SOC default "fsl-layerscape" config SYS_CONFIG_NAME - default "ls2085a_emu" + default "ls2080a_emu" endif -if TARGET_LS2085A_SIMU +if TARGET_LS2080A_SIMU config SYS_BOARD - default "ls2085a" + default "ls2080a" config SYS_VENDOR default "freescale" @@ -26,6 +26,6 @@ config SYS_SOC default "fsl-layerscape" config SYS_CONFIG_NAME - default "ls2085a_simu" + default "ls2080a_simu" endif diff --git a/board/freescale/ls2080a/MAINTAINERS b/board/freescale/ls2080a/MAINTAINERS new file mode 100644 index 0000000..03ca168 --- /dev/null +++ b/board/freescale/ls2080a/MAINTAINERS @@ -0,0 +1,10 @@ +LS2080A BOARD +M: York Sun <yorksun@freescale.com> +S: Maintained +F: board/freescale/ls2080a/ +F: include/configs/ls2080a_emu.h +F: configs/ls2080a_emu_defconfig +F: include/configs/ls2080a_simu.h +F: configs/ls2080a_simu_defconfig +F: configs/ls2085a_emu_defconfig +F: configs/ls2085a_simu_defconfig diff --git a/board/freescale/ls2080a/Makefile b/board/freescale/ls2080a/Makefile new file mode 100644 index 0000000..47c7c74 --- /dev/null +++ b/board/freescale/ls2080a/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2014-15 Freescale Semiconductor +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += ls2080a.o +obj-y += ddr.o diff --git a/board/freescale/ls2085a/README b/board/freescale/ls2080a/README index bc1d0bb..7e53f1f 100644 --- a/board/freescale/ls2085a/README +++ b/board/freescale/ls2080a/README @@ -1,4 +1,4 @@ -Freescale ls2085a_emu +Freescale ls2080a_emu This is a emulator target with limited peripherals. diff --git a/board/freescale/ls2085a/ddr.c b/board/freescale/ls2080a/ddr.c index 4884fa2..56c5d96 100644 --- a/board/freescale/ls2085a/ddr.c +++ b/board/freescale/ls2080a/ddr.c @@ -71,7 +71,7 @@ found: pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb, pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2, pbsp->wrlvl_ctl_3); - +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR if (ctrl_num == CONFIG_DP_DDR_CTRL) { /* force DDR bus width to 32 bits */ popts->data_bus_width = 1; @@ -79,6 +79,7 @@ found: popts->burst_length = DDR_BL8; popts->bstopre = 0; /* enable auto precharge */ } +#endif /* * Factors to consider for half-strength driver enable: * - number of DIMMs installed @@ -174,14 +175,29 @@ void dram_init_banksize(void) phys_size_t dp_ddr_size; #endif + /* + * gd->secure_ram tracks the location of secure memory. + * It was set as if the memory starts from 0. + * The address needs to add the offset of its bank. + */ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; if (gd->ram_size > CONFIG_SYS_LS2_DDR_BLOCK1_SIZE) { gd->bd->bi_dram[0].size = CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE; gd->bd->bi_dram[1].size = gd->ram_size - CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + gd->secure_ram = gd->bd->bi_dram[1].start + + gd->secure_ram - + CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; +#endif } else { gd->bd->bi_dram[0].size = gd->ram_size; +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; +#endif } #ifdef CONFIG_SYS_DP_DDR_BASE_PHY diff --git a/board/freescale/ls2085a/ddr.h b/board/freescale/ls2080a/ddr.h index 9958a68..9958a68 100644 --- a/board/freescale/ls2085a/ddr.h +++ b/board/freescale/ls2080a/ddr.h diff --git a/board/freescale/ls2085a/ls2085a.c b/board/freescale/ls2080a/ls2080a.c index 27481e2..7bce8b0 100644 --- a/board/freescale/ls2085a/ls2085a.c +++ b/board/freescale/ls2080a/ls2080a.c @@ -41,11 +41,13 @@ void detail_board_ddr_info(void) puts("\nDDR "); print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, ""); print_ddr_info(0); +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR if (gd->bd->bi_dram[2].size) { puts("\nDP-DDR "); print_size(gd->bd->bi_dram[2].size, ""); print_ddr_info(CONFIG_DP_DDR_CTRL); } +#endif } int dram_init(void) @@ -66,23 +68,6 @@ int arch_misc_init(void) } #endif -unsigned long get_dram_size_to_hide(void) -{ - unsigned long dram_to_hide = 0; - -/* Carve the Debug Server private DRAM block from the end of DRAM */ -#ifdef CONFIG_FSL_DEBUG_SERVER - dram_to_hide += debug_server_get_dram_block_size(); -#endif - -/* Carve the MC private DRAM block from the end of DRAM */ -#ifdef CONFIG_FSL_MC_ENET - dram_to_hide += mc_get_dram_block_size(); -#endif - - return roundup(dram_to_hide, CONFIG_SYS_MEM_TOP_HIDE_MIN); -} - int board_eth_init(bd_t *bis) { int error = 0; diff --git a/board/freescale/ls2085aqds/Kconfig b/board/freescale/ls2080aqds/Kconfig index 8d6acba..2f997e9 100644 --- a/board/freescale/ls2085aqds/Kconfig +++ b/board/freescale/ls2080aqds/Kconfig @@ -1,8 +1,8 @@ -if TARGET_LS2085AQDS +if TARGET_LS2080AQDS config SYS_BOARD - default "ls2085aqds" + default "ls2080aqds" config SYS_VENDOR default "freescale" @@ -11,6 +11,6 @@ config SYS_SOC default "fsl-layerscape" config SYS_CONFIG_NAME - default "ls2085aqds" + default "ls2080aqds" endif diff --git a/board/freescale/ls2080aqds/MAINTAINERS b/board/freescale/ls2080aqds/MAINTAINERS new file mode 100644 index 0000000..6f99ad0 --- /dev/null +++ b/board/freescale/ls2080aqds/MAINTAINERS @@ -0,0 +1,10 @@ +LS2080A BOARD +M: Prabhakar Kushwaha <prabhakar@freescale.com> +S: Maintained +F: board/freescale/ls2080aqds/ +F: board/freescale/ls2080a/ls2080aqds.c +F: include/configs/ls2080aqds.h +F: configs/ls2080aqds_defconfig +F: configs/ls2080aqds_nand_defconfig +F: configs/ls2085aqds_defconfig +F: configs/ls2085aqds_nand_defconfig diff --git a/board/freescale/ls2085aqds/Makefile b/board/freescale/ls2080aqds/Makefile index da69a7d..e0da8a5 100644 --- a/board/freescale/ls2085aqds/Makefile +++ b/board/freescale/ls2080aqds/Makefile @@ -4,6 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += ls2085aqds.o +obj-y += ls2080aqds.o obj-y += ddr.o obj-y += eth.o diff --git a/board/freescale/ls2085aqds/README b/board/freescale/ls2080aqds/README index e4a6f69..375e97c 100644 --- a/board/freescale/ls2085aqds/README +++ b/board/freescale/ls2080aqds/README @@ -1,19 +1,19 @@ Overview -------- -The LS2085A Development System (QDS) is a high-performance computing, -evaluation, and development platform that supports the QorIQ LS2085A -Layerscape Architecture processor. The LS2085AQDS provides validation and -SW development platform for the Freescale LS2085A processor series, with +The LS2080A Development System (QDS) is a high-performance computing, +evaluation, and development platform that supports the QorIQ LS2080A +Layerscape Architecture processor. The LS2080AQDS provides validation and +SW development platform for the Freescale LS2080A processor series, with a complete debugging environment. -LS2085A SoC Overview +LS2080A SoC Overview ------------------ -The LS2085A integrated multicore processor combines eight ARM Cortex-A57 +The LS2080A integrated multicore processor combines eight ARM Cortex-A57 processor cores with high-performance data path acceleration logic and network and peripheral bus interfaces required for networking, telecom/datacom, wireless infrastructure, and mil/aerospace applications. -The LS2085A SoC includes the following function and features: +The LS2080A SoC includes the following function and features: - Eight 64-bit ARM Cortex-A57 CPUs - 1 MB platform cache with ECC @@ -50,7 +50,7 @@ The LS2085A SoC includes the following function and features: - Service processor (SP) provides pre-boot initialization and secure-boot capabilities - LS2085AQDS board Overview + LS2080AQDS board Overview ----------------------- - SERDES Connections, 16 lanes supporting: - PCI Express - 3.0 @@ -172,7 +172,7 @@ Supported PHY addresses during SGMII: #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe -Mapping DPMACx to PHY during QSGMII +Mapping DPMACx to PHY during SGMII DPMAC1 -> PHY1-P0 DPMAC2 -> PHY2-P0 DPMAC3 -> PHY3-P0 diff --git a/board/freescale/ls2085ardb/ddr.c b/board/freescale/ls2080aqds/ddr.c index 8d71ae1..9fb5e11 100644 --- a/board/freescale/ls2085ardb/ddr.c +++ b/board/freescale/ls2080aqds/ddr.c @@ -15,7 +15,9 @@ void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) { +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR u8 dq_mapping_0, dq_mapping_2, dq_mapping_3; +#endif const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; ulong ddr_freq; int slot; @@ -79,7 +81,7 @@ found: pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb, pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2, pbsp->wrlvl_ctl_3); - +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR if (ctrl_num == CONFIG_DP_DDR_CTRL) { /* force DDR bus width to 32 bits */ popts->data_bus_width = 1; @@ -114,6 +116,7 @@ found: pdimm[slot].dq_mapping[16] = 0; pdimm[slot].dq_mapping[17] = 0; } +#endif /* To work at higher than 1333MT/s */ popts->half_strength_driver_enable = 0; /* @@ -131,10 +134,18 @@ found: popts->zq_en = 1; if (ddr_freq < 2350) { - popts->ddr_cdr1 = DDR_CDR1_DHC_EN | - DDR_CDR1_ODT(DDR_CDR_ODT_60ohm); - popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) | - DDR_CDR2_VREF_RANGE_2; + if (pdimm[0].n_ranks == 2 && pdimm[1].n_ranks == 2) { + /* four chip-selects */ + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | + DDR_CDR1_ODT(DDR_CDR_ODT_80ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_80ohm); + popts->twot_en = 1; /* enable 2T timing */ + } else { + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | + DDR_CDR1_ODT(DDR_CDR_ODT_60ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) | + DDR_CDR2_VREF_RANGE_2; + } } else { popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_100ohm); @@ -164,14 +175,29 @@ void dram_init_banksize(void) phys_size_t dp_ddr_size; #endif + /* + * gd->secure_ram tracks the location of secure memory. + * It was set as if the memory starts from 0. + * The address needs to add the offset of its bank. + */ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; if (gd->ram_size > CONFIG_SYS_LS2_DDR_BLOCK1_SIZE) { gd->bd->bi_dram[0].size = CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE; gd->bd->bi_dram[1].size = gd->ram_size - CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + gd->secure_ram = gd->bd->bi_dram[1].start + + gd->secure_ram - + CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; +#endif } else { gd->bd->bi_dram[0].size = gd->ram_size; +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; +#endif } #ifdef CONFIG_SYS_DP_DDR_BASE_PHY diff --git a/board/freescale/ls2085aqds/ddr.h b/board/freescale/ls2080aqds/ddr.h index b76ea61..b76ea61 100644 --- a/board/freescale/ls2085aqds/ddr.h +++ b/board/freescale/ls2080aqds/ddr.h diff --git a/board/freescale/ls2085aqds/eth.c b/board/freescale/ls2080aqds/eth.c index b8a2bf4..0637ecf 100644 --- a/board/freescale/ls2085aqds/eth.c +++ b/board/freescale/ls2080aqds/eth.c @@ -18,16 +18,16 @@ #include "../common/qixis.h" -#include "ls2085aqds_qixis.h" +#include "ls2080aqds_qixis.h" #ifdef CONFIG_FSL_MC_ENET - /* - In LS2085A there are only 16 SERDES lanes, spread across 2 SERDES banks. + /* - In LS2080A there are only 16 SERDES lanes, spread across 2 SERDES banks. * Bank 1 -> Lanes A, B, C, D, E, F, G, H * Bank 2 -> Lanes A,B, C, D, E, F, G, H */ - /* Mapping of 16 SERDES lanes to LS2085A QDS board slots. A value of '0' here + /* Mapping of 16 SERDES lanes to LS2080A QDS board slots. A value of '0' here * means that the mapping must be determined dynamically, or that the lane * maps to something other than a board slot. */ @@ -74,16 +74,16 @@ static int sgmii_riser_phy_addr[] = { #define SFP_TX 0 static const char * const mdio_names[] = { - "LS2085A_QDS_MDIO0", - "LS2085A_QDS_MDIO1", - "LS2085A_QDS_MDIO2", - "LS2085A_QDS_MDIO3", - "LS2085A_QDS_MDIO4", - "LS2085A_QDS_MDIO5", + "LS2080A_QDS_MDIO0", + "LS2080A_QDS_MDIO1", + "LS2080A_QDS_MDIO2", + "LS2080A_QDS_MDIO3", + "LS2080A_QDS_MDIO4", + "LS2080A_QDS_MDIO5", DEFAULT_WRIOP_MDIO2_NAME, }; -struct ls2085a_qds_mdio { +struct ls2080a_qds_mdio { u8 muxval; struct mii_dev *realbus; }; @@ -95,7 +95,7 @@ static void sgmii_configure_repeater(int serdes_port) int i, j, ret; int dpmac_id = 0, dpmac, mii_bus = 0; unsigned short value; - char dev[2][20] = {"LS2085A_QDS_MDIO0", "LS2085A_QDS_MDIO3"}; + char dev[2][20] = {"LS2080A_QDS_MDIO0", "LS2080A_QDS_MDIO3"}; uint8_t i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5d, 0x5f, 0x60}; uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7}; @@ -222,7 +222,7 @@ static void qsgmii_configure_repeater(int dpmac) uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7}; uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84}; - const char *dev = "LS2085A_QDS_MDIO0"; + const char *dev = "LS2080A_QDS_MDIO0"; int ret = 0; unsigned short value; @@ -318,7 +318,7 @@ error: return; } -static const char *ls2085a_qds_mdio_name_for_muxval(u8 muxval) +static const char *ls2080a_qds_mdio_name_for_muxval(u8 muxval) { return mdio_names[muxval]; } @@ -326,7 +326,7 @@ static const char *ls2085a_qds_mdio_name_for_muxval(u8 muxval) struct mii_dev *mii_dev_for_muxval(u8 muxval) { struct mii_dev *bus; - const char *name = ls2085a_qds_mdio_name_for_muxval(muxval); + const char *name = ls2080a_qds_mdio_name_for_muxval(muxval); if (!name) { printf("No bus for muxval %x\n", muxval); @@ -343,7 +343,7 @@ struct mii_dev *mii_dev_for_muxval(u8 muxval) return bus; } -static void ls2085a_qds_enable_SFP_TX(u8 muxval) +static void ls2080a_qds_enable_SFP_TX(u8 muxval) { u8 brdcfg9; @@ -353,7 +353,7 @@ static void ls2085a_qds_enable_SFP_TX(u8 muxval) QIXIS_WRITE(brdcfg[9], brdcfg9); } -static void ls2085a_qds_mux_mdio(u8 muxval) +static void ls2080a_qds_mux_mdio(u8 muxval) { u8 brdcfg4; @@ -365,54 +365,54 @@ static void ls2085a_qds_mux_mdio(u8 muxval) } } -static int ls2085a_qds_mdio_read(struct mii_dev *bus, int addr, +static int ls2080a_qds_mdio_read(struct mii_dev *bus, int addr, int devad, int regnum) { - struct ls2085a_qds_mdio *priv = bus->priv; + struct ls2080a_qds_mdio *priv = bus->priv; - ls2085a_qds_mux_mdio(priv->muxval); + ls2080a_qds_mux_mdio(priv->muxval); return priv->realbus->read(priv->realbus, addr, devad, regnum); } -static int ls2085a_qds_mdio_write(struct mii_dev *bus, int addr, int devad, +static int ls2080a_qds_mdio_write(struct mii_dev *bus, int addr, int devad, int regnum, u16 value) { - struct ls2085a_qds_mdio *priv = bus->priv; + struct ls2080a_qds_mdio *priv = bus->priv; - ls2085a_qds_mux_mdio(priv->muxval); + ls2080a_qds_mux_mdio(priv->muxval); return priv->realbus->write(priv->realbus, addr, devad, regnum, value); } -static int ls2085a_qds_mdio_reset(struct mii_dev *bus) +static int ls2080a_qds_mdio_reset(struct mii_dev *bus) { - struct ls2085a_qds_mdio *priv = bus->priv; + struct ls2080a_qds_mdio *priv = bus->priv; return priv->realbus->reset(priv->realbus); } -static int ls2085a_qds_mdio_init(char *realbusname, u8 muxval) +static int ls2080a_qds_mdio_init(char *realbusname, u8 muxval) { - struct ls2085a_qds_mdio *pmdio; + struct ls2080a_qds_mdio *pmdio; struct mii_dev *bus = mdio_alloc(); if (!bus) { - printf("Failed to allocate ls2085a_qds MDIO bus\n"); + printf("Failed to allocate ls2080a_qds MDIO bus\n"); return -1; } pmdio = malloc(sizeof(*pmdio)); if (!pmdio) { - printf("Failed to allocate ls2085a_qds private data\n"); + printf("Failed to allocate ls2080a_qds private data\n"); free(bus); return -1; } - bus->read = ls2085a_qds_mdio_read; - bus->write = ls2085a_qds_mdio_write; - bus->reset = ls2085a_qds_mdio_reset; - sprintf(bus->name, ls2085a_qds_mdio_name_for_muxval(muxval)); + bus->read = ls2080a_qds_mdio_read; + bus->write = ls2080a_qds_mdio_write; + bus->reset = ls2080a_qds_mdio_reset; + sprintf(bus->name, ls2080a_qds_mdio_name_for_muxval(muxval)); pmdio->realbus = miiphy_get_dev_by_name(realbusname); @@ -474,8 +474,8 @@ static void initialize_dpmac_to_slot(void) serdes1_prtcl); break; default: - printf("qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n", - serdes1_prtcl); + printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n", + __func__, serdes1_prtcl); break; } @@ -505,13 +505,13 @@ static void initialize_dpmac_to_slot(void) } break; default: - printf("qds: WRIOP: Unsupported SerDes2 Protocol 0x%02x\n", - serdes2_prtcl); + printf(" %s qds: WRIOP: Unsupported SerDes2 Protocol 0x%02x\n", + __func__ , serdes2_prtcl); break; } } -void ls2085a_handle_phy_interface_sgmii(int dpmac_id) +void ls2080a_handle_phy_interface_sgmii(int dpmac_id) { int lane, slot; struct mii_dev *bus; @@ -580,8 +580,8 @@ void ls2085a_handle_phy_interface_sgmii(int dpmac_id) } break; default: - printf("qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n", - serdes1_prtcl); + printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n", + __func__ , serdes1_prtcl); break; } @@ -626,13 +626,13 @@ serdes2: } break; default: - printf("qds: WRIOP: Unsupported SerDes2 Protocol 0x%02x\n", - serdes2_prtcl); + printf("%s qds: WRIOP: Unsupported SerDes2 Protocol 0x%02x\n", + __func__, serdes2_prtcl); break; } } -void ls2085a_handle_phy_interface_qsgmii(int dpmac_id) +void ls2080a_handle_phy_interface_qsgmii(int dpmac_id) { int lane = 0, slot; struct mii_dev *bus; @@ -706,7 +706,7 @@ void ls2085a_handle_phy_interface_qsgmii(int dpmac_id) qsgmii_configure_repeater(dpmac_id); } -void ls2085a_handle_phy_interface_xsgmii(int i) +void ls2080a_handle_phy_interface_xsgmii(int i) { struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; int serdes1_prtcl = (in_le32(&gur->rcwsr[28]) & @@ -725,7 +725,7 @@ void ls2085a_handle_phy_interface_xsgmii(int i) * error. */ wriop_set_phy_address(i, i + 4); - ls2085a_qds_enable_SFP_TX(SFP_TX); + ls2080a_qds_enable_SFP_TX(SFP_TX); break; default: @@ -778,25 +778,25 @@ int board_eth_init(bd_t *bis) fm_memac_mdio_init(bis, memac_mdio1_info); /* Register the muxing front-ends to the MDIO buses */ - ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT1); - ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT2); - ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT3); - ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT4); - ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT5); - ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT6); + ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT1); + ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT2); + ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT3); + ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT4); + ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT5); + ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT6); - ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO2_NAME, EMI2); + ls2080a_qds_mdio_init(DEFAULT_WRIOP_MDIO2_NAME, EMI2); for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) { switch (wriop_get_enet_if(i)) { case PHY_INTERFACE_MODE_QSGMII: - ls2085a_handle_phy_interface_qsgmii(i); + ls2080a_handle_phy_interface_qsgmii(i); break; case PHY_INTERFACE_MODE_SGMII: - ls2085a_handle_phy_interface_sgmii(i); + ls2080a_handle_phy_interface_sgmii(i); break; case PHY_INTERFACE_MODE_XGMII: - ls2085a_handle_phy_interface_xsgmii(i); + ls2080a_handle_phy_interface_xsgmii(i); break; default: break; diff --git a/board/freescale/ls2085aqds/ls2085aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c index b02d6e8..aa256a2 100644 --- a/board/freescale/ls2085aqds/ls2085aqds.c +++ b/board/freescale/ls2080aqds/ls2080aqds.c @@ -21,7 +21,7 @@ #include <hwconfig.h> #include "../common/qixis.h" -#include "ls2085aqds_qixis.h" +#include "ls2080aqds_qixis.h" #define PIN_MUX_SEL_SDHC 0x00 #define PIN_MUX_SEL_DSPI 0x0a @@ -226,11 +226,13 @@ void detail_board_ddr_info(void) puts("\nDDR "); print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, ""); print_ddr_info(0); +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR if (gd->bd->bi_dram[2].size) { puts("\nDP-DDR "); print_size(gd->bd->bi_dram[2].size, ""); print_ddr_info(CONFIG_DP_DDR_CTRL); } +#endif } int dram_init(void) @@ -251,23 +253,6 @@ int arch_misc_init(void) } #endif -unsigned long get_dram_size_to_hide(void) -{ - unsigned long dram_to_hide = 0; - -/* Carve the Debug Server private DRAM block from the end of DRAM */ -#ifdef CONFIG_FSL_DEBUG_SERVER - dram_to_hide += debug_server_get_dram_block_size(); -#endif - -/* Carve the MC private DRAM block from the end of DRAM */ -#ifdef CONFIG_FSL_MC_ENET - dram_to_hide += mc_get_dram_block_size(); -#endif - - return roundup(dram_to_hide, CONFIG_SYS_MEM_TOP_HIDE_MIN); -} - #ifdef CONFIG_FSL_MC_ENET void fdt_fixup_board_enet(void *fdt) { @@ -294,6 +279,7 @@ void fdt_fixup_board_enet(void *fdt) #ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { + int err; u64 base[CONFIG_NR_DRAM_BANKS]; u64 size[CONFIG_NR_DRAM_BANKS]; @@ -309,7 +295,9 @@ int ft_board_setup(void *blob, bd_t *bd) #ifdef CONFIG_FSL_MC_ENET fdt_fixup_board_enet(blob); - fsl_mc_ldpaa_exit(bd); + err = fsl_mc_ldpaa_exit(bd); + if (err) + return err; #endif return 0; diff --git a/board/freescale/ls2085aqds/ls2085aqds_qixis.h b/board/freescale/ls2080aqds/ls2080aqds_qixis.h index e281e5f..e281e5f 100644 --- a/board/freescale/ls2085aqds/ls2085aqds_qixis.h +++ b/board/freescale/ls2080aqds/ls2080aqds_qixis.h diff --git a/board/freescale/ls2085ardb/Kconfig b/board/freescale/ls2080ardb/Kconfig index cb40db9..fe02575 100644 --- a/board/freescale/ls2085ardb/Kconfig +++ b/board/freescale/ls2080ardb/Kconfig @@ -1,8 +1,8 @@ -if TARGET_LS2085ARDB +if TARGET_LS2080ARDB config SYS_BOARD - default "ls2085ardb" + default "ls2080ardb" config SYS_VENDOR default "freescale" @@ -11,6 +11,6 @@ config SYS_SOC default "fsl-layerscape" config SYS_CONFIG_NAME - default "ls2085ardb" + default "ls2080ardb" endif diff --git a/board/freescale/ls2080ardb/MAINTAINERS b/board/freescale/ls2080ardb/MAINTAINERS new file mode 100644 index 0000000..c9f3459 --- /dev/null +++ b/board/freescale/ls2080ardb/MAINTAINERS @@ -0,0 +1,10 @@ +LS2080A BOARD +M: Prabhakar Kushwaha <prabhakar@freescale.com> +S: Maintained +F: board/freescale/ls2080ardb/ +F: board/freescale/ls2080a/ls2080ardb.c +F: include/configs/ls2080ardb.h +F: configs/ls2080ardb_defconfig +F: configs/ls2080ardb_nand_defconfig +F: configs/ls2085ardb_defconfig +F: configs/ls2085ardb_nand_defconfig diff --git a/board/freescale/ls2085ardb/Makefile b/board/freescale/ls2080ardb/Makefile index de383cc..6a52167 100644 --- a/board/freescale/ls2085ardb/Makefile +++ b/board/freescale/ls2080ardb/Makefile @@ -4,5 +4,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += ls2085ardb.o eth_ls2085rdb.o +obj-y += ls2080ardb.o eth_ls2080rdb.o obj-y += ddr.o diff --git a/board/freescale/ls2085ardb/README b/board/freescale/ls2080ardb/README index 2f18243..7fc2569 100644 --- a/board/freescale/ls2085ardb/README +++ b/board/freescale/ls2080ardb/README @@ -1,17 +1,17 @@ Overview -------- -The LS2085A Reference Design (RDB) is a high-performance computing, -evaluation, and development platform that supports the QorIQ LS2085A +The LS2080A Reference Design (RDB) is a high-performance computing, +evaluation, and development platform that supports the QorIQ LS2080A Layerscape Architecture processor. -LS2085A SoC Overview +LS2080A SoC Overview ------------------ -The LS2085A integrated multicore processor combines eight ARM Cortex-A57 +The LS2080A integrated multicore processor combines eight ARM Cortex-A57 processor cores with high-performance data path acceleration logic and network and peripheral bus interfaces required for networking, telecom/datacom, wireless infrastructure, and mil/aerospace applications. -The LS2085A SoC includes the following function and features: +The LS2080A SoC includes the following function and features: - Eight 64-bit ARM Cortex-A57 CPUs - 1 MB platform cache with ECC @@ -48,7 +48,7 @@ The LS2085A SoC includes the following function and features: - Service processor (SP) provides pre-boot initialization and secure-boot capabilities - LS2085ARDB board Overview + LS2080ARDB board Overview ----------------------- - SERDES Connections, 16 lanes supporting: - PCI Express - 3.0 diff --git a/board/freescale/ls2085aqds/ddr.c b/board/freescale/ls2080ardb/ddr.c index 8d71ae1..6c19173 100644 --- a/board/freescale/ls2085aqds/ddr.c +++ b/board/freescale/ls2080ardb/ddr.c @@ -15,7 +15,9 @@ void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) { +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR u8 dq_mapping_0, dq_mapping_2, dq_mapping_3; +#endif const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; ulong ddr_freq; int slot; @@ -79,7 +81,7 @@ found: pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb, pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2, pbsp->wrlvl_ctl_3); - +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR if (ctrl_num == CONFIG_DP_DDR_CTRL) { /* force DDR bus width to 32 bits */ popts->data_bus_width = 1; @@ -114,6 +116,7 @@ found: pdimm[slot].dq_mapping[16] = 0; pdimm[slot].dq_mapping[17] = 0; } +#endif /* To work at higher than 1333MT/s */ popts->half_strength_driver_enable = 0; /* @@ -131,10 +134,18 @@ found: popts->zq_en = 1; if (ddr_freq < 2350) { - popts->ddr_cdr1 = DDR_CDR1_DHC_EN | - DDR_CDR1_ODT(DDR_CDR_ODT_60ohm); - popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) | - DDR_CDR2_VREF_RANGE_2; + if (pdimm[0].n_ranks == 2 && pdimm[1].n_ranks == 2) { + /* four chip-selects */ + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | + DDR_CDR1_ODT(DDR_CDR_ODT_80ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_80ohm); + popts->twot_en = 1; /* enable 2T timing */ + } else { + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | + DDR_CDR1_ODT(DDR_CDR_ODT_60ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) | + DDR_CDR2_VREF_RANGE_2; + } } else { popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_100ohm); @@ -164,14 +175,29 @@ void dram_init_banksize(void) phys_size_t dp_ddr_size; #endif + /* + * gd->secure_ram tracks the location of secure memory. + * It was set as if the memory starts from 0. + * The address needs to add the offset of its bank. + */ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; if (gd->ram_size > CONFIG_SYS_LS2_DDR_BLOCK1_SIZE) { gd->bd->bi_dram[0].size = CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE; gd->bd->bi_dram[1].size = gd->ram_size - CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + gd->secure_ram = gd->bd->bi_dram[1].start + + gd->secure_ram - + CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; +#endif } else { gd->bd->bi_dram[0].size = gd->ram_size; +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; +#endif } #ifdef CONFIG_SYS_DP_DDR_BASE_PHY diff --git a/board/freescale/ls2085ardb/ddr.h b/board/freescale/ls2080ardb/ddr.h index bda9d4a..bda9d4a 100644 --- a/board/freescale/ls2085ardb/ddr.h +++ b/board/freescale/ls2080ardb/ddr.h diff --git a/board/freescale/ls2085ardb/eth_ls2085rdb.c b/board/freescale/ls2080ardb/eth_ls2080rdb.c index d578757..db50e4e 100644 --- a/board/freescale/ls2085ardb/eth_ls2085rdb.c +++ b/board/freescale/ls2080ardb/eth_ls2080rdb.c @@ -97,7 +97,7 @@ int board_eth_init(bd_t *bis) break; default: - printf("SerDes1 protocol 0x%x is not supported on LS2085aRDB\n", + printf("SerDes1 protocol 0x%x is not supported on LS2080aRDB\n", srds_s1); break; } diff --git a/board/freescale/ls2085ardb/ls2085ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c index 18953b8..c63b639 100644 --- a/board/freescale/ls2085ardb/ls2085ardb.c +++ b/board/freescale/ls2080ardb/ls2080ardb.c @@ -20,7 +20,7 @@ #include <asm/arch/soc.h> #include "../common/qixis.h" -#include "ls2085ardb_qixis.h" +#include "ls2080ardb_qixis.h" #define PIN_MUX_SEL_SDHC 0x00 #define PIN_MUX_SEL_DSPI 0x0a @@ -192,11 +192,13 @@ void detail_board_ddr_info(void) puts("\nDDR "); print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, ""); print_ddr_info(0); +#ifdef CONFIG_SYS_FSL_HAS_DP_DDR if (gd->bd->bi_dram[2].size) { puts("\nDP-DDR "); print_size(gd->bd->bi_dram[2].size, ""); print_ddr_info(CONFIG_DP_DDR_CTRL); } +#endif } int dram_init(void) @@ -217,23 +219,6 @@ int arch_misc_init(void) } #endif -unsigned long get_dram_size_to_hide(void) -{ - unsigned long dram_to_hide = 0; - -/* Carve the Debug Server private DRAM block from the end of DRAM */ -#ifdef CONFIG_FSL_DEBUG_SERVER - dram_to_hide += debug_server_get_dram_block_size(); -#endif - -/* Carve the MC private DRAM block from the end of DRAM */ -#ifdef CONFIG_FSL_MC_ENET - dram_to_hide += mc_get_dram_block_size(); -#endif - - return roundup(dram_to_hide, CONFIG_SYS_MEM_TOP_HIDE_MIN); -} - #ifdef CONFIG_FSL_MC_ENET void fdt_fixup_board_enet(void *fdt) { @@ -260,6 +245,7 @@ void fdt_fixup_board_enet(void *fdt) #ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { + int err; u64 base[CONFIG_NR_DRAM_BANKS]; u64 size[CONFIG_NR_DRAM_BANKS]; @@ -275,7 +261,9 @@ int ft_board_setup(void *blob, bd_t *bd) #ifdef CONFIG_FSL_MC_ENET fdt_fixup_board_enet(blob); - fsl_mc_ldpaa_exit(bd); + err = fsl_mc_ldpaa_exit(bd); + if (err) + return err; #endif return 0; diff --git a/board/freescale/ls2085ardb/ls2085ardb_qixis.h b/board/freescale/ls2080ardb/ls2080ardb_qixis.h index cb60c00..cb60c00 100644 --- a/board/freescale/ls2085ardb/ls2085ardb_qixis.h +++ b/board/freescale/ls2080ardb/ls2080ardb_qixis.h diff --git a/board/freescale/ls2085a/MAINTAINERS b/board/freescale/ls2085a/MAINTAINERS deleted file mode 100644 index 90b4e47..0000000 --- a/board/freescale/ls2085a/MAINTAINERS +++ /dev/null @@ -1,8 +0,0 @@ -LS2085A BOARD -M: York Sun <yorksun@freescale.com> -S: Maintained -F: board/freescale/ls2085a/ -F: include/configs/ls2085a_emu.h -F: configs/ls2085a_emu_defconfig -F: include/configs/ls2085a_simu.h -F: configs/ls2085a_simu_defconfig diff --git a/board/freescale/ls2085a/Makefile b/board/freescale/ls2085a/Makefile deleted file mode 100644 index 701b35c..0000000 --- a/board/freescale/ls2085a/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright 2014 Freescale Semiconductor -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += ls2085a.o -obj-y += ddr.o diff --git a/board/freescale/ls2085aqds/MAINTAINERS b/board/freescale/ls2085aqds/MAINTAINERS deleted file mode 100644 index fbed672..0000000 --- a/board/freescale/ls2085aqds/MAINTAINERS +++ /dev/null @@ -1,8 +0,0 @@ -LS2085A BOARD -M: Prabhakar Kushwaha <prabhakar@freescale.com> -S: Maintained -F: board/freescale/ls2085aqds/ -F: board/freescale/ls2085a/ls2085aqds.c -F: include/configs/ls2085aqds.h -F: configs/ls2085aqds_defconfig -F: configs/ls2085aqds_nand_defconfig diff --git a/board/freescale/ls2085ardb/MAINTAINERS b/board/freescale/ls2085ardb/MAINTAINERS deleted file mode 100644 index d5cce40..0000000 --- a/board/freescale/ls2085ardb/MAINTAINERS +++ /dev/null @@ -1,8 +0,0 @@ -LS2085A BOARD -M: Prabhakar Kushwaha <prabhakar@freescale.com> -S: Maintained -F: board/freescale/ls2085ardb/ -F: board/freescale/ls2085a/ls2085ardb.c -F: include/configs/ls2085ardb.h -F: configs/ls2085ardb_defconfig -F: configs/ls2085ardb_nand_defconfig diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c b/board/freescale/mx7dsabresd/mx7dsabresd.c index 6c863da..f8ae973 100644 --- a/board/freescale/mx7dsabresd/mx7dsabresd.c +++ b/board/freescale/mx7dsabresd/mx7dsabresd.c @@ -44,6 +44,9 @@ DECLARE_GLOBAL_DATA_PTR; #define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \ PAD_CTL_DSE_3P3V_49OHM) +#define QSPI_PAD_CTRL \ + (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM) + #ifdef CONFIG_SYS_I2C_MXC #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) /* I2C1 for PMIC */ @@ -455,6 +458,29 @@ int board_phy_config(struct phy_device *phydev) } #endif +#ifdef CONFIG_FSL_QSPI +static iomux_v3_cfg_t const quadspi_pads[] = { + MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 | MUX_PAD_CTRL(QSPI_PAD_CTRL), + MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 | MUX_PAD_CTRL(QSPI_PAD_CTRL), + MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 | MUX_PAD_CTRL(QSPI_PAD_CTRL), + MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 | MUX_PAD_CTRL(QSPI_PAD_CTRL), + MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK | MUX_PAD_CTRL(QSPI_PAD_CTRL), + MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL), +}; + +int board_qspi_init(void) +{ + /* Set the iomux */ + imx_iomux_v3_setup_multiple_pads(quadspi_pads, + ARRAY_SIZE(quadspi_pads)); + + /* Set the clock */ + set_clk_qspi(); + + return 0; +} +#endif + int board_early_init_f(void) { setup_iomux_uart(); @@ -481,6 +507,10 @@ int board_init(void) setup_lcd(); #endif +#ifdef CONFIG_FSL_QSPI + board_qspi_init(); +#endif + return 0; } |