summaryrefslogtreecommitdiff
path: root/board/gateworks
diff options
context:
space:
mode:
Diffstat (limited to 'board/gateworks')
-rw-r--r--board/gateworks/gw_ventana/eeprom.c168
-rw-r--r--board/gateworks/gw_ventana/gsc.c2
-rw-r--r--board/gateworks/gw_ventana/gw_ventana.c271
-rw-r--r--board/gateworks/gw_ventana/ventana_eeprom.h11
4 files changed, 294 insertions, 158 deletions
diff --git a/board/gateworks/gw_ventana/eeprom.c b/board/gateworks/gw_ventana/eeprom.c
index e90186e..3edc915 100644
--- a/board/gateworks/gw_ventana/eeprom.c
+++ b/board/gateworks/gw_ventana/eeprom.c
@@ -6,7 +6,10 @@
*/
#include <common.h>
+#include <errno.h>
#include <i2c.h>
+#include <malloc.h>
+#include <asm/bitops.h>
#include "gsc.h"
#include "ventana_eeprom.h"
@@ -38,14 +41,12 @@ read_eeprom(int bus, struct ventana_board_info *info)
/* read eeprom config section */
if (gsc_i2c_read(GSC_EEPROM_ADDR, 0x00, 1, buf, sizeof(*info))) {
puts("EEPROM: Failed to read EEPROM\n");
- info->model[0] = 0;
return GW_UNKNOWN;
}
/* sanity checks */
if (info->model[0] != 'G' || info->model[1] != 'W') {
puts("EEPROM: Invalid Model in EEPROM\n");
- info->model[0] = 0;
return GW_UNKNOWN;
}
@@ -55,7 +56,6 @@ read_eeprom(int bus, struct ventana_board_info *info)
if ((info->chksum[0] != chksum>>8) ||
(info->chksum[1] != (chksum&0xff))) {
puts("EEPROM: Failed EEPROM checksum\n");
- info->model[0] = 0;
return GW_UNKNOWN;
}
@@ -87,3 +87,165 @@ read_eeprom(int bus, struct ventana_board_info *info)
}
return type;
}
+
+/* list of config bits that the bootloader will remove from dtb if not set */
+struct ventana_eeprom_config econfig[] = {
+ { "eth0", "ethernet0", EECONFIG_ETH0 },
+ { "eth1", "ethernet1", EECONFIG_ETH1 },
+ { "sata", "ahci0", EECONFIG_SATA },
+ { "pcie", NULL, EECONFIG_PCIE},
+ { "lvds0", NULL, EECONFIG_LVDS0 },
+ { "lvds1", NULL, EECONFIG_LVDS1 },
+ { "usb0", NULL, EECONFIG_USB0 },
+ { "usb1", NULL, EECONFIG_USB1 },
+ { "mmc0", NULL, EECONFIG_SD0 },
+ { "mmc1", NULL, EECONFIG_SD1 },
+ { "mmc2", NULL, EECONFIG_SD2 },
+ { "mmc3", NULL, EECONFIG_SD3 },
+ { "uart0", NULL, EECONFIG_UART0 },
+ { "uart1", NULL, EECONFIG_UART1 },
+ { "uart2", NULL, EECONFIG_UART2 },
+ { "uart3", NULL, EECONFIG_UART3 },
+ { "uart4", NULL, EECONFIG_UART4 },
+ { "ipu0", NULL, EECONFIG_IPU0 },
+ { "ipu1", NULL, EECONFIG_IPU1 },
+ { "can0", NULL, EECONFIG_FLEXCAN },
+ { "i2c0", NULL, EECONFIG_I2C0 },
+ { "i2c1", NULL, EECONFIG_I2C1 },
+ { "i2c2", NULL, EECONFIG_I2C2 },
+ { "vpu", NULL, EECONFIG_VPU },
+ { "csi0", NULL, EECONFIG_CSI0 },
+ { "csi1", NULL, EECONFIG_CSI1 },
+ { "spi0", NULL, EECONFIG_ESPCI0 },
+ { "spi1", NULL, EECONFIG_ESPCI1 },
+ { "spi2", NULL, EECONFIG_ESPCI2 },
+ { "spi3", NULL, EECONFIG_ESPCI3 },
+ { "spi4", NULL, EECONFIG_ESPCI4 },
+ { "spi5", NULL, EECONFIG_ESPCI5 },
+ { "gps", "pps", EECONFIG_GPS },
+ { "hdmi_in", NULL, EECONFIG_HDMI_IN },
+ { "hdmi_out", NULL, EECONFIG_HDMI_OUT },
+ { "cvbs_in", NULL, EECONFIG_VID_IN },
+ { "cvbs_out", NULL, EECONFIG_VID_OUT },
+ { "nand", NULL, EECONFIG_NAND },
+ { /* Sentinel */ }
+};
+
+#ifdef CONFIG_CMD_EECONFIG
+static struct ventana_eeprom_config *get_config(const char *name)
+{
+ struct ventana_eeprom_config *cfg = econfig;
+
+ while (cfg->name) {
+ if (0 == strcmp(name, cfg->name))
+ return cfg;
+ cfg++;
+ }
+ return NULL;
+}
+
+static u8 econfig_bytes[sizeof(ventana_info.config)];
+static int econfig_init = -1;
+
+int do_econfig(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ struct ventana_eeprom_config *cfg;
+ struct ventana_board_info *info = &ventana_info;
+ int i;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ /* initialize */
+ if (econfig_init != 1) {
+ memcpy(econfig_bytes, info->config, sizeof(econfig_bytes));
+ econfig_init = 1;
+ }
+
+ /* list configs */
+ if ((strncmp(argv[1], "list", 4) == 0)) {
+ cfg = econfig;
+ while (cfg->name) {
+ printf("%s: %d\n", cfg->name,
+ test_bit(cfg->bit, econfig_bytes) ? 1 : 0);
+ cfg++;
+ }
+ }
+
+ /* save */
+ else if ((strncmp(argv[1], "save", 4) == 0)) {
+ unsigned char *buf = (unsigned char *)info;
+ int chksum;
+
+ /* calculate new checksum */
+ memcpy(info->config, econfig_bytes, sizeof(econfig_bytes));
+ for (chksum = 0, i = 0; i < sizeof(*info)-2; i++)
+ chksum += buf[i];
+ debug("old chksum:0x%04x\n",
+ (info->chksum[0] << 8) | info->chksum[1]);
+ debug("new chksum:0x%04x\n", chksum);
+ info->chksum[0] = chksum >> 8;
+ info->chksum[1] = chksum & 0xff;
+
+ /* write new config data */
+ if (gsc_i2c_write(GSC_EEPROM_ADDR, info->config - (u8 *)info,
+ 1, econfig_bytes, sizeof(econfig_bytes))) {
+ printf("EEPROM: Failed updating config\n");
+ return CMD_RET_FAILURE;
+ }
+
+ /* write new config data */
+ if (gsc_i2c_write(GSC_EEPROM_ADDR, info->chksum - (u8 *)info,
+ 1, info->chksum, 2)) {
+ printf("EEPROM: Failed updating checksum\n");
+ return CMD_RET_FAILURE;
+ }
+
+ printf("Config saved to EEPROM\n");
+ }
+
+ /* get config */
+ else if (argc == 2) {
+ cfg = get_config(argv[1]);
+ if (cfg) {
+ printf("%s: %d\n", cfg->name,
+ test_bit(cfg->bit, econfig_bytes) ? 1 : 0);
+ } else {
+ printf("invalid config: %s\n", argv[1]);
+ return CMD_RET_FAILURE;
+ }
+ }
+
+ /* set config */
+ else if (argc == 3) {
+ cfg = get_config(argv[1]);
+ if (cfg) {
+ if (simple_strtol(argv[2], NULL, 10)) {
+ test_and_set_bit(cfg->bit, econfig_bytes);
+ printf("Enabled %s\n", cfg->name);
+ } else {
+ test_and_clear_bit(cfg->bit, econfig_bytes);
+ printf("Disabled %s\n", cfg->name);
+ }
+ } else {
+ printf("invalid config: %s\n", argv[1]);
+ return CMD_RET_FAILURE;
+ }
+ }
+
+ else
+ return CMD_RET_USAGE;
+
+ return CMD_RET_SUCCESS;
+}
+
+U_BOOT_CMD(
+ econfig, 3, 0, do_econfig,
+ "EEPROM configuration",
+ "list - list config\n"
+ "save - save config to EEPROM\n"
+ "<name> - get config 'name'\n"
+ "<name> [0|1] - set config 'name' to value\n"
+);
+
+#endif /* CONFIG_CMD_EECONFIG */
diff --git a/board/gateworks/gw_ventana/gsc.c b/board/gateworks/gw_ventana/gsc.c
index 37966ab..1cf38d4 100644
--- a/board/gateworks/gw_ventana/gsc.c
+++ b/board/gateworks/gw_ventana/gsc.c
@@ -57,7 +57,7 @@ int gsc_i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
break;
mdelay(10);
}
- mdelay(1);
+ mdelay(100);
return ret;
}
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index 9d2651f..a222921 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -50,10 +50,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define GP_RS232_EN IMX_GPIO_NR(2, 11)
#define GP_MSATA_SEL IMX_GPIO_NR(2, 8)
-/* I2C bus numbers */
-#define I2C_GSC 0
-#define I2C_PMIC 1
-
#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
@@ -78,11 +74,18 @@ DECLARE_GLOBAL_DATA_PTR;
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+#define IRQ_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_34ohm | PAD_CTL_HYS | PAD_CTL_SRE_FAST)
+
+#define DIO_PAD_CFG (MUX_PAD_CTRL(DIO_PAD_CTRL) | MUX_MODE_SION)
+
+
/*
* EEPROM board info struct populated by read_eeprom so that we only have to
* read it once.
*/
-static struct ventana_board_info ventana_info;
+struct ventana_board_info ventana_info;
int board_type;
@@ -187,7 +190,7 @@ iomux_v3_cfg_t const usdhc3_pads[] = {
IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
/* CD */
- IOMUX_PADS(PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(IRQ_PAD_CTRL)),
};
/* ENET */
@@ -211,7 +214,7 @@ iomux_v3_cfg_t const enet_pads[] = {
IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL |
MUX_PAD_CTRL(ENET_PAD_CTRL)),
/* PHY nRST */
- IOMUX_PADS(PAD_ENET_TXD0__GPIO1_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_ENET_TXD0__GPIO1_IO30 | DIO_PAD_CFG),
};
/* NAND */
@@ -281,10 +284,10 @@ static void setup_iomux_uart(void)
#ifdef CONFIG_USB_EHCI_MX6
iomux_v3_cfg_t const usb_pads[] = {
- IOMUX_PADS(PAD_GPIO_1__USB_OTG_ID | MUX_PAD_CTRL(DIO_PAD_CTRL)),
- IOMUX_PADS(PAD_KEY_COL4__USB_OTG_OC | MUX_PAD_CTRL(DIO_PAD_CTRL)),
+ IOMUX_PADS(PAD_GPIO_1__USB_OTG_ID | DIO_PAD_CFG),
+ IOMUX_PADS(PAD_KEY_COL4__USB_OTG_OC | DIO_PAD_CFG),
/* OTG PWR */
- IOMUX_PADS(PAD_EIM_D22__GPIO3_IO22 | MUX_PAD_CTRL(DIO_PAD_CTRL)),
+ IOMUX_PADS(PAD_EIM_D22__GPIO3_IO22 | DIO_PAD_CFG),
};
int board_ehci_hcd_init(int port)
@@ -296,15 +299,13 @@ int board_ehci_hcd_init(int port)
/* Reset USB HUB (present on GW54xx/GW53xx) */
switch (info->model[3]) {
case '3': /* GW53xx */
- SETUP_IOMUX_PAD(PAD_GPIO_9__GPIO1_IO09 |
- MUX_PAD_CTRL(NO_PAD_CTRL));
+ SETUP_IOMUX_PAD(PAD_GPIO_9__GPIO1_IO09 | DIO_PAD_CFG);
gpio_direction_output(IMX_GPIO_NR(1, 9), 0);
mdelay(2);
gpio_set_value(IMX_GPIO_NR(1, 9), 1);
break;
case '4': /* GW54xx */
- SETUP_IOMUX_PAD(PAD_SD1_DAT0__GPIO1_IO16 |
- MUX_PAD_CTRL(NO_PAD_CTRL));
+ SETUP_IOMUX_PAD(PAD_SD1_DAT0__GPIO1_IO16 | DIO_PAD_CFG);
gpio_direction_output(IMX_GPIO_NR(1, 16), 0);
mdelay(2);
gpio_set_value(IMX_GPIO_NR(1, 16), 1);
@@ -426,7 +427,7 @@ static void enable_lvds(struct display_info_t const *dev)
writel(reg, &iomux->gpr[2]);
/* Enable Backlight */
- SETUP_IOMUX_PAD(PAD_SD1_CMD__GPIO1_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL));
+ SETUP_IOMUX_PAD(PAD_SD1_CMD__GPIO1_IO18 | DIO_PAD_CFG);
gpio_direction_output(IMX_GPIO_NR(1, 18), 1);
}
@@ -523,7 +524,7 @@ static void setup_display(void)
writel(reg, &iomux->gpr[3]);
/* Backlight CABEN on LVDS connector */
- SETUP_IOMUX_PAD(PAD_SD2_CLK__GPIO1_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL));
+ SETUP_IOMUX_PAD(PAD_SD2_CLK__GPIO1_IO10 | DIO_PAD_CFG);
gpio_direction_output(IMX_GPIO_NR(1, 10), 0);
}
#endif /* CONFIG_VIDEO_IPUV3 */
@@ -535,118 +536,128 @@ static void setup_display(void)
/* common to add baseboards */
static iomux_v3_cfg_t const gw_gpio_pads[] = {
/* MSATA_EN */
- IOMUX_PADS(PAD_SD4_DAT0__GPIO2_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT0__GPIO2_IO08 | DIO_PAD_CFG),
/* RS232_EN# */
- IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | DIO_PAD_CFG),
};
/* prototype */
static iomux_v3_cfg_t const gwproto_gpio_pads[] = {
/* PANLEDG# */
- IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG),
/* PANLEDR# */
- IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG),
/* LOCLED# */
- IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
/* RS485_EN */
- IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | DIO_PAD_CFG),
/* IOEXP_PWREN# */
- IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG),
/* IOEXP_IRQ# */
- IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)),
/* VID_EN */
- IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG),
/* DIOI2C_DIS# */
- IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG),
/* PCICK_SSON */
- IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20 | DIO_PAD_CFG),
/* PCI_RST# */
- IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG),
};
static iomux_v3_cfg_t const gw51xx_gpio_pads[] = {
/* PANLEDG# */
- IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG),
/* PANLEDR# */
- IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG),
/* IOEXP_PWREN# */
- IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG),
/* IOEXP_IRQ# */
- IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)),
/* GPS_SHDN */
- IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG),
/* VID_PWR */
- IOMUX_PADS(PAD_CSI0_DATA_EN__GPIO5_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_CSI0_DATA_EN__GPIO5_IO20 | DIO_PAD_CFG),
/* PCI_RST# */
- IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | DIO_PAD_CFG),
+ /* PCIESKT_WDIS# */
+ IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG),
};
static iomux_v3_cfg_t const gw52xx_gpio_pads[] = {
/* PANLEDG# */
- IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG),
/* PANLEDR# */
- IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG),
/* IOEXP_PWREN# */
- IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG),
/* IOEXP_IRQ# */
- IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)),
/* MX6_LOCLED# */
- IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
/* GPS_SHDN */
- IOMUX_PADS(PAD_ENET_RXD0__GPIO1_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_ENET_RXD0__GPIO1_IO27 | DIO_PAD_CFG),
/* USBOTG_SEL */
- IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | DIO_PAD_CFG),
/* VID_PWR */
- IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG),
/* PCI_RST# */
- IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG),
+ /* PCIESKT_WDIS# */
+ IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG),
};
static iomux_v3_cfg_t const gw53xx_gpio_pads[] = {
/* PANLEDG# */
- IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG),
/* PANLEDR# */
- IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG),
/* IOEXP_PWREN# */
- IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | DIO_PAD_CFG),
/* IOEXP_IRQ# */
- IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(IRQ_PAD_CTRL)),
+ /* DIOI2C_DIS# */
+ IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG),
/* MX6_LOCLED# */
- IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
/* GPS_SHDN */
- IOMUX_PADS(PAD_ENET_RXD0__GPIO1_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_ENET_RXD0__GPIO1_IO27 | DIO_PAD_CFG),
/* VID_EN */
- IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG),
/* PCI_RST# */
- IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG),
+ /* PCIESKT_WDIS# */
+ IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | DIO_PAD_CFG),
};
static iomux_v3_cfg_t const gw54xx_gpio_pads[] = {
/* PANLEDG# */
- IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | DIO_PAD_CFG),
/* PANLEDR# */
- IOMUX_PADS(PAD_KEY_COL2__GPIO4_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_KEY_COL2__GPIO4_IO10 | DIO_PAD_CFG),
/* MX6_LOCLED# */
- IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | DIO_PAD_CFG),
/* MIPI_DIO */
- IOMUX_PADS(PAD_SD1_DAT3__GPIO1_IO21 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD1_DAT3__GPIO1_IO21 | DIO_PAD_CFG),
/* RS485_EN */
- IOMUX_PADS(PAD_EIM_D24__GPIO3_IO24 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_EIM_D24__GPIO3_IO24 | DIO_PAD_CFG),
/* IOEXP_PWREN# */
- IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | DIO_PAD_CFG),
/* IOEXP_IRQ# */
- IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)),
- /* DIOI2C_DIS# */
- IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(IRQ_PAD_CTRL)),
/* DIOI2C_DIS# */
- IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | DIO_PAD_CFG),
/* PCICK_SSON */
- IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20 | DIO_PAD_CFG),
/* PCI_RST# */
- IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
+ IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | DIO_PAD_CFG),
+ /* VID_EN */
+ IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | DIO_PAD_CFG),
+ /* PCIESKT_WDIS# */
+ IOMUX_PADS(PAD_DISP0_DAT23__GPIO5_IO17 | DIO_PAD_CFG),
};
/*
@@ -677,6 +688,7 @@ struct ventana {
int dioi2c_en;
int pcie_sson;
int usb_sel;
+ int wdis;
};
struct ventana gpio_cfg[] = {
@@ -762,6 +774,7 @@ struct ventana gpio_cfg[] = {
.mezz_irq = IMX_GPIO_NR(2, 18),
.gps_shdn = IMX_GPIO_NR(1, 2),
.vidin_en = IMX_GPIO_NR(5, 20),
+ .wdis = IMX_GPIO_NR(7, 12),
},
/* GW52xx */
@@ -805,6 +818,7 @@ struct ventana gpio_cfg[] = {
.gps_shdn = IMX_GPIO_NR(1, 27),
.vidin_en = IMX_GPIO_NR(3, 31),
.usb_sel = IMX_GPIO_NR(1, 2),
+ .wdis = IMX_GPIO_NR(7, 12),
},
/* GW53xx */
@@ -847,6 +861,7 @@ struct ventana gpio_cfg[] = {
.mezz_irq = IMX_GPIO_NR(2, 18),
.gps_shdn = IMX_GPIO_NR(1, 27),
.vidin_en = IMX_GPIO_NR(3, 31),
+ .wdis = IMX_GPIO_NR(7, 12),
},
/* GW54xx */
@@ -891,6 +906,7 @@ struct ventana gpio_cfg[] = {
.vidin_en = IMX_GPIO_NR(3, 31),
.dioi2c_en = IMX_GPIO_NR(4, 5),
.pcie_sson = IMX_GPIO_NR(1, 20),
+ .wdis = IMX_GPIO_NR(5, 17),
},
};
@@ -902,8 +918,8 @@ int power_init_board(void)
/* configure PFUZE100 PMIC */
if (board_type == GW54xx || board_type == GW54proto) {
- power_pfuze100_init(I2C_PMIC);
- p = pmic_get("PFUZE100_PMIC");
+ power_pfuze100_init(CONFIG_I2C_PMIC);
+ p = pmic_get("PFUZE100");
if (p && !pmic_probe(p)) {
pmic_reg_read(p, PFUZE100_DEVICEID, &reg);
printf("PMIC: PFUZE100 ID=0x%02x\n", reg);
@@ -924,7 +940,7 @@ int power_init_board(void)
/* configure LTC3676 PMIC */
else {
- power_ltc3676_init(I2C_PMIC);
+ power_ltc3676_init(CONFIG_I2C_PMIC);
p = pmic_get("LTC3676_PMIC");
if (p && !pmic_probe(p)) {
puts("PMIC: LTC3676\n");
@@ -975,12 +991,10 @@ static void setup_board_gpio(int board)
gpio_direction_output(GP_MSATA_SEL, 0);
}
- /*
- * assert PCI_RST# (released by OS when clock is valid)
- * TODO: figure out why leaving this de-asserted from PCI scan on boot
- * causes linux pcie driver to hang during enumeration
- */
+#if !defined(CONFIG_CMD_PCI)
+ /* assert PCI_RST# (released by OS when clock is valid) */
gpio_direction_output(gpio_cfg[board].pcie_rst, 0);
+#endif
/* turn off (active-high) user LED's */
for (i = 0; i < 4; i++) {
@@ -1016,21 +1030,27 @@ static void setup_board_gpio(int board)
if (gpio_cfg[board].usb_sel)
gpio_direction_output(gpio_cfg[board].usb_sel, 0);
+ /* PCISKT_WDIS# (Wireless disable GPIO to miniPCIe sockets) */
+ if (gpio_cfg[board].wdis)
+ gpio_direction_output(gpio_cfg[board].wdis, 1);
+
/*
* Configure DIO pinmux/padctl registers
* see IMX6DQRM/IMX6SDLRM IOMUXC_SW_PAD_CTL_PAD_* register definitions
*/
for (i = 0; i < 4; i++) {
struct dio_cfg *cfg = &gpio_cfg[board].dio_cfg[i];
- unsigned ctrl = DIO_PAD_CTRL;
+ iomux_v3_cfg_t ctrl = DIO_PAD_CFG;
unsigned cputype = is_cpu_type(MXC_CPU_MX6Q) ? 0 : 1;
sprintf(arg, "dio%d", i);
if (!hwconfig(arg))
continue;
s = hwconfig_subarg(arg, "padctrl", &len);
- if (s)
- ctrl = simple_strtoul(s, NULL, 16) & 0x3ffff;
+ if (s) {
+ ctrl = MUX_PAD_CTRL(simple_strtoul(s, NULL, 16)
+ & 0x1ffff) | MUX_MODE_SION;
+ }
if (hwconfig_subarg_cmp(arg, "mode", "gpio")) {
if (!quiet) {
printf("DIO%d: GPIO%d_IO%02d (gpio-%d)\n", i,
@@ -1039,7 +1059,7 @@ static void setup_board_gpio(int board)
cfg->gpio_param);
}
imx_iomux_v3_setup_pad(cfg->gpio_padmux[cputype] |
- MUX_PAD_CTRL(ctrl));
+ ctrl);
gpio_direction_input(cfg->gpio_param);
} else if (hwconfig_subarg_cmp("dio2", "mode", "pwm") &&
cfg->pwm_padmux) {
@@ -1122,8 +1142,7 @@ int dram_init(void)
int board_init(void)
{
- struct iomuxc_base_regs *const iomuxc_regs
- = (struct iomuxc_base_regs *)IOMUXC_BASE_ADDR;
+ struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
clrsetbits_le32(&iomuxc_regs->gpr[1],
IOMUXC_GPR1_OTG_ID_MASK,
@@ -1152,7 +1171,7 @@ int board_init(void)
setup_sata();
#endif
/* read Gateworks EEPROM into global struct (used later) */
- board_type = read_eeprom(I2C_GSC, &ventana_info);
+ board_type = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
/* board-specifc GPIO iomux */
SETUP_IOMUX_PADS(gw_gpio_pads);
@@ -1200,7 +1219,7 @@ int checkboard(void)
return 0;
/* Display GSC firmware revision/CRC/status */
- i2c_set_bus_num(I2C_GSC);
+ i2c_set_bus_num(CONFIG_I2C_GSC);
if (!gsc_i2c_read(GSC_SC_ADDR, GSC_SC_FWVER, 1, buf, 1)) {
printf("GSC: v%d", buf[0]);
if (!gsc_i2c_read(GSC_SC_ADDR, GSC_SC_STATUS, 1, buf, 4)) {
@@ -1264,6 +1283,10 @@ int misc_init_r(void)
else if (is_cpu_type(MXC_CPU_MX6DL) ||
is_cpu_type(MXC_CPU_MX6SOLO))
cputype = "imx6dl";
+ if (8 << (ventana_info.nand_flash_size-1) >= 2048)
+ setenv("flash_layout", "large");
+ else
+ setenv("flash_layout", "normal");
memset(str, 0, sizeof(str));
for (i = 0; i < (sizeof(str)-1) && info->model[i]; i++)
str[i] = tolower(info->model[i]);
@@ -1326,7 +1349,7 @@ int misc_init_r(void)
*
* Disable the boot watchdog and display/clear the timeout flag if set
*/
- i2c_set_bus_num(I2C_GSC);
+ i2c_set_bus_num(CONFIG_I2C_GSC);
if (!gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, &reg, 1)) {
reg |= (1 << GSC_SC_CTRL1_WDDIS);
if (gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, &reg, 1))
@@ -1336,7 +1359,7 @@ int misc_init_r(void)
}
if (!gsc_i2c_read(GSC_SC_ADDR, GSC_SC_STATUS, 1, &reg, 1)) {
if (reg & (1 << GSC_SC_IRQ_WATCHDOG)) { /* watchdog timeout */
- puts("GSC boot watchdog timeout detected");
+ puts("GSC boot watchdog timeout detected\n");
reg &= ~(1 << GSC_SC_IRQ_WATCHDOG); /* clear flag */
gsc_i2c_write(GSC_SC_ADDR, GSC_SC_STATUS, 1, &reg, 1);
}
@@ -1347,74 +1370,6 @@ int misc_init_r(void)
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-/* FDT aliases associated with EEPROM config bits */
-const char *fdt_aliases[] = {
- "ethernet0",
- "ethernet1",
- "hdmi_out",
- "ahci0",
- "pcie",
- "ssi0",
- "ssi1",
- "lcd0",
- "lvds0",
- "lvds1",
- "usb0",
- "usb1",
- "mmc0",
- "mmc1",
- "mmc2",
- "mmc3",
- "uart0",
- "uart1",
- "uart2",
- "uart3",
- "uart4",
- "ipu0",
- "ipu1",
- "can0",
- "mipi_dsi",
- "mipi_csi",
- "tzasc0",
- "tzasc1",
- "i2c0",
- "i2c1",
- "i2c2",
- "vpu",
- "csi0",
- "csi1",
- "caam",
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- "spi0",
- "spi1",
- "spi2",
- "spi3",
- "spi4",
- "spi5",
- NULL,
- NULL,
- "pps",
- NULL,
- NULL,
- NULL,
- "hdmi_in",
- "cvbs_out",
- "cvbs_in",
- "nand",
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
-};
-
/*
* called prior to booting kernel or by 'fdt boardsetup' command
*
@@ -1426,8 +1381,8 @@ const char *fdt_aliases[] = {
*/
void ft_board_setup(void *blob, bd_t *bd)
{
- int bit;
struct ventana_board_info *info = &ventana_info;
+ struct ventana_eeprom_config *cfg;
struct node_info nodes[] = {
{ "sst,w25q256", MTD_DEV_TYPE_NOR, }, /* SPI flash */
{ "fsl,imx6q-gpmi-nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */
@@ -1462,9 +1417,17 @@ void ft_board_setup(void *blob, bd_t *bd)
* remove nodes by alias path if EEPROM config tells us the
* peripheral is not loaded on the board.
*/
- for (bit = 0; bit < 64; bit++) {
- if (!test_bit(bit, info->config))
- fdt_del_node_and_alias(blob, fdt_aliases[bit]);
+ if (getenv("fdt_noconfig")) {
+ puts(" Skiping periperhal config (fdt_noconfig defined)\n");
+ return;
+ }
+ cfg = econfig;
+ while (cfg->name) {
+ if (!test_bit(cfg->bit, info->config)) {
+ fdt_del_node_and_alias(blob, cfg->dtalias ?
+ cfg->dtalias : cfg->name);
+ }
+ cfg++;
}
}
#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/gateworks/gw_ventana/ventana_eeprom.h b/board/gateworks/gw_ventana/ventana_eeprom.h
index 5b065be..d64b910 100644
--- a/board/gateworks/gw_ventana/ventana_eeprom.h
+++ b/board/gateworks/gw_ventana/ventana_eeprom.h
@@ -110,8 +110,19 @@ enum {
GW53xx,
GW54xx,
GW_UNKNOWN,
+ GW_BADCRC,
};
+/* config items */
+struct ventana_eeprom_config {
+ const char *name; /* name of item */
+ const char *dtalias; /* name of dt node to remove if not set */
+ int bit; /* bit within config */
+};
+
+extern struct ventana_eeprom_config econfig[];
+extern struct ventana_board_info ventana_info;
+
int read_eeprom(int bus, struct ventana_board_info *);
#endif
generated by cgit v0.10.2 at 2024-10-21 13:24:38 (GMT)