summaryrefslogtreecommitdiff
path: root/board/hymod/bsp.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/hymod/bsp.c')
-rw-r--r--board/hymod/bsp.c174
1 files changed, 125 insertions, 49 deletions
diff --git a/board/hymod/bsp.c b/board/hymod/bsp.c
index 2ceaeb5..02b6421 100644
--- a/board/hymod/bsp.c
+++ b/board/hymod/bsp.c
@@ -20,13 +20,12 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
- * hacked for Hymod FPGA support by Murray.Jensen@cmst.csiro.au, 29-Jan-01
+ * hacked for Hymod FPGA support by Murray.Jensen@csiro.au, 29-Jan-01
*/
#include <common.h>
#include <command.h>
#include <net.h>
-#include <i2c.h>
#include <asm/iopin_8260.h>
#include <cmd_bsp.h>
@@ -74,28 +73,29 @@
* has not worked (wait several ms?)
*/
-int fpga_load (int mezz, uchar * addr, ulong size)
+int
+fpga_load (int mezz, uchar *addr, ulong size)
{
DECLARE_GLOBAL_DATA_PTR;
hymod_conf_t *cp = &gd->bd->bi_hymod_conf;
+ xlx_info_t *fp;
xlx_iopins_t *fpgaio;
volatile uchar *fpgabase;
volatile uint cnt;
uchar *eaddr = addr + size;
int result;
- if (mezz) {
- if (!cp->mezz.mmap[0].prog.exists)
- return (LOAD_FAIL_NOCONF);
- fpgabase = (uchar *) cp->mezz.mmap[0].prog.base;
- fpgaio = &cp->mezz.iopins[0];
- } else {
- if (!cp->main.mmap[0].prog.exists)
- return (LOAD_FAIL_NOCONF);
- fpgabase = (uchar *) cp->main.mmap[0].prog.base;
- fpgaio = &cp->main.iopins[0];
- }
+ if (mezz)
+ fp = &cp->mezz.xlx[0];
+ else
+ fp = &cp->main.xlx[0];
+
+ if (!fp->mmap.prog.exists)
+ return (LOAD_FAIL_NOCONF);
+
+ fpgabase = (uchar *)fp->mmap.prog.base;
+ fpgaio = &fp->iopins;
/* set enable HIGH if required */
if (fpgaio->enable_pin.flag)
@@ -106,7 +106,7 @@ int fpga_load (int mezz, uchar * addr, ulong size)
/* toggle PROG Low then High (will already be Low after Power-On) */
iopin_set_low (&fpgaio->prog_pin);
- udelay (1); /* minimum 300ns - 1usec should do it */
+ udelay (1); /* minimum 300ns - 1usec should do it */
iopin_set_high (&fpgaio->prog_pin);
/* wait for INIT High */
@@ -157,15 +157,15 @@ do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
case 2:
if (strcmp (argv[1], "info") == 0) {
printf ("\nHymod FPGA Info...\n");
- printf (" Address Size\n");
- printf (" Main Configuration: 0x%08x %d\n",
- FPGA_MAIN_CFG_BASE, FPGA_MAIN_CFG_SIZE);
- printf (" Main Register: 0x%08x %d\n",
- FPGA_MAIN_REG_BASE, FPGA_MAIN_REG_SIZE);
- printf (" Main Port: 0x%08x %d\n",
- FPGA_MAIN_PORT_BASE, FPGA_MAIN_PORT_SIZE);
- printf (" Mezz Configuration: 0x%08x %d\n",
- FPGA_MEZZ_CFG_BASE, FPGA_MEZZ_CFG_SIZE);
+ printf ("\t\t\t\tAddress\t\tSize\n");
+ printf ("\tMain Configuration:\t0x%08x\t%d\n",
+ FPGA_MAIN_CFG_BASE, FPGA_MAIN_CFG_SIZE);
+ printf ("\tMain Register:\t\t0x%08x\t%d\n",
+ FPGA_MAIN_REG_BASE, FPGA_MAIN_REG_SIZE);
+ printf ("\tMain Port:\t\t0x%08x\t%d\n",
+ FPGA_MAIN_PORT_BASE, FPGA_MAIN_PORT_SIZE);
+ printf ("\tMezz Configuration:\t0x%08x\t%d\n",
+ FPGA_MEZZ_CFG_BASE, FPGA_MEZZ_CFG_SIZE);
return 0;
}
break;
@@ -176,18 +176,21 @@ do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
save_addr = addr;
#if 0
- /* reading config data unimplemented */
- while VM
- :more config data * addr++ = *fpga;
- result = VM:? ? ?
+ /* fpga readback unimplemented */
+ while (more readback data)
+ *addr++ = *fpga;
+ result = error ? STORE_FAIL_XXX : STORE_SUCCESS;
#else
- result = 0;
+ result = STORE_SUCCESS;
#endif
+
if (result == STORE_SUCCESS) {
- printf ("SUCCEEDED (%d bytes)\n", addr - save_addr);
+ printf ("SUCCEEDED (%d bytes)\n",
+ addr - save_addr);
return 0;
} else
- printf ("FAILED (%d bytes)\n", addr - save_addr);
+ printf ("FAILED (%d bytes)\n",
+ addr - save_addr);
return 1;
}
break;
@@ -196,25 +199,32 @@ do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
if (strcmp (argv[1], "tftp") == 0) {
copy_filename (BootFile, argv[2], sizeof (BootFile));
load_addr = simple_strtoul (argv[3], NULL, 16);
+ NetBootFileXferSize = 0;
if (NetLoop (TFTP) <= 0) {
- printf ("tftp transfer failed - aborting fgpa load\n");
+ printf ("tftp transfer failed - aborting "
+ "fgpa load\n");
return 1;
}
if (NetBootFileXferSize == 0) {
- printf ("can't determine file size - aborting fpga load\n");
+ printf ("can't determine file size - "
+ "aborting fpga load\n");
return 1;
}
- printf ("File transfer succeeded - beginning fpga load...");
+ printf ("File transfer succeeded - "
+ "beginning fpga load...");
result = fpga_load (0, (uchar *) load_addr,
- NetBootFileXferSize);
+ NetBootFileXferSize);
+
if (result == LOAD_SUCCESS) {
printf ("SUCCEEDED\n");
return 0;
- } else if (result == LOAD_FAIL_NOINIT)
+ } else if (result == LOAD_FAIL_NOCONF)
+ printf ("FAILED (no CONF)\n");
+ else if (result == LOAD_FAIL_NOINIT)
printf ("FAILED (no INIT)\n");
else
printf ("FAILED (no DONE)\n");
@@ -231,7 +241,8 @@ do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
else if (strcmp (argv[2], "mezz") == 0)
mezz = 1;
else {
- printf ("FPGA type must be either `main' or `mezz'\n");
+ printf ("FPGA type must be either "
+ "`main' or `mezz'\n");
return 1;
}
arg = 3;
@@ -239,14 +250,18 @@ do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
mezz = 0;
arg = 2;
}
+
addr = (uchar *) simple_strtoul (argv[arg++], NULL, 16);
size = (ulong) simple_strtoul (argv[arg], NULL, 16);
result = fpga_load (mezz, addr, size);
+
if (result == LOAD_SUCCESS) {
printf ("SUCCEEDED\n");
return 0;
- } else if (result == LOAD_FAIL_NOINIT)
+ } else if (result == LOAD_FAIL_NOCONF)
+ printf ("FAILED (no CONF)\n");
+ else if (result == LOAD_FAIL_NOINIT)
printf ("FAILED (no INIT)\n");
else
printf ("FAILED (no DONE)\n");
@@ -267,22 +282,21 @@ int
do_eecl (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
uchar data[HYMOD_EEPROM_SIZE];
- uint offset;
- int rcode = 0;
+ uint addr = CFG_I2C_EEPROM_ADDR;
switch (argc) {
case 1:
- offset = HYMOD_EEOFF_MAIN;
+ addr |= HYMOD_EEOFF_MAIN;
break;
case 2:
if (strcmp (argv[1], "main") == 0) {
- offset = HYMOD_EEOFF_MAIN;
+ addr |= HYMOD_EEOFF_MAIN;
break;
}
if (strcmp (argv[1], "mezz") == 0) {
- offset = HYMOD_EEOFF_MEZZ;
+ addr |= HYMOD_EEOFF_MEZZ;
break;
}
/* fall through ... */
@@ -293,15 +307,77 @@ do_eecl (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
memset (data, 0, HYMOD_EEPROM_SIZE);
- if (i2c_write
- (CFG_I2C_EEPROM_ADDR | offset, 0, CFG_I2C_EEPROM_ADDR_LEN, data,
- HYMOD_EEPROM_SIZE)) {
- rcode = 1;
+
+ eeprom_write (addr, 0, data, HYMOD_EEPROM_SIZE);
+
+ return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if 0
+static uchar test_bitfile[] = {
+ /* one day ... */
+};
+#endif
+
+int
+do_htest (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+#if 0
+ int rc;
+#endif
+#ifdef CONFIG_ETHER_LOOPBACK_TEST
+ extern void eth_loopback_test (void);
+#endif /* CONFIG_ETHER_LOOPBACK_TEST */
+
+ printf ("HYMOD tests - ensure loopbacks etc. are connected\n\n");
+
+#if 0
+ /* Load FPGA with test program */
+
+ printf ("Loading test FPGA program ...");
+
+ rc = fpga_load (0, test_bitfile, sizeof (test_bitfile));
+
+ switch (rc) {
+
+ case LOAD_SUCCESS:
+ printf (" SUCCEEDED\n");
+ break;
+
+ case LOAD_FAIL_NOCONF:
+ printf (" FAILED (no configuration space defined)\n");
+ return 1;
+
+ case LOAD_FAIL_NOINIT:
+ printf (" FAILED (timeout - no INIT signal seen)\n");
+ return 1;
+
+ case LOAD_FAIL_NODONE:
+ printf (" FAILED (timeout - no DONE signal seen)\n");
+ return 1;
+
+ default:
+ printf (" FAILED (unknown return code from fpga_load\n");
+ return 1;
}
- return rcode;
+ /* run Local Bus <=> Xilinx tests */
+
+ /* tell Xilinx to run ZBT Ram, High Speed serial and Mezzanine tests */
+
+ /* run SDRAM test */
+#endif
+
+#ifdef CONFIG_ETHER_LOOPBACK_TEST
+ /* run Ethernet test */
+ eth_loopback_test ();
+#endif /* CONFIG_ETHER_LOOPBACK_TEST */
+
+ return 0;
}
-#endif /* CFG_CMD_BSP */
+#endif /* CFG_CMD_BSP */
/* ------------------------------------------------------------------------- */