summaryrefslogtreecommitdiff
path: root/board/icecube/icecube.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/icecube/icecube.c')
-rw-r--r--board/icecube/icecube.c32
1 files changed, 16 insertions, 16 deletions
diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c
index d84ab3a..7524461 100644
--- a/board/icecube/icecube.c
+++ b/board/icecube/icecube.c
@@ -87,7 +87,7 @@ void lite5200b_wakeup(void)
#define lite5200b_wakeup()
#endif
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
static void sdram_start (int hi_addr)
{
long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -130,7 +130,7 @@ static void sdram_start (int hi_addr)
/*
* ATTENTION: Although partially referenced initdram does NOT make real use
- * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
* is something else than 0x00000000.
*/
@@ -141,7 +141,7 @@ phys_size_t initdram (int board_type)
ulong dramsize2 = 0;
uint svr, pvr;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
ulong test1, test2;
/* setup SDRAM chip selects */
@@ -162,9 +162,9 @@ phys_size_t initdram (int board_type)
/* find RAM size using SDRAM CS0 only */
sdram_start(0);
- test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+ test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
sdram_start(1);
- test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+ test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
if (test1 > test2) {
sdram_start(0);
dramsize = test1;
@@ -190,10 +190,10 @@ phys_size_t initdram (int board_type)
/* find RAM size using SDRAM CS1 only */
if (!dramsize)
sdram_start(0);
- test2 = test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+ test2 = test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
if (!dramsize) {
sdram_start(1);
- test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+ test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
}
if (test1 > test2) {
sdram_start(0);
@@ -215,7 +215,7 @@ phys_size_t initdram (int board_type)
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
}
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
/* retrieve size of memory connected to SDRAM CS0 */
dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
@@ -233,7 +233,7 @@ phys_size_t initdram (int board_type)
dramsize2 = 0;
}
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
/*
* On MPC5200B we need to set the special configuration delay in the
@@ -263,7 +263,7 @@ phys_size_t initdram (int board_type)
phys_size_t initdram (int board_type)
{
ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
ulong test1, test2;
/* setup and enable SDRAM chip selects */
@@ -282,9 +282,9 @@ phys_size_t initdram (int board_type)
/* find RAM size */
sdram_start(0);
- test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+ test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
sdram_start(1);
- test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+ test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
if (test1 > test2) {
sdram_start(0);
dramsize = test1;
@@ -295,12 +295,12 @@ phys_size_t initdram (int board_type)
/* set SDRAM end address according to size */
*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
/* Retrieve amount of SDRAM available */
dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
return dramsize;
}
@@ -340,9 +340,9 @@ void flash_afterinit(ulong size)
{
if (size == 0x800000) { /* adjust mapping */
*(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START =
- START_REG(CFG_BOOTCS_START | size);
+ START_REG(CONFIG_SYS_BOOTCS_START | size);
*(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP =
- STOP_REG(CFG_BOOTCS_START | size, size);
+ STOP_REG(CONFIG_SYS_BOOTCS_START | size, size);
}
}