summaryrefslogtreecommitdiff
path: root/board/ivm/ivm.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/ivm/ivm.c')
-rw-r--r--board/ivm/ivm.c70
1 files changed, 35 insertions, 35 deletions
diff --git a/board/ivm/ivm.c b/board/ivm/ivm.c
index 4882f04..9bec198 100644
--- a/board/ivm/ivm.c
+++ b/board/ivm/ivm.c
@@ -161,28 +161,28 @@ int checkboard (void)
phys_size_t initdram (int board_type)
{
- volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immr->im_memctl;
long int size_b0;
/* enable SDRAM clock ("switch on" SDRAM) */
- immr->im_cpm.cp_pbpar &= ~(CFG_PB_SDRAM_CLKE); /* GPIO */
- immr->im_cpm.cp_pbodr &= ~(CFG_PB_SDRAM_CLKE); /* active output */
- immr->im_cpm.cp_pbdir |= CFG_PB_SDRAM_CLKE; /* output */
- immr->im_cpm.cp_pbdat |= CFG_PB_SDRAM_CLKE; /* assert SDRAM CLKE */
+ immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_SDRAM_CLKE); /* GPIO */
+ immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_SDRAM_CLKE); /* active output */
+ immr->im_cpm.cp_pbdir |= CONFIG_SYS_PB_SDRAM_CLKE; /* output */
+ immr->im_cpm.cp_pbdat |= CONFIG_SYS_PB_SDRAM_CLKE; /* assert SDRAM CLKE */
udelay (1);
/*
* Map controller bank 1 for ELIC SACCO
*/
- memctl->memc_or1 = CFG_OR1;
- memctl->memc_br1 = CFG_BR1;
+ memctl->memc_or1 = CONFIG_SYS_OR1;
+ memctl->memc_br1 = CONFIG_SYS_BR1;
/*
* Map controller bank 2 for ELIC EPIC
*/
- memctl->memc_or2 = CFG_OR2;
- memctl->memc_br2 = CFG_BR2;
+ memctl->memc_or2 = CONFIG_SYS_OR2;
+ memctl->memc_br2 = CONFIG_SYS_BR2;
/*
* Configure UPMA for SHARC
@@ -194,15 +194,15 @@ phys_size_t initdram (int board_type)
/*
* Map controller bank 4 for HDLC Address space
*/
- memctl->memc_or4 = CFG_OR4;
- memctl->memc_br4 = CFG_BR4;
+ memctl->memc_or4 = CONFIG_SYS_OR4;
+ memctl->memc_br4 = CONFIG_SYS_BR4;
#endif
/*
* Map controller bank 5 for SHARC
*/
- memctl->memc_or5 = CFG_OR5;
- memctl->memc_br5 = CFG_BR5;
+ memctl->memc_or5 = CONFIG_SYS_OR5;
+ memctl->memc_br5 = CONFIG_SYS_BR5;
memctl->memc_mamr = 0x00001000;
@@ -212,17 +212,17 @@ phys_size_t initdram (int board_type)
upmconfig (UPMB, (uint *) sdram_table,
sizeof (sdram_table) / sizeof (uint));
- memctl->memc_mptpr = CFG_MPTPR_1BK_8K;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_8K;
memctl->memc_mar = 0x00000088;
/*
* Map controller bank 3 to the SDRAM bank at preliminary address.
*/
- memctl->memc_or3 = CFG_OR3_PRELIM;
- memctl->memc_br3 = CFG_BR3_PRELIM;
+ memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+ memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
- memctl->memc_mbmr = CFG_MBMR_8COL; /* refresh not enabled yet */
+ memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL; /* refresh not enabled yet */
udelay (200);
memctl->memc_mcr = 0x80806105; /* precharge */
@@ -251,10 +251,10 @@ phys_size_t initdram (int board_type)
* Check Bank 0 Memory Size for re-configuration
*/
size_b0 =
- dram_size (CFG_MBMR_8COL, (long *) SDRAM_BASE3_PRELIM,
+ dram_size (CONFIG_SYS_MBMR_8COL, (long *) SDRAM_BASE3_PRELIM,
SDRAM_MAX_SIZE);
- memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE;
+ memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL | MBMR_PTBE;
return (size_b0);
}
@@ -272,7 +272,7 @@ phys_size_t initdram (int board_type)
static long int dram_size (long int mamr_value, long int *base,
long int maxsize)
{
- volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immr->im_memctl;
memctl->memc_mbmr = mamr_value;
@@ -284,13 +284,13 @@ static long int dram_size (long int mamr_value, long int *base,
void reset_phy (void)
{
- immap_t *immr = (immap_t *) CFG_IMMR;
+ immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
/* De-assert Ethernet Powerdown */
- immr->im_cpm.cp_pbpar &= ~(CFG_PB_ETH_POWERDOWN); /* GPIO */
- immr->im_cpm.cp_pbodr &= ~(CFG_PB_ETH_POWERDOWN); /* active output */
- immr->im_cpm.cp_pbdir |= CFG_PB_ETH_POWERDOWN; /* output */
- immr->im_cpm.cp_pbdat &= ~(CFG_PB_ETH_POWERDOWN); /* Enable PHY power */
+ immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_ETH_POWERDOWN); /* GPIO */
+ immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_ETH_POWERDOWN); /* active output */
+ immr->im_cpm.cp_pbdir |= CONFIG_SYS_PB_ETH_POWERDOWN; /* output */
+ immr->im_cpm.cp_pbdat &= ~(CONFIG_SYS_PB_ETH_POWERDOWN); /* Enable PHY power */
udelay (1000);
/*
@@ -302,13 +302,13 @@ void reset_phy (void)
* Note: The RESET pin is high active, but there is an
* inverter on the SPD823TS board...
*/
- immr->im_ioport.iop_pcpar &= ~(CFG_PC_ETH_RESET);
- immr->im_ioport.iop_pcdir |= CFG_PC_ETH_RESET;
+ immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_ETH_RESET);
+ immr->im_ioport.iop_pcdir |= CONFIG_SYS_PC_ETH_RESET;
/* assert RESET signal of PHY */
- immr->im_ioport.iop_pcdat &= ~(CFG_PC_ETH_RESET);
+ immr->im_ioport.iop_pcdat &= ~(CONFIG_SYS_PC_ETH_RESET);
udelay (10);
/* de-assert RESET signal of PHY */
- immr->im_ioport.iop_pcdat |= CFG_PC_ETH_RESET;
+ immr->im_ioport.iop_pcdat |= CONFIG_SYS_PC_ETH_RESET;
udelay (10);
}
@@ -332,21 +332,21 @@ void show_boot_progress (int status)
void ide_set_reset (int on)
{
- volatile immap_t *immr = (immap_t *) CFG_IMMR;
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
/*
* Configure PC for IDE Reset Pin
*/
if (on) { /* assert RESET */
- immr->im_ioport.iop_pcdat &= ~(CFG_PC_IDE_RESET);
+ immr->im_ioport.iop_pcdat &= ~(CONFIG_SYS_PC_IDE_RESET);
} else { /* release RESET */
- immr->im_ioport.iop_pcdat |= CFG_PC_IDE_RESET;
+ immr->im_ioport.iop_pcdat |= CONFIG_SYS_PC_IDE_RESET;
}
/* program port pin as GPIO output */
- immr->im_ioport.iop_pcpar &= ~(CFG_PC_IDE_RESET);
- immr->im_ioport.iop_pcso &= ~(CFG_PC_IDE_RESET);
- immr->im_ioport.iop_pcdir |= CFG_PC_IDE_RESET;
+ immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_IDE_RESET);
+ immr->im_ioport.iop_pcso &= ~(CONFIG_SYS_PC_IDE_RESET);
+ immr->im_ioport.iop_pcdir |= CONFIG_SYS_PC_IDE_RESET;
}
/* ------------------------------------------------------------------------- */