summaryrefslogtreecommitdiff
path: root/board/keymile/common/common.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/keymile/common/common.c')
-rw-r--r--board/keymile/common/common.c71
1 files changed, 6 insertions, 65 deletions
diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c
index 612dd2a..f262306 100644
--- a/board/keymile/common/common.c
+++ b/board/keymile/common/common.c
@@ -39,7 +39,10 @@
#include <i2c.h>
#endif
+#if !defined(CONFIG_MPC83xx)
static void i2c_write_start_seq(void);
+#endif
+
DECLARE_GLOBAL_DATA_PTR;
/*
@@ -89,9 +92,7 @@ int set_km_env(void)
return 0;
}
-#define DELAY_ABORT_SEQ 62 /* @200kHz 9 clocks = 44us, 62us is ok */
-#define DELAY_HALF_PERIOD (500 / (CONFIG_SYS_I2C_SPEED / 1000))
-
+#if defined(CONFIG_SYS_I2C_INIT_BOARD)
#if !defined(CONFIG_MPC83xx)
static void i2c_write_start_seq(void)
{
@@ -171,68 +172,6 @@ int i2c_make_abort(void)
#endif
return ret;
}
-#endif /* !MPC83xx */
-
-#if defined(CONFIG_MPC83xx)
-static void i2c_write_start_seq(void)
-{
- struct fsl_i2c *dev;
- dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET);
- udelay(DELAY_ABORT_SEQ);
- out_8(&dev->cr, (I2C_CR_MEN | I2C_CR_MSTA));
- udelay(DELAY_ABORT_SEQ);
- out_8(&dev->cr, (I2C_CR_MEN));
-}
-
-int i2c_make_abort(void)
-{
- struct fsl_i2c *dev;
- dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET);
- uchar dummy;
- uchar last;
- int nbr_read = 0;
- int i = 0;
- int ret = 0;
-
- /* wait after each operation to finsh with a delay */
- out_8(&dev->cr, (I2C_CR_MSTA));
- udelay(DELAY_ABORT_SEQ);
- out_8(&dev->cr, (I2C_CR_MEN | I2C_CR_MSTA));
- udelay(DELAY_ABORT_SEQ);
- dummy = in_8(&dev->dr);
- udelay(DELAY_ABORT_SEQ);
- last = in_8(&dev->dr);
- nbr_read++;
-
- /*
- * do read until the last bit is 1, but stop if the full eeprom is
- * read.
- */
- while (((last & 0x01) != 0x01) &&
- (nbr_read < CONFIG_SYS_IVM_EEPROM_MAX_LEN)) {
- udelay(DELAY_ABORT_SEQ);
- last = in_8(&dev->dr);
- nbr_read++;
- }
- if ((last & 0x01) != 0x01)
- ret = -2;
- if ((last != 0xff) || (nbr_read > 1))
- printf("[INFO] i2c abort after %d bytes (0x%02x)\n",
- nbr_read, last);
- udelay(DELAY_ABORT_SEQ);
- out_8(&dev->cr, (I2C_CR_MEN));
- udelay(DELAY_ABORT_SEQ);
- /* clear status reg */
- out_8(&dev->sr, 0);
-
- for (i = 0; i < 5; i++)
- i2c_write_start_seq();
- if (ret != 0)
- printf("[ERROR] i2c abort failed after %d bytes (0x%02x)\n",
- nbr_read, last);
-
- return ret;
-}
#endif
/**
@@ -244,6 +183,8 @@ void i2c_init_board(void)
/* Now run the AbortSequence() */
i2c_make_abort();
}
+#endif
+
#if !defined(MACH_TYPE_KM_KIRKWOOD)
int ethernet_present(void)