diff options
Diffstat (limited to 'board/logicpd/imx27lite/lowlevel_init.S')
| -rw-r--r-- | board/logicpd/imx27lite/lowlevel_init.S | 156 |
1 files changed, 0 insertions, 156 deletions
diff --git a/board/logicpd/imx27lite/lowlevel_init.S b/board/logicpd/imx27lite/lowlevel_init.S deleted file mode 100644 index 9cb702f..0000000 --- a/board/logicpd/imx27lite/lowlevel_init.S +++ /dev/null @@ -1,156 +0,0 @@ -/* - * For clock initialization, see chapter 3 of the "MCIMX27 Multimedia - * Applications Processor Reference Manual, Rev. 0.2". - * - * (C) Copyright 2008 Eric Jarrige <eric.jarrige@armadeus.org> - * (C) Copyright 2009 Ilya Yanok <yanok@emcraft.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -#include <config.h> -#include <asm/macro.h> -#include <asm/arch/imx-regs.h> -#include <generated/asm-offsets.h> - -SOC_ESDCTL_BASE_W: .word IMX_ESD_BASE -SOC_SI_ID_REG_W: .word IMX_SYSTEM_CTL_BASE -SDRAM_ESDCFG_T1_W: .word SDRAM_ESDCFG_REGISTER_VAL(0) -SDRAM_ESDCFG_T2_W: .word SDRAM_ESDCFG_REGISTER_VAL(3) -SDRAM_PRECHARGE_CMD_W: .word (ESDCTL_SDE | ESDCTL_SMODE_PRECHARGE | \ - ESDCTL_ROW13 | ESDCTL_COL10) -SDRAM_AUTOREF_CMD_W: .word (ESDCTL_SDE | ESDCTL_SMODE_AUTO_REF | \ - ESDCTL_ROW13 | ESDCTL_COL10) -SDRAM_LOADMODE_CMD_W: .word (ESDCTL_SDE | ESDCTL_SMODE_LOAD_MODE | \ - ESDCTL_ROW13 | ESDCTL_COL10) -SDRAM_NORMAL_CMD_W: .word SDRAM_ESDCTL_REGISTER_VAL - -.macro init_aipi - /* - * setup AIPI1 and AIPI2 - */ - write32 AIPI1_PSR0, AIPI1_PSR0_VAL - write32 AIPI1_PSR1, AIPI1_PSR1_VAL - write32 AIPI2_PSR0, AIPI2_PSR0_VAL - write32 AIPI2_PSR1, AIPI2_PSR1_VAL - -.endm /* init_aipi */ - -.macro init_clock - ldr r0, =CSCR - /* disable MPLL/SPLL first */ - ldr r1, [r0] - bic r1, r1, #(CSCR_MPEN|CSCR_SPEN) - str r1, [r0] - - write32 MPCTL0, MPCTL0_VAL - write32 SPCTL0, SPCTL0_VAL - - write32 CSCR, CSCR_VAL | CSCR_MPLL_RESTART | CSCR_SPLL_RESTART - - /* - * add some delay here - */ - wait_timer 0x1000 - - /* peripheral clock divider */ - write32 PCDR0, PCDR0_VAL - write32 PCDR1, PCDR1_VAL - - /* Configure PCCR0 and PCCR1 */ - write32 PCCR0, PCCR0_VAL - write32 PCCR1, PCCR1_VAL - -.endm /* init_clock */ - -.macro sdram_init - ldr r0, SOC_ESDCTL_BASE_W - mov r2, #PHYS_SDRAM_1 - - /* Do initial reset */ - mov r1, #ESDMISC_MDDR_DL_RST - str r1, [r0, #ESDMISC_ROF] - - /* Hold for more than 200ns */ - wait_timer 0x10000 - - /* Activate LPDDR iface */ - mov r1, #ESDMISC_MDDREN - str r1, [r0, #ESDMISC_ROF] - - /* Check The chip version TO1 or TO2 */ - ldr r1, SOC_SI_ID_REG_W - ldr r1, [r1] - ands r1, r1, #0xF0000000 - /* add Latency on CAS only for TO2 */ - ldreq r1, SDRAM_ESDCFG_T2_W - ldrne r1, SDRAM_ESDCFG_T1_W - str r1, [r0, #ESDCFG0_ROF] - - /* Run initialization sequence */ - ldr r1, SDRAM_PRECHARGE_CMD_W - str r1, [r0, #ESDCTL0_ROF] - ldr r1, [r2, #SDRAM_ALL_VAL] - - ldr r1, SDRAM_AUTOREF_CMD_W - str r1, [r0, #ESDCTL0_ROF] - ldr r1, [r2, #SDRAM_ALL_VAL] - ldr r1, [r2, #SDRAM_ALL_VAL] - - ldr r1, SDRAM_LOADMODE_CMD_W - str r1, [r0, #ESDCTL0_ROF] - ldrb r1, [r2, #SDRAM_MODE_REGISTER_VAL] - add r3, r2, #SDRAM_EXT_MODE_REGISTER_VAL - ldrb r1, [r3] - - ldr r1, SDRAM_NORMAL_CMD_W - str r1, [r0, #ESDCTL0_ROF] - -#if (CONFIG_NR_DRAM_BANKS > 1) - /* 2nd sdram */ - mov r2, #PHYS_SDRAM_2 - - /* Check The chip version TO1 or TO2 */ - ldr r1, SOC_SI_ID_REG_W - ldr r1, [r1] - ands r1, r1, #0xF0000000 - /* add Latency on CAS only for TO2 */ - ldreq r1, SDRAM_ESDCFG_T2_W - ldrne r1, SDRAM_ESDCFG_T1_W - str r1, [r0, #ESDCFG1_ROF] - - /* Run initialization sequence */ - ldr r1, SDRAM_PRECHARGE_CMD_W - str r1, [r0, #ESDCTL1_ROF] - ldr r1, [r2, #SDRAM_ALL_VAL] - - ldr r1, SDRAM_AUTOREF_CMD_W - str r1, [r0, #ESDCTL1_ROF] - ldr r1, [r2, #SDRAM_ALL_VAL] - ldr r1, [r2, #SDRAM_ALL_VAL] - - ldr r1, SDRAM_LOADMODE_CMD_W - str r1, [r0, #ESDCTL1_ROF] - ldrb r1, [r2, #SDRAM_MODE_REGISTER_VAL] - add r3, r2, #SDRAM_EXT_MODE_REGISTER_VAL - ldrb r1, [r3] - - ldr r1, SDRAM_NORMAL_CMD_W - str r1, [r0, #ESDCTL1_ROF] -#endif /* CONFIG_NR_DRAM_BANKS > 1 */ - -.endm /* sdram_init */ - -.globl lowlevel_init -lowlevel_init: - - mov r10, lr - - init_aipi - - init_clock - - sdram_init - - mov pc,r10 |