summaryrefslogtreecommitdiff
path: root/board/lwmon5/sdram.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/lwmon5/sdram.c')
-rw-r--r--board/lwmon5/sdram.c245
1 files changed, 245 insertions, 0 deletions
diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c
new file mode 100644
index 0000000..bcb3449
--- /dev/null
+++ b/board/lwmon5/sdram.c
@@ -0,0 +1,245 @@
+/*
+ * (C) Copyright 2006
+ * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
+ *
+ * (C) Copyright 2007-2013
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/io.h>
+#include <asm/cache.h>
+#include <asm/ppc440.h>
+#include <watchdog.h>
+
+/*
+ * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
+ * region. Right now the cache should still be disabled in U-Boot because of the
+ * EMAC driver, that need it's buffer descriptor to be located in non cached
+ * memory.
+ *
+ * If at some time this restriction doesn't apply anymore, just define
+ * CONFIG_4xx_DCACHE in the board config file and this code should setup
+ * everything correctly.
+ */
+#ifdef CONFIG_4xx_DCACHE
+#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */
+#else
+#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
+#endif
+
+/*-----------------------------------------------------------------------------+
+ * Prototypes
+ *-----------------------------------------------------------------------------*/
+extern int denali_wait_for_dlllock(void);
+extern void denali_core_search_data_eye(void);
+extern void dcbz_area(u32 start_address, u32 num_bytes);
+
+static u32 is_ecc_enabled(void)
+{
+ u32 val;
+
+ mfsdram(DDR0_22, val);
+ val &= DDR0_22_CTRL_RAW_MASK;
+ if (val)
+ return 1;
+ else
+ return 0;
+}
+
+void board_add_ram_info(int use_default)
+{
+ PPC4xx_SYS_INFO board_cfg;
+ u32 val;
+
+ if (is_ecc_enabled())
+ puts(" (ECC");
+ else
+ puts(" (ECC not");
+
+ get_sys_info(&board_cfg);
+ printf(" enabled, %ld MHz", (board_cfg.freqPLB * 2) / 1000000);
+
+ mfsdram(DDR0_03, val);
+ val = DDR0_03_CASLAT_DECODE(val);
+ printf(", CL%d)", val);
+}
+
+#ifdef CONFIG_DDR_ECC
+static void wait_ddr_idle(void)
+{
+ /*
+ * Controller idle status cannot be determined for Denali
+ * DDR2 code. Just return here.
+ */
+}
+
+static void program_ecc(u32 start_address,
+ u32 num_bytes,
+ u32 tlb_word2_i_value)
+{
+ u32 val;
+ u32 current_addr = start_address;
+ u32 size;
+ int bytes_remaining;
+
+ sync();
+ wait_ddr_idle();
+
+ /*
+ * Because of 440EPx errata CHIP 11, we don't touch the last 256
+ * bytes of SDRAM.
+ */
+ bytes_remaining = num_bytes - CONFIG_SYS_MEM_TOP_HIDE;
+
+ /*
+ * We have to write the ECC bytes by zeroing and flushing in smaller
+ * steps, since the whole 256MByte takes too long for the external
+ * watchdog.
+ */
+ while (bytes_remaining > 0) {
+ size = min((64 << 20), bytes_remaining);
+
+ /* Write zero's to SDRAM */
+ dcbz_area(current_addr, size);
+
+ /* Write modified dcache lines back to memory */
+ clean_dcache_range(current_addr, current_addr + size);
+
+ current_addr += 64 << 20;
+ bytes_remaining -= 64 << 20;
+ WATCHDOG_RESET();
+ }
+
+ sync();
+ wait_ddr_idle();
+
+ /* Clear error status */
+ mfsdram(DDR0_00, val);
+ mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL);
+
+ /* Set 'int_mask' parameter to functionnal value */
+ mfsdram(DDR0_01, val);
+ mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) | DDR0_01_INT_MASK_ALL_OFF));
+
+ sync();
+ wait_ddr_idle();
+}
+#endif
+
+/*************************************************************************
+ *
+ * initdram -- 440EPx's DDR controller is a DENALI Core
+ *
+ ************************************************************************/
+phys_size_t initdram (int board_type)
+{
+ /* CL=4 */
+ mtsdram(DDR0_02, 0x00000000);
+
+ mtsdram(DDR0_00, 0x0000190A);
+ mtsdram(DDR0_01, 0x01000000);
+ mtsdram(DDR0_03, 0x02040803); /* A suitable burst length was taken. CAS is right for our board */
+
+ mtsdram(DDR0_04, 0x0B030300);
+ mtsdram(DDR0_05, 0x02020308);
+ mtsdram(DDR0_06, 0x0003C812);
+ mtsdram(DDR0_07, 0x00090100);
+ mtsdram(DDR0_08, 0x03c80001);
+ mtsdram(DDR0_09, 0x00011D5F);
+ mtsdram(DDR0_10, 0x00000100);
+ mtsdram(DDR0_11, 0x000CC800);
+ mtsdram(DDR0_12, 0x00000003);
+ mtsdram(DDR0_14, 0x00000000);
+ mtsdram(DDR0_17, 0x1e000000);
+ mtsdram(DDR0_18, 0x1e1e1e1e);
+ mtsdram(DDR0_19, 0x1e1e1e1e);
+ mtsdram(DDR0_20, 0x0B0B0B0B);
+ mtsdram(DDR0_21, 0x0B0B0B0B);
+#ifdef CONFIG_DDR_ECC
+ mtsdram(DDR0_22, 0x00267F0B | DDR0_22_CTRL_RAW_ECC_ENABLE); /* enable ECC */
+#else
+ mtsdram(DDR0_22, 0x00267F0B);
+#endif
+
+ mtsdram(DDR0_23, 0x01000000);
+ mtsdram(DDR0_24, 0x01010001);
+
+ mtsdram(DDR0_26, 0x2D93028A);
+ mtsdram(DDR0_27, 0x0784682B);
+
+ mtsdram(DDR0_28, 0x00000080);
+ mtsdram(DDR0_31, 0x00000000);
+ mtsdram(DDR0_42, 0x01000008);
+
+ mtsdram(DDR0_43, 0x050A0200);
+ mtsdram(DDR0_44, 0x00000005);
+ mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */
+
+ denali_wait_for_dlllock();
+
+#if defined(CONFIG_DDR_DATA_EYE)
+ /* -----------------------------------------------------------+
+ * Perform data eye search if requested.
+ * ----------------------------------------------------------*/
+ program_tlb(0, CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20,
+ TLB_WORD2_I_ENABLE);
+ denali_core_search_data_eye();
+ remove_tlb(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20);
+#endif
+
+ /*
+ * Program tlb entries for this size (dynamic)
+ */
+ program_tlb(0, CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20,
+ MY_TLB_WORD2_I_ENABLE);
+
+#if defined(CONFIG_DDR_ECC)
+#if defined(CONFIG_4xx_DCACHE)
+ /*
+ * If ECC is enabled, initialize the parity bits.
+ */
+ program_ecc(0, CONFIG_SYS_MBYTES_SDRAM << 20, 0);
+#else /* CONFIG_4xx_DCACHE */
+ /*
+ * Setup 2nd TLB with same physical address but different virtual address
+ * with cache enabled. This is done for fast ECC generation.
+ */
+ program_tlb(0, CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20, 0);
+
+ /*
+ * If ECC is enabled, initialize the parity bits.
+ */
+ program_ecc(CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20, 0);
+
+ /*
+ * Now after initialization (auto-calibration and ECC generation)
+ * remove the TLB entries with caches enabled and program again with
+ * desired cache functionality
+ */
+ remove_tlb(CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20);
+#endif /* CONFIG_4xx_DCACHE */
+#endif /* CONFIG_DDR_ECC */
+
+ /*
+ * Clear possible errors resulting from data-eye-search.
+ * If not done, then we could get an interrupt later on when
+ * exceptions are enabled.
+ */
+ set_mcsr(get_mcsr());
+
+ return (CONFIG_SYS_MBYTES_SDRAM << 20);
+}