summaryrefslogtreecommitdiff
path: root/board/lwmon5/sdram.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/lwmon5/sdram.c')
-rw-r--r--board/lwmon5/sdram.c18
1 files changed, 9 insertions, 9 deletions
diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c
index 189e824..72968d7 100644
--- a/board/lwmon5/sdram.c
+++ b/board/lwmon5/sdram.c
@@ -45,10 +45,10 @@
* memory.
*
* If at some time this restriction doesn't apply anymore, just define
- * CFG_ENABLE_SDRAM_CACHE in the board config file and this code should setup
+ * CONFIG_SYS_ENABLE_SDRAM_CACHE in the board config file and this code should setup
* everything correctly.
*/
-#ifdef CFG_ENABLE_SDRAM_CACHE
+#ifdef CONFIG_SYS_ENABLE_SDRAM_CACHE
#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */
#else
#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
@@ -116,7 +116,7 @@ static void program_ecc(u32 start_address,
* Because of 440EPx errata CHIP 11, we don't touch the last 256
* bytes of SDRAM.
*/
- bytes_remaining = num_bytes - CFG_MEM_TOP_HIDE;
+ bytes_remaining = num_bytes - CONFIG_SYS_MEM_TOP_HIDE;
/*
* We have to write the ECC bytes by zeroing and flushing in smaller
@@ -252,29 +252,29 @@ phys_size_t initdram (int board_type)
/* -----------------------------------------------------------+
* Perform data eye search if requested.
* ----------------------------------------------------------*/
- program_tlb(0, CFG_SDRAM_BASE, CFG_MBYTES_SDRAM << 20,
+ program_tlb(0, CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20,
TLB_WORD2_I_ENABLE);
denali_core_search_data_eye();
- remove_tlb(CFG_SDRAM_BASE, CFG_MBYTES_SDRAM << 20);
+ remove_tlb(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20);
#endif
/*
* Program tlb entries for this size (dynamic)
*/
- program_tlb(0, CFG_SDRAM_BASE, CFG_MBYTES_SDRAM << 20,
+ program_tlb(0, CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20,
MY_TLB_WORD2_I_ENABLE);
/*
* Setup 2nd TLB with same physical address but different virtual address
* with cache enabled. This is done for fast ECC generation.
*/
- program_tlb(0, CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20, 0);
+ program_tlb(0, CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20, 0);
#ifdef CONFIG_DDR_ECC
/*
* If ECC is enabled, initialize the parity bits.
*/
- program_ecc(CFG_DDR_CACHED_ADDR, CFG_MBYTES_SDRAM << 20, 0);
+ program_ecc(CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20, 0);
#endif
/*
@@ -284,5 +284,5 @@ phys_size_t initdram (int board_type)
*/
set_mcsr(get_mcsr());
- return (CFG_MBYTES_SDRAM << 20);
+ return (CONFIG_SYS_MBYTES_SDRAM << 20);
}