summaryrefslogtreecommitdiff
path: root/board/mbx8xx/csr.h
diff options
context:
space:
mode:
Diffstat (limited to 'board/mbx8xx/csr.h')
-rw-r--r--board/mbx8xx/csr.h60
1 files changed, 60 insertions, 0 deletions
diff --git a/board/mbx8xx/csr.h b/board/mbx8xx/csr.h
new file mode 100644
index 0000000..832e924
--- /dev/null
+++ b/board/mbx8xx/csr.h
@@ -0,0 +1,60 @@
+#ifndef __csr_h
+#define __csr_h
+
+/*
+ * (C) Copyright 2000
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * Control and Status Register definitions for the MBX
+ *
+ *--------------------------------------------------------------------
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* bits for control register #1 / status register #1 */
+#define CSR1_ETEN 0x80 /* Ethernet Transceiver Enabled */
+#define CSR1_ELEN 0x40 /* Ethernet XCVR in Internal Loopback */
+#define CSR1_EAEN 0x20 /* Auto selection TP/AUI Enabled */
+#define CSR1_TPEN 0x10 /* TP manually selected */
+#define CSR1_FDDIS 0x08 /* Full Duplex Mode disabled */
+#define CSR1_FCTEN 0x04 /* Collision Testing of XCVR disabled */
+#define CSR1_COM1EN 0x02 /* COM1 signals routed to RS232 Transceiver */
+#define CSR1_XCVRDIS 0x01 /* Onboard RS232 Transceiver Disabled */
+
+/* bits for control register #2 */
+#define CR2_VDDSEL 0xC0 /* PCMCIA Supply Voltage */
+#define CR2_VPPSEL 0x30 /* PCMCIA Programming Voltage */
+#define CR2_BRDFAIL 0x08 /* Board fail */
+#define CR2_SWS1 0x04 /* Software Status #2 LED */
+#define CR2_SWS2 0x02 /* Software Status #2 LED */
+#define CR2_QSPANRST 0x01 /* Reset QSPAN */
+
+/* bits for status register #2 */
+#define SR2_VDDSEL 0xC0 /* PCMCIA Supply Voltage */
+#define SR2_VPPSEL 0x30 /* PCMCIA Programming Voltage */
+#define SR2_BATGD 0x08 /* Low Voltage indication for onboard bat */
+#define SR2_NVBATGD 0x04 /* Low Voltage indication for NVRAM */
+#define SR2_RDY 0x02 /* Flash programming status bit */
+#define SR2_FT 0x01 /* Reserved for Factory test purposes */
+
+#define MBX_CSR1 (*((uchar *)CFG_CSR_BASE))
+#define MBX_CSR2 (*((uchar *)CFG_CSR_BASE + 1))
+
+#endif /* __csr_h */