summaryrefslogtreecommitdiff
path: root/board/mpl/pip405/pip405.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/mpl/pip405/pip405.c')
-rw-r--r--board/mpl/pip405/pip405.c947
1 files changed, 947 insertions, 0 deletions
diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c
new file mode 100644
index 0000000..87ca6ef
--- /dev/null
+++ b/board/mpl/pip405/pip405.c
@@ -0,0 +1,947 @@
+/*
+ * (C) Copyright 2001
+ * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ * TODO: clean-up
+ */
+
+#include <common.h>
+#include "pip405.h"
+#include <asm/processor.h>
+#include <i2c.h>
+#include "../common/isa.h"
+#include "../common/common_util.h"
+
+#undef SDRAM_DEBUG
+
+#define FALSE 0
+#define TRUE 1
+
+/* stdlib.h causes some compatibility problems; should fixe these! -- wd */
+#ifndef __ldiv_t_defined
+typedef struct {
+ long int quot; /* Quotient */
+ long int rem; /* Remainder */
+} ldiv_t;
+extern ldiv_t ldiv (long int __numer, long int __denom);
+
+# define __ldiv_t_defined 1
+#endif
+
+
+typedef enum {
+ SDRAM_NO_ERR,
+ SDRAM_SPD_COMM_ERR,
+ SDRAM_SPD_CHKSUM_ERR,
+ SDRAM_UNSUPPORTED_ERR,
+ SDRAM_UNKNOWN_ERR
+} SDRAM_ERR;
+
+typedef struct {
+ const unsigned char mode;
+ const unsigned char row;
+ const unsigned char col;
+ const unsigned char bank;
+} SDRAM_SETUP;
+
+static const SDRAM_SETUP sdram_setup_table[] = {
+ {1, 11, 9, 2},
+ {1, 11, 10, 2},
+ {2, 12, 9, 4},
+ {2, 12, 10, 4},
+ {3, 13, 9, 4},
+ {3, 13, 10, 4},
+ {3, 13, 11, 4},
+ {4, 12, 8, 2},
+ {4, 12, 8, 4},
+ {5, 11, 8, 2},
+ {5, 11, 8, 4},
+ {6, 13, 8, 2},
+ {6, 13, 8, 4},
+ {7, 13, 9, 2},
+ {7, 13, 10, 2},
+ {0, 0, 0, 0}
+};
+
+static const unsigned char cal_indextable[] = {
+ 9, 23, 25
+};
+
+
+/*
+ * translate ns.ns/10 coding of SPD timing values
+ * into 10 ps unit values
+ */
+
+unsigned short NS10to10PS (unsigned char spd_byte, unsigned char spd_version)
+{
+ unsigned short ns, ns10;
+
+ /* isolate upper nibble */
+ ns = (spd_byte >> 4) & 0x0F;
+ /* isolate lower nibble */
+ ns10 = (spd_byte & 0x0F);
+
+ return (ns * 100 + ns10 * 10);
+}
+
+/*
+ * translate ns.ns/4 coding of SPD timing values
+ * into 10 ps unit values
+ */
+
+unsigned short NS4to10PS (unsigned char spd_byte, unsigned char spd_version)
+{
+ unsigned short ns, ns4;
+
+ /* isolate upper 6 bits */
+ ns = (spd_byte >> 2) & 0x3F;
+ /* isloate lower 2 bits */
+ ns4 = (spd_byte & 0x03);
+
+ return (ns * 100 + ns4 * 25);
+}
+
+/*
+ * translate ns coding of SPD timing values
+ * into 10 ps unit values
+ */
+
+unsigned short NSto10PS (unsigned char spd_byte)
+{
+ return (spd_byte * 100);
+}
+
+void SDRAM_err (const char *s)
+{
+#ifndef SDRAM_DEBUG
+ DECLARE_GLOBAL_DATA_PTR;
+
+ (void) get_clocks ();
+ gd->baudrate = 9600;
+ serial_init ();
+#endif
+ serial_puts ("\n");
+ serial_puts (s);
+ serial_puts ("\n enable SDRAM_DEBUG for more info\n");
+ for (;;);
+}
+
+
+#ifdef SDRAM_DEBUG
+
+void write_hex (unsigned char i)
+{
+ char cc;
+
+ cc = i >> 4;
+ cc &= 0xf;
+ if (cc > 9)
+ serial_putc (cc + 55);
+ else
+ serial_putc (cc + 48);
+ cc = i & 0xf;
+ if (cc > 9)
+ serial_putc (cc + 55);
+ else
+ serial_putc (cc + 48);
+}
+
+void write_4hex (unsigned long val)
+{
+ write_hex ((unsigned char) (val >> 24));
+ write_hex ((unsigned char) (val >> 16));
+ write_hex ((unsigned char) (val >> 8));
+ write_hex ((unsigned char) val);
+}
+
+#endif
+
+int board_pre_init (void)
+{
+ unsigned char dataout[1];
+ unsigned char datain[128];
+ unsigned long sdram_size;
+ SDRAM_SETUP *t = (SDRAM_SETUP *) sdram_setup_table;
+ unsigned long memclk;
+ unsigned long tmemclk = 0;
+ unsigned long tmp, bank, baseaddr, bank_size;
+ unsigned short i;
+ unsigned char rows, cols, banks, sdram_banks, density;
+ unsigned char supported_cal, trp_clocks, trcd_clocks, tras_clocks,
+ trc_clocks, tctp_clocks;
+ unsigned char cal_index, cal_val, spd_version, spd_chksum;
+ unsigned char buf[8];
+#ifdef SDRAM_DEBUG
+ DECLARE_GLOBAL_DATA_PTR;
+#endif
+
+ memclk = get_bus_freq (tmemclk);
+ tmemclk = 1000000000 / (memclk / 100); /* in 10 ps units */
+
+#ifdef SDRAM_DEBUG
+ (void) get_clocks ();
+ gd->baudrate = 9600;
+ serial_init ();
+ serial_puts ("\nstart SDRAM Setup\n");
+#endif
+
+ /* Read Serial Presence Detect Information */
+ i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ dataout[0] = 0;
+ for (i = 0; i < 128; i++)
+ datain[i] = 127;
+ i2c_read(SPD_EEPROM_ADDRESS,0,1,datain,128);
+#ifdef SDRAM_DEBUG
+ serial_puts ("\ni2c_read returns ");
+ write_hex (i);
+ serial_puts ("\n");
+#endif
+
+#ifdef SDRAM_DEBUG
+ for (i = 0; i < 128; i++) {
+ write_hex (datain[i]);
+ serial_puts (" ");
+ if (((i + 1) % 16) == 0)
+ serial_puts ("\n");
+ }
+ serial_puts ("\n");
+#endif
+ spd_chksum = 0;
+ for (i = 0; i < 63; i++) {
+ spd_chksum += datain[i];
+ } /* endfor */
+ if (datain[63] != spd_chksum) {
+#ifdef SDRAM_DEBUG
+ serial_puts ("SPD chksum: 0x");
+ write_hex (datain[63]);
+ serial_puts (" != calc. chksum: 0x");
+ write_hex (spd_chksum);
+ serial_puts ("\n");
+#endif
+ SDRAM_err ("SPD checksum Error");
+ }
+ /* SPD seems to be ok, use it */
+
+ /* get SPD version */
+ spd_version = datain[62];
+
+ /* do some sanity checks on the kind of RAM */
+ if ((datain[0] < 0x80) || /* less than 128 valid bytes in SPD */
+ (datain[2] != 0x04) || /* if not SDRAM */
+ (!((datain[6] == 0x40) || (datain[6] == 0x48))) || /* or not (64 Bit or 72 Bit) */
+ (datain[7] != 0x00) || (datain[8] != 0x01) || /* or not LVTTL signal levels */
+ (datain[126] == 0x66)) /* or a 66Mhz modules */
+ SDRAM_err ("unsupported SDRAM");
+#ifdef SDRAM_DEBUG
+ serial_puts ("SDRAM sanity ok\n");
+#endif
+
+ /* get number of rows/cols/banks out of byte 3+4+5 */
+ rows = datain[3];
+ cols = datain[4];
+ banks = datain[5];
+
+ /* get number of SDRAM banks out of byte 17 and
+ supported CAS latencies out of byte 18 */
+ sdram_banks = datain[17];
+ supported_cal = datain[18] & ~0x81;
+
+ while (t->mode != 0) {
+ if ((t->row == rows) && (t->col == cols)
+ && (t->bank == sdram_banks))
+ break;
+ t++;
+ } /* endwhile */
+
+#ifdef SDRAM_DEBUG
+ serial_puts ("rows: ");
+ write_hex (rows);
+ serial_puts (" cols: ");
+ write_hex (cols);
+ serial_puts (" banks: ");
+ write_hex (banks);
+ serial_puts (" mode: ");
+ write_hex (t->mode);
+ serial_puts ("\n");
+#endif
+ if (t->mode == 0)
+ SDRAM_err ("unsupported SDRAM");
+ /* get tRP, tRCD, tRAS and density from byte 27+29+30+31 */
+#ifdef SDRAM_DEBUG
+ serial_puts ("tRP: ");
+ write_hex (datain[27]);
+ serial_puts ("\ntRCD: ");
+ write_hex (datain[29]);
+ serial_puts ("\ntRAS: ");
+ write_hex (datain[30]);
+ serial_puts ("\n");
+#endif
+
+ trp_clocks = (NSto10PS (datain[27]) + (tmemclk - 1)) / tmemclk;
+ trcd_clocks = (NSto10PS (datain[29]) + (tmemclk - 1)) / tmemclk;
+ tras_clocks = (NSto10PS (datain[30]) + (tmemclk - 1)) / tmemclk;
+ density = datain[31];
+
+ /* trc_clocks is sum of trp_clocks + tras_clocks */
+ trc_clocks = trp_clocks + tras_clocks;
+ /* ctp = ((trp + tras) - trp - trcd) => tras - trcd */
+ tctp_clocks =
+ ((NSto10PS (datain[30]) - NSto10PS (datain[29])) +
+ (tmemclk - 1)) / tmemclk;
+
+#ifdef SDRAM_DEBUG
+ serial_puts ("c_RP: ");
+ write_hex (trp_clocks);
+ serial_puts ("\nc_RCD: ");
+ write_hex (trcd_clocks);
+ serial_puts ("\nc_RAS: ");
+ write_hex (tras_clocks);
+ serial_puts ("\nc_RC: (RP+RAS): ");
+ write_hex (trc_clocks);
+ serial_puts ("\nc_CTP: ((RP+RAS)-RP-RCD): ");
+ write_hex (tctp_clocks);
+ serial_puts ("\nt_CTP: RAS - RCD: ");
+ write_hex ((unsigned
+ char) ((NSto10PS (datain[30]) -
+ NSto10PS (datain[29])) >> 8));
+ write_hex ((unsigned char) (NSto10PS (datain[30]) - NSto10PS (datain[29])));
+ serial_puts ("\ntmemclk: ");
+ write_hex ((unsigned char) (tmemclk >> 8));
+ write_hex ((unsigned char) (tmemclk));
+ serial_puts ("\n");
+#endif
+
+
+ cal_val = 255;
+ for (i = 6, cal_index = 0; (i > 0) && (cal_index < 3); i--) {
+ /* is this CAS latency supported ? */
+ if ((supported_cal >> i) & 0x01) {
+ buf[0] = datain[cal_indextable[cal_index]];
+ if (cal_index < 2) {
+ if (NS10to10PS (buf[0], spd_version) <= tmemclk)
+ cal_val = i;
+ } else {
+ /* SPD bytes 25+26 have another format */
+ if (NS4to10PS (buf[0], spd_version) <= tmemclk)
+ cal_val = i;
+ } /* endif */
+ cal_index++;
+ } /* endif */
+ } /* endfor */
+#ifdef SDRAM_DEBUG
+ serial_puts ("CAL: ");
+ write_hex (cal_val + 1);
+ serial_puts ("\n");
+#endif
+
+ if (cal_val == 255)
+ SDRAM_err ("unsupported SDRAM");
+
+ /* get SDRAM timing register */
+ mtdcr (memcfga, mem_sdtr1);
+ tmp = mfdcr (memcfgd) & ~0x018FC01F;
+ /* insert CASL value */
+/* tmp |= ((unsigned long)cal_val) << 23; */
+ tmp |= ((unsigned long) cal_val) << 23;
+ /* insert PTA value */
+ tmp |= ((unsigned long) (trp_clocks - 1)) << 18;
+ /* insert CTP value */
+/* tmp |= ((unsigned long)(trc_clocks - trp_clocks - trcd_clocks - 1)) << 16; */
+ tmp |= ((unsigned long) (trc_clocks - trp_clocks - trcd_clocks)) << 16;
+ /* insert LDF (always 01) */
+ tmp |= ((unsigned long) 0x01) << 14;
+ /* insert RFTA value */
+ tmp |= ((unsigned long) (trc_clocks - 4)) << 2;
+ /* insert RCD value */
+ tmp |= ((unsigned long) (trcd_clocks - 1)) << 0;
+
+#ifdef SDRAM_DEBUG
+ serial_puts ("sdtr: ");
+ write_4hex (tmp);
+ serial_puts ("\n");
+#endif
+
+ /* write SDRAM timing register */
+ mtdcr (memcfga, mem_sdtr1);
+ mtdcr (memcfgd, tmp);
+ baseaddr = CFG_SDRAM_BASE;
+ bank_size = (((unsigned long) density) << 22) / 2;
+ /* insert AM value */
+ tmp = ((unsigned long) t->mode - 1) << 13;
+ /* insert SZ value; */
+ switch (bank_size) {
+ case 0x00400000:
+ tmp |= ((unsigned long) 0x00) << 17;
+ break;
+ case 0x00800000:
+ tmp |= ((unsigned long) 0x01) << 17;
+ break;
+ case 0x01000000:
+ tmp |= ((unsigned long) 0x02) << 17;
+ break;
+ case 0x02000000:
+ tmp |= ((unsigned long) 0x03) << 17;
+ break;
+ case 0x04000000:
+ tmp |= ((unsigned long) 0x04) << 17;
+ break;
+ case 0x08000000:
+ tmp |= ((unsigned long) 0x05) << 17;
+ break;
+ case 0x10000000:
+ tmp |= ((unsigned long) 0x06) << 17;
+ break;
+ default:
+ SDRAM_err ("unsupported SDRAM");
+ } /* endswitch */
+ /* get SDRAM bank 0 register */
+ mtdcr (memcfga, mem_mb0cf);
+ bank = mfdcr (memcfgd) & ~0xFFCEE001;
+ bank |= (baseaddr | tmp | 0x01);
+#ifdef SDRAM_DEBUG
+ serial_puts ("bank0: baseaddr: ");
+ write_4hex (baseaddr);
+ serial_puts (" banksize: ");
+ write_4hex (bank_size);
+ serial_puts (" mb0cf: ");
+ write_4hex (bank);
+ serial_puts ("\n");
+#endif
+ baseaddr += bank_size;
+ sdram_size += bank_size;
+
+ /* write SDRAM bank 0 register */
+ mtdcr (memcfga, mem_mb0cf);
+ mtdcr (memcfgd, bank);
+
+ /* get SDRAM bank 1 register */
+ mtdcr (memcfga, mem_mb1cf);
+ bank = mfdcr (memcfgd) & ~0xFFCEE001;
+ sdram_size = 0;
+
+#ifdef SDRAM_DEBUG
+ serial_puts ("bank1: baseaddr: ");
+ write_4hex (baseaddr);
+ serial_puts (" banksize: ");
+ write_4hex (bank_size);
+#endif
+ if (banks == 2) {
+ bank |= (baseaddr | tmp | 0x01);
+ baseaddr += bank_size;
+ sdram_size += bank_size;
+ } /* endif */
+#ifdef SDRAM_DEBUG
+ serial_puts (" mb1cf: ");
+ write_4hex (bank);
+ serial_puts ("\n");
+#endif
+ /* write SDRAM bank 1 register */
+ mtdcr (memcfga, mem_mb1cf);
+ mtdcr (memcfgd, bank);
+
+ /* get SDRAM bank 2 register */
+ mtdcr (memcfga, mem_mb2cf);
+ bank = mfdcr (memcfgd) & ~0xFFCEE001;
+
+ bank |= (baseaddr | tmp | 0x01);
+
+#ifdef SDRAM_DEBUG
+ serial_puts ("bank2: baseaddr: ");
+ write_4hex (baseaddr);
+ serial_puts (" banksize: ");
+ write_4hex (bank_size);
+ serial_puts (" mb2cf: ");
+ write_4hex (bank);
+ serial_puts ("\n");
+#endif
+
+ baseaddr += bank_size;
+ sdram_size += bank_size;
+
+ /* write SDRAM bank 2 register */
+ mtdcr (memcfga, mem_mb2cf);
+ mtdcr (memcfgd, bank);
+
+ /* get SDRAM bank 3 register */
+ mtdcr (memcfga, mem_mb3cf);
+ bank = mfdcr (memcfgd) & ~0xFFCEE001;
+
+#ifdef SDRAM_DEBUG
+ serial_puts ("bank3: baseaddr: ");
+ write_4hex (baseaddr);
+ serial_puts (" banksize: ");
+ write_4hex (bank_size);
+#endif
+
+ if (banks == 2) {
+ bank |= (baseaddr | tmp | 0x01);
+ baseaddr += bank_size;
+ sdram_size += bank_size;
+ }
+ /* endif */
+#ifdef SDRAM_DEBUG
+ serial_puts (" mb3cf: ");
+ write_4hex (bank);
+ serial_puts ("\n");
+#endif
+
+ /* write SDRAM bank 3 register */
+ mtdcr (memcfga, mem_mb3cf);
+ mtdcr (memcfgd, bank);
+
+
+ /* get SDRAM refresh interval register */
+ mtdcr (memcfga, mem_rtr);
+ tmp = mfdcr (memcfgd) & ~0x3FF80000;
+
+ if (tmemclk < NSto10PS (16))
+ tmp |= 0x05F00000;
+ else
+ tmp |= 0x03F80000;
+
+ /* write SDRAM refresh interval register */
+ mtdcr (memcfga, mem_rtr);
+ mtdcr (memcfgd, tmp);
+
+ /* enable SDRAM controller with no ECC, 32-bit SDRAM width, 16 byte burst */
+ mtdcr (memcfga, mem_mcopt1);
+ tmp = (mfdcr (memcfgd) & ~0xFFE00000) | 0x80E00000;
+ mtdcr (memcfga, mem_mcopt1);
+ mtdcr (memcfgd, tmp);
+
+
+
+ /*-------------------------------------------------------------------------+
+ | Interrupt controller setup for the PIP405 board.
+ | Note: IRQ 0-15 405GP internally generated; active high; level sensitive
+ | IRQ 16 405GP internally generated; active low; level sensitive
+ | IRQ 17-24 RESERVED
+ | IRQ 25 (EXT IRQ 0) SouthBridg; active low; level sensitive
+ | IRQ 26 (EXT IRQ 1) NMI: active low; level sensitive
+ | IRQ 27 (EXT IRQ 2) SMI: active Low; level sensitive
+ | IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
+ | IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
+ | IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
+ | IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
+ | Note for PIP405 board:
+ | An interrupt taken for the SouthBridge (IRQ 25) indicates that
+ | the Interrupt Controller in the South Bridge has caused the
+ | interrupt. The IC must be read to determine which device
+ | caused the interrupt.
+ |
+ +-------------------------------------------------------------------------*/
+ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (uicer, 0x00000000); /* disable all ints */
+ mtdcr (uiccr, 0x00000000); /* set all to be non-critical (for now) */
+ mtdcr (uicpr, 0xFFFFFF80); /* set int polarities */
+ mtdcr (uictr, 0x10000000); /* set int trigger levels */
+ mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+
+ return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+ unsigned char s[50];
+ unsigned char bc;
+ int i;
+ backup_t *b = (backup_t *) s;
+
+ puts ("Board: ");
+
+ i = getenv_r ("serial#", s, 32);
+ if ((i == 0) || strncmp (s, "PIP405", 6)) {
+ get_backup_values (b);
+ if (strncmp (b->signature, "MPL\0", 4) != 0) {
+ puts ("### No HW ID - assuming PIP405");
+ } else {
+ b->serial_name[6] = 0;
+ printf ("%s SN: %s", b->serial_name,
+ &b->serial_name[7]);
+ }
+ } else {
+ s[6] = 0;
+ printf ("%s SN: %s", s, &s[7]);
+ }
+ bc = in8 (CONFIG_PORT_ADDR);
+ printf (" Boot Config: 0x%x\n", bc);
+ return (0);
+}
+
+
+/* ------------------------------------------------------------------------- */
+/* ------------------------------------------------------------------------- */
+/*
+ initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
+ the necessary info for SDRAM controller configuration
+*/
+/* ------------------------------------------------------------------------- */
+/* ------------------------------------------------------------------------- */
+static int test_dram (unsigned long ramsize);
+
+long int initdram (int board_type)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ unsigned long bank_reg[4], tmp, bank_size;
+ int i, ds;
+ unsigned long TotalSize;
+
+ ds = 0;
+ /* since the DRAM controller is allready set up,
+ * calculate the size with the bank registers
+ */
+ mtdcr (memcfga, mem_mb0cf);
+ bank_reg[0] = mfdcr (memcfgd);
+ mtdcr (memcfga, mem_mb1cf);
+ bank_reg[1] = mfdcr (memcfgd);
+ mtdcr (memcfga, mem_mb2cf);
+ bank_reg[2] = mfdcr (memcfgd);
+ mtdcr (memcfga, mem_mb3cf);
+ bank_reg[3] = mfdcr (memcfgd);
+ TotalSize = 0;
+ for (i = 0; i < 4; i++) {
+ if ((bank_reg[i] & 0x1) == 0x1) {
+ tmp = (bank_reg[i] >> 17) & 0x7;
+ bank_size = 4 << tmp;
+ TotalSize += bank_size;
+ } else
+ ds = 1;
+ }
+ if (ds == 1)
+ printf ("single-sided DIMM ");
+ else
+ printf ("double-sided DIMM ");
+ test_dram (TotalSize * 1024 * 1024);
+ /* bank 2 (SDRAM Clock 2) is not usable if 133MHz SDRAM IF */
+ (void) get_clocks();
+ if (gd->cpu_clk > 220000000)
+ TotalSize /= 2;
+ return (TotalSize * 1024 * 1024);
+}
+
+/* ------------------------------------------------------------------------- */
+
+
+static int test_dram (unsigned long ramsize)
+{
+ /* not yet implemented */
+ return (1);
+}
+
+
+int misc_init_r (void)
+{
+ return (0);
+}
+
+/***************************************************************************
+ * some helping routines
+ */
+
+int overwrite_console (void)
+{
+ return (in8 (CONFIG_PORT_ADDR) & 0x1); /* return TRUE if console should be overwritten */
+}
+
+
+
+extern int isa_init (void);
+
+
+void print_pip405_rev (void)
+{
+ unsigned char part, vers, cfg;
+
+ part = in8 (PLD_PART_REG);
+ vers = in8 (PLD_VERS_REG);
+ cfg = in8 (PLD_BOARD_CFG_REG);
+ printf ("Rev: PIP405-%d Rev %c PLD%d %d PLD%d %d\n",
+ 16 - ((cfg >> 4) & 0xf), (cfg & 0xf) + 'A', part & 0xf,
+ vers & 0xf, (part >> 4) & 0xf, (vers >> 4) & 0xf);
+}
+
+extern void check_env(void);
+
+
+int last_stage_init (void)
+{
+ print_pip405_rev ();
+ isa_init ();
+ show_stdio_dev ();
+ check_env();
+ return 0;
+}
+
+/************************************************************************
+* Print PIP405 Info
+************************************************************************/
+void print_pip405_info (void)
+{
+ unsigned char part, vers, cfg, ledu, sysman, flashcom, can, serpwr,
+ compwr, nicvga, scsirst;
+
+ part = in8 (PLD_PART_REG);
+ vers = in8 (PLD_VERS_REG);
+ cfg = in8 (PLD_BOARD_CFG_REG);
+ ledu = in8 (PLD_LED_USER_REG);
+ sysman = in8 (PLD_SYS_MAN_REG);
+ flashcom = in8 (PLD_FLASH_COM_REG);
+ can = in8 (PLD_CAN_REG);
+ serpwr = in8 (PLD_SER_PWR_REG);
+ compwr = in8 (PLD_COM_PWR_REG);
+ nicvga = in8 (PLD_NIC_VGA_REG);
+ scsirst = in8 (PLD_SCSI_RST_REG);
+ printf ("PLD Part %d version %d\n",
+ part & 0xf, vers & 0xf);
+ printf ("PLD Part %d version %d\n",
+ (part >> 4) & 0xf, (vers >> 4) & 0xf);
+ printf ("Board Revision %c\n", (cfg & 0xf) + 'A');
+ printf ("Population Options %d %d %d %d\n",
+ (cfg >> 4) & 0x1, (cfg >> 5) & 0x1,
+ (cfg >> 6) & 0x1, (cfg >> 7) & 0x1);
+ printf ("User LED0 %s User LED1 %s\n",
+ ((ledu & 0x1) == 0x1) ? "on" : "off",
+ ((ledu & 0x2) == 0x2) ? "on" : "off");
+ printf ("Additionally Options %d %d\n",
+ (ledu >> 2) & 0x1, (ledu >> 3) & 0x1);
+ printf ("User Config Switch %d %d %d %d\n",
+ (ledu >> 4) & 0x1, (ledu >> 5) & 0x1,
+ (ledu >> 6) & 0x1, (ledu >> 7) & 0x1);
+ switch (sysman & 0x3) {
+ case 0:
+ printf ("PCI Clocks are running\n");
+ break;
+ case 1:
+ printf ("PCI Clocks are stopped in POS State\n");
+ break;
+ case 2:
+ printf ("PCI Clocks are stopped when PCI_STP# is asserted\n");
+ break;
+ case 3:
+ printf ("PCI Clocks are stopped\n");
+ break;
+ }
+ switch ((sysman >> 2) & 0x3) {
+ case 0:
+ printf ("Main Clocks are running\n");
+ break;
+ case 1:
+ printf ("Main Clocks are stopped in POS State\n");
+ break;
+ case 2:
+ case 3:
+ printf ("PCI Clocks are stopped\n");
+ break;
+ }
+ printf ("INIT asserts %sINT2# (SMI)\n",
+ ((sysman & 0x10) == 0x10) ? "" : "not ");
+ printf ("INIT asserts %sINT1# (NMI)\n",
+ ((sysman & 0x20) == 0x20) ? "" : "not ");
+ printf ("INIT occured %d\n", (sysman >> 6) & 0x1);
+ printf ("SER1 is routed to %s\n",
+ ((flashcom & 0x1) == 0x1) ? "RS485" : "RS232");
+ printf ("COM2 is routed to %s\n",
+ ((flashcom & 0x2) == 0x2) ? "RS485" : "RS232");
+ printf ("RS485 is configured as %s duplex\n",
+ ((flashcom & 0x4) == 0x4) ? "full" : "half");
+ printf ("RS485 is connected to %s\n",
+ ((flashcom & 0x8) == 0x8) ? "COM1" : "COM2");
+ printf ("SER1 uses handshakes %s\n",
+ ((flashcom & 0x10) == 0x10) ? "DTR/DSR" : "RTS/CTS");
+ printf ("Bootflash is %swriteprotected\n",
+ ((flashcom & 0x20) == 0x20) ? "not " : "");
+ printf ("Bootflash VPP is %s\n",
+ ((flashcom & 0x40) == 0x40) ? "on" : "off");
+ printf ("Bootsector is %swriteprotected\n",
+ ((flashcom & 0x80) == 0x80) ? "not " : "");
+ switch ((can) & 0x3) {
+ case 0:
+ printf ("CAN Controller is on address 0x1000..0x10FF\n");
+ break;
+ case 1:
+ printf ("CAN Controller is on address 0x8000..0x80FF\n");
+ break;
+ case 2:
+ printf ("CAN Controller is on address 0xE000..0xE0FF\n");
+ break;
+ case 3:
+ printf ("CAN Controller is disabled\n");
+ break;
+ }
+ switch ((can >> 2) & 0x3) {
+ case 0:
+ printf ("CAN Controller Reset is ISA Reset\n");
+ break;
+ case 1:
+ printf ("CAN Controller Reset is ISA Reset and POS State\n");
+ break;
+ case 2:
+ case 3:
+ printf ("CAN Controller is in reset\n");
+ break;
+ }
+ if (((can >> 4) < 3) || ((can >> 4) == 8) || ((can >> 4) == 13))
+ printf ("CAN Interrupt is disabled\n");
+ else
+ printf ("CAN Interrupt is ISA INT%d\n", (can >> 4) & 0xf);
+ switch (serpwr & 0x3) {
+ case 0:
+ printf ("SER0 Drivers are enabled\n");
+ break;
+ case 1:
+ printf ("SER0 Drivers are disabled in the POS state\n");
+ break;
+ case 2:
+ case 3:
+ printf ("SER0 Drivers are disabled\n");
+ break;
+ }
+ switch ((serpwr >> 2) & 0x3) {
+ case 0:
+ printf ("SER1 Drivers are enabled\n");
+ break;
+ case 1:
+ printf ("SER1 Drivers are disabled in the POS state\n");
+ break;
+ case 2:
+ case 3:
+ printf ("SER1 Drivers are disabled\n");
+ break;
+ }
+ switch (compwr & 0x3) {
+ case 0:
+ printf ("COM1 Drivers are enabled\n");
+ break;
+ case 1:
+ printf ("COM1 Drivers are disabled in the POS state\n");
+ break;
+ case 2:
+ case 3:
+ printf ("COM1 Drivers are disabled\n");
+ break;
+ }
+ switch ((compwr >> 2) & 0x3) {
+ case 0:
+ printf ("COM2 Drivers are enabled\n");
+ break;
+ case 1:
+ printf ("COM2 Drivers are disabled in the POS state\n");
+ break;
+ case 2:
+ case 3:
+ printf ("COM2 Drivers are disabled\n");
+ break;
+ }
+ switch ((nicvga) & 0x3) {
+ case 0:
+ printf ("PHY is running\n");
+ break;
+ case 1:
+ printf ("PHY is in Power save mode in POS state\n");
+ break;
+ case 2:
+ case 3:
+ printf ("PHY is in Power save mode\n");
+ break;
+ }
+ switch ((nicvga >> 2) & 0x3) {
+ case 0:
+ printf ("VGA is running\n");
+ break;
+ case 1:
+ printf ("VGA is in Power save mode in POS state\n");
+ break;
+ case 2:
+ case 3:
+ printf ("VGA is in Power save mode\n");
+ break;
+ }
+ printf ("PHY is %sreseted\n", ((nicvga & 0x10) == 0x10) ? "" : "not ");
+ printf ("VGA is %sreseted\n", ((nicvga & 0x20) == 0x20) ? "" : "not ");
+ printf ("Reserved Configuration is %d %d\n", (nicvga >> 6) & 0x1,
+ (nicvga >> 7) & 0x1);
+ switch ((scsirst) & 0x3) {
+ case 0:
+ printf ("SCSI Controller is running\n");
+ break;
+ case 1:
+ printf ("SCSI Controller is in Power save mode in POS state\n");
+ break;
+ case 2:
+ case 3:
+ printf ("SCSI Controller is in Power save mode\n");
+ break;
+ }
+ printf ("SCSI termination is %s\n",
+ ((scsirst & 0x4) == 0x4) ? "disabled" : "enabled");
+ printf ("SCSI Controller is %sreseted\n",
+ ((scsirst & 0x10) == 0x10) ? "" : "not ");
+ printf ("IDE disks are %sreseted\n",
+ ((scsirst & 0x20) == 0x20) ? "" : "not ");
+ printf ("ISA Bus is %sreseted\n",
+ ((scsirst & 0x40) == 0x40) ? "" : "not ");
+ printf ("Super IO is %sreseted\n",
+ ((scsirst & 0x80) == 0x80) ? "" : "not ");
+}
+
+void user_led0 (unsigned char on)
+{
+ if (on == TRUE)
+ out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) | 0x1));
+ else
+ out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) & 0xfe));
+}
+
+void user_led1 (unsigned char on)
+{
+ if (on == TRUE)
+ out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) | 0x2));
+ else
+ out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) & 0xfd));
+}
+
+void ide_set_reset (int idereset)
+{
+ /* if reset = 1 IDE reset will be asserted */
+ unsigned char resreg;
+
+ resreg = in8 (PLD_SCSI_RST_REG);
+ if (idereset == 1)
+ resreg |= 0x20;
+ else {
+ udelay(10000);
+ resreg &= 0xdf;
+ }
+ out8 (PLD_SCSI_RST_REG, resreg);
+}
+
+