summaryrefslogtreecommitdiff
path: root/board/omap2420h4
diff options
context:
space:
mode:
Diffstat (limited to 'board/omap2420h4')
-rw-r--r--board/omap2420h4/Makefile47
-rw-r--r--board/omap2420h4/config.mk26
-rw-r--r--board/omap2420h4/flash.c536
-rw-r--r--board/omap2420h4/mem.c306
-rw-r--r--board/omap2420h4/omap2420h4.c834
-rw-r--r--board/omap2420h4/platform.S237
-rw-r--r--board/omap2420h4/sys_info.c202
-rw-r--r--board/omap2420h4/u-boot.lds58
8 files changed, 2246 insertions, 0 deletions
diff --git a/board/omap2420h4/Makefile b/board/omap2420h4/Makefile
new file mode 100644
index 0000000..deab6b6
--- /dev/null
+++ b/board/omap2420h4/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := omap2420h4.o flash.o mem.o sys_info.o
+SOBJS := platform.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $^
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/omap2420h4/config.mk b/board/omap2420h4/config.mk
new file mode 100644
index 0000000..1c770f3
--- /dev/null
+++ b/board/omap2420h4/config.mk
@@ -0,0 +1,26 @@
+#
+# (C) Copyright 2004
+# Texas Instruments, <www.ti.com>
+#
+# TI H4 board with OMAP2420 (ARM1136) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# H4 has 1 bank of 32MB or 64MB mDDR-SDRAM on CS0
+# H4 has 1 bank of 32MB or 00MB mDDR-SDRAM on CS1
+# Physical Address:
+# 8000'0000 (bank0)
+# A000/0000 (bank1) ES2 will be configurable
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+# CONFIG_PARTIAL_SRAM must be defined to use this.
+TEXT_BASE = 0x80e80000
+
+# Used with full SRAM boot.
+# This is either with a GP system or a signed boot image.
+# easiest, and safest way to go if you can.
+# Comment out //CONFIG_PARTIAL_SRAM for this one.
+#
+#TEXT_BASE = 0x40280000
+
diff --git a/board/omap2420h4/flash.c b/board/omap2420h4/flash.c
new file mode 100644
index 0000000..3b6a69f
--- /dev/null
+++ b/board/omap2420h4/flash.c
@@ -0,0 +1,536 @@
+/*
+ * (C) Copyright 2001
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2001-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/sizes.h>
+#include <linux/byteorder/swab.h>
+
+#define PHYS_FLASH_SECT_SIZE SZ_128K
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/* Board support for 1 or 2 flash devices */
+#undef FLASH_PORT_WIDTH32
+#define FLASH_PORT_WIDTH16
+
+#ifdef FLASH_PORT_WIDTH16
+# define FLASH_PORT_WIDTH ushort
+# define FLASH_PORT_WIDTHV vu_short
+# define SWAP(x) __swab16(x)
+#else
+# define FLASH_PORT_WIDTH ulong
+# define FLASH_PORT_WIDTHV vu_long
+# define SWAP(x) __swab32(x)
+#endif
+
+#define FPW FLASH_PORT_WIDTH
+#define FPWV FLASH_PORT_WIDTHV
+
+#define mb() __asm__ __volatile__ ("" : : : "memory")
+
+
+/* Flash Organization Structure */
+typedef struct OrgDef {
+ unsigned int sector_number;
+ unsigned int sector_size;
+} OrgDef;
+
+
+/* Flash Organizations */
+OrgDef OrgIntel_28F256L18T[] = {
+ {4, SZ_32K}, /* 4 * 32kBytes sectors */
+ {255, SZ_128K}, /* 255 * 128kBytes sectors */
+};
+
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+unsigned long flash_init (void);
+static ulong flash_get_size (FPW * addr, flash_info_t * info);
+static int write_data (flash_info_t * info, ulong dest, FPW data);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+void inline spin_wheel (void);
+void flash_print_info (flash_info_t * info);
+void flash_unprotect_sectors (FPWV * addr);
+int flash_erase (flash_info_t * info, int s_first, int s_last);
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
+void flash_unlock(flash_info_t * info, int bank);
+int flash_probe(void);
+
+/*-----------------------------------------------------------------------
+ */
+
+/* see if flash is ok */
+int flash_probe(void)
+{
+ return(flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[0]));
+}
+
+unsigned long flash_init (void)
+{
+ int i;
+ ulong size = 0;
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ switch (i) {
+ case 0:
+ flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
+ flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
+ /* to reset the lock bit */
+ flash_unlock(&flash_info[i],i);
+ break;
+ case 1:
+ flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]);
+ flash_get_offsets (PHYS_FLASH_2, &flash_info[i]);
+ /* to reset the lock bit */
+ flash_unlock(&flash_info[i],i);
+ break;
+
+ default:
+ panic ("configured too many flash banks!\n");
+ break;
+ }
+ size += flash_info[i].size;
+ }
+
+ /* Protect monitor and environment sectors
+ */
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_FLASH_BASE,
+ CFG_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
+
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+ return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_unlock(flash_info_t * info, int bank)
+{
+ int j;
+ if (!bank)
+ j=2; /* leave 0,1 locked for boot bank */
+ else
+ j=0; /* get the whole bank for #2 */
+
+ for (;j<CFG_MAX_FLASH_SECT;j++) {
+ FPWV *addr = (FPWV *) (info->start[j]);
+ if (addr == NULL) {
+ printf("Warning Flash probe failed\n");
+ break;
+ }
+ flash_unprotect_sectors (addr);
+ *addr = (FPW) 0x00500050;/* clear status register */
+ *addr = (FPW) 0x00FF00FF;/* resest to read mode */
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t * info)
+{
+ int i;
+ volatile int r; /* gcc 3.4.0-1 strangeness, need to follow up.*/
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+ for (i = 0; i < info->sector_count; i++) {
+ if (i > 254) { /* 255,256,257,258 */
+ r=i;
+ info->start[i] = base + (((r-(int)255) * SZ_32K) + (255*PHYS_FLASH_SECT_SIZE));
+ info->protect[i] = 0;
+ } else {
+ info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
+ info->protect[i] = 0;
+ }
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL:
+ printf ("INTEL ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F256L18T:
+ printf ("FLASH 28F256L18T\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i], info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+ return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (FPW * addr, flash_info_t * info)
+{
+ volatile FPW value;
+ /* mb(); this one makes ARM11 err go away, but I want it :) as a guide to problems */
+
+ /* Write auto select command: read Manufacturer ID */
+ addr[0x5555] = (FPW) 0x00AA00AA;
+ addr[0x2AAA] = (FPW) 0x00550055;
+ addr[0x5555] = (FPW) 0x00900090;
+
+ mb ();
+ value = addr[0] & 0xFF; /* just looking for 89 (8989 is hw pat)*/
+
+ switch (value) {
+
+ case (FPW) INTEL_MANUFACT:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
+ return(0); /* no or unknown flash */
+ }
+
+ mb ();
+ value = addr[1]; /* device ID */
+ switch (value) {
+
+ case (FPW) (INTEL_ID_28F256L18T): /* 880D */
+ info->flash_id += FLASH_28F256L18T;
+ info->sector_count = 259; /*0-258*/
+ info->size = SZ_32M;
+ break; /* => 32 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ break;
+ }
+
+ if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ printf ("** ERROR: sector count %d > max (%d) **\n",
+ info->sector_count, CFG_MAX_FLASH_SECT);
+ info->sector_count = CFG_MAX_FLASH_SECT;
+ }
+
+ addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
+
+ return(info->size);
+}
+
+
+/* unprotects a sector for write and erase
+ * on some intel parts, this unprotects the entire chip, but it
+ * wont hurt to call this additional times per sector...
+ */
+void flash_unprotect_sectors (FPWV * addr)
+{
+#define PD_FINTEL_WSMS_READY_MASK 0x0080
+
+ *addr = (FPW) 0x00500050; /* clear status register */
+
+ /* this sends the clear lock bit command */
+ *addr = (FPW) 0x00600060;
+ *addr = (FPW) 0x00D000D0;
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+ int prot, sect;
+ ulong type, start, last;
+ int rcode = 0;
+#ifdef CONFIG_USE_IRQ
+ int iflag;
+#endif
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ type = (info->flash_id & FLASH_VENDMASK);
+ if ((type != FLASH_MAN_INTEL)) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+
+ start = get_timer (0);
+ last = start;
+
+#ifdef CONFIG_USE_IRQ
+ /* Disable interrupts which might cause a timeout here */
+ iflag = disable_interrupts ();
+#endif
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ FPWV *addr = (FPWV *) (info->start[sect]);
+ FPW status;
+
+ printf ("Erasing sector %2d ... ", sect);
+
+ flash_unprotect_sectors (addr);
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
+
+ *addr = (FPW) 0x00500050;/* clear status register */
+ *addr = (FPW) 0x00200020;/* erase setup */
+ *addr = (FPW) 0x00D000D0;/* erase confirm */
+
+ while (((status =
+ *addr) & (FPW) 0x00800080) !=
+ (FPW) 0x00800080) {
+ if (get_timer_masked () >
+ CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ /* suspend erase */
+ *addr = (FPW) 0x00B000B0;
+ /* reset to read mode */
+ *addr = (FPW) 0x00FF00FF;
+ rcode = 1;
+ break;
+ }
+ }
+
+ /* clear status register cmd. */
+ *addr = (FPW) 0x00500050;
+ *addr = (FPW) 0x00FF00FF;/* resest to read mode */
+ printf (" done\n");
+ }
+ }
+#ifdef CONFIG_USE_IRQ
+ if (iflag)
+ enable_interrupts();
+#endif
+
+ return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ulong cp, wp;
+ FPW data;
+ int count, i, l, rc, port_width;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return 4;
+ }
+/* get lower word aligned address */
+#ifdef FLASH_PORT_WIDTH16
+ wp = (addr & ~1);
+ port_width = 2;
+#else
+ wp = (addr & ~3);
+ port_width = 4;
+#endif
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+ for (; i < port_width && cnt > 0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+ return(rc);
+ }
+ wp += port_width;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ count = 0;
+ while (cnt >= port_width) {
+ data = 0;
+ for (i = 0; i < port_width; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+ return(rc);
+ }
+ wp += port_width;
+ cnt -= port_width;
+ if (count++ > 0x800) {
+ spin_wheel ();
+ count = 0;
+ }
+ }
+
+ if (cnt == 0) {
+ return(0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i < port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ return(write_data (info, wp, SWAP (data)));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t * info, ulong dest, FPW data)
+{
+ FPWV *addr = (FPWV *) dest;
+ ulong status;
+#ifdef CONFIG_USE_IRQ
+ int iflag;
+#endif
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*addr & data) != data) {
+ printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
+ return(2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+#ifdef CONFIG_USE_IRQ
+ iflag = disable_interrupts ();
+#endif
+ *addr = (FPW) 0x00400040; /* write setup */
+ *addr = data;
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
+
+ /* wait while polling the status register */
+ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+ if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+ *addr = (FPW) 0x00FF00FF; /* restore read mode */
+ return(1);
+ }
+ }
+ *addr = (FPW) 0x00FF00FF; /* restore read mode */
+
+#ifdef CONFIG_USE_IRQ
+ if (iflag)
+ enable_interrupts();
+#endif
+
+ return(0);
+}
+
+void inline spin_wheel (void)
+{
+ static int p = 0;
+ static char w[] = "\\/-";
+
+ printf ("\010%c", w[p]);
+ (++p == 3) ? (p = 0) : 0;
+}
diff --git a/board/omap2420h4/mem.c b/board/omap2420h4/mem.c
new file mode 100644
index 0000000..a3b3453
--- /dev/null
+++ b/board/omap2420h4/mem.c
@@ -0,0 +1,306 @@
+/*
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/omap2420.h>
+#include <asm/io.h>
+#include <asm/arch/bits.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/clocks.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/sys_info.h>
+
+/************************************************************
+ * sdelay() - simple spin loop. Will be constant time as
+ * its generally used in 12MHz bypass conditions only. This
+ * is necessary until timers are accessible.
+ *
+ * not inline to increase chances its in cache when called
+ *************************************************************/
+void sdelay (unsigned long loops)
+{
+ __asm__ volatile ("1:\n"
+ "subs %0, %1, #1\n"
+ "bne 1b":"=r" (loops):"0" (loops));
+}
+
+/*********************************************************************************
+ * prcm_init() - inits clocks for PRCM as defined in clocks.h (config II default).
+ * -- called from SRAM, or Flash (using temp SRAM stack).
+ *********************************************************************************/
+void prcm_init(void)
+{
+ u32 rev,div;
+#ifdef CONFIG_PARTIAL_SRAM
+ void (*f_lock_pll) (u32, u32, u32, u32);
+ extern void *_end_vect, *_start;
+
+ f_lock_pll = (void *)((u32)&_end_vect - (u32)&_start + SRAM_VECT_CODE);
+#endif
+
+ __raw_writel(0, CM_FCLKEN1_CORE); /* stop all clocks to reduce ringing */
+ __raw_writel(0, CM_FCLKEN2_CORE); /* may not be necessary */
+ __raw_writel(0, CM_ICLKEN1_CORE);
+ __raw_writel(0, CM_ICLKEN2_CORE);
+
+ __raw_writel(DPLL_OUT, CM_CLKSEL2_PLL); /* set DPLL out */
+ __raw_writel(MPU_DIV, CM_CLKSEL_MPU); /* set MPU divider */
+ __raw_writel(DSP_DIV, CM_CLKSEL_DSP); /* set dsp and iva dividers */
+ __raw_writel(GFX_DIV, CM_CLKSEL_GFX); /* set gfx dividers */
+
+ rev = get_cpu_rev();
+ if (rev == CPU_2420_ES1 || rev == CPU_2422_ES1)
+ div = BUS_DIV_ES1;
+ else
+ div = BUS_DIV;
+ __raw_writel(div, CM_CLKSEL1_CORE);/* set L3/L4/USB/Display/Vlnc/SSi dividers */
+ sdelay(1000);
+
+#ifndef CONFIG_PARTIAL_SRAM
+ /* If running fully from SRAM this is OK. The Flash bus drops out for just a little.
+ * but then comes back. If running from Flash this sequence kills you, thus you need
+ * to run it using CONFIG_PARTIAL_SRAM.
+ */
+ __raw_writel(MODE_BYPASS_FAST, CM_CLKEN_PLL); /* go to bypass, fast relock */
+ wait_on_value(BIT0|BIT1, BIT1, CM_IDLEST_CKGEN, LDELAY); /* wait till in bypass */
+
+ /* set clock selection and dpll dividers. */
+ __raw_writel(DPLL_VAL, CM_CLKSEL1_PLL); /* set pll for target rate */
+ __raw_writel(COMMIT_DIVIDERS, PRCM_CLKCFG_CTRL); /* commit dividers */
+ sdelay(10000);
+ __raw_writel(DPLL_LOCK, CM_CLKEN_PLL); /* enable dpll */
+ sdelay(10000);
+ wait_on_value(BIT0|BIT1, BIT2, CM_IDLEST_CKGEN, LDELAY); /*wait for dpll lock */
+#else
+/* if running from flash, need to jump to small relocated code area in SRAM.
+ * This is the only safe spot to do configurations from.
+ */
+ (*f_lock_pll)(PRCM_CLKCFG_CTRL, CM_CLKEN_PLL, DPLL_LOCK, CM_IDLEST_CKGEN);
+#endif
+
+ __raw_writel(DPLL_LOCK|APLL_LOCK, CM_CLKEN_PLL); /* enable apll */
+ wait_on_value(BIT8, BIT8, CM_IDLEST_CKGEN, LDELAY); /* wait for apll lock */
+ sdelay(1000);
+}
+
+/***********************************************
+ * memif_init() - init the gpmc and sdrc
+ * - early init routines, called from flash or
+ * SRAM.
+ ***********************************************/
+void memif_init(void)
+{
+ sdrc_init();
+#ifndef CONFIG_PARTIAL_SRAM /* don't init if calling from flash */
+ gpmc_init();
+#endif
+}
+
+/********************************************************
+ * mem_ok() - test used to see if timings are correct
+ * for a part. Helps in gussing which part
+ * we are currently using.
+ *******************************************************/
+u32 mem_ok(void)
+{ u32 val;
+ __raw_writel(0x0,OMAP2420_SDRC_CS0+0x400); /* clear pos A */
+ __raw_writel(0x12345678, OMAP2420_SDRC_CS0);/* pattern to pos B */
+ val = __raw_readl(OMAP2420_SDRC_CS0+0x400); /* get pos A value */
+ if (val != 0) /* see if pos A value changed*/
+ return(0);
+ else
+ return(1);
+}
+
+/********************************************************
+ * sdrc_init() - init the sdrc chip selects CS0 and CS1
+ * - early init routines, called from flash or
+ * SRAM.
+ *******************************************************/
+void sdrc_init(void)
+{
+ #define EARLY_INIT 1
+ do_sdrc_init(SDRC_CS0_OSET, EARLY_INIT); /* only init up first bank here */
+}
+
+/**********************************************************
+ * do_sdrc_init(): initialize the SDRAM for use.
+ * -called from low level code with stack only.
+ * -code sets up SDRAM timing and muxing for 2422 or 2420.
+ * -optimal settings can be placed here, or redone after i2c
+ * inspection of board info
+ *
+ * !!! When ES1 comes out need to conditionalize RFR value!!!
+ **********************************************************/
+void do_sdrc_init(u32 offset, u32 early)
+{
+ u32 cpu, bug=0, rev, shared=0, cs0=0, pmask=0,first=1;
+ sdrc_data_t *sdata; /* do not change type */
+
+ static const sdrc_data_t sdrc_2422 =
+ {
+ H4_2422_SDRC_SHARING, H4_2422_SDRC_MDCFG_0, H4_2422_SDRC_ACTIM_CTRLA_0,
+ H4_2422_SDRC_ACTIM_CTRLB_0, H4_2422_SDRC_RFR_CTRL_ES1, H4_2422_SDRC_MR_0,
+ H4_2422_SDRC_DLLA_CTRL, H4_2422_SDRC_DLLB_CTRL
+ };
+ static const sdrc_data_t sdrc_2420 =
+ {
+ H4_2420_SDRC_SHARING, H4_2420_SDRC_MDCFG_0, H4_2420_SDRC_ACTIM_CTRLA_0,
+ H4_2420_SDRC_ACTIM_CTRLB_0, H4_2420_SDRC_RFR_CTRL_ES1, H4_2420_SDRC_MR_0,
+ H4_2420_SDRC_DLLA_CTRL, H4_2420_SDRC_DLLB_CTRL
+ };
+
+ if (offset == SDRC_CS0_OSET)
+ cs0 = shared = 1; /* int regs shared between both chip select */
+
+ cpu = get_cpu_type();
+
+ /* warning generated, though code generation is correct. this may bite later, but is ok for now.
+ * there is only so much C code you can do on stack only operation.
+ */
+ if (cpu == CPU_2422)
+ sdata = &sdrc_2422;
+ else
+ sdata = &sdrc_2420;
+ __asm__ __volatile__("": : :"memory");
+#ifdef CONFIG_PARTIAL_SRAM
+ /* u-boot is compiled to run in DDR at 8xxxxxxx. If we use data here which is not pc relative
+ * we need to get the address correct. We need to find the current flash mapping to dress up
+ * the initial pointer load. As long as this is const data we should be ok.
+ */
+ if(early)
+ sdata = (sdrc_data_t *)(((u32)sdata & 0x0003FFFF) | get_gpmc0_base());
+#endif
+
+ men_combo:
+
+ if (!early && get_mem_type() == DDR_COMBO) { /* combo part has a shared CKE signal, can't use feature */
+ pmask = BIT2;
+ first = 0; /* trigger ddr_combo init */
+ }
+
+ if (shared) {
+ __raw_writel(__raw_readl(SMS_SYSCONFIG)|SMART_IDLE, SMS_SYSCONFIG);
+ __raw_writel(SMART_IDLE|SOFTRESET, SDRC_SYSCONFIG); /* reset sdrc */
+ wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); /* wait till reset done set */
+ __raw_writel(SMART_IDLE, SDRC_SYSCONFIG); /* clear soft reset */
+ __raw_writel(sdata->sdrc_sharing, SDRC_SHARING);
+ __raw_writel((__raw_readl(SDRC_POWER)|SMART_IDLE) & ~pmask, SDRC_POWER);
+ }
+ if (first)
+ __raw_writel(sdata->sdrc_mdcfg_0, SDRC_MCFG_0+offset);
+ else {
+ __raw_writel((__raw_readl(SDRC_POWER)|SMART_IDLE) & ~pmask, SDRC_POWER);
+ __raw_writel(H4_2420_COMBO_MDCFG_0,SDRC_MCFG_0+offset);
+ }
+
+ if (cs0) {
+ __raw_writel(sdata->sdrc_actim_ctrla_0, SDRC_ACTIM_CTRLA_0);
+ __raw_writel(sdata->sdrc_actim_ctrlb_0, SDRC_ACTIM_CTRLB_0);
+ } else {
+ __raw_writel(sdata->sdrc_actim_ctrla_0, SDRC_ACTIM_CTRLA_1);
+ __raw_writel(sdata->sdrc_actim_ctrlb_0, SDRC_ACTIM_CTRLB_1);
+ }
+
+ __raw_writel(sdata->sdrc_rfr_ctrl, SDRC_RFR_CTRL+offset);
+
+ /* init sequence for _mDDR_ using manual commands (DDR is a bit different) */
+ __raw_writel(CMD_NOP, SDRC_MANUAL_0+offset);
+ sdelay(5000); /* susposed to be 100us per design spec for mddr*/
+ __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0+offset);
+ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0+offset);
+ __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0+offset);
+
+ /*
+ * CSx SDRC Mode Register
+ * Burst length = 4 - DDR memory
+ * Serial mode
+ * CAS latency = x
+ */
+ __raw_writel(sdata->sdrc_mr_0, SDRC_MR_0+offset);
+
+ /* NOTE: ES1 242x _BUG_ DLL */
+ rev = get_cpu_rev();
+ if (rev == CPU_2420_ES1 || rev == CPU_2422_ES1)
+ bug = BIT0;
+ /* enable & load up DLL with good value for 75MHz, and set phase to 90% */
+ if (shared) {
+ __raw_writel(sdata->sdrc_dlla_ctrl, SDRC_DLLA_CTRL);
+ __raw_writel(sdata->sdrc_dlla_ctrl & ~(BIT2|bug), SDRC_DLLA_CTRL);
+ __raw_writel(sdata->sdrc_dllb_ctrl, SDRC_DLLB_CTRL);
+ __raw_writel(sdata->sdrc_dllb_ctrl & ~(BIT2|bug) , SDRC_DLLB_CTRL);
+ }
+ sdelay(9000);
+ if (!first || mem_ok()) /* passed test or 2nd bank init */
+ return;
+ else {
+ first = 0;
+ goto men_combo;
+ }
+}
+
+
+/*****************************************************
+ * gpmc_init(): init gpmc bus
+ * Init GPMC for x16, MuxMode (SDRAM in x32).
+ * This code can only be executed from SRAM or SDRAM.
+ *****************************************************/
+void gpmc_init(void)
+{
+ u32 mux=0, mtype, mwidth;
+
+ /* global settings */
+ __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */
+ __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */
+ __raw_writel(0x1, GPMC_TIMEOUT_CONTROL);/* timeout disable */
+ __raw_writel(0x111, GPMC_CONFIG); /* set nWP, disable limited addr */
+
+ /* discover bus connection from sysboot */
+ if (is_gpmc_muxed() == GPMC_MUXED)
+ mux = BIT9;
+ mtype = get_gpmc0_type();
+ mwidth = get_gpmc0_width();
+
+ /* setup cs0 */
+ __raw_writel(0x0, GPMC_CONFIG7_0); /* disable current map */
+ sdelay(1000);
+ __raw_writel(H4_24XX_GPMC_CONFIG1_0|mux|mtype|mwidth, GPMC_CONFIG1_0);
+ //__raw_writel(H4_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_0);
+ __raw_writel(H4_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_0);
+ __raw_writel(H4_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_0);
+ //__raw_writel(H4_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_0);
+ __raw_writel(H4_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_0);/* enable new mapping */
+ sdelay(2000);
+
+ /* setup cs1 */
+ __raw_writel(0, GPMC_CONFIG7_1); /* disable any mapping */
+ sdelay(1000);
+ __raw_writel(H4_24XX_GPMC_CONFIG1_1|mux, GPMC_CONFIG1_1);
+ __raw_writel(H4_24XX_GPMC_CONFIG2_1, GPMC_CONFIG2_1);
+ __raw_writel(H4_24XX_GPMC_CONFIG3_1, GPMC_CONFIG3_1);
+ __raw_writel(H4_24XX_GPMC_CONFIG4_1, GPMC_CONFIG4_1);
+ __raw_writel(H4_24XX_GPMC_CONFIG5_1, GPMC_CONFIG5_1);
+ __raw_writel(H4_24XX_GPMC_CONFIG6_1, GPMC_CONFIG6_1);
+ __raw_writel(H4_24XX_GPMC_CONFIG7_1, GPMC_CONFIG7_1); /* enable mapping */
+ sdelay(2000);
+}
+
diff --git a/board/omap2420h4/omap2420h4.c b/board/omap2420h4/omap2420h4.c
new file mode 100644
index 0000000..4696a71
--- /dev/null
+++ b/board/omap2420h4/omap2420h4.c
@@ -0,0 +1,834 @@
+/*
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/arch/omap2420.h>
+#include <asm/io.h>
+#include <asm/arch/bits.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/sys_info.h>
+#include <asm/arch/mem.h>
+#include <i2c.h>
+#include <asm/mach-types.h>
+
+static void wait_for_command_complete(unsigned int wd_base);
+
+/*******************************************************
+ * Routine: delay
+ * Description: spinning delay to use before udelay works
+ ******************************************************/
+static inline void delay (unsigned long loops)
+{
+ __asm__ volatile ("1:\n"
+ "subs %0, %1, #1\n"
+ "bne 1b":"=r" (loops):"0" (loops));
+}
+
+/*****************************************
+ * Routine: board_init
+ * Description: Early hardware init.
+ *****************************************/
+int board_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+#ifndef CONFIG_PARTIAL_SRAM
+ s_init(0x0); /* full sram build, never skip clock and sdrc, no point */
+#else
+ gpmc_init();
+#endif
+ gd->bd->bi_arch_number = MACH_TYPE_OMAP_H4; /* board id for linux */
+ gd->bd->bi_boot_params = (OMAP2420_SDRC_CS0+0x100); /* adress of boot parameters */
+
+ return 0;
+}
+
+/**********************************************************
+ * Routine: s_init
+ * Description: Does early system init of muxing and clocks.
+ * - Called at time when only stack is available.
+ **********************************************************/
+void s_init(int skip)
+{
+ watchdog_init();
+ set_muxconf_regs();
+ delay(100);
+
+ if (!skip)
+ prcm_init();
+
+ peripheral_enable();
+ icache_enable();
+#ifndef CONFIG_APTIX
+ if (!skip)
+ memif_init();
+#endif
+}
+
+/*******************************************************
+ * Routine: misc_init_r
+ * Description: Init ethernet (done here so udelay works)
+ ********************************************************/
+int misc_init_r (void)
+{
+ ether_init(); /* better done here so timers are init'ed */
+ return(0);
+}
+
+/****************************************
+ * Routine: watchdog_init
+ * Description: Shut down watch dogs
+ *****************************************/
+void watchdog_init(void)
+{
+ int mode;
+#define GP (BIT8|BIT9)
+
+ /* There are 4 watch dogs. 1 secure, and 3 general purpose.
+ * I would expect that the ROM takes care of the secure one,
+ * but we will try also. Of the 3 GP ones, 1 can reset us
+ * directly, the other 2 only generate MPU interrupts.
+ */
+ mode = (__raw_readl(CONTROL_STATUS) & (BIT8|BIT9));
+ if (mode == GP) {
+ __raw_writel(WD_UNLOCK1 ,WD1_BASE+WSPR);
+ wait_for_command_complete(WD1_BASE);
+ __raw_writel(WD_UNLOCK2 ,WD1_BASE+WSPR);
+ }
+ __raw_writel(WD_UNLOCK1 ,WD2_BASE+WSPR);
+ wait_for_command_complete(WD2_BASE);
+ __raw_writel(WD_UNLOCK2 ,WD2_BASE+WSPR);
+
+#if MPU_WD_CLOCKED /* value 0x10 stick on aptix, BIT4 polarity seems oppsite*/
+ __raw_writel(WD_UNLOCK1 ,WD3_BASE+WSPR);
+ wait_for_command_complete(WD3_BASE);
+ __raw_writel(WD_UNLOCK2 ,WD3_BASE+WSPR);
+
+ __raw_writel(WD_UNLOCK1 ,WD4_BASE+WSPR);
+ wait_for_command_complete(WD4_BASE);
+ __raw_writel(WD_UNLOCK2 ,WD4_BASE+WSPR);
+#endif
+}
+
+/******************************************************
+ * Routine: wait_for_command_complete
+ * Description: Wait for posting to finish on watchdog
+ ******************************************************/
+static void wait_for_command_complete(unsigned int wd_base)
+{
+ int pending = 1;
+ do {
+ pending = __raw_readl(wd_base+WWPS);
+ } while (pending);
+}
+
+/*******************************************************************
+ * Routine:ether_init
+ * Description: take the Ethernet controller out of reset and wait
+ * for the EEPROM load to complete.
+ ******************************************************************/
+void ether_init (void)
+{
+#ifdef CONFIG_DRIVER_LAN91C96
+ int cnt = 20;
+
+ __raw_writew(0x0, LAN_RESET_REGISTER);
+ do {
+ __raw_writew(0x1, LAN_RESET_REGISTER);
+ udelay (100);
+ if (cnt == 0)
+ goto h4reset_err_out;
+ --cnt;
+ } while (__raw_readw(LAN_RESET_REGISTER) != 0x1);
+
+ cnt = 20;
+
+ do {
+ __raw_writew(0x0, LAN_RESET_REGISTER);
+ udelay (100);
+ if (cnt == 0)
+ goto h4reset_err_out;
+ --cnt;
+ } while (__raw_readw(LAN_RESET_REGISTER) != 0x0000);
+ udelay (1000);
+
+ *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
+ udelay (1000);
+
+ h4reset_err_out:
+ return;
+#endif
+}
+
+/**********************************************
+ * Routine: dram_init
+ * Description: sets uboots idea of sdram size
+ **********************************************/
+int dram_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ unsigned int size0=0,size1=0;
+ u32 mtype, btype;
+#define NOT_EARLY 0
+
+ i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); /* need this a bit early */
+
+ btype = get_board_type();
+ mtype = get_mem_type();
+
+ display_board_info(btype);
+ if (btype == BOARD_H4_MENELAUS)
+ update_mux(btype,mtype);
+
+ if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) {
+ do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY); /* init other chip select */
+ size0 = size1 = SZ_32M;
+ } else
+ size0 = SZ_64M;
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = size0;
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ gd->bd->bi_dram[1].size = size1;
+
+ return 0;
+}
+
+/**********************************************************
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers
+ * specific to the hardware
+ *********************************************************/
+void set_muxconf_regs (void)
+{
+ muxSetupSDRC();
+ muxSetupGPMC();
+ muxSetupUsb0();
+ muxSetupUart3();
+ muxSetupI2C1();
+ muxSetupUART1();
+ muxSetupLCD();
+ muxSetupCamera();
+ muxSetupMMCSD();
+ muxSetupTouchScreen();
+ muxSetupHDQ();
+}
+
+/*****************************************************************
+ * Routine: peripheral_enable
+ * Description: Enable the clks & power for perifs (GPT2, UART1,...)
+ ******************************************************************/
+void peripheral_enable(void)
+{
+ unsigned int v, if_clks=0, func_clks=0;
+
+ /* Enable GP2 timer.*/
+ if_clks |= BIT4;
+ func_clks |= BIT4;
+ v = __raw_readl(CM_CLKSEL2_CORE) | 0x4; /* Sys_clk input OMAP2420_GPT2 */
+ __raw_writel(v, CM_CLKSEL2_CORE);
+ __raw_writel(0x1, CM_CLKSEL_WKUP);
+
+#ifdef CFG_NS16550
+ /* Enable UART1 clock */
+ func_clks |= BIT21;
+ if_clks |= BIT21;
+#endif
+ v = __raw_readl(CM_ICLKEN1_CORE) | if_clks; /* Interface clocks on */
+ __raw_writel(v,CM_ICLKEN1_CORE );
+ v = __raw_readl(CM_FCLKEN1_CORE) | func_clks; /* Functional Clocks on */
+ __raw_writel(v, CM_FCLKEN1_CORE);
+ delay(1000);
+
+#ifndef KERNEL_UPDATED
+ {
+#define V1 0xffffffff
+#define V2 0x00000007
+
+ __raw_writel(V1, CM_FCLKEN1_CORE);
+ __raw_writel(V2, CM_FCLKEN2_CORE);
+ __raw_writel(V1, CM_ICLKEN1_CORE);
+ __raw_writel(V1, CM_ICLKEN2_CORE);
+ }
+#endif
+}
+
+/****************************************
+ * Routine: muxSetupUsb0 (ostboot)
+ * Description: Setup usb muxing
+ *****************************************/
+void muxSetupUsb0(void)
+{
+ volatile uint8 *MuxConfigReg;
+ volatile uint32 *otgCtrlReg;
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_PUEN;
+ *MuxConfigReg &= (uint8)(~0x1F);
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VP;
+ *MuxConfigReg &= (uint8)(~0x1F);
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VM;
+ *MuxConfigReg &= (uint8)(~0x1F);
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_RCV;
+ *MuxConfigReg &= (uint8)(~0x1F);
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_TXEN;
+ *MuxConfigReg &= (uint8)(~0x1F);
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_SE0;
+ *MuxConfigReg &= (uint8)(~0x1F);
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_DAT;
+ *MuxConfigReg &= (uint8)(~0x1F);
+
+ /* setup for USB VBus detection */
+ otgCtrlReg = (volatile uint32 *)USB_OTG_CTRL;
+ *otgCtrlReg |= 0x00040000; /* bit 18 */
+}
+
+/****************************************
+ * Routine: muxSetupUart3 (ostboot)
+ * Description: Setup uart3 muxing
+ *****************************************/
+void muxSetupUart3(void)
+{
+ volatile uint8 *MuxConfigReg;
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_UART3_TX_IRTX;
+ *MuxConfigReg &= (uint8)(~0x1F);
+
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_UART3_RX_IRRX;
+ *MuxConfigReg &= (uint8)(~0x1F);
+}
+
+/****************************************
+ * Routine: muxSetupI2C1 (ostboot)
+ * Description: Setup i2c muxing
+ *****************************************/
+void muxSetupI2C1(void)
+{
+ volatile unsigned char *MuxConfigReg;
+
+ /* I2C1 Clock pin configuration, PIN = M19 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SCL;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* I2C1 Data pin configuration, PIN = L15 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SDA;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* Pull-up required on data line */
+ /* external pull-up already present. */
+ /* *MuxConfigReg |= 0x18 ;*/ /* Mode = 0, PullTypeSel=PU, PullUDEnable=Enabled */
+}
+
+/****************************************
+ * Routine: muxSetupUART1 (ostboot)
+ * Description: Set up uart1 muxing
+ *****************************************/
+void muxSetupUART1(void)
+{
+ volatile unsigned char *MuxConfigReg;
+
+ /* UART1_CTS pin configuration, PIN = D21 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_CTS;
+ *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
+
+ /* UART1_RTS pin configuration, PIN = H21 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RTS;
+ *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
+
+ /* UART1_TX pin configuration, PIN = L20 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_TX;
+ *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
+
+ /* UART1_RX pin configuration, PIN = T21 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RX;
+ *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
+}
+
+/****************************************
+ * Routine: muxSetupLCD (ostboot)
+ * Description: Setup lcd muxing
+ *****************************************/
+void muxSetupLCD(void)
+{
+ volatile unsigned char *MuxConfigReg;
+
+ /* LCD_D0 pin configuration, PIN = Y7 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D0;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D1 pin configuration, PIN = P10 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D1;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D2 pin configuration, PIN = V8 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D2;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D3 pin configuration, PIN = Y8 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D3;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D4 pin configuration, PIN = W8 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D4;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D5 pin configuration, PIN = R10 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D5;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D6 pin configuration, PIN = Y9 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D6;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D7 pin configuration, PIN = V9 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D7;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D8 pin configuration, PIN = W9 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D8;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D9 pin configuration, PIN = P11 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D9;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D10 pin configuration, PIN = V10 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D10;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D11 pin configuration, PIN = Y10 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D11;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D12 pin configuration, PIN = W10 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D12;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D13 pin configuration, PIN = R11 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D13;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D14 pin configuration, PIN = V11 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D14;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D15 pin configuration, PIN = W11 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D15;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D16 pin configuration, PIN = P12 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D16;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_D17 pin configuration, PIN = R12 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D17;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_PCLK pin configuration, PIN = W6 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_PCLK;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_VSYNC pin configuration, PIN = V7 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_VSYNC;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_HSYNC pin configuration, PIN = Y6 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_HSYNC;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* LCD_ACBIAS pin configuration, PIN = W7 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_ACBIAS;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+}
+
+/****************************************
+ * Routine: muxSetupCamera (ostboot)
+ * Description: Setup camera muxing
+ *****************************************/
+void muxSetupCamera(void)
+{
+ volatile unsigned char *MuxConfigReg;
+
+ /* CAMERA_RSTZ pin configuration, PIN = Y16 */
+ /* CAM_RST is connected through the I2C IO expander.*/
+ /* MuxConfigReg = (volatile unsigned char *), CONTROL_PADCONF_SYS_NRESWARM*/
+ /* *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled */
+
+ /* CAMERA_XCLK pin configuration, PIN = U3 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_XCLK;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_LCLK pin configuration, PIN = V5 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_LCLK;
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_VSYNC pin configuration, PIN = U2 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_VS,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_HSYNC pin configuration, PIN = T3 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_HS,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_DAT0 pin configuration, PIN = T4 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D0,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_DAT1 pin configuration, PIN = V2 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D1,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_DAT2 pin configuration, PIN = V3 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D2,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_DAT3 pin configuration, PIN = U4 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D3,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_DAT4 pin configuration, PIN = W2 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D4,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_DAT5 pin configuration, PIN = V4 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D5,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_DAT6 pin configuration, PIN = W3 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D6,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_DAT7 pin configuration, PIN = Y2 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D7,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_DAT8 pin configuration, PIN = Y4 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D8,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* CAMERA_DAT9 pin configuration, PIN = V6 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D9,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+}
+
+/****************************************
+ * Routine: muxSetupMMCSD (ostboot)
+ * Description: set up MMC muxing
+ *****************************************/
+void muxSetupMMCSD(void)
+{
+ volatile unsigned char *MuxConfigReg;
+
+ /* SDMMC_CLKI pin configuration, PIN = H15 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKI,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* SDMMC_CLKO pin configuration, PIN = G19 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKO,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* SDMMC_CMD pin configuration, PIN = H18 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+ // External pull-ups are present.
+ // *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU
+
+ /* SDMMC_DAT0 pin configuration, PIN = F20 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT0,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+ // External pull-ups are present.
+ // *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU
+
+ /* SDMMC_DAT1 pin configuration, PIN = H14 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT1,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+ // External pull-ups are present.
+ // *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU
+
+ /* SDMMC_DAT2 pin configuration, PIN = E19 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT2,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+ // External pull-ups are present.
+ // *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU
+
+ /* SDMMC_DAT3 pin configuration, PIN = D19 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT3,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+ // External pull-ups are present.
+ // *MuxConfigReg |= 0x18 ; // PullUDEnable=Enabled, PullTypeSel=PU
+
+ /* SDMMC_DDIR0 pin configuration, PIN = F19 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR0,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* SDMMC_DDIR1 pin configuration, PIN = E20 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR1,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* SDMMC_DDIR2 pin configuration, PIN = F18 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR2,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* SDMMC_DDIR3 pin configuration, PIN = E18 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR3,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* SDMMC_CDIR pin configuration, PIN = G18 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD_DIR,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* MMC_CD pin configuration, PIN = B3 ---2420IP ONLY---*/
+ /* MMC_CD for 2422IP=K1 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A14,
+ *MuxConfigReg = 0x03 ; // Mode = 3, PUPD=Disabled
+
+ /* MMC_WP pin configuration, PIN = B4 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A13,
+ *MuxConfigReg = 0x03 ; // Mode = 3, PUPD=Disabled
+}
+
+/******************************************
+ * Routine: muxSetupTouchScreen (ostboot)
+ * Description: Set up touch screen muxing
+ *******************************************/
+void muxSetupTouchScreen(void)
+{
+ volatile unsigned char *MuxConfigReg;
+
+ /* SPI1_CLK pin configuration, PIN = U18 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_CLK,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* SPI1_MOSI pin configuration, PIN = V20 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SIMO,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* SPI1_MISO pin configuration, PIN = T18 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SOMI,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* SPI1_nCS0 pin configuration, PIN = U19 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_NCS0,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+
+ /* PEN_IRQ pin configuration, PIN = P20 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MCBSP1_FSR,
+ *MuxConfigReg = 0x03 ; // Mode = 3, PUPD=Disabled
+}
+
+/****************************************
+ * Routine: muxSetupHDQ (ostboot)
+ * Description: setup 1wire mux
+ *****************************************/
+void muxSetupHDQ(void)
+{
+ volatile unsigned char *MuxConfigReg;
+
+ /* HDQ_SIO pin configuration, PIN = N18 */
+ MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_HDQ_SIO,
+ *MuxConfigReg = 0x00 ; // Mode = 0, PUPD=Disabled
+}
+
+/***************************************************************
+ * Routine: muxSetupGPMC (ostboot)
+ * Description: Configures balls which cam up in protected mode
+ ***************************************************************/
+void muxSetupGPMC(void)
+{
+ volatile uint8 *MuxConfigReg;
+ volatile unsigned int *MCR = 0x4800008C;
+
+ /* gpmc_io_dir */
+ *MCR = 0x19000000;
+
+ /* NOR FLASH CS0 */
+ /* signal - Gpmc_clk; pin - J4; offset - 0x0088; mode - 0; Byte-3 Pull/up - N/A */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_D2_BYTE3,
+ *MuxConfigReg = 0x00 ;
+
+ /* signal - Gpmc_iodir; pin - n2; offset - 0x008C; mode - 1; Byte-3 Pull/up - N/A */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE3,
+ *MuxConfigReg = 0x01 ;
+
+ /* MPDB(Multi Port Debug Port) CS1 */
+ /* signal - gpmc_ncs1; pin - N8; offset - 0x008C; mode - 0; Byte-1 Pull/up - N/A */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE1,
+ *MuxConfigReg = 0x00 ;
+
+ /* signal - Gpmc_ncs2; pin - E2; offset - 0x008C; mode - 0; Byte-2 Pull/up - N/A */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE2,
+ *MuxConfigReg = 0x00 ;
+
+
+}
+
+/****************************************************************
+ * Routine: muxSetupSDRC (ostboot)
+ * Description: Configures balls which come up in protected mode
+ ****************************************************************/
+void muxSetupSDRC(void)
+{
+ volatile uint8 *MuxConfigReg;
+
+ /* signal - sdrc_ncs1; pin - C12; offset - 0x00A0; mode - 0; Byte-1 Pull/up - N/A */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_NCS0_BYTE1,
+ *MuxConfigReg = 0x00 ;
+
+ /* signal - sdrc_a12; pin - D11; offset - 0x0030; mode - 0; Byte-2 Pull/up - N/A */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_A14_BYTE2,
+ *MuxConfigReg = 0x00 ;
+
+ /* signal - sdrc_cke1; pin - B13; offset - 0x00A0; mode - 0; Byte-3 Pull/up - N/A */
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_NCS0_BYTE3,
+ *MuxConfigReg = 0x00;
+
+ if (get_cpu_type() == CPU_2422) {
+ MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_A14_BYTE0,
+ *MuxConfigReg = 0x1b;
+ }
+}
+
+/*****************************************************************************
+ * Routine: update_mux()
+ * Description: Update balls which are different beween boards. All should be
+ * updated to match functionaly. However, I'm only updating ones
+ * which I'll be using for now. When power comes into play they
+ * all need updating.
+ *****************************************************************************/
+void update_mux(u32 btype,u32 mtype)
+{
+ u32 cpu, base = OMAP2420_CTRL_BASE;
+ cpu = get_cpu_type();
+
+ if (btype == BOARD_H4_MENELAUS) {
+ if (cpu == CPU_2420) {
+ /* PIN = B3, GPIO.0->KBR5, mode 3, (pun?),-DO-*/
+ __raw_writeb(0x3, base+0x30);
+ /* PIN = B13, GPIO.38->KBC6, mode 3, (pun?)-DO-*/
+ __raw_writeb(0x3, base+0xa3);
+ /* PIN = F1, GPIO.25->HSUSBxx mode 3, (for external HS USB)*/
+ /* PIN = H1, GPIO.26->HSUSBxx mode 3, (for external HS USB)*/
+ /* PIN = K1, GPMC_ncs6 mode 0, (on board nand access)*/
+ /* PIN = L2, GPMC_ncs67 mode 0, (for external HS USB)*/
+ /* PIN = M1 (HSUSBOTG) */
+ /* PIN = P1, GPIO.35->MEN_POK mode 3, (menelaus powerok)-DO-*/
+ __raw_writeb(0x3, base+0x9d);
+ /* PIN = U32, (WLAN_CLKREQ) */
+ /* PIN = Y11, WLAN */
+ /* PIN = AA4, GPIO.15->KBC2, mode 3, -DO- */
+ __raw_writeb(0x3, base+0xe7);
+ /* PIN = AA8, mDOC */
+ /* PIN = AA10, BT */
+ /* PIN = AA13, WLAN */
+ /* PIN = M18 GPIO.96->MMC2_WP mode 3 -DO- */
+ __raw_writeb(0x3, base+0x10e);
+ /* PIN = N19 GPIO.98->WLAN_INT mode 3 -DO- */
+ __raw_writeb(0x3, base+0x110);
+ /* PIN = J15 HHUSB */
+ /* PIN = H19 HSUSB */
+ /* PIN = W13, P13, R13, W16 ... */
+ /* PIN = V12 GPIO.25->I2C_CAMEN mode 3 -DO- */
+ __raw_writeb(0x3, base+0xde);
+ /* PIN = W19 sys_nirq->MENELAUS_INT mode 0 -DO- */
+ __raw_writeb(0x0, base+0x12c);
+ /* PIN = AA17->sys_clkreq mode 0 -DO- */
+ __raw_writeb(0x0, base+0x136);
+ } else if (cpu == CPU_2422) {
+ /* PIN = B3, GPIO.0->nc, mode 3, set above (pun?)*/
+ /* PIN = B13, GPIO.cke1->nc, mode 0, set above, (pun?)*/
+ /* PIN = F1, GPIO.25->HSUSBxx mode 3, (for external HS USB)*/
+ /* PIN = H1, GPIO.26->HSUSBxx mode 3, (for external HS USB)*/
+ /* PIN = K1, GPMC_ncs6 mode 0, (on board nand access)*/
+ __raw_writeb(0x0, base+0x92);
+ /* PIN = L2, GPMC_ncs67 mode 0, (for external HS USB)*/
+ /* PIN = M1 (HSUSBOTG) */
+ /* PIN = P1, GPIO.35->MEN_POK mode 3, (menelaus powerok)-DO-*/
+ __raw_writeb(0x3, base+0x10c);
+ /* PIN = U32, (WLAN_CLKREQ) */
+ /* PIN = AA4, GPIO.15->KBC2, mode 3, -DO- */
+ __raw_writeb(0x3, base+0x30);
+ /* PIN = AA8, mDOC */
+ /* PIN = AA10, BT */
+ /* PIN = AA12, WLAN */
+ /* PIN = M18 GPIO.96->MMC2_WP mode 3 -DO- */
+ __raw_writeb(0x3, base+0x10e);
+ /* PIN = N19 GPIO.98->WLAN_INT mode 3 -DO- */
+ __raw_writeb(0x3, base+0x110);
+ /* PIN = J15 HHUSB */
+ /* PIN = H19 HSUSB */
+ /* PIN = W13, P13, R13, W16 ... */
+ /* PIN = V12 GPIO.25->I2C_CAMEN mode 3 -DO- */
+ __raw_writeb(0x3, base+0xde);
+ /* PIN = W19 sys_nirq->MENELAUS_INT mode 0 -DO- */
+ __raw_writeb(0x0, base+0x12c);
+ /* PIN = AA17->sys_clkreq mode 0 -DO- */
+ __raw_writeb(0x0, base+0x136);
+ }
+
+ } else if (btype == BOARD_H4_SDP) {
+ if (cpu == CPU_2420) {
+ /* PIN = B3, GPIO.0->nc mode 3, set above (pun?)*/
+ /* PIN = B13, GPIO.cke1->nc, mode 0, set above, (pun?)*/
+ /* Pin = Y11 VLNQ */
+ /* Pin = AA4 VLNQ */
+ /* Pin = AA6 VLNQ */
+ /* Pin = AA8 VLNQ */
+ /* Pin = AA10 VLNQ */
+ /* Pin = AA12 VLNQ */
+ /* PIN = M18 GPIO.96->KBR5 mode 3 -DO- */
+ __raw_writeb(0x3, base+0x10e);
+ /* PIN = N19 GPIO.98->KBC6 mode 3 -DO- */
+ __raw_writeb(0x3, base+0x110);
+ /* PIN = J15 MDOC_nDMAREQ */
+ /* PIN = H19 GPIO.100->KBC2 mode 3 -DO- */
+ __raw_writeb(0x3, base+0x114);
+ /* PIN = W13, V12, P13, R13, W19, W16 ... */
+ /* PIN = AA17 sys_clkreq->bt_clk_req mode 0 */
+ } else if (cpu == CPU_2422) {
+ /* PIN = B3, GPIO.0->MMC_CD, mode 3, set above */
+ /* PIN = B13, GPIO.38->wlan_int, mode 3, (pun?)*/
+ /* Pin = Y11 VLNQ */
+ /* Pin = AA4 VLNQ */
+ /* Pin = AA6 VLNQ */
+ /* Pin = AA8 VLNQ */
+ /* Pin = AA10 VLNQ */
+ /* Pin = AA12 VLNQ */
+ /* PIN = M18 GPIO.96->KBR5 mode 3 -DO- */
+ __raw_writeb(0x3, base+0x10e);
+ /* PIN = N19 GPIO.98->KBC6 mode 3 -DO- */
+ __raw_writeb(0x3, base+0x110);
+ /* PIN = J15 MDOC_nDMAREQ */
+ /* PIN = H19 GPIO.100->KBC2 mode 3 -DO- */
+ __raw_writeb(0x3, base+0x114);
+ /* PIN = W13, V12, P13, R13, W19, W16 ... */
+ /* PIN = AA17 sys_clkreq->bt_clk_req mode 0 */
+ }
+ }
+}
+
+
diff --git a/board/omap2420h4/platform.S b/board/omap2420h4/platform.S
new file mode 100644
index 0000000..3728e84
--- /dev/null
+++ b/board/omap2420h4/platform.S
@@ -0,0 +1,237 @@
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/omap2420.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/clocks.h>
+
+_TEXT_BASE:
+ .word TEXT_BASE /* sdram load addr from config.mk */
+
+#ifdef CONFIG_PARTIAL_SRAM
+
+/**************************************************************************
+ * cpy_clk_code: relocates clock code into SRAM where its safer to execute
+ * R1 = SRAM destination address.
+ *************************************************************************/
+.global cpy_clk_code
+ cpy_clk_code:
+ /* Copy DPLL code into SRAM */
+ adr r0, go_to_speed /* get addr of clock setting code */
+ mov r2, #384 /* r2 size to copy (div by 32 bytes) */
+ mov r1, r1 /* r1 <- dest address (passed in) */
+ add r2, r2, r0 /* r2 <- source end address */
+next2:
+ ldmia r0!, {r3-r10} /* copy from source address [r0] */
+ stmia r1!, {r3-r10} /* copy to target address [r1] */
+ cmp r0, r2 /* until source end address [r2] */
+ bne next2
+ mov pc, lr /* back to caller */
+
+/* ****************************************************************************
+ * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed
+ * -executed from SRAM.
+ * R0 = PRCM_CLKCFG_CTRL - addr of valid reg
+ * R1 = CM_CLKEN_PLL - addr dpll ctlr reg
+ * R2 = dpll value
+ * R3 = CM_IDLEST_CKGEN - addr dpll lock wait
+ ******************************************************************************/
+.global go_to_speed
+ go_to_speed:
+ sub sp, sp, #0x4 /* get some stack space */
+ str r4, [sp] /* save r4's value */
+
+ /* move into fast relock bypass */
+ ldr r8, pll_ctl_add
+ mov r4, #0x2
+ str r4, [r8]
+ ldr r4, pll_stat
+block:
+ ldr r8, [r4] /* wait for bypass to take effect */
+ and r8, r8, #0x3
+ cmp r8, #0x1
+ bne block
+
+ /* set new dpll dividers _after_ in bypass */
+ ldr r4, pll_div_add
+ ldr r8, pll_div_val
+ str r8, [r4]
+
+ /* now prepare GPMC (flash) for new dpll speed */
+ /* flash needs to be stable when we jump back to it */
+ ldr r4, cfg3_0_addr
+ ldr r8, cfg3_0_val
+ str r8, [r4]
+ ldr r4, cfg4_0_addr
+ ldr r8, cfg4_0_val
+ str r8, [r4]
+ ldr r4, cfg1_0_addr
+ ldr r8, [r4]
+ orr r8, r8, #0x3 /* up gpmc divider */
+ str r8, [r4]
+
+ /* setup to 2x loop though code. The first loop pre-loads the
+ * icache, the 2nd commits the prcm config, and locks the dpll
+ */
+ mov r4, #0x1000 /* spin spin spin */
+ mov r8, #0x4 /* first pass condition & set registers */
+ cmp r8, #0x4
+2:
+ ldrne r8, [r3] /* DPLL lock check */
+ and r8, r8, #0x7
+ cmp r8, #0x2
+ beq 4f
+3:
+ subeq r8, r8, #0x1
+ streq r8, [r0] /* commit dividers (2nd time) */
+ nop
+lloop1:
+ sub r4, r4, #0x1 /* Loop currently necessary else bad jumps */
+ nop
+ cmp r4, #0x0
+ bne lloop1
+ mov r4, #0x40000
+ cmp r8, #0x1
+ nop
+ streq r2, [r1] /* lock dpll (2nd time) */
+ nop
+lloop2:
+ sub r4, r4, #0x1 /* loop currently necessary else bad jumps */
+ nop
+ cmp r4, #0x0
+ bne lloop2
+ mov r4, #0x40000
+ cmp r8, #0x1
+ nop
+ ldreq r8, [r3] /* get lock condition for dpll */
+ cmp r8, #0x4 /* first time though? */
+ bne 2b
+ moveq r8, #0x2 /* set to dpll check condition. */
+ beq 3b /* if condition not true branch */
+4:
+ ldr r4, [sp]
+ add sp, sp, #0x4 /* return stack space */
+ mov pc, lr /* back to caller, locked */
+
+_go_to_speed: .word go_to_speed
+
+/* these constants need to be close for PIC code */
+cfg3_0_addr:
+ .word GPMC_CONFIG3_0
+cfg3_0_val:
+ .word H4_24XX_GPMC_CONFIG3_0
+cfg4_0_addr:
+ .word GPMC_CONFIG4_0
+cfg4_0_val:
+ .word H4_24XX_GPMC_CONFIG4_0
+cfg1_0_addr:
+ .word GPMC_CONFIG1_0
+pll_ctl_add:
+ .word CM_CLKEN_PLL
+pll_stat:
+ .word CM_IDLEST_CKGEN
+pll_div_add:
+ .word CM_CLKSEL1_PLL
+pll_div_val:
+ .word DPLL_VAL /* DPLL setting (300MHz default) */
+#endif
+
+.globl platformsetup
+platformsetup:
+ mov r3, r0 /* save skip information */
+#ifdef CONFIG_APTIX
+ ldr r0, REG_SDRC_MCFG_0
+ ldr r1, VAL_SDRC_MCFG_0
+ str r1, [r0]
+ ldr r0, REG_SDRC_MR_0
+ ldr r1, VAL_SDRC_MR_0
+ str r1, [r0]
+ /* a ddr needs emr1 set here */
+ ldr r0, REG_SDRC_SHARING
+ ldr r1, VAL_SDRC_SHARING
+ str r1, [r0]
+ ldr r0, REG_SDRC_RFR_CTRL_0
+ ldr r1, VAL_SDRC_RFR_CTRL_0
+ str r1, [r0]
+
+ /* little delay after init */
+ mov r2, #0x1800
+1:
+ subs r2, r2, #0x1
+ bne 1b
+#endif
+#ifdef CONFIG_PARTIAL_SRAM
+ ldr sp, SRAM_STACK
+ str ip, [sp] /* stash old link register */
+ mov ip, lr /* save link reg across call */
+ mov r0, r3 /* pass skip info to s_init */
+ bl s_init /* go setup pll,mux,memory */
+ ldr ip, [sp] /* restore save ip */
+ mov lr, ip /* restore link reg */
+#endif
+ /* map interrupt controller */
+ ldr r0, VAL_INTH_SETUP
+ mcr p15, 0, r0, c15, c2, 4
+
+ /* back to arch calling code */
+ mov pc, lr
+
+ /* the literal pools origin */
+ .ltorg
+
+REG_CONTROL_STATUS:
+ .word CONTROL_STATUS
+VAL_INTH_SETUP:
+ .word PERIFERAL_PORT_BASE
+SRAM_STACK:
+ .word LOW_LEVEL_SRAM_STACK
+
+#ifdef CONFIG_APTIX
+REG_SDRC_SHARING:
+ .word SDRC_SHARING
+REG_SDRC_MCFG_0:
+ .word SDRC_MCFG_0
+REG_SDRC_MR_0:
+ .word SDRC_MR_0
+REG_SDRC_RFR_CTRL_0:
+ .word SDRC_RFR_CTRL
+VAL_SDRC_SHARING:
+ .word VAL_H4_SDRC_SHARING
+VAL_SDRC_MCFG_0:
+ .word VAL_H4_SDRC_MCFG_0
+VAL_SDRC_MR_0:
+ .word VAL_H4_SDRC_MR_0
+VAL_SDRC_RFR_CTRL_0:
+ .word VAL_H4_SDRC_RFR_CTRL_0
+#endif
+
+
+
+
+
+
diff --git a/board/omap2420h4/sys_info.c b/board/omap2420h4/sys_info.c
new file mode 100644
index 0000000..b5fe9e3
--- /dev/null
+++ b/board/omap2420h4/sys_info.c
@@ -0,0 +1,202 @@
+/*
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/omap2420.h>
+#include <asm/io.h>
+#include <asm/arch/bits.h>
+#include <asm/arch/mem.h> /* get mem tables */
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/sys_info.h>
+#include <i2c.h>
+
+/**************************************************************************
+ * get_cpu_type() - low level get cpu type
+ * - no C globals yet.
+ * - just looking to say if this is a 2422 or 2420 or ...
+ * - to start with we will look at switch settings..
+ * - 2422 id's same as 2420 for ES1 will rely on H4 board characteristics
+ * (mux for 2420, non-mux for 2422).
+ ***************************************************************************/
+u32 get_cpu_type(void)
+{
+ u32 v;
+
+ v = __raw_readl(TAP_IDCODE_REG);
+ v &= CPU_24XX_ID_MASK;
+ if (v == CPU_2420_CHIPID) { /* currently 2420 and 2422 have same id */
+ if (is_gpmc_muxed() == GPMC_MUXED) /* if mux'ed */
+ return(CPU_2420);
+ else
+ return(CPU_2422);
+ } else
+ return(CPU_2420); /* don't know, say 2420 */
+}
+
+/******************************************
+ * get_cpu_rev(void) - extract version info
+ ******************************************/
+u32 get_cpu_rev(void)
+{
+ u32 v;
+ v = __raw_readl(TAP_IDCODE_REG);
+ v = v >> 28;
+ return(v+1); /* currently 2422 and 2420 match up */
+}
+
+/***********************************************************
+ * get_mem_type() - identify type of mDDR part used.
+ * 2422 uses stacked DDR, 2 parts CS0/CS1.
+ * 2420 may have 1 or 2, no good way to know...only init 1...
+ * when eeprom data is up we can select 1 more.
+ *************************************************************/
+u32 get_mem_type(void)
+{
+ if (get_cpu_type() == CPU_2422)
+ return(DDR_STACKED);
+
+ if (get_board_type() == BOARD_H4_MENELAUS)
+ return(DDR_COMBO);
+ else
+ return(DDR_DISCRETE);
+}
+
+/***********************************************************************
+ * get_board_type() - get board type based on current production stats.
+ * --- NOTE: 2 I2C EEPROMs will someday be populated with proper info.
+ * when they are available we can get info from there. This should
+ * be correct of all known boards up until today.
+ ************************************************************************/
+u32 get_board_type(void)
+{
+ if (i2c_probe(I2C_MENELAUS) == 0)
+ return(BOARD_H4_MENELAUS);
+ else
+ return(BOARD_H4_SDP);
+}
+
+/******************************************************************
+ * get_sysboot_value() - get init word settings (dip switch on h4)
+ ******************************************************************/
+u32 get_sysboot_value(void)
+{
+ return(0x00000FFF & __raw_readl(CONTROL_STATUS));
+}
+
+/***************************************************************************
+ * get_gpmc0_base() - Return current address hardware will be
+ * fetching from. The below effectively gives what is correct, its a bit
+ * mis-leading compared to the TRM. For the most general case the mask
+ * needs to be also taken into account this does work in practice.
+ * - for u-boot we currently map:
+ * -- 0 to nothing,
+ * -- 4 to flash
+ * -- 8 to enent
+ * -- c to wifi
+ ****************************************************************************/
+u32 get_gpmc0_base(void)
+{
+ u32 b;
+
+ b = __raw_readl(GPMC_CONFIG7_0);
+ b &= 0x1F; /* keep base [5:0] */
+ b = b << 24; /* ret 0x0b000000 */
+ return(b);
+}
+
+/*****************************************************************
+ * is_gpmc_muxed() - tells if address/data lines are multiplexed
+ *****************************************************************/
+u32 is_gpmc_muxed(void)
+{
+ u32 mux;
+ mux = get_sysboot_value();
+ if (mux & BIT1) /* if mux'ed */
+ return(GPMC_MUXED);
+ else
+ return(GPMC_NONMUXED);
+}
+
+/************************************************************************
+ * get_gpmc0_type() - read sysboot lines to see type of memory attached
+ ************************************************************************/
+u32 get_gpmc0_type(void)
+{
+ u32 type;
+ type = get_sysboot_value();
+ if ((type & (BIT3|BIT2)) == (BIT3|BIT2))
+ return(TYPE_NAND);
+ else
+ return(TYPE_NOR);
+}
+
+/*******************************************************************
+ * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand)
+ *******************************************************************/
+u32 get_gpmc0_width(void)
+{
+ u32 width;
+ width = get_sysboot_value();
+ if ((width & 0xF) == (BIT3|BIT2))
+ return(WIDTH_8BIT);
+ else
+ return(WIDTH_16BIT);
+}
+
+/*********************************************************************
+ * wait_on_value() - common routine to allow waiting for changes in
+ * volatile regs.
+ *********************************************************************/
+u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound)
+{
+ u32 i = 0, val;
+ do {
+ ++i;
+ val = __raw_readl(read_addr) & read_bit_mask;
+ if (val == match_value)
+ return(1);
+ if (i==bound)
+ return(0);
+ } while (1);
+}
+
+/*********************************************************************
+ * display_board_info() - print banner with board info.
+ *********************************************************************/
+void display_board_info(u32 btype)
+{
+ char cpu_2420[] = "2420";
+ char cpu_2422[] = "2422";
+ char db_men[] = "Menelaus";
+ char db_ip[]= "IP";
+ char *cpu_s, *db_s;
+ u32 cpu = get_cpu_type();
+
+ if(cpu == CPU_2420)
+ cpu_s = cpu_2420;
+ else
+ cpu_s = cpu_2422;
+ if(btype == BOARD_H4_MENELAUS)
+ db_s = db_men;
+ else
+ db_s = db_ip;
+ printf("TI H4 SDP Base Board with OMAP%s %s Daughter Board\n",cpu_s, db_s);
+}
diff --git a/board/omap2420h4/u-boot.lds b/board/omap2420h4/u-boot.lds
new file mode 100644
index 0000000..724c1dd
--- /dev/null
+++ b/board/omap2420h4/u-boot.lds
@@ -0,0 +1,58 @@
+/*
+ * January 2004 - Changed to support H4 device
+ * Copyright (c) 2004 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm1136/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}