summaryrefslogtreecommitdiff
path: root/board/quad100hd
diff options
context:
space:
mode:
Diffstat (limited to 'board/quad100hd')
-rw-r--r--board/quad100hd/Makefile8
-rw-r--r--board/quad100hd/nand.c53
-rw-r--r--board/quad100hd/quad100hd.c73
3 files changed, 0 insertions, 134 deletions
diff --git a/board/quad100hd/Makefile b/board/quad100hd/Makefile
deleted file mode 100644
index b65e5ad..0000000
--- a/board/quad100hd/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2007
-# Stefan Roese, DENX Software Engineering, sr@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = quad100hd.o nand.o
diff --git a/board/quad100hd/nand.c b/board/quad100hd/nand.c
deleted file mode 100644
index 47bbb6b..0000000
--- a/board/quad100hd/nand.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * (C) Copyright 2008
- * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <config.h>
-#if defined(CONFIG_CMD_NAND)
-#include <asm/ppc4xx-gpio.h>
-#include <asm/io.h>
-#include <nand.h>
-
-/*
- * hardware specific access to control-lines
- */
-static void quad100hd_hwcontrol(struct mtd_info *mtd,
- int cmd, unsigned int ctrl)
-{
- struct nand_chip *this = mtd->priv;
-
- if (ctrl & NAND_CTRL_CHANGE) {
- gpio_write_bit(CONFIG_SYS_NAND_CLE, !!(ctrl & NAND_CLE));
- gpio_write_bit(CONFIG_SYS_NAND_ALE, !!(ctrl & NAND_ALE));
- gpio_write_bit(CONFIG_SYS_NAND_CE, !(ctrl & NAND_NCE));
- }
-
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, this->IO_ADDR_W);
-}
-
-static int quad100hd_nand_ready(struct mtd_info *mtd)
-{
- return gpio_read_in_bit(CONFIG_SYS_NAND_RDY);
-}
-
-/*
- * Main initialization routine
- */
-int board_nand_init(struct nand_chip *nand)
-{
- /* Set address of hardware control function */
- nand->cmd_ctrl = quad100hd_hwcontrol;
- nand->dev_ready = quad100hd_nand_ready;
- nand->ecc.mode = NAND_ECC_SOFT;
- /* 15 us command delay time */
- nand->chip_delay = 20;
-
- /* Return happy */
- return 0;
-}
-#endif /* CONFIG_CMD_NAND */
diff --git a/board/quad100hd/quad100hd.c b/board/quad100hd/quad100hd.c
deleted file mode 100644
index bb14ca7..0000000
--- a/board/quad100hd/quad100hd.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * (C) Copyright 2008
- * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
- *
- * Based in part on board/icecube/icecube.c from PPCBoot
- * (C) Copyright 2003 Intrinsyc Software
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <malloc.h>
-#include <environment.h>
-#include <logbuff.h>
-#include <post.h>
-
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/ppc4xx-gpio.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
- /* taken from PPCBoot */
- mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
- mtdcr(UIC0ER, 0x00000000); /* disable all ints */
- mtdcr(UIC0CR, 0x00000000);
- mtdcr(UIC0PR, 0xFFFF7FFE); /* set int polarities */
- mtdcr(UIC0TR, 0x00000000); /* set int trigger levels */
- mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
- mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
-
- mtdcr(CPC0_SRR, 0x00040000); /* Hold PCI bridge in reset */
-
- return 0;
-}
-
-/*
- * Check Board Identity:
- */
-int checkboard(void)
-{
- char buf[64];
- int i = getenv_f("serial#", buf, sizeof(buf));
-#ifdef DISPLAY_BOARD_INFO
- sys_info_t sysinfo;
-#endif
-
- puts("Board: Quad100hd");
-
- if (i > 0) {
- puts(", serial# ");
- puts(buf);
- }
- putc('\n');
-
-#ifdef DISPLAY_BOARD_INFO
- /* taken from ppcboot */
- get_sys_info(&sysinfo);
-
- printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz);
- printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
- printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
- printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
- printf("\tEPB: %lu MHz\n", sysinfo.freqPLB / (sysinfo.pllExtBusDiv *
- 1000000));
- printf("\tPCI: %lu MHz\n", sysinfo.freqPCI / 1000000);
-#endif
-
- return 0;
-}