summaryrefslogtreecommitdiff
path: root/board/sandburst/common/sb_common.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/sandburst/common/sb_common.c')
-rw-r--r--board/sandburst/common/sb_common.c24
1 files changed, 12 insertions, 12 deletions
diff --git a/board/sandburst/common/sb_common.c b/board/sandburst/common/sb_common.c
index 51b1c75..f6ea16f 100644
--- a/board/sandburst/common/sb_common.c
+++ b/board/sandburst/common/sb_common.c
@@ -43,7 +43,7 @@ int sbcommon_get_master(void)
{
ppc440_gpio_regs_t *gpio_regs;
- gpio_regs = (ppc440_gpio_regs_t *)CFG_GPIO_BASE;
+ gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE;
if (gpio_regs->in & SBCOMMON_GPIO_PRI_N) {
return 0;
@@ -63,7 +63,7 @@ int sbcommon_secondary_present(void)
{
ppc440_gpio_regs_t *gpio_regs;
- gpio_regs = (ppc440_gpio_regs_t *)CFG_GPIO_BASE;
+ gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE;
if (gpio_regs->in & SBCOMMON_GPIO_SEC_PRES)
return 0;
@@ -84,7 +84,7 @@ unsigned short sbcommon_get_serial_number(void)
/* Get the board serial number from eeprom */
/* Initialize I2C */
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
/* Read 256 bytes in EEPROM */
i2c_read (0x50, 0, 1, buff, 0x100);
@@ -218,11 +218,11 @@ phys_size_t initdram (int board_type)
*
*
************************************************************************/
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
int testdram (void)
{
- uint *pstart = (uint *) CFG_MEMTEST_START;
- uint *pend = (uint *) CFG_MEMTEST_END;
+ uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+ uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
uint *p;
printf("Testing SDRAM: ");
@@ -340,7 +340,7 @@ int pci_pre_init(struct pci_controller * hose )
* may not be sufficient for a given board.
*
************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller * hose )
{
/*--------------------------------------------------------------------------+
@@ -355,7 +355,7 @@ void pci_target_init(struct pci_controller * hose )
* Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
* options to not support sizes such as 128/256 MB.
*--------------------------------------------------------------------------*/
- out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+ out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
out32r( PCIX0_PIM0LAH, 0 );
out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
@@ -364,12 +364,12 @@ void pci_target_init(struct pci_controller * hose )
/*--------------------------------------------------------------------------+
* Program the board's subsystem id/vendor id
*--------------------------------------------------------------------------*/
- out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
- out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+ out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+ out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
/*************************************************************************
@@ -405,7 +405,7 @@ void board_get_enetaddr (uchar * enet)
if (0 == macaddr_idx) {
/* Initialize I2C */
- i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
/* Read 256 bytes in EEPROM */
i2c_read (0x50, 0, 1, buff, 0x100);