summaryrefslogtreecommitdiff
path: root/board/tqc/tqm5200/tqm5200.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/tqc/tqm5200/tqm5200.c')
-rw-r--r--board/tqc/tqm5200/tqm5200.c58
1 files changed, 29 insertions, 29 deletions
diff --git a/board/tqc/tqm5200/tqm5200.c b/board/tqc/tqm5200/tqm5200.c
index 5152331..faa2e02 100644
--- a/board/tqc/tqm5200/tqm5200.c
+++ b/board/tqc/tqm5200/tqm5200.c
@@ -54,7 +54,7 @@ DECLARE_GLOBAL_DATA_PTR;
void ps2mult_early_init(void);
#endif
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
static void sdram_start (int hi_addr)
{
long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -101,7 +101,7 @@ static void sdram_start (int hi_addr)
/*
* ATTENTION: Although partially referenced initdram does NOT make real use
- * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
* is something else than 0x00000000.
*/
@@ -111,7 +111,7 @@ phys_size_t initdram (int board_type)
ulong dramsize2 = 0;
uint svr, pvr;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
ulong test1, test2;
/* setup SDRAM chip selects */
@@ -132,9 +132,9 @@ phys_size_t initdram (int board_type)
/* find RAM size using SDRAM CS0 only */
sdram_start(0);
- test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
+ test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
sdram_start(1);
- test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x20000000);
+ test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
if (test1 > test2) {
sdram_start(0);
dramsize = test1;
@@ -161,10 +161,10 @@ phys_size_t initdram (int board_type)
/* find RAM size using SDRAM CS1 only */
if (!dramsize)
sdram_start(0);
- test2 = test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x20000000);
+ test2 = test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x20000000);
if (!dramsize) {
sdram_start(1);
- test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x20000000);
+ test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x20000000);
}
if (test1 > test2) {
sdram_start(0);
@@ -186,7 +186,7 @@ phys_size_t initdram (int board_type)
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
}
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
/* retrieve size of memory connected to SDRAM CS0 */
dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
@@ -203,7 +203,7 @@ phys_size_t initdram (int board_type)
} else {
dramsize2 = 0;
}
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
/*
* On MPC5200B we need to set the special configuration delay in the
@@ -406,7 +406,7 @@ int board_early_init_r (void)
ps2mult_early_init();
#endif /* CONFIG_PS2MULT */
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
/* Low level USB init, required for proper kernel operation */
usb_cpu_init();
#endif
@@ -464,34 +464,34 @@ int last_stage_init (void)
*/
/* save original SRAM content */
- save = *(volatile u16 *)CFG_CS2_START;
+ save = *(volatile u16 *)CONFIG_SYS_CS2_START;
restore = 1;
/* write test pattern to SRAM */
- *(volatile u16 *)CFG_CS2_START = 0xA5A5;
+ *(volatile u16 *)CONFIG_SYS_CS2_START = 0xA5A5;
__asm__ volatile ("sync");
/*
* Put a different pattern on the data lines: otherwise they may float
* long enough to read back what we wrote.
*/
- tmp = *(volatile u16 *)CFG_FLASH_BASE;
+ tmp = *(volatile u16 *)CONFIG_SYS_FLASH_BASE;
if (tmp == 0xA5A5)
puts ("!! possible error in SRAM detection\n");
- if (*(volatile u16 *)CFG_CS2_START != 0xA5A5) {
+ if (*(volatile u16 *)CONFIG_SYS_CS2_START != 0xA5A5) {
/* no SRAM at all, disable cs */
*(vu_long *)MPC5XXX_ADDECR &= ~(1 << 18);
*(vu_long *)MPC5XXX_CS2_START = 0x0000FFFF;
*(vu_long *)MPC5XXX_CS2_STOP = 0x0000FFFF;
restore = 0;
__asm__ volatile ("sync");
- } else if (*(volatile u16 *)(CFG_CS2_START + (1<<19)) == 0xA5A5) {
+ } else if (*(volatile u16 *)(CONFIG_SYS_CS2_START + (1<<19)) == 0xA5A5) {
/* make sure that we access a mirrored address */
- *(volatile u16 *)CFG_CS2_START = 0x1111;
+ *(volatile u16 *)CONFIG_SYS_CS2_START = 0x1111;
__asm__ volatile ("sync");
- if (*(volatile u16 *)(CFG_CS2_START + (1<<19)) == 0x1111) {
+ if (*(volatile u16 *)(CONFIG_SYS_CS2_START + (1<<19)) == 0x1111) {
/* SRAM size = 512 kByte */
- *(vu_long *)MPC5XXX_CS2_STOP = STOP_REG(CFG_CS2_START,
+ *(vu_long *)MPC5XXX_CS2_STOP = STOP_REG(CONFIG_SYS_CS2_START,
0x80000);
__asm__ volatile ("sync");
puts ("SRAM: 512 kB\n");
@@ -503,7 +503,7 @@ int last_stage_init (void)
}
/* restore origianl SRAM content */
if (restore) {
- *(volatile u16 *)CFG_CS2_START = save;
+ *(volatile u16 *)CONFIG_SYS_CS2_START = save;
__asm__ volatile ("sync");
}
@@ -513,21 +513,21 @@ int last_stage_init (void)
*/
/* save origianl FB content */
- save = *(volatile u16 *)CFG_CS1_START;
+ save = *(volatile u16 *)CONFIG_SYS_CS1_START;
restore = 1;
/* write test pattern to FB memory */
- *(volatile u16 *)CFG_CS1_START = 0xA5A5;
+ *(volatile u16 *)CONFIG_SYS_CS1_START = 0xA5A5;
__asm__ volatile ("sync");
/*
* Put a different pattern on the data lines: otherwise they may float
* long enough to read back what we wrote.
*/
- tmp = *(volatile u16 *)CFG_FLASH_BASE;
+ tmp = *(volatile u16 *)CONFIG_SYS_FLASH_BASE;
if (tmp == 0xA5A5)
puts ("!! possible error in grafic controller detection\n");
- if (*(volatile u16 *)CFG_CS1_START != 0xA5A5) {
+ if (*(volatile u16 *)CONFIG_SYS_CS1_START != 0xA5A5) {
/* no grafic controller at all, disable cs */
*(vu_long *)MPC5XXX_ADDECR &= ~(1 << 17);
*(vu_long *)MPC5XXX_CS1_START = 0x0000FFFF;
@@ -539,7 +539,7 @@ int last_stage_init (void)
}
/* restore origianl FB content */
if (restore) {
- *(volatile u16 *)CFG_CS1_START = save;
+ *(volatile u16 *)CONFIG_SYS_CS1_START = save;
__asm__ volatile ("sync");
}
@@ -679,21 +679,21 @@ unsigned int board_video_init (void)
*/
/* save origianl FB content */
- save = *(volatile u16 *)CFG_CS1_START;
+ save = *(volatile u16 *)CONFIG_SYS_CS1_START;
restore = 1;
/* write test pattern to FB memory */
- *(volatile u16 *)CFG_CS1_START = 0xA5A5;
+ *(volatile u16 *)CONFIG_SYS_CS1_START = 0xA5A5;
__asm__ volatile ("sync");
/*
* Put a different pattern on the data lines: otherwise they may float
* long enough to read back what we wrote.
*/
- tmp = *(volatile u16 *)CFG_FLASH_BASE;
+ tmp = *(volatile u16 *)CONFIG_SYS_FLASH_BASE;
if (tmp == 0xA5A5)
puts ("!! possible error in grafic controller detection\n");
- if (*(volatile u16 *)CFG_CS1_START != 0xA5A5) {
+ if (*(volatile u16 *)CONFIG_SYS_CS1_START != 0xA5A5) {
/* no grafic controller found */
restore = 0;
ret = 0;
@@ -702,7 +702,7 @@ unsigned int board_video_init (void)
}
if (restore) {
- *(volatile u16 *)CFG_CS1_START = save;
+ *(volatile u16 *)CONFIG_SYS_CS1_START = save;
__asm__ volatile ("sync");
}
return ret;