summaryrefslogtreecommitdiff
path: root/board/tqc/tqm8260/tqm8260.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/tqc/tqm8260/tqm8260.c')
-rw-r--r--board/tqc/tqm8260/tqm8260.c46
1 files changed, 23 insertions, 23 deletions
diff --git a/board/tqc/tqm8260/tqm8260.c b/board/tqc/tqm8260/tqm8260.c
index f201045..3039999 100644
--- a/board/tqc/tqm8260/tqm8260.c
+++ b/board/tqc/tqm8260/tqm8260.c
@@ -236,7 +236,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
*/
maxsize = (1 + (~orx | 0x7fff)) / 2;
- /* Since CFG_SDRAM_BASE is always 0 (??), we assume that
+ /* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that
* we are configuring CS1 if base != 0
*/
sdmr_ptr = base ? &memctl->memc_lsdmr : &memctl->memc_psdmr;
@@ -261,7 +261,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
* accessing the SDRAM with a single-byte transaction."
*
* The appropriate BRx/ORx registers have already been set when we
- * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+ * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
*/
*sdmr_ptr = sdmr | PSDMR_OP_PREA;
@@ -272,7 +272,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
*base = c;
*sdmr_ptr = sdmr | PSDMR_OP_MRW;
- *(base + CFG_MRS_OFFS) = c; /* setting MR on address lines */
+ *(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */
*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
*base = c;
@@ -285,10 +285,10 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
phys_size_t initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
long size8, size9;
#endif
long psize, lsize;
@@ -296,8 +296,8 @@ phys_size_t initdram (int board_type)
psize = 16 * 1024 * 1024;
lsize = 0;
- memctl->memc_psrt = CFG_PSRT;
- memctl->memc_mptpr = CFG_MPTPR;
+ memctl->memc_psrt = CONFIG_SYS_PSRT;
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR;
#if 0 /* Just for debugging */
#define prt_br_or(brX,orX) do { \
@@ -315,37 +315,37 @@ phys_size_t initdram (int board_type)
prt_br_or (br3, or3);
#endif
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
/* 60x SDRAM setup:
*/
- size8 = try_init (memctl, CFG_PSDMR_8COL, CFG_OR1_8COL,
- (uchar *) CFG_SDRAM_BASE);
- size9 = try_init (memctl, CFG_PSDMR_9COL, CFG_OR1_9COL,
- (uchar *) CFG_SDRAM_BASE);
+ size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
+ (uchar *) CONFIG_SYS_SDRAM_BASE);
+ size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR1_9COL,
+ (uchar *) CONFIG_SYS_SDRAM_BASE);
if (size8 < size9) {
psize = size9;
printf ("(60x:9COL - %ld MB, ", psize >> 20);
} else {
- psize = try_init (memctl, CFG_PSDMR_8COL, CFG_OR1_8COL,
- (uchar *) CFG_SDRAM_BASE);
+ psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
+ (uchar *) CONFIG_SYS_SDRAM_BASE);
printf ("(60x:8COL - %ld MB, ", psize >> 20);
}
/* Local SDRAM setup:
*/
-#ifdef CFG_INIT_LOCAL_SDRAM
- memctl->memc_lsrt = CFG_LSRT;
- size8 = try_init (memctl, CFG_LSDMR_8COL, CFG_OR2_8COL,
+#ifdef CONFIG_SYS_INIT_LOCAL_SDRAM
+ memctl->memc_lsrt = CONFIG_SYS_LSRT;
+ size8 = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL,
(uchar *) SDRAM_BASE2_PRELIM);
- size9 = try_init (memctl, CFG_LSDMR_9COL, CFG_OR2_9COL,
+ size9 = try_init (memctl, CONFIG_SYS_LSDMR_9COL, CONFIG_SYS_OR2_9COL,
(uchar *) SDRAM_BASE2_PRELIM);
if (size8 < size9) {
lsize = size9;
printf ("Local:9COL - %ld MB) using ", lsize >> 20);
} else {
- lsize = try_init (memctl, CFG_LSDMR_8COL, CFG_OR2_8COL,
+ lsize = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL,
(uchar *) SDRAM_BASE2_PRELIM);
printf ("Local:8COL - %ld MB) using ", lsize >> 20);
}
@@ -354,11 +354,11 @@ phys_size_t initdram (int board_type)
/* Set up BR2 so that the local SDRAM goes
* right after the 60x SDRAM
*/
- memctl->memc_br2 = (CFG_BR2_PRELIM & ~BRx_BA_MSK) |
- (CFG_SDRAM_BASE + psize);
+ memctl->memc_br2 = (CONFIG_SYS_BR2_PRELIM & ~BRx_BA_MSK) |
+ (CONFIG_SYS_SDRAM_BASE + psize);
#endif
-#endif /* CFG_INIT_LOCAL_SDRAM */
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_INIT_LOCAL_SDRAM */
+#endif /* CONFIG_SYS_RAMBOOT */
icache_enable ();