diff options
Diffstat (limited to 'board/xilinx/ml300/sw_services/uboot_v1_00_a')
3 files changed, 77 insertions, 32 deletions
diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes index 319b925..9daf147 100644 --- a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes +++ b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes @@ -1,41 +1,55 @@ #!/bin/bash -if[$ -# -ne 1 ] - then echo "usage: Ltypes filename" > &2 exit 2 fi FILE = "$1" +if [ $# -ne 1 ] +then + echo "usage: Ltypes filename" >&2 + exit 2 +fi + +FILE="$1" #TMPFILE='mktemp "${FILE}.XXXXXX"' || exit 1 - TMPFILE = $ { - FILE} +TMPFILE=${FILE}.`date "+%s"` +touch $TMPFILE || exit 1 - . ` date "+%s" ` touch $TMPFILE || exit 1 # Change all the Xilinx types to Linux types and put the result into a temp file - sed - - e 's/\bXTRUE\b/TRUE/g' - - e 's/\bXFALSE\b/FALSE/g' - - e 's/\bXNULL\b/NULL/g' - - e 's/<asm/delay.h>/<asm\/delay.h>/g' - - e 's/\bXENV_USLEEP\b/udelay/g' - - e 's/\bXuint8\b/u8/g' - - e 's/\bXuint16\b/u16/g' - - e 's/\bXuint32\b/u32/g' - - e 's/\bXint8\b/s8/g' - - e 's/\bXint16\b/s16/g' - - e 's/\bXint32\b/s32/g' - e 's/\bXboolean\b/u32/g' "${FILE}" > "${TMPFILE}" +sed \ + -e 's/\bXTRUE\b/TRUE/g' \ + -e 's/\bXFALSE\b/FALSE/g' \ + -e 's/\bXNULL\b/NULL/g' \ + -e 's/"xenv.h"/<asm\/delay.h>/g' \ + -e 's/\bXENV_USLEEP\b/udelay/g' \ + -e 's/\bXuint8\b/u8/g' \ + -e 's/\bXuint16\b/u16/g' \ + -e 's/\bXuint32\b/u32/g' \ + -e 's/\bXint8\b/s8/g' \ + -e 's/\bXint16\b/s16/g' \ + -e 's/\bXint32\b/s32/g' \ + -e 's/\bXboolean\b/u32/g' \ + "${FILE}" > "${TMPFILE}" + # Overlay the original file with the temp file - mv "${TMPFILE}" "${FILE}" +mv "${TMPFILE}" "${FILE}" + # Are we doing xbasic_types.h? - if["${FILE##*/}" = xbasic_types.h] - then -# Remember as you're reading this that we've already gone through the prior -# sed script. We need to do some other things to xbasic_types.h: -# 1) Add ifndefs around TRUE and FALSE defines -# 2) Remove definition of NULL as NULL -# 3) Replace most of the primitive types section with a #include - sed - e '/u32 true/,/#define false/Ic\ +if [ "${FILE##*/}" = xbasic_types.h ] +then + # Remember as you're reading this that we've already gone through the prior + # sed script. We need to do some other things to xbasic_types.h: + # 1) Add ifndefs around TRUE and FALSE defines + # 2) Remove definition of NULL as NULL + # 3) Replace most of the primitive types section with a #include + sed \ + -e '/u32 true/,/#define false/Ic\ #ifndef TRUE\ #define TRUE 1\ #endif\ #ifndef FALSE\ #define FALSE 0\ -#endif' - e '/#define[[:space:]][[:space:]]*NULL[[:space:]][[:space:]]*NULL/d' - e '/typedef[[:space:]][[:space:]]*unsigned[[:space:]][[:space:]]*char[[:space:]][[:space:]]*u8/,/typedef[[:space:]][[:space:]]*unsigned[[:space:]][[:space:]]*long[[:space:]][[:space:]]*u32.*boolean/c\ -#include <linux/types.h>' "${FILE}" > "${TMPFILE}" mv "${TMPFILE}" "${FILE}" fi +#endif' \ + -e '/#define[[:space:]][[:space:]]*NULL[[:space:]][[:space:]]*NULL/d' \ + -e '/typedef[[:space:]][[:space:]]*unsigned[[:space:]][[:space:]]*char[[:space:]][[:space:]]*u8/,/typedef[[:space:]][[:space:]]*unsigned[[:space:]][[:space:]]*long[[:space:]][[:space:]]*u32.*boolean/c\ +#include <linux/types.h>' \ + "${FILE}" > "${TMPFILE}" + + mv "${TMPFILE}" "${FILE}" +fi diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld index e1aa7fd..5169241 100644 --- a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld +++ b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld @@ -42,7 +42,11 @@ BEGIN ARRAY connected_periphs PROPERTY desc = "Peripherals connected to U-Boot"; PROPERTY size = 0; PARAM name = periph_name, desc = "Name of Peripheral connected", type = string; END ARRAY - PARAMETER name = TARGET_DIR, desc = - "Target Directory for U-Boot BSP", type = string; + PARAMETER name = TARGET_DIR, desc = "Target Directory for U-Boot BSP", type = string; + +# location of persistent storage in the IIC EEPROM (defaults are set for ML300) +PARAMETER name = IIC_PERSISTENT_BASEADDR, desc = "Start of persistent storage block in the EEPROM address space", type = int, default = 1024; +PARAMETER name = IIC_PERSISTENT_HIGHADDR, desc = "End of persistent storage block in the EEPROM address space", type = int, default = 2047; +PARAMETER name = IIC_PERSISTENT_EEPROMADDR, desc = "Address of the EEPROM on the IIC bus", type = int, default = 0xA0; END LIBRARY diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl index 8d939b4..9d44f44 100644 --- a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl +++ b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl @@ -76,12 +76,18 @@ proc generate {libname} { xredefine_uartns550 $drv "xparameters.h" } elseif {[string compare -nocase $drvname "emac"] == 0} { xredefine_emac $drv "xparameters.h" + } elseif {[string compare -nocase $drvname "iic"] == 0} { + xredefine_iic $drv "xparameters.h" } } } # define core_clock xredefine_params $libname "xparameters.h" "CORE_CLOCK_FREQ_HZ" + + # define the values for the persistent storage in IIC + xredefine_params $libname "xparameters.h" "IIC_PERSISTENT_BASEADDR" "IIC_PERSISTENT_HIGHADDR" "IIC_PERSISTENT_EEPROMADDR" + } proc xget_corefreq {} { @@ -117,7 +123,16 @@ proc xredefine_params {handle file_name args} { if {$value != ""} { set value [xformat_addr_string $value $arg] - set name [string toupper $arg] + + if {[string compare -nocase $arg "IIC_PERSISTENT_BASEADDR"] == 0} { + set name "PERSISTENT_0_IIC_0_BASEADDR" + } elseif {[string compare -nocase $arg "IIC_PERSISTENT_HIGHADDR"] == 0} { + set name "PERSISTENT_0_IIC_0_HIGHADDR" + } elseif {[string compare -nocase $arg "IIC_PERSISTENT_EEPROMADDR"] == 0} { + set name "PERSISTENT_0_IIC_0_EEPROMADDR" + } else { + set name [string toupper $arg] + } set name [format "XPAR_%s" $name] puts $file_handle "#define $name $value" } @@ -140,6 +155,11 @@ proc xredefine_emac {drvhandle file_name} { } +proc xredefine_iic {drvhandle file_name} { + xredefine_include_file $drvhandle $file_name "iic" "C_BASEADDR" "C_HIGHADDR" "C_TEN_BIT_ADR" "DEVICE_ID" + +} + ####################### proc xredefine_include_file {drv_handle file_name drv_string args} { @@ -221,6 +241,8 @@ proc post_generate {lib_handle} { if {[string compare -nocase $drvname "emac"] == 0} { xcopy_emac $drv $dirname + } elseif {[string compare -nocase $drvname "iic"] == 0} { + xcopy_iic $drv $dirname } } @@ -267,6 +289,11 @@ proc xcopy_emac {drv_handle dirname} { xcopy_dir $dirname $emac } +proc xcopy_iic {drv_handle dirname} { + set iic "board/xilinx/xilinx_iic" + xcopy_dir $dirname $iic +} + proc xcopy_dir {srcdir dstdir} { set dstdirname [format "%s%s" "uboot/" $dstdir] |