summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/netta/codec.c291
-rw-r--r--board/omap5912osk/Makefile47
-rw-r--r--board/omap5912osk/config.mk30
-rw-r--r--board/omap5912osk/flash.c507
-rw-r--r--board/omap5912osk/omap5912osk.c294
-rw-r--r--board/omap5912osk/platform.S442
-rw-r--r--board/omap5912osk/u-boot.lds51
-rw-r--r--board/omap730p2/omap730p2.c44
-rw-r--r--board/omap730p2/platform.S4
-rw-r--r--board/rmu/rmu.c2
10 files changed, 1546 insertions, 166 deletions
diff --git a/board/netta/codec.c b/board/netta/codec.c
index fb2dab8..01ab14b 100644
--- a/board/netta/codec.c
+++ b/board/netta/codec.c
@@ -38,8 +38,8 @@
#define PCM_RESYNC_CMD_CH_A 0x42
#define PCM_RESYNC_CMD_CH_B 0x4A
-#define ACTIVE_HOOK_LEV_4 0
-#define ACTIVE_HOOK_LEV_12 1
+#define ACTIVE_HOOK_LEV_4 0
+#define ACTIVE_HOOK_LEV_12 1
#define SLIC_P_NORMAL 0x01
@@ -140,17 +140,17 @@
#define CIS_DAT_ADDR 0x00
-#define LEC_LEN_ADDR 0x3A
-#define LEC_POWR_ADDR 0x3B
-#define LEC_DELP_ADDR 0x3C
-#define LEC_DELQ_ADDR 0x3D
-#define LEC_GAIN_XI_ADDR 0x3E
-#define LEC_GAIN_RI_ADDR 0x3F
-#define LEC_GAIN_XO_ADDR 0x40
-#define LEC_RES_1_ADDR 0x41
+#define LEC_LEN_ADDR 0x3A
+#define LEC_POWR_ADDR 0x3B
+#define LEC_DELP_ADDR 0x3C
+#define LEC_DELQ_ADDR 0x3D
+#define LEC_GAIN_XI_ADDR 0x3E
+#define LEC_GAIN_RI_ADDR 0x3F
+#define LEC_GAIN_XO_ADDR 0x40
+#define LEC_RES_1_ADDR 0x41
#define LEC_RES_2_ADDR 0x42
-#define NLP_POW_LPF_ADDR 0x30
+#define NLP_POW_LPF_ADDR 0x30
#define NLP_POW_LPS_ADDR 0x31
#define NLP_BN_LEV_X_ADDR 0x32
#define NLP_BN_LEV_R_ADDR 0x33
@@ -170,18 +170,18 @@
#define NLP_CT_LEV_RE_ADDR 0x41
#define NLP_CTRL_ADDR 0x42
-#define UTD_CF_H_ADDR 0x4B
-#define UTD_CF_L_ADDR 0x4C
-#define UTD_BW_H_ADDR 0x4D
-#define UTD_BW_L_ADDR 0x4E
-#define UTD_NLEV_ADDR 0x4F
-#define UTD_SLEV_H_ADDR 0x50
-#define UTD_SLEV_L_ADDR 0x51
-#define UTD_DELT_ADDR 0x52
-#define UTD_RBRK_ADDR 0x53
-#define UTD_RTIME_ADDR 0x54
-#define UTD_EBRK_ADDR 0x55
-#define UTD_ETIME_ADDR 0x56
+#define UTD_CF_H_ADDR 0x4B
+#define UTD_CF_L_ADDR 0x4C
+#define UTD_BW_H_ADDR 0x4D
+#define UTD_BW_L_ADDR 0x4E
+#define UTD_NLEV_ADDR 0x4F
+#define UTD_SLEV_H_ADDR 0x50
+#define UTD_SLEV_L_ADDR 0x51
+#define UTD_DELT_ADDR 0x52
+#define UTD_RBRK_ADDR 0x53
+#define UTD_RTIME_ADDR 0x54
+#define UTD_EBRK_ADDR 0x55
+#define UTD_ETIME_ADDR 0x56
#define DTMF_LEV_ADDR 0x30
#define DTMF_TWI_ADDR 0x31
@@ -205,45 +205,45 @@
/*=====================================*/
-#define HOOK_LEV_ACT_START_ADDR 0x89
+#define HOOK_LEV_ACT_START_ADDR 0x89
#define RO1_START_ADDR 0x70
#define RO2_START_ADDR 0x95
#define RO3_START_ADDR 0x96
#define TG1_FREQ_START_ADDR 0x38
#define TG1_GAIN_START_ADDR 0x39
-#define TG1_BANDPASS_START_ADDR 0x3B
+#define TG1_BANDPASS_START_ADDR 0x3B
#define TG1_BANDPASS_END_ADDR 0x3D
#define TG2_FREQ_START_ADDR 0x40
#define TG2_GAIN_START_ADDR 0x41
-#define TG2_BANDPASS_START_ADDR 0x43
+#define TG2_BANDPASS_START_ADDR 0x43
#define TG2_BANDPASS_END_ADDR 0x45
/*====================================*/
-#define PCM_HW_B 0x80
+#define PCM_HW_B 0x80
#define PCM_HW_A 0x00
-#define PCM_TIME_SLOT_0 0x00 /* Byte 0 of PCM Frame (by default is assigned to channel A ) */
-#define PCM_TIME_SLOT_1 0x01 /* Byte 1 of PCM Frame (by default is assigned to channel B ) */
-#define PCM_TIME_SLOT_4 0x04 /* Byte 4 of PCM Frame (Corresponds to B1 of the Second GCI ) */
+#define PCM_TIME_SLOT_0 0x00 /* Byte 0 of PCM Frame (by default is assigned to channel A ) */
+#define PCM_TIME_SLOT_1 0x01 /* Byte 1 of PCM Frame (by default is assigned to channel B ) */
+#define PCM_TIME_SLOT_4 0x04 /* Byte 4 of PCM Frame (Corresponds to B1 of the Second GCI ) */
#define RX_LEV_ADDR 0x28
#define TX_LEV_ADDR 0x30
-#define Ik1_ADDR 0x83
+#define Ik1_ADDR 0x83
-#define AR_ROW 3 /* Is the row (AR Params) of the ac_Coeff array in SMS_CODEC_Defaults struct */
-#define AX_ROW 6 /* Is the row (AX Params) of the ac_Coeff array in SMS_CODEC_Defaults struct */
-#define DCF_ROW 0 /* Is the row (DCF Params) of the dc_Coeff array in SMS_CODEC_Defaults struct */
+#define AR_ROW 3 /* Is the row (AR Params) of the ac_Coeff array in SMS_CODEC_Defaults struct */
+#define AX_ROW 6 /* Is the row (AX Params) of the ac_Coeff array in SMS_CODEC_Defaults struct */
+#define DCF_ROW 0 /* Is the row (DCF Params) of the dc_Coeff array in SMS_CODEC_Defaults struct */
/* Mark the start byte of Duslic parameters that we use with configurator */
-#define Ik1_START_BYTE 3
+#define Ik1_START_BYTE 3
#define RX_LEV_START_BYTE 0
#define TX_LEV_START_BYTE 0
/************************************************/
-#define INTREG4_CIS_ACT (1 << 0)
+#define INTREG4_CIS_ACT (1 << 0)
#define BCR1_SLEEP 0x20
#define BCR1_REVPOL 0x10
@@ -257,30 +257,30 @@
#define BCR2_HIMAN 0x08
#define BCR2_PDOT 0x01
-#define BCR3_PCMX_EN (1 << 4)
-
-#define BCR5_DTMF_EN (1 << 0)
-#define BCR5_DTMF_SRC (1 << 1)
-#define BCR5_LEC_EN (1 << 2)
-#define BCR5_LEC_OUT (1 << 3)
-#define BCR5_CIS_EN (1 << 4)
-#define BCR5_CIS_AUTO (1 << 5)
-#define BCR5_UTDX_EN (1 << 6)
-#define BCR5_UTDR_EN (1 << 7)
-
-#define DSCR_TG1_EN (1 << 0)
-#define DSCR_TG2_EN (1 << 1)
-#define DSCR_PTG (1 << 2)
-#define DSCR_COR8 (1 << 3)
-#define DSCR_DG_KEY(x) (((x) & 0x0F) << 4)
-
-#define CIS_LEC_MODE_CIS_V23 (1 << 0)
-#define CIS_LEC_MODE_CIS_FRM (1 << 1)
-#define CIS_LEC_MODE_NLP_EN (1 << 2)
-#define CIS_LEC_MODE_UTDR_SUM (1 << 4)
-#define CIS_LEC_MODE_UTDX_SUM (1 << 5)
+#define BCR3_PCMX_EN (1 << 4)
+
+#define BCR5_DTMF_EN (1 << 0)
+#define BCR5_DTMF_SRC (1 << 1)
+#define BCR5_LEC_EN (1 << 2)
+#define BCR5_LEC_OUT (1 << 3)
+#define BCR5_CIS_EN (1 << 4)
+#define BCR5_CIS_AUTO (1 << 5)
+#define BCR5_UTDX_EN (1 << 6)
+#define BCR5_UTDR_EN (1 << 7)
+
+#define DSCR_TG1_EN (1 << 0)
+#define DSCR_TG2_EN (1 << 1)
+#define DSCR_PTG (1 << 2)
+#define DSCR_COR8 (1 << 3)
+#define DSCR_DG_KEY(x) (((x) & 0x0F) << 4)
+
+#define CIS_LEC_MODE_CIS_V23 (1 << 0)
+#define CIS_LEC_MODE_CIS_FRM (1 << 1)
+#define CIS_LEC_MODE_NLP_EN (1 << 2)
+#define CIS_LEC_MODE_UTDR_SUM (1 << 4)
+#define CIS_LEC_MODE_UTDX_SUM (1 << 5)
#define CIS_LEC_MODE_LEC_FREEZE (1 << 6)
-#define CIS_LEC_MODE_LEC_ADAPT (1 << 7)
+#define CIS_LEC_MODE_LEC_ADAPT (1 << 7)
#define TSTR4_COR_64 (1 << 5)
@@ -290,12 +290,12 @@
#define LMCR1_TEST_EN (1 << 7)
-#define LMCR1_LM_EN (1 << 6)
+#define LMCR1_LM_EN (1 << 6)
#define LMCR1_LM_THM (1 << 5)
-#define LMCR1_LM_ONCE (1 << 2)
+#define LMCR1_LM_ONCE (1 << 2)
#define LMCR1_LM_MASK (1 << 1)
-#define LMCR2_LM_RECT (1 << 5)
+#define LMCR2_LM_RECT (1 << 5)
#define LMCR2_LM_SEL_VDD 0x0D
#define LMCR2_LM_SEL_IO3 0x0A
#define LMCR2_LM_SEL_IO4 0x0B
@@ -313,27 +313,27 @@
/************************************************/
#define TARGET_ONHOOK_BATH_x100 4600 /* 46.0 Volt */
-#define TARGET_ONHOOK_BATL_x100 2500 /* 25.0 Volt */
+#define TARGET_ONHOOK_BATL_x100 2500 /* 25.0 Volt */
#define TARGET_V_DIVIDER_RATIO_x100 21376L /* (R1+R2)/R2 = 213.76 */
#define DIVIDER_RATIO_ACCURx100 (22 * 100)
#define V_AD_x10000 10834L /* VAD = 1.0834 */
#define TARGET_VDDx100 330 /* VDD = 3.3 * 10 */
#define VDD_MAX_DIFFx100 20 /* VDD Accur = 0.2*100 */
-#define RMS_MULTIPLIERx100 111 /* pi/(2xsqrt(2)) = 1.11*/
-#define K_INTDC_RECT_ON 4 /* When Rectifier is ON this value is necessary(2^4) */
-#define K_INTDC_RECT_OFF 2 /* 2^2 */
-#define RNG_FREQ 25
-#define SAMPLING_FREQ (2000L)
-#define N_SAMPLES (SAMPLING_FREQ/RNG_FREQ) /* for Ring Freq =25Hz (40ms Integration Period)[Sampling rate 2KHz -->1 Sample every 500us] */
-#define HOOK_THRESH_RING_START_ADDR 0x8B
-#define RING_PARAMS_START_ADDR 0x70
+#define RMS_MULTIPLIERx100 111 /* pi/(2xsqrt(2)) = 1.11*/
+#define K_INTDC_RECT_ON 4 /* When Rectifier is ON this value is necessary(2^4) */
+#define K_INTDC_RECT_OFF 2 /* 2^2 */
+#define RNG_FREQ 25
+#define SAMPLING_FREQ (2000L)
+#define N_SAMPLES (SAMPLING_FREQ/RNG_FREQ) /* for Ring Freq =25Hz (40ms Integration Period)[Sampling rate 2KHz -->1 Sample every 500us] */
+#define HOOK_THRESH_RING_START_ADDR 0x8B
+#define RING_PARAMS_START_ADDR 0x70
#define V_OUT_BATH_MAX_DIFFx100 300 /* 3.0 x100 */
#define V_OUT_BATL_MAX_DIFFx100 400 /* 4.0 x100 */
-#define MAX_V_RING_MEANx100 50
-#define TARGET_V_RING_RMSx100 2720
-#define V_RMS_RING_MAX_DIFFx100 250
+#define MAX_V_RING_MEANx100 50
+#define TARGET_V_RING_RMSx100 2720
+#define V_RMS_RING_MAX_DIFFx100 250
#define LM_OK_SRC_IRG_2 (1 << 4)
@@ -624,97 +624,106 @@ unsigned short codsp_read_cop_short(int duslic_id, int channel, unsigned char ad
/****************************************************************************/
-#define MAX_POP_BLOCK 50
+#define MAX_POP_BLOCK 50
-void codsp_write_pop_block(int duslic_id, int channel, unsigned char addr, const unsigned char *block, int len)
+void codsp_write_pop_block (int duslic_id, int channel, unsigned char addr,
+ const unsigned char *block, int len)
{
unsigned char cmd[2 + MAX_POP_BLOCK];
- if (len > MAX_POP_BLOCK) /* truncate */
- len = MAX_POP_BLOCK;
+ if (len > MAX_POP_BLOCK) /* truncate */
+ len = MAX_POP_BLOCK;
- cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_POP;
+ cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP;
cmd[1] = addr;
- memcpy(cmd + 2, block, len);
- codsp_send(duslic_id, cmd, 2 + len, 0, 0);
+ memcpy (cmd + 2, block, len);
+ codsp_send (duslic_id, cmd, 2 + len, 0, 0);
}
-void codsp_write_pop_char(int duslic_id, int channel, unsigned char regno, unsigned char val)
+void codsp_write_pop_char (int duslic_id, int channel, unsigned char regno,
+ unsigned char val)
{
unsigned char cmd[3];
- cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_POP;
+ cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP;
cmd[1] = regno;
cmd[2] = val;
- codsp_send(duslic_id, cmd, 3, 0, 0);
+ codsp_send (duslic_id, cmd, 3, 0, 0);
}
-void codsp_write_pop_short(int duslic_id, int channel, unsigned char regno, unsigned short val)
+void codsp_write_pop_short (int duslic_id, int channel, unsigned char regno,
+ unsigned short val)
{
unsigned char cmd[4];
- cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_POP;
+ cmd[0] = CODSP_WR | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP;
cmd[1] = regno;
- cmd[2] = (unsigned char)(val >> 8);
- cmd[3] = (unsigned char)val;
+ cmd[2] = (unsigned char) (val >> 8);
+ cmd[3] = (unsigned char) val;
- codsp_send(duslic_id, cmd, 4, 0, 0);
+ codsp_send (duslic_id, cmd, 4, 0, 0);
}
-void codsp_write_pop_int(int duslic_id, int channel, unsigned char regno, unsigned int val)
+void codsp_write_pop_int (int duslic_id, int channel, unsigned char regno,
+ unsigned int val)
{
unsigned char cmd[5];
- cmd[0] = CODSP_WR | CODSP_ADR(channel) | CODSP_CMD_POP;
+ cmd[0] = CODSP_WR | CODSP_ADR (channel) | CODSP_CMD_POP;
cmd[1] = regno;
- cmd[2] = (unsigned char)(val >> 24);
- cmd[3] = (unsigned char)(val >> 16);
- cmd[4] = (unsigned char)(val >> 8);
- cmd[5] = (unsigned char)val;
+ cmd[2] = (unsigned char) (val >> 24);
+ cmd[3] = (unsigned char) (val >> 16);
+ cmd[4] = (unsigned char) (val >> 8);
+ cmd[5] = (unsigned char) val;
- codsp_send(duslic_id, cmd, 6, 0, 0);
+ codsp_send (duslic_id, cmd, 6, 0, 0);
}
-unsigned char codsp_read_pop_char(int duslic_id, int channel, unsigned char regno)
+unsigned char codsp_read_pop_char (int duslic_id, int channel,
+ unsigned char regno)
{
unsigned char cmd[3];
unsigned char res[2];
- cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_POP;
+ cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP;
cmd[1] = regno;
- codsp_send(duslic_id, cmd, 2, res, 2);
+ codsp_send (duslic_id, cmd, 2, res, 2);
return res[1];
}
-unsigned short codsp_read_pop_short(int duslic_id, int channel, unsigned char regno)
+unsigned short codsp_read_pop_short (int duslic_id, int channel,
+ unsigned char regno)
{
unsigned char cmd[2];
unsigned char res[3];
- cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_POP;
+ cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP;
cmd[1] = regno;
- codsp_send(duslic_id, cmd, 2, res, 3);
+ codsp_send (duslic_id, cmd, 2, res, 3);
- return ((unsigned short)res[1] << 8) | res[2];
+ return ((unsigned short) res[1] << 8) | res[2];
}
-unsigned int codsp_read_pop_int(int duslic_id, int channel, unsigned char regno)
+unsigned int codsp_read_pop_int (int duslic_id, int channel,
+ unsigned char regno)
{
unsigned char cmd[2];
unsigned char res[5];
- cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR(channel) | CODSP_CMD_POP;
+ cmd[0] = CODSP_RD | CODSP_OP | CODSP_ADR (channel) | CODSP_CMD_POP;
cmd[1] = regno;
- codsp_send(duslic_id, cmd, 2, res, 5);
+ codsp_send (duslic_id, cmd, 2, res, 5);
- return ((unsigned int)res[1] << 24) | ((unsigned int)res[2] << 16) | ((unsigned int)res[3] << 8) | res[4];
+ return (((unsigned int) res[1] << 24) |
+ ((unsigned int) res[2] << 16) |
+ ((unsigned int) res[3] << 8) |
+ res[4] );
}
-
/****************************************************************************/
struct _coeffs {
@@ -725,12 +734,12 @@ struct _coeffs {
struct _coeffs ac_coeffs[11] = {
{ 0x60, {0xAD,0xDA,0xB5,0x9B,0xC7,0x2A,0x9D,0x00} }, /* 0x60 IM-Filter part 1 */
{ 0x68, {0x10,0x00,0xA9,0x82,0x0D,0x77,0x0A,0x00} }, /* 0x68 IM-Filter part 2 */
- { 0x18, {0x08,0xC0,0xD2,0xAB,0xA5,0xE2,0xAB,0x07} }, /* 0x18 FRR-Filter */
- { 0x28, {0x44,0x93,0xF5,0x92,0x88,0x00,0x00,0x00} }, /* 0x28 AR-Filter */
- { 0x48, {0x96,0x38,0x29,0x96,0xC9,0x2B,0x8B,0x00} }, /* 0x48 LPR-Filter */
- { 0x20, {0x08,0xB0,0xDA,0x9D,0xA7,0xFA,0x93,0x06} }, /* 0x20 FRX-Filter */
- { 0x30, {0xBA,0xAC,0x00,0x01,0x85,0x50,0xC0,0x1A} }, /* 0x30 AX-Filter */
- { 0x50, {0x96,0x38,0x29,0xF5,0xFA,0x2B,0x8B,0x00} }, /* 0x50 LPX-Filter */
+ { 0x18, {0x08,0xC0,0xD2,0xAB,0xA5,0xE2,0xAB,0x07} }, /* 0x18 FRR-Filter */
+ { 0x28, {0x44,0x93,0xF5,0x92,0x88,0x00,0x00,0x00} }, /* 0x28 AR-Filter */
+ { 0x48, {0x96,0x38,0x29,0x96,0xC9,0x2B,0x8B,0x00} }, /* 0x48 LPR-Filter */
+ { 0x20, {0x08,0xB0,0xDA,0x9D,0xA7,0xFA,0x93,0x06} }, /* 0x20 FRX-Filter */
+ { 0x30, {0xBA,0xAC,0x00,0x01,0x85,0x50,0xC0,0x1A} }, /* 0x30 AX-Filter */
+ { 0x50, {0x96,0x38,0x29,0xF5,0xFA,0x2B,0x8B,0x00} }, /* 0x50 LPX-Filter */
{ 0x00, {0x00,0x08,0x08,0x81,0x00,0x80,0x00,0x08} }, /* 0x00 TH-Filter part 1 */
{ 0x08, {0x81,0x00,0x80,0x00,0xD7,0x33,0xBA,0x01} }, /* 0x08 TH-Filter part 2 */
{ 0x10, {0xB3,0x6C,0xDC,0xA3,0xA4,0xE5,0x88,0x00} } /* 0x10 TH-Filter part 3 */
@@ -752,14 +761,14 @@ struct _coeffs ac_coeffs_0dB[11] = {
struct _coeffs dc_coeffs[9] = {
{ 0x80, {0x25,0x59,0x9C,0x23,0x24,0x23,0x32,0x1C} }, /* 0x80 DC-Parameter */
- { 0x70, {0x90,0x30,0x1B,0xC0,0x33,0x43,0xAC,0x02} }, /* 0x70 Ringing */
- { 0x90, {0x3F,0xC3,0x2E,0x3A,0x80,0x90,0x00,0x09} }, /* 0x90 LP-Filters */
+ { 0x70, {0x90,0x30,0x1B,0xC0,0x33,0x43,0xAC,0x02} }, /* 0x70 Ringing */
+ { 0x90, {0x3F,0xC3,0x2E,0x3A,0x80,0x90,0x00,0x09} }, /* 0x90 LP-Filters */
{ 0x88, {0xAF,0x80,0x27,0x7B,0x01,0x4C,0x7B,0x02} }, /* 0x88 Hook Levels */
{ 0x78, {0x00,0xC0,0x6D,0x7A,0xB3,0x78,0x89,0x00} }, /* 0x78 Ramp Generator */
- { 0x58, {0xA5,0x44,0x34,0xDB,0x0E,0xA2,0x2A,0x00} }, /* 0x58 TTX */
- { 0x38, {0x33,0x49,0x9A,0x65,0xBB,0x00,0x00,0x00} }, /* 0x38 TG1 */
- { 0x40, {0x33,0x49,0x9A,0x65,0xBB,0x00,0x00,0x00} }, /* 0x40 TG2 */
- { 0x98, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00} } /* 0x98 Reserved */
+ { 0x58, {0xA5,0x44,0x34,0xDB,0x0E,0xA2,0x2A,0x00} }, /* 0x58 TTX */
+ { 0x38, {0x33,0x49,0x9A,0x65,0xBB,0x00,0x00,0x00} }, /* 0x38 TG1 */
+ { 0x40, {0x33,0x49,0x9A,0x65,0xBB,0x00,0x00,0x00} }, /* 0x40 TG2 */
+ { 0x98, {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00} } /* 0x98 Reserved */
};
void program_coeffs(int duslic_id, int channel, struct _coeffs *coeffs, int tab_size)
@@ -767,7 +776,7 @@ void program_coeffs(int duslic_id, int channel, struct _coeffs *coeffs, int tab_
int i;
for (i = 0; i < tab_size; i++)
- codsp_write_cop_block(duslic_id, channel, coeffs[i].addr, coeffs[i].values);
+ codsp_write_cop_block(duslic_id, channel, coeffs[i].addr, coeffs[i].values);
}
#define SS_OPEN_CIRCUIT 0
@@ -800,7 +809,7 @@ static void codsp_set_slic(int duslic_id, int channel, int state)
break;
case SS_ACTIVE_RING:
- case SS_ONHOOKTRNSM:
+ case SS_ONHOOKTRNSM:
codsp_write_sop_char(duslic_id, channel, BCR1_ADDR, (v & ~BCR1_ACTL) | BCR1_ACTR);
codsp_set_ciop_m(duslic_id, channel, CODSP_M_ANY_ACT);
break;
@@ -864,7 +873,7 @@ int wait_level_metering_finish(int duslic_id, int channel)
}
int measure_on_hook_voltages(int slic_id, long *vdd,
- long *v_oh_H, long *v_oh_L, long *ring_mean_v, long *ring_rms_v)
+ long *v_oh_H, long *v_oh_L, long *ring_mean_v, long *ring_rms_v)
{
short LM_Result, Offset_Compensation; /* Signed 16 bit */
long int VDD, VDD_diff, V_in, V_out, Divider_Ratio, Vout_diff ;
@@ -1029,7 +1038,7 @@ int measure_on_hook_voltages(int slic_id, long *vdd,
udelay(10000); /* wait at least 500us to be sure that the Integration Result are valid !!! */
/* Now Read the LM Result Registers (They will hold their value until LM_EN become zero again */
- /* ==>After that Result Regs will be updated every 500us !!!) */
+ /* ==>After that Result Regs will be updated every 500us !!!) */
LM_Result = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
V_in = (-1) * ( ( (((long int)LM_Result) * V_AD_x10000) / N_SAMPLES) >> (15 - K_INTDC_RECT_OFF)) ; /* Vin x 10000*/
@@ -1080,7 +1089,7 @@ int measure_on_hook_voltages(int slic_id, long *vdd,
udelay(10000);
/* Now Read the LM Result Registers (They will hold their value until LM_EN become zero again */
- /* ==>After that Result Regs will be updated every 500us !!!) */
+ /* ==>After that Result Regs will be updated every 500us !!!) */
Offset_Compensation = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
Offset_Compensation = (-1) * ((Offset_Compensation * (1 << K_INTDC_RECT_ON)) / N_SAMPLES);
@@ -1107,7 +1116,7 @@ int measure_on_hook_voltages(int slic_id, long *vdd,
udelay(10000);
/* Now Read the LM Result Registers (They will hold their value until LM_EN become zero again */
- /* ==>After that Result Regs will be updated every 500us !!!) */
+ /* ==>After that Result Regs will be updated every 500us !!!) */
LM_Result = codsp_read_sop_short(duslic_id, channel, LMRES1_ADDR);
V_in = (-1) * ( ( (((long int)LM_Result) * V_AD_x10000) / N_SAMPLES) >> (15 - K_INTDC_RECT_ON) ) ; /* Vin x 10000*/
@@ -1149,22 +1158,22 @@ int test_dtmf(int slic_id)
int channel = slic_id & 1;
for (code = 0; code < 16; code++) {
- b = codsp_read_sop_char(duslic_id, channel, DSCR_ADDR);
- codsp_write_sop_char(duslic_id, channel, DSCR_ADDR,
- (b & ~(DSCR_PTG | DSCR_DG_KEY(15))) | DSCR_DG_KEY(code) | DSCR_TG1_EN | DSCR_TG2_EN);
- udelay(80000);
+ b = codsp_read_sop_char(duslic_id, channel, DSCR_ADDR);
+ codsp_write_sop_char(duslic_id, channel, DSCR_ADDR,
+ (b & ~(DSCR_PTG | DSCR_DG_KEY(15))) | DSCR_DG_KEY(code) | DSCR_TG1_EN | DSCR_TG2_EN);
+ udelay(80000);
intreg = codsp_read_sop_int(duslic_id, channel, INTREG1_ADDR);
- if ((intreg & CODSP_INTREG_INT_CH) == 0)
+ if ((intreg & CODSP_INTREG_INT_CH) == 0)
break;
if ((intreg & CODSP_INTREG_DTMF_OK) == 0 ||
codsp_dtmf_map[(intreg >> 10) & 15] != codsp_dtmf_map[code])
break;
- b = codsp_read_sop_char(duslic_id, channel, DSCR_ADDR);
- codsp_write_sop_char(duslic_id, channel, DSCR_ADDR,
- b & ~(DSCR_COR8 | DSCR_TG1_EN | DSCR_TG2_EN));
+ b = codsp_read_sop_char(duslic_id, channel, DSCR_ADDR);
+ codsp_write_sop_char(duslic_id, channel, DSCR_ADDR,
+ b & ~(DSCR_COR8 | DSCR_TG1_EN | DSCR_TG2_EN));
udelay(80000);
@@ -1172,9 +1181,9 @@ int test_dtmf(int slic_id)
}
if (code != 16) {
- b = codsp_read_sop_char(duslic_id, channel, DSCR_ADDR); /* stop dtmf */
- codsp_write_sop_char(duslic_id, channel, DSCR_ADDR,
- b & ~(DSCR_COR8 | DSCR_TG1_EN | DSCR_TG2_EN));
+ b = codsp_read_sop_char(duslic_id, channel, DSCR_ADDR); /* stop dtmf */
+ codsp_write_sop_char(duslic_id, channel, DSCR_ADDR,
+ b & ~(DSCR_COR8 | DSCR_TG1_EN | DSCR_TG2_EN));
return(1);
}
@@ -1276,7 +1285,7 @@ static int codsp_chip_full_reset(int duslic_id)
}
if (cnt == 5) {
- printf("PCM_Resync(%u) not completed\n", duslic_id);
+ printf("PCM_Resync(%u) not completed\n", duslic_id);
return -2;
}
@@ -1305,11 +1314,11 @@ int slic_self_test(int duslic_mask)
for (slic = 0; slic < MAX_SLICS; slic++) { /* voltages self test */
if (duslic_mask & (1 << (slic >> 1))) {
r = measure_on_hook_voltages(slic, &vdd,
- &v_oh_H, &v_oh_L, &ring_mean_v, &ring_rms_v);
+ &v_oh_H, &v_oh_L, &ring_mean_v, &ring_rms_v);
printf("SLIC %u measured voltages (x100):\n\t"
- "VDD = %ld\tV_OH_H = %ld\tV_OH_L = %ld\tV_RING_MEAN = %ld\tV_RING_RMS = %ld\n",
- slic, vdd, v_oh_H, v_oh_L, ring_mean_v, ring_rms_v);
+ "VDD = %ld\tV_OH_H = %ld\tV_OH_L = %ld\tV_RING_MEAN = %ld\tV_RING_RMS = %ld\n",
+ slic, vdd, v_oh_H, v_oh_L, ring_mean_v, ring_rms_v);
if (r != 0)
error |= 1 << slic;
diff --git a/board/omap5912osk/Makefile b/board/omap5912osk/Makefile
new file mode 100644
index 0000000..ef60dd2
--- /dev/null
+++ b/board/omap5912osk/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := omap5912osk.o flash.o
+SOBJS := platform.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $^
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/omap5912osk/config.mk b/board/omap5912osk/config.mk
new file mode 100644
index 0000000..0375796
--- /dev/null
+++ b/board/omap5912osk/config.mk
@@ -0,0 +1,30 @@
+#
+# (C) Copyright 2002-2004
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+#
+# (C) Copyright 2003
+# Texas Instruments, <www.ti.com>
+# Kshitij Gupta <Kshitij@ti.com>
+#
+# (C) Copyright 2004
+# Texas Instruments, <www.ti.com>
+# Rishi Bhattacharya <rishi@ti.com>
+#
+# TI OSK board with OMAP5912 (ARM925EJS) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# OSK has 1 bank of 256 MB SDRAM
+# Physical Address:
+# 1000'0000 to 2000'0000
+#
+#
+# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000
+# (mem base + reserved)
+#
+# we load ourself to 1108'0000
+#
+#
+
+
+TEXT_BASE = 0x11080000
diff --git a/board/omap5912osk/flash.c b/board/omap5912osk/flash.c
new file mode 100644
index 0000000..36d8817
--- /dev/null
+++ b/board/omap5912osk/flash.c
@@ -0,0 +1,507 @@
+/*
+ * (C) Copyright 2001
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2001-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+
+ * (C) Copyright 2004
+ * Texas Instruments <www.ti.com>
+ * Rishi Bhattacharya
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/byteorder/swab.h>
+
+#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/* Board support for 1 or 2 flash devices */
+#undef FLASH_PORT_WIDTH32
+#define FLASH_PORT_WIDTH16
+
+#ifdef FLASH_PORT_WIDTH16
+#define FLASH_PORT_WIDTH ushort
+#define FLASH_PORT_WIDTHV vu_short
+#define SWAP(x) __swab16(x)
+#else
+#define FLASH_PORT_WIDTH ulong
+#define FLASH_PORT_WIDTHV vu_long
+#define SWAP(x) __swab32(x)
+#endif
+
+#define FPW FLASH_PORT_WIDTH
+#define FPWV FLASH_PORT_WIDTHV
+
+#define mb() __asm__ __volatile__ ("" : : : "memory")
+
+
+/* Flash Organization Structure */
+typedef struct OrgDef {
+ unsigned int sector_number;
+ unsigned int sector_size;
+} OrgDef;
+
+
+/* Flash Organizations */
+OrgDef OrgIntel_28F256L18T[] = {
+ {4, 32 * 1024}, /* 4 * 32kBytes sectors */
+ {255, 128 * 1024}, /* 255 * 128kBytes sectors */
+};
+
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+unsigned long flash_init (void);
+static ulong flash_get_size (FPW * addr, flash_info_t * info);
+static int write_data (flash_info_t * info, ulong dest, FPW data);
+static void flash_get_offsets (ulong base, flash_info_t * info);
+void inline spin_wheel (void);
+void flash_print_info (flash_info_t * info);
+void flash_unprotect_sectors (FPWV * addr);
+int flash_erase (flash_info_t * info, int s_first, int s_last);
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ int i;
+ ulong size = 0;
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ switch (i) {
+ case 0:
+ flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
+ flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
+ break;
+ default:
+ panic ("configured too many flash banks!\n");
+ break;
+ }
+ size += flash_info[i].size;
+ }
+
+ /* Protect monitor and environment sectors
+ */
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_FLASH_BASE,
+ CFG_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
+
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+ return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t * info)
+{
+ int i;
+ OrgDef *pOrgDef;
+
+ pOrgDef = OrgIntel_28F256L18T;
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
+ for (i = 0; i < info->sector_count; i++) {
+ if (i > 255) {
+ info->start[i] = base + (i * 0x8000);
+ info->protect[i] = 0;
+ } else {
+ info->start[i] = base +
+ (i * PHYS_FLASH_SECT_SIZE);
+ info->protect[i] = 0;
+ }
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_INTEL:
+ printf ("INTEL ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_28F256L18T:
+ printf ("FLASH 28F256L18T\n");
+ break;
+ case FLASH_28F128J3A:
+ printf ("FLASH 28F128J3A\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i], info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+ return;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (FPW * addr, flash_info_t * info)
+{
+ volatile FPW value;
+
+ /* Write auto select command: read Manufacturer ID */
+ addr[0x5555] = (FPW) 0x00AA00AA;
+ addr[0x2AAA] = (FPW) 0x00550055;
+ addr[0x5555] = (FPW) 0x00900090;
+
+ mb ();
+ value = addr[0];
+
+ switch (value) {
+
+ case (FPW) INTEL_MANUFACT:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+ case (FPW) MT2_MANUFACT:
+ info->flash_id = FLASH_MAN_INTEL;
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
+ return (0); /* no or unknown flash */
+ }
+
+ mb ();
+ value = addr[1]; /* device ID */
+ switch (value) {
+
+ case (FPW) (INTEL_ID_28F256L18T):
+ info->flash_id += FLASH_28F256L18T;
+ info->sector_count = 259;
+ info->size = 0x02000000;
+ break; /* => 32 MB */
+
+ case (FPW) (INTEL_ID_28F256K3):
+ info->flash_id +=FLASH_28F256K3;
+ info->sector_count = 259;
+ info->size = 0x02000000;
+ printf ("\Intel StrataFlash 28F256K3C device initialized\n");
+ break; /* => 32 MB */
+
+ case (FPW) (INTEL_ID_28F128J3A):
+ info->flash_id +=FLASH_28F128J3A;
+ info->sector_count = 259;
+ info->size = 0x02000000;
+ printf ("\Micron StrataFlash MT28F128J3 device initialized\n");
+ break; /* => 32 MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ break;
+ }
+
+ if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ printf ("** ERROR: sector count %d > max (%d) **\n",
+ info->sector_count, CFG_MAX_FLASH_SECT);
+ info->sector_count = CFG_MAX_FLASH_SECT;
+ }
+
+ addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
+
+ return (info->size);
+}
+
+
+/* unprotects a sector for write and erase
+ * on some intel parts, this unprotects the entire chip, but it
+ * wont hurt to call this additional times per sector...
+ */
+void flash_unprotect_sectors (FPWV * addr)
+{
+#define PD_FINTEL_WSMS_READY_MASK 0x0080
+
+FPW status;
+
+ *addr = (FPW) 0x00500050; /* clear status register */
+
+ /* this sends the clear lock bit command */
+ *addr = (FPW) 0x00600060;
+ *addr = (FPW) 0x00D000D0;
+
+ while (((status =*addr) & (FPW) 0x00800080) != (FPW) 0x00800080);
+
+ *addr = (FPW) 0x00FF00FF;
+
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+ int flag, prot, sect;
+ ulong type, start, last;
+ int rcode = 0;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ type = (info->flash_id & FLASH_VENDMASK);
+ if ((type != FLASH_MAN_INTEL)) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+
+ start = get_timer (0);
+ last = start;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts ();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ FPWV *addr = (FPWV *) (info->start[sect]);
+ FPW status;
+
+ printf ("Erasing sector %2d ... ", sect);
+
+ flash_unprotect_sectors (addr);
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
+
+ *addr = (FPW) 0x00500050;/* clear status register */
+ *addr = (FPW) 0x00200020;/* erase setup */
+ *addr = (FPW) 0x00D000D0;/* erase confirm */
+
+ while (((status =
+ *addr) & (FPW) 0x00800080) !=
+ (FPW) 0x00800080) {
+ if (get_timer_masked () >
+ CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ /* suspend erase */
+ *addr = (FPW) 0x00B000B0;
+ /* reset to read mode */
+ *addr = (FPW) 0x00FF00FF;
+ rcode = 1;
+ break;
+ }
+ }
+
+ /* clear status register cmd. */
+ *addr = (FPW) 0x00500050;
+ *addr = (FPW) 0x00FF00FF;/* resest to read mode */
+ printf (" done\n");
+ }
+ }
+ return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ulong cp, wp;
+ FPW data;
+ int count, i, l, rc, port_width;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return 4;
+ }
+/* get lower word aligned address */
+#ifdef FLASH_PORT_WIDTH16
+ wp = (addr & ~1);
+ port_width = 2;
+#else
+ wp = (addr & ~3);
+ port_width = 4;
+#endif
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+ for (; i < port_width && cnt > 0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+ return (rc);
+ }
+ wp += port_width;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ count = 0;
+ while (cnt >= port_width) {
+ data = 0;
+ for (i = 0; i < port_width; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+ return (rc);
+ }
+ wp += port_width;
+ cnt -= port_width;
+ if (count++ > 0x800) {
+ spin_wheel ();
+ count = 0;
+ }
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i < port_width; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ return (write_data (info, wp, SWAP (data)));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t * info, ulong dest, FPW data)
+{
+ FPWV *addr = (FPWV *) dest;
+ ulong status;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*addr & data) != data) {
+ printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts ();
+ *addr = (FPW) 0x00400040; /* write setup */
+ *addr = data;
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
+
+ /* wait while polling the status register */
+ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+ if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+ *addr = (FPW) 0x00FF00FF; /* restore read mode */
+ return (1);
+ }
+ }
+ *addr = (FPW) 0x00FF00FF; /* restore read mode */
+ return (0);
+}
+
+void inline spin_wheel (void)
+{
+ static int p = 0;
+ static char w[] = "\\/-";
+
+ printf ("\010%c", w[p]);
+ (++p == 3) ? (p = 0) : 0;
+}
diff --git a/board/omap5912osk/omap5912osk.c b/board/omap5912osk/omap5912osk.c
new file mode 100644
index 0000000..27457a1
--- /dev/null
+++ b/board/omap5912osk/omap5912osk.c
@@ -0,0 +1,294 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Rishi Bhattacharya <rishi@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#if defined(CONFIG_OMAP1610)
+#include <./configs/omap1510.h>
+#endif
+
+void flash__init (void);
+void ether__init (void);
+void set_muxconf_regs (void);
+void peripheral_power_enable (void);
+
+#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
+
+static inline void delay (unsigned long loops)
+{
+ __asm__ volatile ("1:\n"
+ "subs %0, %1, #1\n"
+ "bne 1b":"=r" (loops):"0" (loops));
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /* arch number of OMAP 1510-Board */
+ /* to be changed for OMAP 1610 Board */
+ gd->bd->bi_arch_number = 234;
+
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = 0x10000100;
+
+ /* Configure MUX settings */
+ set_muxconf_regs ();
+ peripheral_power_enable ();
+
+/* this speeds up your boot a quite a bit. However to make it
+ * work, you need make sure your kernel startup flush bug is fixed.
+ * ... rkw ...
+ */
+ icache_enable ();
+
+ flash__init ();
+ ether__init ();
+ return 0;
+}
+
+
+int misc_init_r (void)
+{
+ /* currently empty */
+ return (0);
+}
+
+/******************************
+ Routine:
+ Description:
+******************************/
+void flash__init (void)
+{
+#define EMIFS_GlB_Config_REG 0xfffecc0c
+ unsigned int regval;
+ regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG);
+ /* Turn off write protection for flash devices. */
+ regval = regval | 0x0001;
+ *((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval;
+}
+/*************************************************************
+ Routine:ether__init
+ Description: take the Ethernet controller out of reset and wait
+ for the EEPROM load to complete.
+*************************************************************/
+void ether__init (void)
+{
+#define ETH_CONTROL_REG 0x0480000b
+ int i;
+
+ *((volatile unsigned short *) 0xfffece08) = 0x03FF;
+ *((volatile unsigned short *) 0xfffb3824) = 0x8000;
+ *((volatile unsigned short *) 0xfffb3830) = 0x0000;
+ *((volatile unsigned short *) 0xfffb3834) = 0x0009;
+ *((volatile unsigned short *) 0xfffb3838) = 0x0009;
+ *((volatile unsigned short *) 0xfffb3818) = 0x0002;
+ *((volatile unsigned short *) 0xfffb382C) = 0x0048;
+ *((volatile unsigned short *) 0xfffb3824) = 0x8603;
+ udelay (3);
+ for (i=0;i<2000;i++);
+ *((volatile unsigned short *) 0xfffb381C) = 0x6610;
+ udelay (30);
+ for (i=0;i<10000;i++);
+
+ *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
+ udelay (3);
+
+
+}
+
+/******************************
+ Routine:
+ Description:
+******************************/
+int dram_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ return 0;
+}
+
+/******************************************************
+ Routine: set_muxconf_regs
+ Description: Setting up the configuration Mux registers
+ specific to the hardware
+*******************************************************/
+void set_muxconf_regs (void)
+{
+ volatile unsigned int *MuxConfReg;
+ /* set each registers to its reset value; */
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_0);
+ /* setup for UART1 */
+ *MuxConfReg &= ~(0x02000000); /* bit 25 */
+ /* setup for UART2 */
+ *MuxConfReg &= ~(0x01000000); /* bit 24 */
+ /* Disable Uwire CS Hi-Z */
+ *MuxConfReg |= 0x08000000;
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_3);
+ *MuxConfReg = 0x00000000;
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_4);
+ *MuxConfReg = 0x00000000;
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_5);
+ *MuxConfReg = 0x00000000;
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_6);
+ /*setup mux for UART3 */
+ *MuxConfReg |= 0x00000001; /* bit3, 1, 0 (mux0 5,5,26) */
+ *MuxConfReg &= ~0x0000003e;
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_7);
+ *MuxConfReg = 0x00000000;
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_8);
+ /* Disable Uwire CS Hi-Z */
+ *MuxConfReg |= 0x00001200; /*bit 9 for CS0 12 for CS3 */
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_9);
+ /* Need to turn on bits 21 and 12 in FUNC_MUX_CTRL_9 so the */
+ /* hardware will actually use TX and RTS based on bit 25 in */
+ /* FUNC_MUX_CTRL_0. I told you this thing was screwy! */
+ *MuxConfReg |= 0x00201000;
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_A);
+ *MuxConfReg = 0x00000000;
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_B);
+ *MuxConfReg = 0x00000000;
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_C);
+ /* setup for UART2 */
+ /* Need to turn on bits 27 and 24 in FUNC_MUX_CTRL_C so the */
+ /* hardware will actually use TX and RTS based on bit 24 in */
+ /* FUNC_MUX_CTRL_0. */
+ *MuxConfReg |= 0x09000000;
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_D);
+ *MuxConfReg |= 0x00000020;
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_0);
+ *MuxConfReg = 0x00000000;
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_1);
+ *MuxConfReg = 0x00000000;
+ /* mux setup for SD/MMC driver */
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_2);
+ *MuxConfReg &= 0xFFFE0FFF;
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_3);
+ *MuxConfReg = 0x00000000;
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
+ /* bit 13 for MMC2 XOR_CLK */
+ *MuxConfReg &= ~(0x00002000);
+ /* bit 29 for UART 1 */
+ *MuxConfReg &= ~(0x00002000);
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_0);
+ /* Configure for USB. Turn on VBUS_CTRL and VBUS_MODE. */
+ *MuxConfReg |= 0x000C0000;
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int)USB_TRANSCEIVER_CTRL);
+ *MuxConfReg &= ~(0x00000070);
+ *MuxConfReg &= ~(0x00000008);
+ *MuxConfReg |= 0x00000003;
+ *MuxConfReg |= 0x00000180;
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
+ /* bit 17, software controls VBUS */
+ *MuxConfReg &= ~(0x00020000);
+ /* Enable USB 48 and 12M clocks */
+ *MuxConfReg |= 0x00000200;
+ *MuxConfReg &= ~(0x00000180);
+ /*2.75V for MMCSDIO1 */
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) VOLTAGE_CTRL_0);
+ *MuxConfReg = 0x00001FE7;
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) PU_PD_SEL_0);
+ *MuxConfReg = 0x00000000;
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) PU_PD_SEL_1);
+ *MuxConfReg = 0x00000000;
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) PU_PD_SEL_2);
+ *MuxConfReg = 0x00000000;
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) PU_PD_SEL_3);
+ *MuxConfReg = 0x00000000;
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) PU_PD_SEL_4);
+ *MuxConfReg = 0x00000000;
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_4);
+ *MuxConfReg = 0x00000000;
+ /* Turn on UART2 48 MHZ clock */
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
+ *MuxConfReg |= 0x40000000;
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) USB_OTG_CTRL);
+ /* setup for USB VBus detection OMAP161x */
+ *MuxConfReg |= 0x00040000; /* bit 18 */
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int) PU_PD_SEL_2);
+ /* PullUps for SD/MMC driver */
+ *MuxConfReg |= ~(0xFFFE0FFF);
+ MuxConfReg =
+ (volatile unsigned int *) ((unsigned int)COMP_MODE_CTRL_0);
+ *MuxConfReg = COMP_MODE_ENABLE;
+}
+
+/******************************************************
+ Routine: peripheral_power_enable
+ Description: Enable the power for UART1
+*******************************************************/
+void peripheral_power_enable (void)
+{
+#define UART1_48MHZ_ENABLE ((unsigned short)0x0200)
+#define SW_CLOCK_REQUEST ((volatile unsigned short *)0xFFFE0834)
+
+ *SW_CLOCK_REQUEST |= UART1_48MHZ_ENABLE;
+}
diff --git a/board/omap5912osk/platform.S b/board/omap5912osk/platform.S
new file mode 100644
index 0000000..33c7242
--- /dev/null
+++ b/board/omap5912osk/platform.S
@@ -0,0 +1,442 @@
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004
+ *
+ * Modified for OMAP 5912 OSK board by Rishi Bhattacharya, Apr 2004
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+#if defined(CONFIG_OMAP1610)
+#include <./configs/omap1510.h>
+#endif
+
+
+_TEXT_BASE:
+ .word TEXT_BASE /* sdram load addr from config.mk */
+
+.globl platformsetup
+platformsetup:
+
+
+ /*------------------------------------------------------*
+ *mask all IRQs by setting all bits in the INTMR default*
+ *------------------------------------------------------*/
+ mov r1, #0xffffffff
+ ldr r0, =REG_IHL1_MIR
+ str r1, [r0]
+ ldr r0, =REG_IHL2_MIR
+ str r1, [r0]
+
+ /*------------------------------------------------------*
+ * Set up ARM CLM registers (IDLECT1) *
+ *------------------------------------------------------*/
+ ldr r0, REG_ARM_IDLECT1
+ ldr r1, VAL_ARM_IDLECT1
+ str r1, [r0]
+
+ /*------------------------------------------------------*
+ * Set up ARM CLM registers (IDLECT2) *
+ *------------------------------------------------------*/
+ ldr r0, REG_ARM_IDLECT2
+ ldr r1, VAL_ARM_IDLECT2
+ str r1, [r0]
+
+ /*------------------------------------------------------*
+ * Set up ARM CLM registers (IDLECT3) *
+ *------------------------------------------------------*/
+ ldr r0, REG_ARM_IDLECT3
+ ldr r1, VAL_ARM_IDLECT3
+ str r1, [r0]
+
+
+ mov r1, #0x01 /* PER_EN bit */
+ ldr r0, REG_ARM_RSTCT2
+ strh r1, [r0] /* CLKM; Peripheral reset. */
+
+ /* Set CLKM to Sync-Scalable */
+ /* I supposedly need to enable the dsp clock before switching */
+ mov r1, #0x0000
+ ldr r0, REG_ARM_SYSST
+ strh r1, [r0]
+ mov r0, #0x400
+1:
+ subs r0, r0, #0x1 /* wait for any bubbles to finish */
+ bne 1b
+ ldr r1, VAL_ARM_CKCTL
+ ldr r0, REG_ARM_CKCTL
+ strh r1, [r0]
+
+ /* a few nops to let settle */
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+
+ /* setup DPLL 1 */
+ /* Ramp up the clock to 96Mhz */
+ ldr r1, VAL_DPLL1_CTL
+ ldr r0, REG_DPLL1_CTL
+ strh r1, [r0]
+ ands r1, r1, #0x10 /* Check if PLL is enabled. */
+ beq lock_end /* Do not look for lock if BYPASS selected */
+2:
+ ldrh r1, [r0]
+ ands r1, r1, #0x01 /* Check the LOCK bit.*/
+ beq 2b /* loop until bit goes hi. */
+lock_end:
+
+
+ /*------------------------------------------------------*
+ * Turn off the watchdog during init... *
+ *------------------------------------------------------*/
+ ldr r0, REG_WATCHDOG
+ ldr r1, WATCHDOG_VAL1
+ str r1, [r0]
+ ldr r1, WATCHDOG_VAL2
+ str r1, [r0]
+ ldr r0, REG_WSPRDOG
+ ldr r1, WSPRDOG_VAL1
+ str r1, [r0]
+ ldr r0, REG_WWPSDOG
+
+watch1Wait:
+ ldr r1, [r0]
+ tst r1, #0x10
+ bne watch1Wait
+
+ ldr r0, REG_WSPRDOG
+ ldr r1, WSPRDOG_VAL2
+ str r1, [r0]
+ ldr r0, REG_WWPSDOG
+watch2Wait:
+ ldr r1, [r0]
+ tst r1, #0x10
+ bne watch2Wait
+
+
+ /* Set memory timings corresponding to the new clock speed */
+
+ /* Check execution location to determine current execution location
+ * and branch to appropriate initialization code.
+ */
+ /* Load physical SDRAM base. */
+ mov r0, #0x10000000
+ /* Get current execution location. */
+ mov r1, pc
+ /* Compare. */
+ cmp r1, r0
+ /* Skip over EMIF-fast initialization if running from SDRAM. */
+ bge skip_sdram
+
+ /*
+ * Delay for SDRAM initialization.
+ */
+ mov r3, #0x1800 /* value should be checked */
+3:
+ subs r3, r3, #0x1 /* Decrement count */
+ bne 3b
+
+
+ /*
+ * Set SDRAM control values. Disable refresh before MRS command.
+ */
+
+ /* mobile ddr operation */
+ ldr r0, REG_SDRAM_OPERATION
+ mov r2, #07
+ str r2, [r0]
+
+ /* config register */
+ ldr r0, REG_SDRAM_CONFIG
+ ldr r1, SDRAM_CONFIG_VAL
+ str r1, [r0]
+
+ /* manual command register */
+ ldr r0, REG_SDRAM_MANUAL_CMD
+ /* issue set cke high */
+ mov r1, #CMD_SDRAM_CKE_SET_HIGH
+ str r1, [r0]
+ /* issue nop */
+ mov r1, #CMD_SDRAM_NOP
+ str r1, [r0]
+
+ mov r2, #0x0100
+waitMDDR1:
+ subs r2, r2, #1
+ bne waitMDDR1 /* delay loop */
+
+ /* issue precharge */
+ mov r1, #CMD_SDRAM_PRECHARGE
+ str r1, [r0]
+
+ /* issue autorefresh x 2 */
+ mov r1, #CMD_SDRAM_AUTOREFRESH
+ str r1, [r0]
+ str r1, [r0]
+
+ /* mrs register ddr mobile */
+ ldr r0, REG_SDRAM_MRS
+ mov r1, #0x33
+ str r1, [r0]
+
+ /* emrs1 low-power register */
+ ldr r0, REG_SDRAM_EMRS1
+ /* self refresh on all banks */
+ mov r1, #0
+ str r1, [r0]
+
+ ldr r0, REG_DLL_URD_CONTROL
+ ldr r1, DLL_URD_CONTROL_VAL
+ str r1, [r0]
+
+ ldr r0, REG_DLL_LRD_CONTROL
+ ldr r1, DLL_LRD_CONTROL_VAL
+ str r1, [r0]
+
+ ldr r0, REG_DLL_WRT_CONTROL
+ ldr r1, DLL_WRT_CONTROL_VAL
+ str r1, [r0]
+
+ /* delay loop */
+ mov r2, #0x0100
+waitMDDR2:
+ subs r2, r2, #1
+ bne waitMDDR2
+
+ /*
+ * Delay for SDRAM initialization.
+ */
+ mov r3, #0x1800
+4:
+ subs r3, r3, #1 /* Decrement count. */
+ bne 4b
+ b common_tc
+
+skip_sdram:
+
+ ldr r0, REG_SDRAM_CONFIG
+ ldr r1, SDRAM_CONFIG_VAL
+ str r1, [r0]
+
+common_tc:
+ /* slow interface */
+ ldr r1, VAL_TC_EMIFS_CS0_CONFIG
+ ldr r0, REG_TC_EMIFS_CS0_CONFIG
+ str r1, [r0] /* Chip Select 0 */
+
+ ldr r1, VAL_TC_EMIFS_CS1_CONFIG
+ ldr r0, REG_TC_EMIFS_CS1_CONFIG
+ str r1, [r0] /* Chip Select 1 */
+ ldr r1, VAL_TC_EMIFS_CS3_CONFIG
+ ldr r0, REG_TC_EMIFS_CS3_CONFIG
+ str r1, [r0] /* Chip Select 3 */
+
+#ifdef CONFIG_H2_OMAP1610
+ /* inserting additional 2 clock cycle hold time for LAN */
+ ldr r0, REG_TC_EMIFS_CS1_ADVANCED
+ ldr r1, VAL_TC_EMIFS_CS1_ADVANCED
+ str r1, [r0]
+#endif
+ /* Start MPU Timer 1 */
+ ldr r0, REG_MPU_LOAD_TIMER
+ ldr r1, VAL_MPU_LOAD_TIMER
+ str r1, [r0]
+
+ ldr r0, REG_MPU_CNTL_TIMER
+ ldr r1, VAL_MPU_CNTL_TIMER
+ str r1, [r0]
+
+ /* back to arch calling code */
+ mov pc, lr
+
+ /* the literal pools origin */
+ .ltorg
+
+
+REG_TC_EMIFS_CONFIG: /* 32 bits */
+ .word 0xfffecc0c
+REG_TC_EMIFS_CS0_CONFIG: /* 32 bits */
+ .word 0xfffecc10
+REG_TC_EMIFS_CS1_CONFIG: /* 32 bits */
+ .word 0xfffecc14
+REG_TC_EMIFS_CS2_CONFIG: /* 32 bits */
+ .word 0xfffecc18
+REG_TC_EMIFS_CS3_CONFIG: /* 32 bits */
+ .word 0xfffecc1c
+
+#ifdef CONFIG_H2_OMAP1610
+REG_TC_EMIFS_CS1_ADVANCED: /* 32 bits */
+ .word 0xfffecc54
+#endif
+
+/* MPU clock/reset/power mode control registers */
+REG_ARM_CKCTL: /* 16 bits */
+ .word 0xfffece00
+
+REG_ARM_IDLECT3: /* 16 bits */
+ .word 0xfffece24
+REG_ARM_IDLECT2: /* 16 bits */
+ .word 0xfffece08
+REG_ARM_IDLECT1: /* 16 bits */
+ .word 0xfffece04
+
+REG_ARM_RSTCT2: /* 16 bits */
+ .word 0xfffece14
+REG_ARM_SYSST: /* 16 bits */
+ .word 0xfffece18
+/* DPLL control registers */
+REG_DPLL1_CTL: /* 16 bits */
+ .word 0xfffecf00
+
+/* Watch Dog register */
+/* secure watchdog stop */
+REG_WSPRDOG:
+ .word 0xfffeb048
+/* watchdog write pending */
+REG_WWPSDOG:
+ .word 0xfffeb034
+
+WSPRDOG_VAL1:
+ .word 0x0000aaaa
+WSPRDOG_VAL2:
+ .word 0x00005555
+
+/* SDRAM config is: auto refresh enabled, 16 bit 4 bank,
+ counter @8192 rows, 10 ns, 8 burst */
+REG_SDRAM_CONFIG:
+ .word 0xfffecc20
+
+/* Operation register */
+REG_SDRAM_OPERATION:
+ .word 0xfffecc80
+
+/* Manual command register */
+REG_SDRAM_MANUAL_CMD:
+ .word 0xfffecc84
+
+/* SDRAM MRS (New) config is: CAS latency is 2, burst length 8 */
+REG_SDRAM_MRS:
+ .word 0xfffecc70
+
+/* SDRAM MRS (New) config is: CAS latency is 2, burst length 8 */
+REG_SDRAM_EMRS1:
+ .word 0xfffecc78
+
+/* WRT DLL register */
+REG_DLL_WRT_CONTROL:
+ .word 0xfffecc68
+DLL_WRT_CONTROL_VAL:
+ .word 0x03f00002
+
+/* URD DLL register */
+REG_DLL_URD_CONTROL:
+ .word 0xfffeccc0
+DLL_URD_CONTROL_VAL:
+ .word 0x00800002
+
+/* LRD DLL register */
+REG_DLL_LRD_CONTROL:
+ .word 0xfffecccc
+
+REG_WATCHDOG:
+ .word 0xfffec808
+
+REG_MPU_LOAD_TIMER:
+ .word 0xfffec600
+REG_MPU_CNTL_TIMER:
+ .word 0xfffec500
+
+/* 96 MHz Samsung Mobile DDR */
+SDRAM_CONFIG_VAL:
+ .word 0x001200f4
+
+DLL_LRD_CONTROL_VAL:
+ .word 0x00800002
+
+VAL_ARM_CKCTL:
+ .word 0x3000
+VAL_DPLL1_CTL:
+ .word 0x2830
+
+#ifdef CONFIG_OSK_OMAP5912
+VAL_TC_EMIFS_CS0_CONFIG:
+ .word 0x002130b0
+VAL_TC_EMIFS_CS1_CONFIG:
+ .word 0x00001131
+VAL_TC_EMIFS_CS2_CONFIG:
+ .word 0x000055f0
+VAL_TC_EMIFS_CS3_CONFIG:
+ .word 0x88011131
+#endif
+
+#ifdef CONFIG_H2_OMAP1610
+VAL_TC_EMIFS_CS0_CONFIG:
+ .word 0x00203331
+VAL_TC_EMIFS_CS1_CONFIG:
+ .word 0x8180fff3
+VAL_TC_EMIFS_CS2_CONFIG:
+ .word 0xf800f22a
+VAL_TC_EMIFS_CS3_CONFIG:
+ .word 0x88011131
+VAL_TC_EMIFS_CS1_ADVANCED:
+ .word 0x00000022
+#endif
+
+VAL_TC_EMIFF_SDRAM_CONFIG:
+ .word 0x010290fc
+VAL_TC_EMIFF_MRS:
+ .word 0x00000027
+
+VAL_ARM_IDLECT1:
+ .word 0x00000400
+
+VAL_ARM_IDLECT2:
+ .word 0x00000886
+VAL_ARM_IDLECT3:
+ .word 0x00000015
+
+WATCHDOG_VAL1:
+ .word 0x000000f5
+WATCHDOG_VAL2:
+ .word 0x000000a0
+
+VAL_MPU_LOAD_TIMER:
+ .word 0xffffffff
+VAL_MPU_CNTL_TIMER:
+ .word 0xffffffa1
+
+/* command values */
+.equ CMD_SDRAM_NOP, 0x00000000
+.equ CMD_SDRAM_PRECHARGE, 0x00000001
+.equ CMD_SDRAM_AUTOREFRESH, 0x00000002
+.equ CMD_SDRAM_CKE_SET_HIGH, 0x00000007
diff --git a/board/omap5912osk/u-boot.lds b/board/omap5912osk/u-boot.lds
new file mode 100644
index 0000000..901f080
--- /dev/null
+++ b/board/omap5912osk/u-boot.lds
@@ -0,0 +1,51 @@
+/*
+ * (C) Copyright 2002-2004
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm926ejs/start.o (.text)
+ *(.text)
+ }
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+ . = ALIGN(4);
+ .data : { *(.data) }
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
diff --git a/board/omap730p2/omap730p2.c b/board/omap730p2/omap730p2.c
index 5e2fa3b..585b6ee 100644
--- a/board/omap730p2/omap730p2.c
+++ b/board/omap730p2/omap730p2.c
@@ -20,7 +20,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -41,12 +41,12 @@ void ether__init (void);
void set_muxconf_regs (void);
void peripheral_power_enable (void);
-#define FLASH_ON_CS0 1
-#define FLASH_ON_CS3 0
+#define FLASH_ON_CS0 1
+#define FLASH_ON_CS3 0
static inline void delay (unsigned long loops)
{
- __asm__ volatile ("1:\n"
+ __asm__ volatile ("1:\n"
"subs %0, %1, #1\n"
"bne 1b":"=r" (loops):"0" (loops));
}
@@ -63,7 +63,7 @@ int test_boot_mode(void)
/* Toggle backup LED indication */
void toggle_backup_led(void)
{
- static int backupLEDState = 0; /* Init variable so that the LED will be ON the first time */
+ static int backupLEDState = 0; /* Init variable so that the LED will be ON the first time */
volatile unsigned int *IOConfReg;
@@ -145,18 +145,18 @@ int misc_init_r (void)
******************************/
void flash__init (void)
{
- unsigned int regval;
+ unsigned int regval;
- regval = *((volatile unsigned int *) EMIFS_CONFIG);
- /* Turn off write protection for flash devices. */
- regval = regval | 0x0001;
- *((volatile unsigned int *) EMIFS_CONFIG) = regval;
+ regval = *((volatile unsigned int *) EMIFS_CONFIG);
+ /* Turn off write protection for flash devices. */
+ regval = regval | 0x0001;
+ *((volatile unsigned int *) EMIFS_CONFIG) = regval;
}
/*************************************************************
Routine:ether__init
Description: take the Ethernet controller out of reset and wait
- for the EEPROM load to complete.
+ for the EEPROM load to complete.
*************************************************************/
void ether__init (void)
{
@@ -196,7 +196,7 @@ int dram_init (void)
/******************************************************
Routine: set_muxconf_regs
Description: Setting up the configuration Mux registers
- specific to the hardware
+ specific to the hardware
*******************************************************/
void set_muxconf_regs (void)
{
@@ -209,12 +209,12 @@ void set_muxconf_regs (void)
/* Configure MUXed pin. Mode 6: GPIO_140 */
MuxConfReg = (volatile unsigned int *) (PERSEUS2_IO_CONF10);
- *MuxConfReg &= (0xFFFFFF1F); /* Clear D_MPU_LPG1 */
- *MuxConfReg |= 0x000000C0; /* Set D_MPU_LPG1 to 0x6 */
+ *MuxConfReg &= (0xFFFFFF1F); /* Clear D_MPU_LPG1 */
+ *MuxConfReg |= 0x000000C0; /* Set D_MPU_LPG1 to 0x6 */
/* Configure GPIO_140 as output */
MuxConfReg = (volatile unsigned int *) ((unsigned int) OMAP730_GPIO_BASE_5 + GPIO_DIRECTION_CONTROL);
- *MuxConfReg &= (0xFFFFEFFF); /* Clear direction (output) for GPIO 140 */
+ *MuxConfReg &= (0xFFFFEFFF); /* Clear direction (output) for GPIO 140 */
/*
* Configure GPIOs for battery charge & feedback
@@ -222,24 +222,24 @@ void set_muxconf_regs (void)
/* Configure MUXed pin. Mode 6: GPIO_35 */
MuxConfReg = (volatile unsigned int *) (PERSEUS2_IO_CONF3);
- *MuxConfReg &= 0xFFFFFFF1; /* Clear M_CLK_OUT */
- *MuxConfReg |= 0x0000000C; /* Set M_CLK_OUT = 0x6 (GPIOs) */
+ *MuxConfReg &= 0xFFFFFFF1; /* Clear M_CLK_OUT */
+ *MuxConfReg |= 0x0000000C; /* Set M_CLK_OUT = 0x6 (GPIOs) */
/* Configure MUXed pin. Mode 6: GPIO_72,73,74 */
MuxConfReg = (volatile unsigned int *) (PERSEUS2_IO_CONF5);
- *MuxConfReg &= 0xFFFF1FFF; /* Clear D_DDR */
- *MuxConfReg |= 0x0000C000; /* Set D_DDR = 0x6 (GPIOs) */
+ *MuxConfReg &= 0xFFFF1FFF; /* Clear D_DDR */
+ *MuxConfReg |= 0x0000C000; /* Set D_DDR = 0x6 (GPIOs) */
MuxConfReg = (volatile unsigned int *) ((unsigned int) OMAP730_GPIO_BASE_3 + GPIO_DIRECTION_CONTROL);
- *MuxConfReg |= 0x00000100; /* Configure GPIO_72 as input */
- *MuxConfReg &= 0xFFFFFDFF; /* Configure GPIO_73 as output */
+ *MuxConfReg |= 0x00000100; /* Configure GPIO_72 as input */
+ *MuxConfReg &= 0xFFFFFDFF; /* Configure GPIO_73 as output */
/*
* Allow battery charge
*/
MuxConfReg = (volatile unsigned int *) ((unsigned int) OMAP730_GPIO_BASE_3 + GPIO_DATA_OUTPUT);
- *MuxConfReg &= (0xFFFFFDFF); /* Clear GPIO_73 pin */
+ *MuxConfReg &= (0xFFFFFDFF); /* Clear GPIO_73 pin */
/*
* Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
diff --git a/board/omap730p2/platform.S b/board/omap730p2/platform.S
index 1f1c95a..f30c242 100644
--- a/board/omap730p2/platform.S
+++ b/board/omap730p2/platform.S
@@ -391,5 +391,5 @@ PERSEUS2_CONFIG_BASE:
.equ CONF_MOD_UART1_CLK_MODE_R, 0x0A
/* misc values */
-.equ IRQ_MASK, 0x80 // IRQ mask value
-.equ FIQ_MASK, 0x40 // FIQ mask value
+.equ IRQ_MASK, 0x80 /* IRQ mask value */
+.equ FIQ_MASK, 0x40 /* FIQ mask value */
diff --git a/board/rmu/rmu.c b/board/rmu/rmu.c
index e11b5b8..cf00efc 100644
--- a/board/rmu/rmu.c
+++ b/board/rmu/rmu.c
@@ -69,7 +69,7 @@ const uint sdram_table[] =
*/
0x0FF0CC24, 0xFFFFCC24, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, 0xEFFB8C34, 0x0FF74C34,
- 0x0FFACCB4, 0x0FF5CC34, 0x0FFCC34, 0x0FFFCCB4,
+ 0x0FFACCB4, 0x0FF5CC34, 0x0FFFCC34, 0x0FFFCCB4,
/*
* Exception. (Offset 3Ch in UPMA RAM)