diff options
Diffstat (limited to 'board')
66 files changed, 1385 insertions, 234 deletions
diff --git a/board/BuS/eb_cpux9k2/cpux9k2.c b/board/BuS/eb_cpux9k2/cpux9k2.c index a918b04..856d798 100644 --- a/board/BuS/eb_cpux9k2/cpux9k2.c +++ b/board/BuS/eb_cpux9k2/cpux9k2.c @@ -141,7 +141,7 @@ void reset_phy(void) int dram_init(void) { - gd->ram_size = get_ram_size((volatile long *)CONFIG_SYS_SDRAM_BASE, + gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_SIZE); return 0; } diff --git a/board/armadillo/flash.c b/board/armadillo/flash.c index cdbbfd0..cf7d7f6 100644 --- a/board/armadillo/flash.c +++ b/board/armadillo/flash.c @@ -162,6 +162,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) int rc = ERR_OK; unsigned long base; unsigned long addr; + ulong start; if ((info->flash_id & FLASH_VENDMASK) != (FUJ_MANUFACT & FLASH_VENDMASK)) { @@ -192,7 +193,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) /* Start erase on unprotected sectors */ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { /* ARM simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ @@ -232,6 +233,7 @@ static int write_word (flash_info_t * info, ulong dest, ushort data) { int flag; unsigned long base; + ulong start; /* Check if Flash is (sufficiently) erased */ @@ -250,7 +252,7 @@ static int write_word (flash_info_t * info, ulong dest, ushort data) flag = disable_interrupts (); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); base = dest & 0xF0000000; FL_WORD (base + (0x555 << 1)) = 0xAA; diff --git a/board/atmel/at91rm9200dk/flash.c b/board/atmel/at91rm9200dk/flash.c index 902c3c4..be22743 100644 --- a/board/atmel/at91rm9200dk/flash.c +++ b/board/atmel/at91rm9200dk/flash.c @@ -285,6 +285,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) int iflag, cflag, prot, sect; int rc = ERR_OK; int chip1; + ulong start; /* first look for protection bits */ @@ -325,7 +326,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ volatile u16 *addr = (volatile u16 *) (info->start[sect]); @@ -345,7 +346,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) result = *addr; /* check timeout */ - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { MEM_FLASH_ADDR1 = CMD_READ_ARRAY; chip1 = TMO; break; @@ -400,6 +401,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data) int rc = ERR_OK; int cflag, iflag; int chip1; + ulong start; /* * Check if Flash is (sufficiently) erased @@ -425,7 +427,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait until flash is ready */ chip1 = 0; @@ -433,7 +435,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data) result = *addr; /* check timeout */ - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { chip1 = ERR | TMO; break; } diff --git a/board/atmel/at91rm9200ek/at91rm9200ek.c b/board/atmel/at91rm9200ek/at91rm9200ek.c index ec0daba..2b4d845 100644 --- a/board/atmel/at91rm9200ek/at91rm9200ek.c +++ b/board/atmel/at91rm9200ek/at91rm9200ek.c @@ -64,7 +64,7 @@ int board_early_init_f(void) int dram_init (void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile long *)CONFIG_SYS_SDRAM_BASE, + gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_SIZE); return 0; } diff --git a/board/cerf250/flash.c b/board/cerf250/flash.c index a4b201e..e1e7807 100644 --- a/board/cerf250/flash.c +++ b/board/cerf250/flash.c @@ -221,7 +221,7 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info) int flash_erase (flash_info_t *info, int s_first, int s_last) { int flag, prot, sect; - ulong type, start, last; + ulong type, start; int rcode = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -254,9 +254,6 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("\n"); } - start = get_timer (0); - last = start; - /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); @@ -269,14 +266,14 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); *addr = (FPW) 0x00500050; /* clear status register */ *addr = (FPW) 0x00200020; /* erase setup */ *addr = (FPW) 0x00D000D0; /* erase confirm */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = (FPW) 0x00B000B0; /* suspend erase */ *addr = (FPW) 0x00FF00FF; /* reset to read mode */ @@ -393,6 +390,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) FPWV *addr = (FPWV *) dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -406,11 +404,11 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (1); } diff --git a/board/cm4008/flash.c b/board/cm4008/flash.c index 2e66872..d6fd519 100644 --- a/board/cm4008/flash.c +++ b/board/cm4008/flash.c @@ -209,6 +209,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) int flag, prot, sect; ulong type; int rcode = 0; + ulong start; if ((s_first < 0) || (s_first > s_last)) { if (info->flash_id == FLASH_UNKNOWN) { @@ -250,7 +251,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); addr = (volatile unsigned char *) (info->start[sect]); *addr = 0x50; /* clear status register */ @@ -258,7 +259,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) *addr = 0xD0; /* erase confirm */ while (((status = *addr) & 0x80) != 0x80) { - if (get_timer_masked () > + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = 0xB0; /* suspend erase */ @@ -370,6 +371,7 @@ static int write_data (flash_info_t * info, ulong dest, unsigned char data) volatile unsigned char *addr = (volatile unsigned char *) dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -384,11 +386,11 @@ static int write_data (flash_info_t * info, ulong dest, unsigned char data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & 0x80) != 0x80) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = 0xFF; /* restore read mode */ return (1); } diff --git a/board/cm41xx/flash.c b/board/cm41xx/flash.c index 2e66872..d6fd519 100644 --- a/board/cm41xx/flash.c +++ b/board/cm41xx/flash.c @@ -209,6 +209,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) int flag, prot, sect; ulong type; int rcode = 0; + ulong start; if ((s_first < 0) || (s_first > s_last)) { if (info->flash_id == FLASH_UNKNOWN) { @@ -250,7 +251,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); addr = (volatile unsigned char *) (info->start[sect]); *addr = 0x50; /* clear status register */ @@ -258,7 +259,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) *addr = 0xD0; /* erase confirm */ while (((status = *addr) & 0x80) != 0x80) { - if (get_timer_masked () > + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = 0xB0; /* suspend erase */ @@ -370,6 +371,7 @@ static int write_data (flash_info_t * info, ulong dest, unsigned char data) volatile unsigned char *addr = (volatile unsigned char *) dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -384,11 +386,11 @@ static int write_data (flash_info_t * info, ulong dest, unsigned char data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & 0x80) != 0x80) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = 0xFF; /* restore read mode */ return (1); } diff --git a/board/cmc_pu2/flash.c b/board/cmc_pu2/flash.c index d832e62..d10faab 100644 --- a/board/cmc_pu2/flash.c +++ b/board/cmc_pu2/flash.c @@ -264,7 +264,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) { vu_short *addr = (vu_short *)(info->start[0]); int flag, prot, sect, ssect, l_sect; - ulong now, last; + ulong now, last, start; debug ("flash_erase: first: %d last: %d\n", s_first, s_last); @@ -335,11 +335,11 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) if (l_sect < 0) goto DONE; - reset_timer_masked (); + start = get_timer(0); last = 0; addr = (vu_short *)(info->start[l_sect]); while ((addr[0] & 0x0080) != 0x0080) { - if ((now = get_timer_masked ()) > CONFIG_SYS_FLASH_ERASE_TOUT) { + if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); return 1; } @@ -434,6 +434,7 @@ static int write_word_amd (flash_info_t *info, vu_short *dest, ushort data) { int flag; vu_short *base; /* first address in flash bank */ + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*dest & data) != data) { @@ -455,11 +456,11 @@ static int write_word_amd (flash_info_t *info, vu_short *dest, ushort data) if (flag) enable_interrupts(); - reset_timer_masked (); + start = get_timer(0); /* data polling for D7 */ while ((*dest & 0x0080) != (data & 0x0080)) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *dest = 0x00F0; /* reset bank */ return (1); } diff --git a/board/cradle/flash.c b/board/cradle/flash.c index b5635fb..1601782 100644 --- a/board/cradle/flash.c +++ b/board/cradle/flash.c @@ -136,6 +136,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) { int flag, prot, sect; int rc = ERR_OK; + ulong start; if (info->flash_id == FLASH_UNKNOWN) return ERR_UNKNOWN_FLASH_TYPE; @@ -173,7 +174,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ vu_short *addr = (vu_short *) (info->start[sect]); @@ -182,7 +183,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) *addr = 0xD0; /* erase confirm */ while ((*addr & 0x80) != 0x80) { - if (get_timer_masked () > + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = 0xB0; /* suspend erase */ *addr = 0xFF; /* reset to read mode */ @@ -221,6 +222,7 @@ static int write_word (flash_info_t * info, ulong dest, ushort data) vu_short *addr = (vu_short *) dest, val; int rc = ERR_OK; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ @@ -246,11 +248,11 @@ static int write_word (flash_info_t * info, ulong dest, ushort data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((val = *addr) & 0x80) != 0x80) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { rc = ERR_TIMOUT; /* suspend program command */ *addr = 0xB0; diff --git a/board/csb226/flash.c b/board/csb226/flash.c index 02ded1c..e103470 100644 --- a/board/csb226/flash.c +++ b/board/csb226/flash.c @@ -141,6 +141,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last) { int flag, prot, sect; int rc = ERR_OK; + ulong start; if (info->flash_id == FLASH_UNKNOWN) return ERR_UNKNOWN_FLASH_TYPE; @@ -175,7 +176,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last) printf("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ u32 * volatile addr = (u32 * volatile)(info->start[sect]); @@ -189,7 +190,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last) *addr = 0x00D000D0; /* erase confirm */ while ((*addr & 0x00800080) != 0x00800080) { - if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = 0x00B000B0; /* suspend erase*/ *addr = 0x00FF00FF; /* read mode */ rc = ERR_TIMOUT; @@ -221,6 +222,7 @@ static int write_long (flash_info_t *info, ulong dest, ulong data) u32 * volatile addr = (u32 * volatile)dest, val; int rc = ERR_OK; int flag; + ulong start; /* read array command - just for the case... */ *addr = 0x00FF00FF; @@ -247,11 +249,11 @@ static int write_long (flash_info_t *info, ulong dest, ulong data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); /* wait while polling the status register */ while(((val = *addr) & 0x00800080) != 0x00800080) { - if (get_timer_masked() > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { rc = ERR_TIMOUT; /* suspend program command */ *addr = 0x00B000B0; diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c index b1238d5..ec22627 100644 --- a/board/davedenx/qong/qong.c +++ b/board/davedenx/qong/qong.c @@ -44,7 +44,7 @@ void hw_watchdog_reset(void) int dram_init (void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE, + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE); return 0; } diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c index 2bfdf23..6103339 100644 --- a/board/davinci/common/misc.c +++ b/board/davinci/common/misc.c @@ -38,7 +38,7 @@ int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ gd->ram_size = get_ram_size( - (volatile void *)CONFIG_SYS_SDRAM_BASE, + (void *)CONFIG_SYS_SDRAM_BASE, CONFIG_MAX_RAM_BANK_SIZE); return 0; } diff --git a/board/dnp1110/flash.c b/board/dnp1110/flash.c index c81abc5..53f89ee 100644 --- a/board/dnp1110/flash.c +++ b/board/dnp1110/flash.c @@ -212,7 +212,7 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info) int flash_erase (flash_info_t *info, int s_first, int s_last) { int flag, prot, sect; - ulong type, start, last; + ulong type, start; int rcode = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -245,9 +245,6 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("\n"); } - start = get_timer (0); - last = start; - /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); @@ -260,14 +257,14 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); *addr = (FPW)0x00500050; /* clear status register */ *addr = (FPW)0x00200020; /* erase setup */ *addr = (FPW)0x00D000D0; /* erase confirm */ while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) { - if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = (FPW)0x00B000B0; /* suspend erase */ *addr = (FPW)0x00FF00FF; /* reset to read mode */ @@ -385,6 +382,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) FPWV *addr = (FPWV *)dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -398,11 +396,11 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) { - if (get_timer_masked() > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (start = get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW)0x00FF00FF; /* restore read mode */ return (1); } diff --git a/board/efikamx/efikamx.c b/board/efikamx/efikamx.c index 16be532..4b36918 100644 --- a/board/efikamx/efikamx.c +++ b/board/efikamx/efikamx.c @@ -113,7 +113,7 @@ u32 get_board_rev(void) int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE, + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE); return 0; } diff --git a/board/ep7312/flash.c b/board/ep7312/flash.c index 0c2b3ae..2ed9c9a 100644 --- a/board/ep7312/flash.c +++ b/board/ep7312/flash.c @@ -119,6 +119,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) { int flag, prot, sect; int rc = ERR_OK; + ulong start; if (info->flash_id == FLASH_UNKNOWN) return ERR_UNKNOWN_FLASH_TYPE; @@ -156,7 +157,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ vu_short *addr = (vu_short *) (info->start[sect]); @@ -165,7 +166,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) *addr = 0xD0; /* erase confirm */ while ((*addr & 0x80) != 0x80) { - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = 0xB0; /* suspend erase */ *addr = 0xFF; /* reset to read mode */ rc = ERR_TIMOUT; @@ -203,6 +204,7 @@ static int write_word (flash_info_t * info, ulong dest, ushort data) vu_short *addr = (vu_short *) dest, val; int rc = ERR_OK; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ @@ -228,11 +230,11 @@ static int write_word (flash_info_t * info, ulong dest, ushort data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((val = *addr) & 0x80) != 0x80) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { rc = ERR_TIMOUT; /* suspend program command */ *addr = 0xB0; diff --git a/board/eukrea/cpu9260/cpu9260.c b/board/eukrea/cpu9260/cpu9260.c index 0959c5c..402f19f 100644 --- a/board/eukrea/cpu9260/cpu9260.c +++ b/board/eukrea/cpu9260/cpu9260.c @@ -174,7 +174,7 @@ int board_init(void) int dram_init(void) { - gd->ram_size = get_ram_size((volatile long *)CONFIG_SYS_SDRAM_BASE, + gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_SIZE); return 0; } diff --git a/board/eukrea/cpuat91/cpuat91.c b/board/eukrea/cpuat91/cpuat91.c index 5d05414..f654f87 100644 --- a/board/eukrea/cpuat91/cpuat91.c +++ b/board/eukrea/cpuat91/cpuat91.c @@ -63,7 +63,7 @@ int board_early_init_f(void) int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile long *)CONFIG_SYS_SDRAM_BASE, + gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_SIZE); return 0; } diff --git a/board/freescale/mx31ads/mx31ads.c b/board/freescale/mx31ads/mx31ads.c index 9bf9c18..7637c92 100644 --- a/board/freescale/mx31ads/mx31ads.c +++ b/board/freescale/mx31ads/mx31ads.c @@ -31,7 +31,7 @@ DECLARE_GLOBAL_DATA_PTR; int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM_1, + gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); return 0; } diff --git a/board/freescale/mx31pdk/mx31pdk.c b/board/freescale/mx31pdk/mx31pdk.c index 08addd2..f6e190a 100644 --- a/board/freescale/mx31pdk/mx31pdk.c +++ b/board/freescale/mx31pdk/mx31pdk.c @@ -42,7 +42,7 @@ void hw_watchdog_reset(void) int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE, + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE); return 0; } diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index e2d3d74..fd7342f 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -53,7 +53,7 @@ u32 get_board_rev(void) int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE, + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE); return 0; } diff --git a/board/freescale/mx53ard/mx53ard.c b/board/freescale/mx53ard/mx53ard.c index b51d209..134603a 100644 --- a/board/freescale/mx53ard/mx53ard.c +++ b/board/freescale/mx53ard/mx53ard.c @@ -46,8 +46,8 @@ int dram_init(void) { u32 size1, size2; - size1 = get_ram_size((volatile void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); - size2 = get_ram_size((volatile void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); + size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); + size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); gd->ram_size = size1 + size2; diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c index a89aa25..88095dc 100644 --- a/board/freescale/mx53evk/mx53evk.c +++ b/board/freescale/mx53evk/mx53evk.c @@ -46,7 +46,7 @@ u32 get_board_rev(void) int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE, + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE); return 0; } diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index d032428..18b388e 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -47,8 +47,8 @@ int dram_init(void) { u32 size1, size2; - size1 = get_ram_size((volatile void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); - size2 = get_ram_size((volatile void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); + size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); + size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); gd->ram_size = size1 + size2; diff --git a/board/freescale/mx53smd/mx53smd.c b/board/freescale/mx53smd/mx53smd.c index f3c433f..21b5d14 100644 --- a/board/freescale/mx53smd/mx53smd.c +++ b/board/freescale/mx53smd/mx53smd.c @@ -44,8 +44,8 @@ int dram_init(void) { u32 size1, size2; - size1 = get_ram_size((volatile void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); - size2 = get_ram_size((volatile void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); + size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); + size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); gd->ram_size = size1 + size2; diff --git a/board/freescale/p2041rdb/Makefile b/board/freescale/p2041rdb/Makefile new file mode 100644 index 0000000..65f348f --- /dev/null +++ b/board/freescale/p2041rdb/Makefile @@ -0,0 +1,56 @@ +# +# Copyright 2011 Freescale Semiconductor, Inc. +# (C) Copyright 2001-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y += $(BOARD).o +COBJS-y += cpld.o +COBJS-y += ddr.o +COBJS-y += law.o +COBJS-y += tlb.o +COBJS-$(CONFIG_PCI) += pci.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS)) + +clean: + rm -f $(OBJS) $(SOBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/p2041rdb/cpld.c b/board/freescale/p2041rdb/cpld.c new file mode 100644 index 0000000..8e1f46e --- /dev/null +++ b/board/freescale/p2041rdb/cpld.c @@ -0,0 +1,171 @@ +/** + * Copyright 2011 Freescale Semiconductor + * Author: Mingkai Hu <Mingkai.hu@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This file provides support for the board-specific CPLD used on some Freescale + * reference boards. + * + * The following macros need to be defined: + * + * CPLD_BASE - The virtual address of the base of the CPLD register map + * + */ + +#include <common.h> +#include <command.h> +#include <asm/io.h> + +#include "cpld.h" + +static u8 __cpld_read(unsigned int reg) +{ + void *p = (void *)CPLD_BASE; + + return in_8(p + reg); +} +u8 cpld_read(unsigned int reg) __attribute__((weak, alias("__cpld_read"))); + +static void __cpld_write(unsigned int reg, u8 value) +{ + void *p = (void *)CPLD_BASE; + + out_8(p + reg, value); +} +void cpld_write(unsigned int reg, u8 value) + __attribute__((weak, alias("__cpld_write"))); + +/* + * Reset the board. This honors the por_cfg registers. + */ +void __cpld_reset(void) +{ + CPLD_WRITE(system_rst, 1); +} +void cpld_reset(void) __attribute__((weak, alias("__cpld_reset"))); + +/** + * Set the boot bank to the alternate bank + */ +void __cpld_set_altbank(void) +{ + CPLD_WRITE(fbank_sel, 1); +} +void cpld_set_altbank(void) + __attribute__((weak, alias("__cpld_set_altbank"))); + +/** + * Set the boot bank to the default bank + */ +void __cpld_clear_altbank(void) +{ + CPLD_WRITE(fbank_sel, 0); +} +void cpld_clear_altbank(void) + __attribute__((weak, alias("__cpld_clear_altbank"))); + +#ifdef DEBUG +static void cpld_dump_regs(void) +{ + printf("cpld_ver = 0x%02x\n", CPLD_READ(cpld_ver)); + printf("cpld_ver_sub = 0x%02x\n", CPLD_READ(cpld_ver_sub)); + printf("pcba_ver = 0x%02x\n", CPLD_READ(pcba_ver)); + printf("system_rst = 0x%02x\n", CPLD_READ(system_rst)); + printf("wd_cfg = 0x%02x\n", CPLD_READ(wd_cfg)); + printf("sw_ctl_on = 0x%02x\n", CPLD_READ(sw_ctl_on)); + printf("por_cfg = 0x%02x\n", CPLD_READ(por_cfg)); + printf("switch_strobe = 0x%02x\n", CPLD_READ(switch_strobe)); + printf("jtag_sel = 0x%02x\n", CPLD_READ(jtag_sel)); + printf("sdbank1_clk = 0x%02x\n", CPLD_READ(sdbank1_clk)); + printf("sdbank2_clk = 0x%02x\n", CPLD_READ(sdbank2_clk)); + printf("fbank_sel = 0x%02x\n", CPLD_READ(fbank_sel)); + printf("serdes_mux = 0x%02x\n", CPLD_READ(serdes_mux)); + printf("SW[2] = 0x%02x\n", in_8(&CPLD_SW(2))); + putc('\n'); +} +#endif + +int cpld_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int rc = 0; + unsigned int i; + + if (argc <= 1) + return cmd_usage(cmdtp); + + if (strcmp(argv[1], "reset") == 0) { + if (strcmp(argv[2], "altbank") == 0) + cpld_set_altbank(); + else + cpld_clear_altbank(); + + cpld_reset(); + } else if (strcmp(argv[1], "watchdog") == 0) { + static char *period[8] = {"1ms", "10ms", "30ms", "disable", + "100ms", "1s", "10s", "60s"}; + for (i = 0; i < ARRAY_SIZE(period); i++) { + if (strcmp(argv[2], period[i]) == 0) + CPLD_WRITE(wd_cfg, i); + } + } else if (strcmp(argv[1], "lane_mux") == 0) { + u32 lane = simple_strtoul(argv[2], NULL, 16); + u8 val = (u8)simple_strtoul(argv[3], NULL, 16); + u8 reg = CPLD_READ(serdes_mux); + + switch (lane) { + case 0x6: + reg &= ~SERDES_MUX_LANE_6_MASK; + reg |= val << SERDES_MUX_LANE_6_SHIFT; + break; + case 0xa: + reg &= ~SERDES_MUX_LANE_A_MASK; + reg |= val << SERDES_MUX_LANE_A_SHIFT; + break; + case 0xc: + reg &= ~SERDES_MUX_LANE_C_MASK; + reg |= val << SERDES_MUX_LANE_C_SHIFT; + break; + case 0xd: + reg &= ~SERDES_MUX_LANE_D_MASK; + reg |= val << SERDES_MUX_LANE_D_SHIFT; + break; + default: + printf("Invalid value\n"); + break; + } + + CPLD_WRITE(serdes_mux, reg); +#ifdef DEBUG + } else if (strcmp(argv[1], "dump") == 0) { + cpld_dump_regs(); +#endif + } else + rc = cmd_usage(cmdtp); + + return rc; +} + +U_BOOT_CMD( + cpld_cmd, CONFIG_SYS_MAXARGS, 1, cpld_cmd, + "Reset the board or pin mulexing selection using the CPLD sequencer", + "reset - hard reset to default bank\n" + "cpld_cmd reset altbank - reset to alternate bank\n" + "cpld_cmd watchdog <watchdog_period> - set the watchdog period\n" + " period: 1ms 10ms 30ms 100ms 1s 10s 60s disable\n" + "cpld_cmd lane_mux <lane> <mux_value> - set multiplexed lane pin\n" + " lane 6: 0 -> slot1 (Default)\n" + " 1 -> SGMII\n" + " lane a: 0 -> slot2 (Default)\n" + " 1 -> AURORA\n" + " lane c: 0 -> slot2 (Default)\n" + " 1 -> SATA0\n" + " lane d: 0 -> slot2 (Default)\n" + " 1 -> SATA1\n" +#ifdef DEBUG + "cpld_cmd dump - display the CPLD registers\n" +#endif + ); diff --git a/board/freescale/p2041rdb/cpld.h b/board/freescale/p2041rdb/cpld.h new file mode 100644 index 0000000..3b24cb0 --- /dev/null +++ b/board/freescale/p2041rdb/cpld.h @@ -0,0 +1,53 @@ +/** + * Copyright 2011 Freescale Semiconductor + * Author: Mingkai Hu <Mingkai.hu@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This file provides support for the ngPIXIS, a board-specific FPGA used on + * some Freescale reference boards. + */ + +/* + * CPLD register set. Feel free to add board-specific #ifdefs where necessary. + */ +typedef struct cpld_data { + u8 cpld_ver; /* 0x0 - CPLD Major Revision Register */ + u8 cpld_ver_sub; /* 0x1 - CPLD Minor Revision Register */ + u8 pcba_ver; /* 0x2 - PCBA Revision Register */ + u8 system_rst; /* 0x3 - system reset register */ + u8 wd_cfg; /* 0x4 - Watchdog Period Setting Register */ + u8 sw_ctl_on; /* 0x5 - Switch Control Enable Register */ + u8 por_cfg; /* 0x6 - POR Control Register */ + u8 switch_strobe; /* 0x7 - Multiplexed pin Select Register */ + u8 jtag_sel; /* 0x8 - JTAG or AURORA Selection */ + u8 sdbank1_clk; /* 0x9 - SerDes Bank1 Reference clock */ + u8 sdbank2_clk; /* 0xa - SerDes Bank2 Reference clock */ + u8 fbank_sel; /* 0xb - Flash bank selection */ + u8 serdes_mux; /* 0xc - Multiplexed pin Select Register */ + u8 sw[1]; /* 0xd - SW2 Status */ +} __attribute__ ((packed)) cpld_data_t; + +#define SERDES_MUX_LANE_6_MASK 0x2 +#define SERDES_MUX_LANE_6_SHIFT 1 +#define SERDES_MUX_LANE_A_MASK 0x1 +#define SERDES_MUX_LANE_A_SHIFT 0 +#define SERDES_MUX_LANE_C_MASK 0x4 +#define SERDES_MUX_LANE_C_SHIFT 2 +#define SERDES_MUX_LANE_D_MASK 0x8 +#define SERDES_MUX_LANE_D_SHIFT 3 + +/* Pointer to the CPLD register set */ +#define cpld ((cpld_data_t *)CPLD_BASE) + +/* The CPLD SW register that corresponds to board switch X, where x >= 1 */ +#define CPLD_SW(x) (cpld->sw[(x) - 2]) + +u8 cpld_read(unsigned int reg); +void cpld_write(unsigned int reg, u8 value); + +#define CPLD_READ(reg) cpld_read(offsetof(cpld_data_t, reg)) +#define CPLD_WRITE(reg, value) cpld_write(offsetof(cpld_data_t, reg), value) diff --git a/board/freescale/p2041rdb/ddr.c b/board/freescale/p2041rdb/ddr.c new file mode 100644 index 0000000..46de910 --- /dev/null +++ b/board/freescale/p2041rdb/ddr.c @@ -0,0 +1,115 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +#include <common.h> +#include <i2c.h> +#include <hwconfig.h> +#include <asm/mmu.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> +#include <asm/fsl_law.h> + +typedef struct { + u32 datarate_mhz_low; + u32 datarate_mhz_high; + u32 n_ranks; + u32 clk_adjust; + u32 wrlvl_start; + u32 cpo; + u32 write_data_delay; + u32 force_2T; +} board_specific_parameters_t; + +/* + * ranges for parameters: + * wr_data_delay = 0-6 + * clk adjust = 0-8 + * cpo 2-0x1E (30) + */ +const board_specific_parameters_t board_specific_parameters[] = { + /* + * memory controller 0 + * lo| hi| num| clk| wrlvl | cpo |wrdata|2T + * mhz| mhz|ranks|adjst| start | delay| + */ + { 1017, 1116, 2, 4, 6, 0xff, 2, 0}, +}; + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + const board_specific_parameters_t *pbsp = + &board_specific_parameters[0]; + u32 num_params = ARRAY_SIZE(board_specific_parameters); + u32 i; + ulong ddr_freq; + + /* + * Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = get_ddr_freq(0) / 1000000; + for (i = 0; i < num_params; i++) { + if (ddr_freq >= pbsp->datarate_mhz_low && + ddr_freq <= pbsp->datarate_mhz_high && + pdimm[0].n_ranks == pbsp->n_ranks) { + popts->cpo_override = pbsp->cpo; + popts->write_data_delay = pbsp->write_data_delay; + popts->clk_adjust = pbsp->clk_adjust; + popts->wrlvl_start = pbsp->wrlvl_start; + popts->twoT_en = pbsp->force_2T; + break; + } + pbsp++; + } + + if (i == num_params) { + printf("Warning: board specific timing not found " + "for data rate %lu MT/s!\n", ddr_freq); + } + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 0; + /* Write leveling override */ + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + + /* Rtt and Rtt_WR override */ + popts->rtt_override = 0; + + /* Enable ZQ calibration */ + popts->zq_en = 1; + + /* DHC_EN =1, ODT = 60 Ohm */ + popts->ddr_cdr1 = DDR_CDR1_DHC_EN; +} + +phys_size_t initdram(int board_type) +{ + phys_size_t dram_size = 0; + + puts("Initializing...."); + + if (fsl_use_spd()) { + puts("using SPD\n"); + dram_size = fsl_ddr_sdram(); + } else { + puts("no SPD and fixed parameters\n"); + return dram_size; + } + + dram_size = setup_ddr_tlbs(dram_size / 0x100000); + dram_size *= 0x100000; + + puts(" DDR: "); + return dram_size; +} diff --git a/board/freescale/p2041rdb/law.c b/board/freescale/p2041rdb/law.c new file mode 100644 index 0000000..127a478 --- /dev/null +++ b/board/freescale/p2041rdb/law.c @@ -0,0 +1,37 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_2M, LAW_TRGT_IF_BMAN), + SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_2M, LAW_TRGT_IF_QMAN), + SET_LAW(CPLD_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC), +#ifdef CONFIG_SYS_DCSRBAR_PHYS + SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR), +#endif +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c new file mode 100644 index 0000000..52269d3 --- /dev/null +++ b/board/freescale/p2041rdb/p2041rdb.c @@ -0,0 +1,203 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <netdev.h> +#include <linux/compiler.h> +#include <asm/mmu.h> +#include <asm/processor.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_law.h> +#include <asm/fsl_serdes.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> + +extern void pci_of_setup(void *blob, bd_t *bd); + +#include "cpld.h" + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + u8 sw; + struct cpu_type *cpu = gd->cpu; + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + unsigned int i; + + printf("Board: %sRDB, ", cpu->name); + printf("CPLD version: %d.%d ", CPLD_READ(cpld_ver), + CPLD_READ(cpld_ver_sub)); + + sw = CPLD_READ(fbank_sel); + printf("vBank: %d\n", sw & 0x1); + +#ifdef CONFIG_PHYS_64BIT + puts("36-bit Addressing\n"); +#endif + + /* + * Display the RCW, so that no one gets confused as to what RCW + * we're actually using for this boot. + */ + puts("Reset Configuration Word (RCW):"); + for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { + u32 rcw = in_be32(&gur->rcwsr[i]); + + if ((i % 4) == 0) + printf("\n %08x:", i * 4); + printf(" %08x", rcw); + } + puts("\n"); + + /* + * Display the actual SERDES reference clocks as configured by the + * dip switches on the board. Note that the SWx registers could + * technically be set to force the reference clocks to match the + * values that the SERDES expects (or vice versa). For now, however, + * we just display both values and hope the user notices when they + * don't match. + */ + puts("SERDES Reference Clocks: "); + sw = in_8(&CPLD_SW(2)) >> 2; + for (i = 0; i < 2; i++) { + static const char * const freq[] = {"0", "100", "125"}; + unsigned int clock = (sw >> (2 * i)) & 3; + + printf("Bank%u=%sMhz ", i+1, freq[clock]); + } + puts("\n"); + + return 0; +} + +int board_early_init_f(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + + /* board only uses the DDR_MCK0/1, so disable the DDR_MCK2/3 */ + setbits_be32(&gur->ddrclkdr, 0x000f000f); + + return 0; +} + +int board_early_init_r(void) +{ + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash + PROMJET region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_256M, 1); + + set_liodns(); + setup_portals(); + + return 0; +} + +static const char *serdes_clock_to_string(u32 clock) +{ + switch (clock) { + case SRDS_PLLCR0_RFCK_SEL_100: + return "100"; + case SRDS_PLLCR0_RFCK_SEL_125: + return "125"; + case SRDS_PLLCR0_RFCK_SEL_156_25: + return "156.25"; + default: + return "150"; + } +} + +#define NUM_SRDS_BANKS 2 + +int misc_init_r(void) +{ + serdes_corenet_t *regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; + u32 actual[NUM_SRDS_BANKS]; + unsigned int i; + u8 sw; + + sw = in_8(&CPLD_SW(2)) >> 2; + for (i = 0; i < NUM_SRDS_BANKS; i++) { + unsigned int clock = (sw >> (2 * i)) & 3; + switch (clock) { + case 1: + actual[i] = SRDS_PLLCR0_RFCK_SEL_100; + break; + case 2: + actual[i] = SRDS_PLLCR0_RFCK_SEL_125; + break; + default: + printf("Warning: SDREFCLK%u switch setting of '11' is " + "unsupported\n", i + 1); + break; + } + } + + for (i = 0; i < NUM_SRDS_BANKS; i++) { + u32 expected = in_be32(®s->bank[i].pllcr0); + expected &= SRDS_PLLCR0_RFCK_SEL_MASK; + if (expected != actual[i]) { + printf("Warning: SERDES bank %u expects reference clock" + " %sMHz, but actual is %sMHz\n", i + 1, + serdes_clock_to_string(expected), + serdes_clock_to_string(actual[i])); + } + } + + return 0; +} + +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + + fdt_fixup_memory(blob, (u64)base, (u64)size); + +#ifdef CONFIG_PCI + pci_of_setup(blob, bd); +#endif + + fdt_fixup_liodn(blob); +} diff --git a/board/freescale/p2041rdb/pci.c b/board/freescale/p2041rdb/pci.c new file mode 100644 index 0000000..1ab4cdf --- /dev/null +++ b/board/freescale/p2041rdb/pci.c @@ -0,0 +1,39 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <pci.h> +#include <asm/fsl_pci.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <asm/fsl_serdes.h> + +void pci_init_board(void) +{ + fsl_pcie_init_board(0); +} + +void pci_of_setup(void *blob, bd_t *bd) +{ + FT_FSL_PCI_SETUP; +} diff --git a/board/freescale/p2041rdb/tlb.c b/board/freescale/p2041rdb/tlb.c new file mode 100644 index 0000000..43f28ed --- /dev/null +++ b/board/freescale/p2041rdb/tlb.c @@ -0,0 +1,119 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, + CONFIG_SYS_INIT_RAM_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + SET_TLB_ENTRY(0, CPLD_BASE, CPLD_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + /* *I*** - Covers boot page */ +#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) + /* + * *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the + * SRAM is at 0xfff00000, it covered the 0xfffff000. + */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_1M, 1), +#else + SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_4K, 1), +#endif + + /* *I*G* - CCSRBAR */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_16M, 1), + + /* *I*G* - Flash, localbus */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_1G, 1), + + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x40000000, + CONFIG_SYS_PCIE1_MEM_PHYS + 0x40000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256M, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x50000000, + CONFIG_SYS_PCIE1_MEM_PHYS + 0x50000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI I/O */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 6, BOOKE_PAGESZ_256K, 1), + + /* Bman/Qman */ + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 9, BOOKE_PAGESZ_1M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x00100000, + CONFIG_SYS_BMAN_MEM_PHYS + 0x00100000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 10, BOOKE_PAGESZ_1M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 11, BOOKE_PAGESZ_1M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x00100000, + CONFIG_SYS_QMAN_MEM_PHYS + 0x00100000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 12, BOOKE_PAGESZ_1M, 1), +#ifdef CONFIG_SYS_DCSRBAR_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 13, BOOKE_PAGESZ_4M, 1), +#endif +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/gcplus/flash.c b/board/gcplus/flash.c index 8511582..ab567e8 100644 --- a/board/gcplus/flash.c +++ b/board/gcplus/flash.c @@ -225,7 +225,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) { int flag, prot, sect; - ulong type, start, last; + ulong type, start; int rcode = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -258,9 +258,6 @@ flash_erase(flash_info_t * info, int s_first, int s_last) printf("\n"); } - start = get_timer(0); - last = start; - /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); @@ -273,7 +270,7 @@ flash_erase(flash_info_t * info, int s_first, int s_last) printf("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); *addr = (FPW) 0x00500050; /* clear status register */ *addr = (FPW) 0x00200020; /* erase setup */ @@ -282,7 +279,7 @@ flash_erase(flash_info_t * info, int s_first, int s_last) while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf("Timeout\n"); *addr = (FPW) 0x00B000B0; /* suspend erase */ *addr = (FPW) 0x00FF00FF; /* reset to read mode */ @@ -401,6 +398,7 @@ write_data(flash_info_t * info, ulong dest, FPW data) FPWV *addr = (FPWV *) dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -414,11 +412,11 @@ write_data(flash_info_t * info, ulong dest, FPW data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked() > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (1); } diff --git a/board/impa7/flash.c b/board/impa7/flash.c index d0c5880..6eae428 100644 --- a/board/impa7/flash.c +++ b/board/impa7/flash.c @@ -128,6 +128,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) { int flag, prot, sect; int rc = ERR_OK; + ulong start; if (info->flash_id == FLASH_UNKNOWN) return ERR_UNKNOWN_FLASH_TYPE; @@ -165,7 +166,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ vu_long *addr = (vu_long *) (info->start[sect]); @@ -174,7 +175,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) *addr = 0x00D000D0; /* erase confirm */ while ((*addr & 0x00800080) != 0x00800080) { - if (get_timer_masked () > + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = 0x00B000B0; /* suspend erase */ *addr = 0x00FF00FF; /* reset to read mode */ @@ -211,6 +212,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data) ulong barf; int rc = ERR_OK; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ @@ -236,14 +238,14 @@ static int write_word (flash_info_t * info, ulong dest, ulong data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* read status register command */ *addr = 0x00700070; /* wait while polling the status register */ while ((*addr & 0x00800080) != 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { rc = ERR_TIMOUT; /* suspend program command */ *addr = 0x00B000B0; diff --git a/board/imx31_phycore/imx31_phycore.c b/board/imx31_phycore/imx31_phycore.c index ca7d6e2..773900e 100644 --- a/board/imx31_phycore/imx31_phycore.c +++ b/board/imx31_phycore/imx31_phycore.c @@ -33,7 +33,7 @@ DECLARE_GLOBAL_DATA_PTR; int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM_1, + gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); return 0; } diff --git a/board/innokom/flash.c b/board/innokom/flash.c index 8c95341..ed4b987 100644 --- a/board/innokom/flash.c +++ b/board/innokom/flash.c @@ -182,6 +182,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last) { int flag, prot, sect; int rc = ERR_OK; + ulong start; if (info->flash_id == FLASH_UNKNOWN) return ERR_UNKNOWN_FLASH_TYPE; @@ -218,7 +219,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last) PRINTK("\n"); /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ u16 * volatile addr = (u16 * volatile)(info->start[sect]); @@ -235,7 +236,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last) while ((*addr & 0x0080) != 0x0080) { PRINTK("."); - if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = 0x00B0; /* suspend erase*/ *addr = 0x00FF; /* read mode */ rc = ERR_TIMOUT; @@ -279,6 +280,7 @@ static int write_word (flash_info_t *info, ulong dest, ushort data) volatile u16 *addr = (u16 *)dest, val; int rc = ERR_OK; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) return ERR_NOT_ERASED; @@ -302,11 +304,11 @@ static int write_word (flash_info_t *info, ulong dest, ushort data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); /* wait while polling the status register */ while(((val = *addr) & 0x80) != 0x80) { - if (get_timer_masked() > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { rc = ERR_TIMOUT; *addr = 0xB0; /* suspend program command */ goto outahere; diff --git a/board/karo/tx25/tx25.c b/board/karo/tx25/tx25.c index 269858c..25b99e8 100644 --- a/board/karo/tx25/tx25.c +++ b/board/karo/tx25/tx25.c @@ -70,18 +70,18 @@ void tx25_fec_init(void) writel(0x0, &padctl->pad_d11); /* drop PHY power and assert reset (low) */ - val = readl(&gpio4->dr) & ~((1 << 7) | (1 << 9)); - writel(val, &gpio4->dr); - val = readl(&gpio4->dir) | (1 << 7) | (1 << 9); - writel(val, &gpio4->dir); + val = readl(&gpio4->gpio_dr) & ~((1 << 7) | (1 << 9)); + writel(val, &gpio4->gpio_dr); + val = readl(&gpio4->gpio_dir) | (1 << 7) | (1 << 9); + writel(val, &gpio4->gpio_dir); mdelay(5); debug("resetting phy\n"); /* turn on PHY power leaving reset asserted */ - val = readl(&gpio4->dr) | 1 << 9; - writel(val, &gpio4->dr); + val = readl(&gpio4->gpio_dr) | 1 << 9; + writel(val, &gpio4->gpio_dr); mdelay(10); @@ -111,19 +111,19 @@ void tx25_fec_init(void) /* * set each to 1 and make each an output */ - val = readl(&gpio3->dr) | (1 << 10) | (1 << 11) | (1 << 12); - writel(val, &gpio3->dr); - val = readl(&gpio3->dir) | (1 << 10) | (1 << 11) | (1 << 12); - writel(val, &gpio3->dir); + val = readl(&gpio3->gpio_dr) | (1 << 10) | (1 << 11) | (1 << 12); + writel(val, &gpio3->gpio_dr); + val = readl(&gpio3->gpio_dir) | (1 << 10) | (1 << 11) | (1 << 12); + writel(val, &gpio3->gpio_dir); mdelay(22); /* this value came from RedBoot */ /* * deassert PHY reset */ - val = readl(&gpio4->dr) | 1 << 7; - writel(val, &gpio4->dr); - writel(val, &gpio4->dr); + val = readl(&gpio4->gpio_dr) | 1 << 7; + writel(val, &gpio4->gpio_dr); + writel(val, &gpio4->gpio_dr); mdelay(5); @@ -160,7 +160,7 @@ int board_late_init(void) int dram_init (void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM_1, + gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); return 0; } @@ -168,11 +168,11 @@ int dram_init (void) void dram_init_banksize(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = get_ram_size((volatile void *)PHYS_SDRAM_1, + gd->bd->bi_dram[0].size = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); #if CONFIG_NR_DRAM_BANKS > 1 gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = get_ram_size((volatile void *)PHYS_SDRAM_2, + gd->bd->bi_dram[1].size = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); #else diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 5da856f..a8f2b23 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -321,7 +321,7 @@ int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ /* Fix this */ - gd->ram_size = get_ram_size((volatile void *)kw_sdram_bar(0), + gd->ram_size = get_ram_size((void *)kw_sdram_bar(0), kw_sdram_bs(0)); return 0; } diff --git a/board/lart/flash.c b/board/lart/flash.c index 29a331e..408c884 100644 --- a/board/lart/flash.c +++ b/board/lart/flash.c @@ -250,6 +250,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) ulong result; int iflag, cflag, prot, sect; int rc = ERR_OK; + ulong start; /* first look for protection bits */ @@ -291,7 +292,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ @@ -305,7 +306,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) do { /* check timeout */ - if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = PUZZLE_TO_FLASH(CMD_SUSPEND); result = BIT_TIMEOUT; @@ -354,6 +355,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data) ulong result; int rc = ERR_OK; int cflag, iflag; + ulong start; /* Check if Flash is (sufficiently) erased */ @@ -377,13 +379,13 @@ static int write_word (flash_info_t *info, ulong dest, ulong data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); /* wait until flash is ready */ do { /* check timeout */ - if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = PUZZLE_TO_FLASH(CMD_SUSPEND); result = BIT_TIMEOUT; diff --git a/board/logicpd/imx27lite/imx27lite.c b/board/logicpd/imx27lite/imx27lite.c index 6eb5cc2..2b273ac 100644 --- a/board/logicpd/imx27lite/imx27lite.c +++ b/board/logicpd/imx27lite/imx27lite.c @@ -38,7 +38,7 @@ int board_init (void) gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; #ifdef CONFIG_MXC_UART - mx27_uart_init_pins(); + mx27_uart1_init_pins(); #endif #ifdef CONFIG_FEC_MXC mx27_fec_init_pins(); @@ -67,7 +67,7 @@ int board_init (void) int dram_init (void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE, + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE); return 0; } @@ -75,11 +75,11 @@ int dram_init (void) void dram_init_banksize(void) { gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; - gd->bd->bi_dram[0].size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE, + gd->bd->bi_dram[0].size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE); #if CONFIG_NR_DRAM_BANKS > 1 gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = get_ram_size((volatile void *)PHYS_SDRAM_2, + gd->bd->bi_dram[1].size = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); #endif } diff --git a/board/logicpd/imx31_litekit/imx31_litekit.c b/board/logicpd/imx31_litekit/imx31_litekit.c index bf635c3..09cc9c5 100644 --- a/board/logicpd/imx31_litekit/imx31_litekit.c +++ b/board/logicpd/imx31_litekit/imx31_litekit.c @@ -32,7 +32,7 @@ DECLARE_GLOBAL_DATA_PTR; int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM_1, + gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); return 0; } diff --git a/board/lpd7a40x/flash.c b/board/lpd7a40x/flash.c index a3ba75b..f5c0713 100644 --- a/board/lpd7a40x/flash.c +++ b/board/lpd7a40x/flash.c @@ -229,6 +229,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) ulong result, result1; int iflag, prot, sect; int rc = ERR_OK; + ulong start; #ifdef USE_920T_MMU int cflag; @@ -284,7 +285,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) sect, info->start[sect]); /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ vu_long *addr = (vu_long *) (info->start[sect]); @@ -297,7 +298,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) /* wait until flash is ready */ do { /* check timeout */ - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = CMD_STATUS_RESET; result = BIT_TIMEOUT; break; @@ -357,6 +358,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data) ulong result; int rc = ERR_OK; int iflag; + ulong start; #ifdef USE_920T_MMU int cflag; @@ -387,12 +389,12 @@ static int write_word (flash_info_t * info, ulong dest, ulong data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait until flash is ready */ do { /* check timeout */ - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = CMD_SUSPEND; result = BIT_TIMEOUT; break; diff --git a/board/lubbock/flash.c b/board/lubbock/flash.c index a4b201e..1ea2893 100644 --- a/board/lubbock/flash.c +++ b/board/lubbock/flash.c @@ -221,7 +221,7 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info) int flash_erase (flash_info_t *info, int s_first, int s_last) { int flag, prot, sect; - ulong type, start, last; + ulong type, start; int rcode = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -254,9 +254,6 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("\n"); } - start = get_timer (0); - last = start; - /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); @@ -269,14 +266,14 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); *addr = (FPW) 0x00500050; /* clear status register */ *addr = (FPW) 0x00200020; /* erase setup */ *addr = (FPW) 0x00D000D0; /* erase confirm */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = (FPW) 0x00B000B0; /* suspend erase */ *addr = (FPW) 0x00FF00FF; /* reset to read mode */ @@ -393,6 +390,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) FPWV *addr = (FPWV *) dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -406,11 +404,11 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start)) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (1); } diff --git a/board/modnet50/flash.c b/board/modnet50/flash.c index 4c31143..4834e21 100644 --- a/board/modnet50/flash.c +++ b/board/modnet50/flash.c @@ -291,6 +291,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) { int flag, sect, setup_offset = 0; int rc = ERR_OK; + ulong start; if (info->flash_id == FLASH_UNKNOWN) { printf ("- missing\n"); @@ -338,14 +339,14 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) (__u16) SECERASE_CMD; /* wait some time */ - reset_timer_masked (); - while (get_timer_masked () < 1000) { + start = get_timer(0); + while (get_timer(start) < 1000) { } /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); while (flash_check_erase_amd (info->start[sect])) { - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("timeout!\n"); /* OOPS: reach timeout, * try to reset chip @@ -411,6 +412,7 @@ static int write_word (flash_info_t * info, ulong dest, ushort data) { int rc = ERR_OK; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*(__u16 *) (dest) & data) != data) @@ -446,10 +448,10 @@ static int write_word (flash_info_t * info, ulong dest, ushort data) } /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); while (flash_check_write_amd (dest)) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { printf ("timeout! @ %08lX\n", dest); /* OOPS: reach timeout, * try to reset chip */ diff --git a/board/mx1ads/mx1ads.c b/board/mx1ads/mx1ads.c index c11c0fe..86b49fb 100644 --- a/board/mx1ads/mx1ads.c +++ b/board/mx1ads/mx1ads.c @@ -169,7 +169,7 @@ int board_late_init (void) int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM_1, + gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); return 0; } diff --git a/board/mx1ads/syncflash.c b/board/mx1ads/syncflash.c index 47f613c..7331efa 100644 --- a/board/mx1ads/syncflash.c +++ b/board/mx1ads/syncflash.c @@ -276,7 +276,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) { /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + get_timer(0); SF_NvmodeErase(); SF_NvmodeWrite(); diff --git a/board/ns9750dev/flash.c b/board/ns9750dev/flash.c index 5b56b98..185bc2d 100644 --- a/board/ns9750dev/flash.c +++ b/board/ns9750dev/flash.c @@ -261,7 +261,7 @@ void flash_unprotect_sectors (FPWV * addr) int flash_erase (flash_info_t * info, int s_first, int s_last) { int flag, prot, sect; - ulong type, start, last; + ulong type, start; int rcode = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -294,10 +294,6 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("\n"); } - - start = get_timer (0); - last = start; - /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); @@ -312,7 +308,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) flash_unprotect_sectors (addr); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); *addr = (FPW) 0x00500050;/* clear status register */ *addr = (FPW) 0x00200020;/* erase setup */ @@ -321,7 +317,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); /* suspend erase */ @@ -441,6 +437,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) FPWV *addr = (FPWV *) dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -454,11 +451,11 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (1); } diff --git a/board/pleb2/flash.c b/board/pleb2/flash.c index a8897dc..2406c5f 100644 --- a/board/pleb2/flash.c +++ b/board/pleb2/flash.c @@ -472,7 +472,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) FPWV *addr; int flag, prot, sect; int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL; - ulong now, last; + ulong start, now, last; int rcode = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -516,8 +516,6 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("\n"); } - reset_timer_masked (); - /* Start erase on unprotected sectors */ for (sect = s_first; sect <= s_last && rcode == 0; sect++) { @@ -527,7 +525,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); - reset_timer_masked (); + start = get_timer(0); last = 0; addr = (FPWV *) (info->start[sect]); @@ -559,7 +557,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) { if ((now = - get_timer_masked ()) > CONFIG_SYS_FLASH_ERASE_TOUT) { + get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); if (intel) { @@ -661,6 +659,7 @@ static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data) int flag; int res = 0; /* result, assume success */ FPWV *base; /* first address in flash bank */ + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*dest & data) != data) { @@ -683,12 +682,12 @@ static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data) if (flag) enable_interrupts (); - reset_timer_masked (); + start = get_timer(0); /* data polling for D7 */ while (res == 0 && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *dest = (FPW) 0x00F000F0; /* reset bank */ res = 1; } @@ -711,6 +710,7 @@ static int write_word_intel (flash_info_t * info, FPWV * dest, FPW data) { int flag; int res = 0; /* result, assume success */ + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*dest & data) != data) { @@ -730,10 +730,10 @@ static int write_word_intel (flash_info_t * info, FPWV * dest, FPW data) if (flag) enable_interrupts (); - reset_timer_masked (); + start = get_timer(0); while (res == 0 && (*dest & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *dest = (FPW) 0x00B000B0; /* Suspend program */ res = 1; } diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c index e0f44dd..2c50fe8 100644 --- a/board/ronetix/pm9261/pm9261.c +++ b/board/ronetix/pm9261/pm9261.c @@ -282,7 +282,7 @@ int board_eth_init(bd_t *bis) int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM, + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); return 0; } diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c index ec9f865..8071600 100644 --- a/board/ronetix/pm9263/pm9263.c +++ b/board/ronetix/pm9263/pm9263.c @@ -379,7 +379,7 @@ int board_init(void) int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM, + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); return 0; } diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c index 79b7c9d..fa69599 100644 --- a/board/ronetix/pm9g45/pm9g45.c +++ b/board/ronetix/pm9g45/pm9g45.c @@ -160,7 +160,7 @@ int board_init(void) int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM, + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); return 0; } diff --git a/board/samsung/smdk2400/flash.c b/board/samsung/smdk2400/flash.c index fb69c21..47382fe 100644 --- a/board/samsung/smdk2400/flash.c +++ b/board/samsung/smdk2400/flash.c @@ -231,6 +231,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) ulong result, result1; int iflag, prot, sect; int rc = ERR_OK; + ulong start; #ifdef USE_920T_MMU int cflag; @@ -286,7 +287,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) sect, info->start[sect]); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ vu_long *addr = (vu_long *) (info->start[sect]); @@ -299,7 +300,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) /* wait until flash is ready */ do { /* check timeout */ - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = CMD_STATUS_RESET; result = BIT_TIMEOUT; break; @@ -359,6 +360,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data) ulong result; int rc = ERR_OK; int iflag; + ulong start; #ifdef USE_920T_MMU int cflag; @@ -389,12 +391,12 @@ static int write_word (flash_info_t * info, ulong dest, ulong data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait until flash is ready */ do { /* check timeout */ - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = CMD_SUSPEND; result = BIT_TIMEOUT; break; diff --git a/board/sbc2410x/flash.c b/board/sbc2410x/flash.c index abb0935..d209a6f 100644 --- a/board/sbc2410x/flash.c +++ b/board/sbc2410x/flash.c @@ -173,6 +173,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) int iflag, cflag, prot, sect; int rc = ERR_OK; int chip; + ulong start; /* first look for protection bits */ @@ -213,7 +214,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ vu_short *addr = (vu_short *) (info->start[sect]); @@ -233,7 +234,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) result = *addr; /* check timeout */ - if (get_timer_masked () > + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { MEM_FLASH_ADDR1 = CMD_READ_ARRAY; chip = TMO; @@ -295,6 +296,7 @@ static int write_hword (flash_info_t * info, ulong dest, ushort data) int rc = ERR_OK; int cflag, iflag; int chip; + ulong start; /* * Check if Flash is (sufficiently) erased @@ -322,7 +324,7 @@ static int write_hword (flash_info_t * info, ulong dest, ushort data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + get_timer(start); /* wait until flash is ready */ chip = 0; @@ -330,7 +332,7 @@ static int write_hword (flash_info_t * info, ulong dest, ushort data) result = *addr; /* check timeout */ - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { chip = ERR | TMO; break; } diff --git a/board/scb9328/config.mk b/board/scb9328/config.mk deleted file mode 100644 index 7c5e067..0000000 --- a/board/scb9328/config.mk +++ /dev/null @@ -1,10 +0,0 @@ -# -# This config file is used for compilation of scb93328 sources -# -# You might change location of U-Boot in memory by setting right CONFIG_SYS_TEXT_BASE. -# This allows for example having one copy located at the end of ram and stored -# in flash device and later on while developing use other location to test -# the code in RAM device only. -# - -CONFIG_SYS_TEXT_BASE = 0x08f00000 diff --git a/board/scb9328/flash.c b/board/scb9328/flash.c index c6f94ae..00c660a 100644 --- a/board/scb9328/flash.c +++ b/board/scb9328/flash.c @@ -97,11 +97,12 @@ static FLASH_BUS_RET flash_status_reg (void) static int flash_ready (ulong timeout) { int ok = 1; + ulong start; - reset_timer_masked (); + start = get_timer(0); while ((flash_status_reg () & FLASH_CMD (CFI_INTEL_SR_READY)) != FLASH_CMD (CFI_INTEL_SR_READY)) { - if (get_timer_masked () > timeout && timeout != 0) { + if (get_timer(start) > timeout && timeout != 0) { ok = 0; break; } diff --git a/board/scb9328/scb9328.c b/board/scb9328/scb9328.c index 428e8c9..2e31e8c 100644 --- a/board/scb9328/scb9328.c +++ b/board/scb9328/scb9328.c @@ -39,23 +39,17 @@ int board_init (void) int dram_init (void) { -#if ( CONFIG_NR_DRAM_BANKS > 0 ) + /* dram_init must store complete ramsize in gd->ram_size */ + gd->ram_size = get_ram_size((volatile void *)SCB9328_SDRAM_1, + SCB9328_SDRAM_1_SIZE); + + return 0; +} + +void dram_init_banksize(void) +{ gd->bd->bi_dram[0].start = SCB9328_SDRAM_1; gd->bd->bi_dram[0].size = SCB9328_SDRAM_1_SIZE; -#endif -#if ( CONFIG_NR_DRAM_BANKS > 1 ) - gd->bd->bi_dram[1].start = SCB9328_SDRAM_2; - gd->bd->bi_dram[1].size = SCB9328_SDRAM_2_SIZE; -#endif -#if ( CONFIG_NR_DRAM_BANKS > 2 ) - gd->bd->bi_dram[2].start = SCB9328_SDRAM_3; - gd->bd->bi_dram[2].size = SCB9328_SDRAM_3_SIZE; -#endif -#if ( CONFIG_NR_DRAM_BANKS > 3 ) - gd->bd->bi_dram[3].start = SCB9328_SDRAM_4; - gd->bd->bi_dram[3].size = SCB9328_SDRAM_4_SIZE; -#endif - return 0; } /** diff --git a/board/shannon/flash.c b/board/shannon/flash.c index 0455afa..179ec5f 100644 --- a/board/shannon/flash.c +++ b/board/shannon/flash.c @@ -190,6 +190,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) int iflag, cflag, prot, sect; int rc = ERR_OK; int chip1, chip2; + ulong start; /* first look for protection bits */ @@ -231,7 +232,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); if (info->protect[sect] == 0) { /* not protected */ @@ -253,7 +254,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) result = *addr; /* check timeout */ - if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { MEM_FLASH_ADDR1 = CMD_READ_ARRAY; chip1 = TMO; @@ -322,6 +323,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data) int rc = ERR_OK; int cflag, iflag; int chip1, chip2; + ulong start; /* * Check if Flash is (sufficiently) erased @@ -349,7 +351,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + start = get_timer(0); /* wait until flash is ready */ chip1 = chip2 = 0; @@ -358,7 +360,7 @@ static int write_word (flash_info_t *info, ulong dest, ulong data) result = *addr; /* check timeout */ - if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { chip1 = ERR | TMO; break; diff --git a/board/syteco/jadecpu/jadecpu.c b/board/syteco/jadecpu/jadecpu.c index a7b6e70..63a0d33 100644 --- a/board/syteco/jadecpu/jadecpu.c +++ b/board/syteco/jadecpu/jadecpu.c @@ -152,7 +152,7 @@ int misc_init_r(void) int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ - gd->ram_size = get_ram_size((volatile void *)PHYS_SDRAM, + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); return 0; diff --git a/board/syteco/zmx25/Makefile b/board/syteco/zmx25/Makefile new file mode 100644 index 0000000..5a0e5b3 --- /dev/null +++ b/board/syteco/zmx25/Makefile @@ -0,0 +1,51 @@ +# +# (c) 2010 Graf-Syteco, Matthias Weisser +# <weisserm@arcor.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y += zmx25.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/syteco/zmx25/lowlevel_init.S b/board/syteco/zmx25/lowlevel_init.S new file mode 100644 index 0000000..8e63de0 --- /dev/null +++ b/board/syteco/zmx25/lowlevel_init.S @@ -0,0 +1,110 @@ +/* + * (C) Copyright 2011 + * Matthias Weisser <weisserm@arcor.de> + * + * (C) Copyright 2009 DENX Software Engineering + * Author: John Rigby <jrigby@gmail.com> + * + * Based on U-Boot and RedBoot sources for several different i.mx + * platforms. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/macro.h> +#include <asm/arch/macro.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/asm-offsets.h> + +/* + * clocks + */ +.macro init_clocks + + /* disable clock output */ + write32 IMX_CCM_BASE + CCM_MCR, 0x00000000 + write32 IMX_CCM_BASE + CCM_CCTL, 0x50030000 + + /* + * enable all implemented clocks in all three + * clock control registers + */ + write32 IMX_CCM_BASE + CCM_CGCR0, 0x1fffffff + write32 IMX_CCM_BASE + CCM_CGCR1, 0xffffffff + write32 IMX_CCM_BASE + CCM_CGCR2, 0xfffff + + /* Devide NAND clock by 32 */ + write32 IMX_CCM_BASE + CCM_PCDR2, 0x0101011F +.endm + +/* + * sdram controller init + */ +.macro init_lpddr + ldr r0, =IMX_ESDRAMC_BASE + ldr r2, =IMX_SDRAM_BANK0_BASE + + /* + * reset SDRAM controller + * then wait for initialization to complete + */ + ldr r1, =(1 << 1) | (1 << 2) + str r1, [r0, #ESDRAMC_ESDMISC] +1: ldr r3, [r0, #ESDRAMC_ESDMISC] + tst r3, #(1 << 31) + beq 1b + ldr r1, =(1 << 2) + str r1, [r0, #ESDRAMC_ESDMISC] + + ldr r1, =0x002a7420 + str r1, [r0, #ESDRAMC_ESDCFG0] + + /* control | precharge */ + ldr r1, =0x92216008 + str r1, [r0, #ESDRAMC_ESDCTL0] + /* dram command encoded in address */ + str r1, [r2, #0x400] + + /* auto refresh */ + ldr r1, =0xa2216008 + str r1, [r0, #ESDRAMC_ESDCTL0] + /* read dram twice to auto refresh */ + ldr r3, [r2] + ldr r3, [r2] + + /* control | load mode */ + ldr r1, =0xb2216008 + str r1, [r0, #ESDRAMC_ESDCTL0] + + /* mode register of lpddram */ + strb r1, [r2, #0x33] + + /* extended mode register of lpddrram */ + ldr r2, =0x81000000 + strb r1, [r2] + + /* control | normal */ + ldr r1, =0x82216008 + str r1, [r0, #ESDRAMC_ESDCTL0] +.endm + +.globl lowlevel_init +lowlevel_init: + init_aips + init_max + init_clocks + init_lpddr + mov pc, lr diff --git a/board/syteco/zmx25/zmx25.c b/board/syteco/zmx25/zmx25.c new file mode 100644 index 0000000..f055038 --- /dev/null +++ b/board/syteco/zmx25/zmx25.c @@ -0,0 +1,203 @@ +/* + * (c) 2011 Graf-Syteco, Matthias Weisser + * <weisserm@arcor.de> + * + * Based on tx25.c: + * (C) Copyright 2009 DENX Software Engineering + * Author: John Rigby <jrigby@gmail.com> + * + * Based on imx27lite.c: + * Copyright (C) 2008,2009 Eric Jarrige <jorasse@users.sourceforge.net> + * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com> + * And: + * RedBoot tx25_misc.c Copyright (C) 2009 Red Hat + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +#include <common.h> +#include <mxc_gpio.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/imx25-pinmux.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_init() +{ + struct iomuxc_mux_ctl *muxctl; + struct iomuxc_pad_ctl *padctl; + struct iomuxc_pad_input_select *inputselect; + u32 gpio_mux_mode0_sion = MX25_PIN_MUX_MODE(0) | MX25_PIN_MUX_SION; + u32 gpio_mux_mode1 = MX25_PIN_MUX_MODE(1); + u32 gpio_mux_mode5 = MX25_PIN_MUX_MODE(5); + u32 gpio_mux_mode6 = MX25_PIN_MUX_MODE(6); + u32 input_select1 = MX25_PAD_INPUT_SELECT_DAISY(1); + u32 input_select2 = MX25_PAD_INPUT_SELECT_DAISY(2); + + icache_enable(); + + muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; + padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE; + inputselect = (struct iomuxc_pad_input_select *)IMX_IOPADINPUTSEL_BASE; + + /* Setup of core volatage selection pin to run at 1.4V */ + writel(gpio_mux_mode5, &muxctl->pad_ext_armclk); /* VCORE GPIO3[15] */ + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(3, 15), MXC_GPIO_DIRECTION_OUT); + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(3, 15), 1); + + /* Setup of input daisy chains for SD card pins*/ + writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_cmd); + writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_clk); + writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data0); + writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data1); + writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data2); + writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data3); + + /* Setup of digital output for USB power and OC */ + writel(gpio_mux_mode5, &muxctl->pad_csi_d3); /* USB Power GPIO1[28] */ + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 28), MXC_GPIO_DIRECTION_OUT); + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 28), 1); + + writel(gpio_mux_mode5, &muxctl->pad_csi_d2); /* USB OC GPIO1[27] */ + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 18), MXC_GPIO_DIRECTION_IN); + + /* Setup of digital output control pins */ + writel(gpio_mux_mode5, &muxctl->pad_csi_d8); /* Ouput 1 Ctrl GPIO1[7] */ + writel(gpio_mux_mode5, &muxctl->pad_csi_d7); /* Ouput 2 Ctrl GPIO1[6] */ + writel(gpio_mux_mode5, &muxctl->pad_csi_d6); /* Ouput 1 Stat GPIO1[31]*/ + writel(gpio_mux_mode5, &muxctl->pad_csi_d5); /* Ouput 2 Stat GPIO1[30]*/ + + writel(0, &padctl->pad_csi_d6); /* Ouput 1 Stat pull up off */ + writel(0, &padctl->pad_csi_d5); /* Ouput 2 Stat pull up off */ + + /* Switch both output drivers off */ + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 7), 0); + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 7), MXC_GPIO_DIRECTION_OUT); + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 6), 0); + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 6), MXC_GPIO_DIRECTION_OUT); + + /* Setup of key input pin GPIO2[29]*/ + writel(gpio_mux_mode5 | MX25_PIN_MUX_SION, &muxctl->pad_kpp_row0); + writel(0, &padctl->pad_kpp_row0); /* Key pull up off */ + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(2, 29), MXC_GPIO_DIRECTION_IN); + + /* Setup of status LED outputs */ + writel(gpio_mux_mode5, &muxctl->pad_csi_d9); /* GPIO4[21] */ + writel(gpio_mux_mode5, &muxctl->pad_csi_d4); /* GPIO1[29] */ + + /* Switch both LEDs off */ + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(4, 21), 0); + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(4, 21), MXC_GPIO_DIRECTION_OUT); + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 29), 0); + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 29), MXC_GPIO_DIRECTION_OUT); + + /* Setup of CAN1 and CAN2 signals */ + writel(gpio_mux_mode6, &muxctl->pad_gpio_a); /* CAN1 TX */ + writel(gpio_mux_mode6, &muxctl->pad_gpio_b); /* CAN1 RX */ + writel(gpio_mux_mode6, &muxctl->pad_gpio_c); /* CAN2 TX */ + writel(gpio_mux_mode6, &muxctl->pad_gpio_d); /* CAN2 RX */ + + /* Setup of input daisy chains for CAN signals*/ + writel(input_select1, &inputselect->can1_ipp_ind_canrx); /* CAN1 RX */ + writel(input_select1, &inputselect->can2_ipp_ind_canrx); /* CAN2 RX */ + + /* Setup of I2C3 signals */ + writel(gpio_mux_mode1, &muxctl->pad_cspi1_ss1); /* I2C3 SDA */ + writel(gpio_mux_mode1, &muxctl->pad_gpio_e); /* I2C3 SCL */ + + /* Setup of input daisy chains for I2C3 signals*/ + writel(input_select1, &inputselect->i2c3_ipp_sda_in); /* I2C3 SDA */ + writel(input_select2, &inputselect->i2c3_ipp_scl_in); /* I2C3 SCL */ + + /* board id for linux */ + gd->bd->bi_arch_number = MACH_TYPE_ZMX25; + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + return 0; +} + +int board_late_init(void) +{ + const char *e; + +#ifdef CONFIG_FEC_MXC + struct iomuxc_mux_ctl *muxctl; + struct iomuxc_pad_ctl *padctl; + u32 gpio_mux_mode2 = MX25_PIN_MUX_MODE(2); + u32 gpio_mux_mode5 = MX25_PIN_MUX_MODE(5); + + /* + * fec pin init is generic + */ + mx25_fec_init_pins(); + + /* + * Set up LAN-RESET and FEC_RX_ERR + * + * LAN-RESET: GPIO3[16] is ALT 5 mode of pin U20 + * FEC_RX_ERR: FEC_RX_ERR is ALT 2 mode of pin R2 + */ + muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; + padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE; + + writel(gpio_mux_mode5, &muxctl->pad_upll_bypclk); + writel(gpio_mux_mode2, &muxctl->pad_uart2_cts); + + /* assert PHY reset (low) */ + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(3, 16), 0); + mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(3, 16), MXC_GPIO_DIRECTION_OUT); + + udelay(5000); + + /* deassert PHY reset */ + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(3, 16), 1); + + udelay(5000); +#endif + + e = getenv("gs_base_board"); + if (e != NULL) { + if (strcmp(e, "G283") == 0) { + int key = mxc_gpio_get(MXC_GPIO_PORT_TO_NUM(2, 29)); + + if (key) { + /* Switch on both LEDs to inidcate boot mode */ + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 29), 0); + mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(4, 21), 0); + + setenv("preboot", "run gs_slow_boot"); + } else + setenv("preboot", "run gs_fast_boot"); + } + } + + return 0; +} + +int dram_init(void) +{ + /* dram_init must store complete ramsize in gd->ram_size */ + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, + PHYS_SDRAM_SIZE); + return 0; +} + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM; + gd->bd->bi_dram[0].size = gd->ram_size; +} diff --git a/board/ti/omap1610inn/flash.c b/board/ti/omap1610inn/flash.c index 36200ad..1b67d08 100644 --- a/board/ti/omap1610inn/flash.c +++ b/board/ti/omap1610inn/flash.c @@ -278,7 +278,7 @@ void flash_unprotect_sectors (FPWV * addr) int flash_erase (flash_info_t * info, int s_first, int s_last) { int flag, prot, sect; - ulong type, start, last; + ulong type, start; int rcode = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -311,10 +311,6 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("\n"); } - - start = get_timer (0); - last = start; - /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); @@ -329,7 +325,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) flash_unprotect_sectors (addr); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); *addr = (FPW) 0x00500050;/* clear status register */ *addr = (FPW) 0x00200020;/* erase setup */ @@ -338,7 +334,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); /* suspend erase */ @@ -458,6 +454,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) FPWV *addr = (FPWV *) dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -470,11 +467,11 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (1); } diff --git a/board/ti/omap730p2/flash.c b/board/ti/omap730p2/flash.c index 5b56b98..185bc2d 100644 --- a/board/ti/omap730p2/flash.c +++ b/board/ti/omap730p2/flash.c @@ -261,7 +261,7 @@ void flash_unprotect_sectors (FPWV * addr) int flash_erase (flash_info_t * info, int s_first, int s_last) { int flag, prot, sect; - ulong type, start, last; + ulong type, start; int rcode = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -294,10 +294,6 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) printf ("\n"); } - - start = get_timer (0); - last = start; - /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); @@ -312,7 +308,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) flash_unprotect_sectors (addr); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); *addr = (FPW) 0x00500050;/* clear status register */ *addr = (FPW) 0x00200020;/* erase setup */ @@ -321,7 +317,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); /* suspend erase */ @@ -441,6 +437,7 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) FPWV *addr = (FPWV *) dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -454,11 +451,11 @@ static int write_data (flash_info_t * info, ulong dest, FPW data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (1); } diff --git a/board/xaeniax/flash.c b/board/xaeniax/flash.c index b051c89..6cb0aca 100644 --- a/board/xaeniax/flash.c +++ b/board/xaeniax/flash.c @@ -221,7 +221,7 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info) int flash_erase (flash_info_t *info, int s_first, int s_last) { int flag, prot, sect; - ulong type, start, last; + ulong type, start; int rcode = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -254,9 +254,6 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("\n"); } - start = get_timer (0); - last = start; - /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); @@ -269,14 +266,14 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); *addr = (FPW) 0x00500050; /* clear status register */ *addr = (FPW) 0x00200020; /* erase setup */ *addr = (FPW) 0x00D000D0; /* erase confirm */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = (FPW) 0x00B000B0; /* suspend erase */ *addr = (FPW) 0x00FF00FF; /* reset to read mode */ @@ -393,6 +390,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) FPWV *addr = (FPWV *) dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -406,11 +404,11 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (1); } diff --git a/board/xm250/flash.c b/board/xm250/flash.c index b02149c..e825aba 100644 --- a/board/xm250/flash.c +++ b/board/xm250/flash.c @@ -250,7 +250,7 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info) int flash_erase (flash_info_t *info, int s_first, int s_last) { int flag, prot, sect; - ulong type, start, last; + ulong type, start; int rcode = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -283,9 +283,6 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("\n"); } - start = get_timer (0); - last = start; - /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); @@ -298,14 +295,14 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); *addr = (FPW) 0x00500050; /* clear status register */ *addr = (FPW) 0x00200020; /* erase setup */ *addr = (FPW) 0x00D000D0; /* erase confirm */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = (FPW) 0x00B000B0; /* suspend erase */ *addr = (FPW) 0x00FF00FF; /* reset to read mode */ @@ -422,6 +419,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) FPWV *addr = (FPWV *) dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -435,11 +433,11 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (1); } @@ -470,6 +468,7 @@ int flash_real_protect(flash_info_t *info, long sector, int prot) int rc = 0; vu_long *addr = (vu_long *)(info->start[sector]); int flag = disable_interrupts(); + ulong start; *addr = INTEL_CLEAR; /* Clear status register */ if (prot) { /* Set sector lock bit */ @@ -481,10 +480,10 @@ int flash_real_protect(flash_info_t *info, long sector, int prot) *addr = INTEL_CONFIRM; /* clear */ } - reset_timer_masked (); + start = get_timer(0); while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) { - if (get_timer_masked () > CONFIG_SYS_FLASH_UNLOCK_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) { printf("Flash lock bit operation timed out\n"); rc = 1; break; @@ -510,13 +509,13 @@ int flash_real_protect(flash_info_t *info, long sector, int prot) { if (info->protect[i]) { - reset_timer_masked (); + start = get_timer(0); addr = (vu_long *)(info->start[i]); *addr = INTEL_LOCKBIT; /* Sector lock bit */ *addr = INTEL_PROTECT; /* set */ while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) { - if (get_timer_masked () > CONFIG_SYS_FLASH_UNLOCK_TOUT) + if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) { printf("Flash lock bit operation timed out\n"); rc = 1; diff --git a/board/zylonite/flash.c b/board/zylonite/flash.c index 5ba84c6..3ee0ab8 100644 --- a/board/zylonite/flash.c +++ b/board/zylonite/flash.c @@ -224,7 +224,7 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info) int flash_erase (flash_info_t *info, int s_first, int s_last) { int flag, prot, sect; - ulong type, start, last; + ulong type, start; int rcode = 0; if ((s_first < 0) || (s_first > s_last)) { @@ -257,9 +257,6 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("\n"); } - start = get_timer (0); - last = start; - /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts (); @@ -272,14 +269,14 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) printf ("Erasing sector %2d ... ", sect); /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); *addr = (FPW) 0x00500050; /* clear status register */ *addr = (FPW) 0x00200020; /* erase setup */ *addr = (FPW) 0x00D000D0; /* erase confirm */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = (FPW) 0x00B000B0; /* suspend erase */ *addr = (FPW) 0x00FF00FF; /* reset to read mode */ @@ -396,6 +393,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) FPWV *addr = (FPWV *) dest; ulong status; int flag; + ulong start; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { @@ -409,11 +407,11 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) *addr = data; /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); + start = get_timer(0); /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { + if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (1); } |