diff options
Diffstat (limited to 'board')
-rw-r--r-- | board/Marvell/db-mv784mp-gp/binary.0 | 17 | ||||
-rw-r--r-- | board/Marvell/db-mv784mp-gp/kwbimage.cfg | 2 | ||||
-rw-r--r-- | board/maxbcm/binary.0 | 17 | ||||
-rw-r--r-- | board/maxbcm/kwbimage.cfg | 2 | ||||
-rw-r--r-- | board/maxbcm/maxbcm.c | 85 | ||||
-rw-r--r-- | board/synopsys/Kconfig | 10 | ||||
-rw-r--r-- | board/synopsys/MAINTAINERS | 1 |
7 files changed, 83 insertions, 51 deletions
diff --git a/board/Marvell/db-mv784mp-gp/binary.0 b/board/Marvell/db-mv784mp-gp/binary.0 deleted file mode 100644 index 17bfad9..0000000 --- a/board/Marvell/db-mv784mp-gp/binary.0 +++ /dev/null @@ -1,17 +0,0 @@ --------- -WARNING: --------- -This file should contain the bin_hdr generated by the original Marvell -U-Boot implementation. As this is currently not included in this -U-Boot version, we have added this placeholder, so that the U-Boot -image can be generated without errors. - -If you have a known to be working bin_hdr for your board, then you -just need to replace this text file here with the binary header -and recompile U-Boot. - -In a few weeks, mainline U-Boot will get support to generate the -bin_hdr with the DDR training code itself. By implementing this code -as SPL U-Boot. Then this file will not be needed any more and will -get removed. - diff --git a/board/Marvell/db-mv784mp-gp/kwbimage.cfg b/board/Marvell/db-mv784mp-gp/kwbimage.cfg index d7ef407..cc05792 100644 --- a/board/Marvell/db-mv784mp-gp/kwbimage.cfg +++ b/board/Marvell/db-mv784mp-gp/kwbimage.cfg @@ -9,4 +9,4 @@ VERSION 1 BOOT_FROM spi # Binary Header (bin_hdr) with DDR3 training code -BINARY board/Marvell/db-mv784mp-gp/binary.0 0000005b 00000068 +BINARY spl/u-boot-spl.bin 0000005b 00000068 diff --git a/board/maxbcm/binary.0 b/board/maxbcm/binary.0 deleted file mode 100644 index 17bfad9..0000000 --- a/board/maxbcm/binary.0 +++ /dev/null @@ -1,17 +0,0 @@ --------- -WARNING: --------- -This file should contain the bin_hdr generated by the original Marvell -U-Boot implementation. As this is currently not included in this -U-Boot version, we have added this placeholder, so that the U-Boot -image can be generated without errors. - -If you have a known to be working bin_hdr for your board, then you -just need to replace this text file here with the binary header -and recompile U-Boot. - -In a few weeks, mainline U-Boot will get support to generate the -bin_hdr with the DDR training code itself. By implementing this code -as SPL U-Boot. Then this file will not be needed any more and will -get removed. - diff --git a/board/maxbcm/kwbimage.cfg b/board/maxbcm/kwbimage.cfg index 5a3bc67..cc05792 100644 --- a/board/maxbcm/kwbimage.cfg +++ b/board/maxbcm/kwbimage.cfg @@ -9,4 +9,4 @@ VERSION 1 BOOT_FROM spi # Binary Header (bin_hdr) with DDR3 training code -BINARY board/maxbcm/binary.0 0000005b 00000068 +BINARY spl/u-boot-spl.bin 0000005b 00000068 diff --git a/board/maxbcm/maxbcm.c b/board/maxbcm/maxbcm.c index 7fc83ee..46b16ac 100644 --- a/board/maxbcm/maxbcm.c +++ b/board/maxbcm/maxbcm.c @@ -11,6 +11,9 @@ #include <asm/arch/soc.h> #include <linux/mbus.h> +#include "../drivers/ddr/mvebu/ddr3_hw_training.h" +#include "../arch/arm/mvebu-common/serdes/high_speed_env_spec.h" + DECLARE_GLOBAL_DATA_PTR; /* Base addresses for the external device chip selects */ @@ -19,8 +22,84 @@ DECLARE_GLOBAL_DATA_PTR; #define DEV_CS2_BASE 0xe2000000 #define DEV_CS3_BASE 0xe3000000 -/* Needed for dynamic (board-specific) mbus configuration */ -extern struct mvebu_mbus_state mbus_state; +/* DDR3 static configuration */ +MV_DRAM_MC_INIT ddr3_b0_maxbcm[MV_MAX_DDR3_STATIC_SIZE] = { + {0x00001400, 0x7301CC30}, /* DDR SDRAM Configuration Register */ + {0x00001404, 0x30000820}, /* Dunit Control Low Register */ + {0x00001408, 0x5515BAAB}, /* DDR SDRAM Timing (Low) Register */ + {0x0000140C, 0x38DA3F97}, /* DDR SDRAM Timing (High) Register */ + {0x00001410, 0x20100005}, /* DDR SDRAM Address Control Register */ + {0x00001414, 0x0000F3FF}, /* DDR SDRAM Open Pages Control Reg */ + {0x00001418, 0x00000e00}, /* DDR SDRAM Operation Register */ + {0x0000141C, 0x00000672}, /* DDR SDRAM Mode Register */ + {0x00001420, 0x00000004}, /* DDR SDRAM Extended Mode Register */ + {0x00001424, 0x0000F3FF}, /* Dunit Control High Register */ + {0x00001428, 0x0011A940}, /* Dunit Control High Register */ + {0x0000142C, 0x014C5134}, /* Dunit Control High Register */ + {0x0000147C, 0x0000D771}, + + {0x00001494, 0x00010000}, /* DDR SDRAM ODT Control (Low) Reg */ + {0x0000149C, 0x00000001}, /* DDR Dunit ODT Control Register */ + {0x000014A0, 0x00000001}, + {0x000014A8, 0x00000101}, + + /* Recommended Settings from Marvell for 4 x 16 bit devices: */ + {0x000014C0, 0x192424C9}, /* DRAM addr and Ctrl Driving Strenght*/ + {0x000014C4, 0xAAA24C9}, /* DRAM Data and DQS Driving Strenght */ + + /* + * DO NOT Modify - Open Mbus Window - 2G - Mbus is required for the + * training sequence + */ + {0x000200e8, 0x3FFF0E01}, + {0x00020184, 0x3FFFFFE0}, /* Close fast path Window to - 2G */ + + {0x0001504, 0x3FFFFFE1}, /* CS0 Size */ + {0x000150C, 0x00000000}, /* CS1 Size */ + {0x0001514, 0x00000000}, /* CS2 Size */ + {0x000151C, 0x00000000}, /* CS3 Size */ + + {0x0020220, 0x00000007}, /* Reserved */ + + {0x00001538, 0x0000000B}, /* Read Data Sample Delays Register */ + {0x0000153C, 0x0000000B}, /* Read Data Ready Delay Register */ + + {0x000015D0, 0x00000670}, /* MR0 */ + {0x000015D4, 0x00000044}, /* MR1 */ + {0x000015D8, 0x00000018}, /* MR2 */ + {0x000015DC, 0x00000000}, /* MR3 */ + {0x000015E0, 0x00000001}, + {0x000015E4, 0x00203c18}, /* ZQDS Configuration Register */ + {0x000015EC, 0xF800A225}, /* DDR PHY */ + + {0x0, 0x0} +}; + +MV_DRAM_MODES maxbcm_ddr_modes[MV_DDR3_MODES_NUMBER] = { + {"maxbcm_1600-800", 0xB, 0x5, 0x0, A0, ddr3_b0_maxbcm, NULL}, +}; + +extern MV_SERDES_CHANGE_M_PHY serdes_change_m_phy[]; + +/* MAXBCM: SERDES 0-4 PCIE, Serdes 7 = SGMII 0, all others = unconnected */ +MV_BIN_SERDES_CFG maxbcm_serdes_cfg[] = { + { MV_PEX_ROOT_COMPLEX, 0x20011111, 0x00000000, + { PEX_BUS_MODE_X1, PEX_BUS_MODE_X1, PEX_BUS_DISABLED, + PEX_BUS_DISABLED }, + 0x1f, serdes_change_m_phy + } +}; + +MV_DRAM_MODES *ddr3_get_static_ddr_mode(void) +{ + /* Only one mode supported for this board */ + return &maxbcm_ddr_modes[0]; +} + +MV_BIN_SERDES_CFG *board_serdes_cfg_get(u8 pex_mode) +{ + return &maxbcm_serdes_cfg[0]; +} int board_early_init_f(void) { @@ -63,9 +142,7 @@ int checkboard(void) /* Configure and enable MV88E6185 switch */ void reset_phy(void) { - u16 devadr = CONFIG_PHY_BASE_ADDR; char *name = "neta0"; - u16 reg; if (miiphy_set_current_dev(name)) return; diff --git a/board/synopsys/Kconfig b/board/synopsys/Kconfig index f614f88..8ab48cd 100644 --- a/board/synopsys/Kconfig +++ b/board/synopsys/Kconfig @@ -7,13 +7,3 @@ config SYS_CONFIG_NAME default "arcangel4" endif - -if TARGET_ARCANGEL4_BE - -config SYS_VENDOR - default "synopsys" - -config SYS_CONFIG_NAME - default "arcangel4-be" - -endif diff --git a/board/synopsys/MAINTAINERS b/board/synopsys/MAINTAINERS index 720edd8..43114ce 100644 --- a/board/synopsys/MAINTAINERS +++ b/board/synopsys/MAINTAINERS @@ -3,5 +3,4 @@ M: Alexey Brodkin <abrodkin@synopsys.com> S: Maintained F: include/configs/arcangel4.h F: configs/arcangel4_defconfig -F: include/configs/arcangel4-be.h F: configs/arcangel4-be_defconfig |