summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/renesas/lager/lager.c59
1 files changed, 58 insertions, 1 deletions
diff --git a/board/renesas/lager/lager.c b/board/renesas/lager/lager.c
index d35d20f..83260a1 100644
--- a/board/renesas/lager/lager.c
+++ b/board/renesas/lager/lager.c
@@ -22,6 +22,7 @@
#include <asm/arch/rmobile.h>
#include <asm/arch/rcar-mstp.h>
#include <asm/arch/mmc.h>
+#include <asm/arch/sh_sdhi.h>
#include <miiphy.h>
#include <i2c.h>
#include <mmc.h>
@@ -60,6 +61,15 @@ void s_init(void)
#define ETHER_MSTP813 (1 << 13)
#define MMC1_MSTP305 (1 << 5)
+#define MSTPSR3 0xE6150048
+#define SMSTPCR3 0xE615013C
+#define SDHI0_MSTP314 (1 << 14)
+#define SDHI1_MSTP313 (1 << 13)
+#define SDHI2_MSTP312 (1 << 12)
+
+#define SD2CKCR 0xE6150078
+#define SD2_97500KHZ 0x7
+
int board_early_init_f(void)
{
/* TMU0 */
@@ -70,6 +80,14 @@ int board_early_init_f(void)
mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813);
/* eMMC */
mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC1_MSTP305);
+ /* SDHI0, 2 */
+ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SDHI0_MSTP314 | SDHI2_MSTP312);
+
+ /*
+ * SD0 clock is set to 97.5MHz by default.
+ * Set SD2 to the 97.5MHz as well.
+ */
+ writel(SD2_97500KHZ, SD2CKCR);
return 0;
}
@@ -150,7 +168,7 @@ int board_phy_config(struct phy_device *phydev)
int board_mmc_init(bd_t *bis)
{
- int ret = 0;
+ int ret = -ENODEV;
#ifdef CONFIG_SH_MMCIF
gpio_request(GPIO_FN_MMC1_D0, NULL);
@@ -166,6 +184,45 @@ int board_mmc_init(bd_t *bis)
ret = mmcif_mmc_init();
#endif
+
+#ifdef CONFIG_SH_SDHI
+ gpio_request(GPIO_FN_SD0_DAT0, NULL);
+ gpio_request(GPIO_FN_SD0_DAT1, NULL);
+ gpio_request(GPIO_FN_SD0_DAT2, NULL);
+ gpio_request(GPIO_FN_SD0_DAT3, NULL);
+ gpio_request(GPIO_FN_SD0_CLK, NULL);
+ gpio_request(GPIO_FN_SD0_CMD, NULL);
+ gpio_request(GPIO_FN_SD0_CD, NULL);
+ gpio_request(GPIO_FN_SD2_DAT0, NULL);
+ gpio_request(GPIO_FN_SD2_DAT1, NULL);
+ gpio_request(GPIO_FN_SD2_DAT2, NULL);
+ gpio_request(GPIO_FN_SD2_DAT3, NULL);
+ gpio_request(GPIO_FN_SD2_CLK, NULL);
+ gpio_request(GPIO_FN_SD2_CMD, NULL);
+ gpio_request(GPIO_FN_SD2_CD, NULL);
+
+ /*
+ * SDHI 0
+ * need JP3 set to pin-1 side on board.
+ */
+ gpio_request(GPIO_GP_5_24, NULL);
+ gpio_request(GPIO_GP_5_29, NULL);
+ gpio_direction_output(GPIO_GP_5_24, 1); /* power on */
+ gpio_direction_output(GPIO_GP_5_29, 1); /* 1: 3.3V, 0: 1.8V */
+
+ ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI0_BASE, 0,
+ SH_SDHI_QUIRK_16BIT_BUF);
+ if (ret)
+ return ret;
+
+ /* SDHI 2 */
+ gpio_request(GPIO_GP_5_25, NULL);
+ gpio_request(GPIO_GP_5_30, NULL);
+ gpio_direction_output(GPIO_GP_5_25, 1); /* power on */
+ gpio_direction_output(GPIO_GP_5_30, 1); /* 1: 3.3V, 0: 1.8V */
+
+ ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI2_BASE, 2, 0);
+#endif
return ret;
}