summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/amcc/canyonlands/canyonlands.c115
-rw-r--r--board/amcc/canyonlands/u-boot.lds2
-rw-r--r--board/esd/du440/du440.c5
-rw-r--r--board/esd/du440/du440.h1
-rw-r--r--board/esd/pmc440/cmd_pmc440.c53
-rw-r--r--board/esd/pmc440/pmc440.c313
-rw-r--r--board/korat/config.mk16
-rw-r--r--board/korat/init.S31
-rw-r--r--board/korat/korat.c232
-rw-r--r--board/korat/u-boot-F7FC.lds143
-rw-r--r--board/lwmon5/sdram.c90
-rw-r--r--board/prodrive/alpr/alpr.c25
-rw-r--r--board/prodrive/alpr/init.S9
13 files changed, 702 insertions, 333 deletions
diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c
index 36779f5..9986e9a 100644
--- a/board/amcc/canyonlands/canyonlands.c
+++ b/board/amcc/canyonlands/canyonlands.c
@@ -32,13 +32,20 @@ extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
DECLARE_GLOBAL_DATA_PTR;
+#define CFG_BCSR3_PCIE 0x10
+
+#define BOARD_CANYONLANDS_PCIE 1
+#define BOARD_CANYONLANDS_SATA 2
+#define BOARD_GLACIER 3
+
int board_early_init_f(void)
{
u32 sdr0_cust0;
+ u32 pvr = get_pvr();
- /*------------------------------------------------------------------+
+ /*
* Setup the interrupt controller polarities, triggers, etc.
- *------------------------------------------------------------------*/
+ */
mtdcr(uic0sr, 0xffffffff); /* clear all */
mtdcr(uic0er, 0x00000000); /* disable all */
mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
@@ -105,27 +112,69 @@ int board_early_init_f(void)
mtdcr(AHB_TOP, 0x8000004B);
mtdcr(AHB_BOT, 0x8000004B);
- /*
- * Configure USB-STP pins as alternate and not GPIO
- * It seems to be neccessary to configure the STP pins as GPIO
- * input at powerup (perhaps while USB reset is asserted). So
- * we configure those pins to their "real" function now.
- */
- gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
- gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
+ if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA)) {
+ /*
+ * Configure USB-STP pins as alternate and not GPIO
+ * It seems to be neccessary to configure the STP pins as GPIO
+ * input at powerup (perhaps while USB reset is asserted). So
+ * we configure those pins to their "real" function now.
+ */
+ gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
+ gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
+ }
return 0;
}
-int checkboard (void)
+static void canyonlands_sata_init(int board_type)
+{
+ u32 reg;
+
+ if (board_type == BOARD_CANYONLANDS_SATA) {
+ /* Put SATA in reset */
+ SDR_WRITE(SDR0_SRST1, 0x00020001);
+
+ /* Set the phy for SATA, not PCI-E port 0 */
+ reg = SDR_READ(PESDR0_PHY_CTL_RST);
+ SDR_WRITE(PESDR0_PHY_CTL_RST, (reg & 0xeffffffc) | 0x00000001);
+ reg = SDR_READ(PESDR0_L0CLK);
+ SDR_WRITE(PESDR0_L0CLK, (reg & 0xfffffff8) | 0x00000007);
+ SDR_WRITE(PESDR0_L0CDRCTL, 0x00003111);
+ SDR_WRITE(PESDR0_L0DRV, 0x00000104);
+
+ /* Bring SATA out of reset */
+ SDR_WRITE(SDR0_SRST1, 0x00000000);
+ }
+}
+
+int checkboard(void)
{
char *s = getenv("serial#");
u32 pvr = get_pvr();
- if ((pvr == PVR_460GT_RA) || (pvr == PVR_460GT_SE_RA))
+ if ((pvr == PVR_460GT_RA) || (pvr == PVR_460GT_SE_RA)) {
printf("Board: Glacier - AMCC PPC460GT Evaluation Board");
- else
+ gd->board_type = BOARD_GLACIER;
+ } else {
printf("Board: Canyonlands - AMCC PPC460EX Evaluation Board");
+ if (in_8((void *)(CFG_BCSR_BASE + 3)) & CFG_BCSR3_PCIE)
+ gd->board_type = BOARD_CANYONLANDS_PCIE;
+ else
+ gd->board_type = BOARD_CANYONLANDS_SATA;
+ }
+
+ switch (gd->board_type) {
+ case BOARD_CANYONLANDS_PCIE:
+ case BOARD_GLACIER:
+ puts(", 2*PCIe");
+ break;
+
+ case BOARD_CANYONLANDS_SATA:
+ puts(", 1*PCIe/1*SATA");
+ break;
+ }
+
+ printf(", Rev. %X", in_8((void *)(CFG_BCSR_BASE + 0)));
if (s != NULL) {
puts(", serial# ");
@@ -133,6 +182,8 @@ int checkboard (void)
}
putc('\n');
+ canyonlands_sata_init(gd->board_type);
+
return (0);
}
@@ -198,37 +249,36 @@ int testdram(void)
}
#endif
-/*************************************************************************
+/*
* pci_target_init
*
* The bootstrap configuration provides default settings for the pci
* inbound map (PIM). But the bootstrap config choices are limited and
* may not be sufficient for a given board.
- *
- ************************************************************************/
+ */
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller * hose )
{
- /*-------------------------------------------------------------------+
+ /*
* Disable everything
- *-------------------------------------------------------------------*/
+ */
out_le32((void *)PCIX0_PIM0SA, 0); /* disable */
out_le32((void *)PCIX0_PIM1SA, 0); /* disable */
out_le32((void *)PCIX0_PIM2SA, 0); /* disable */
out_le32((void *)PCIX0_EROMBA, 0); /* disable expansion rom */
- /*-------------------------------------------------------------------+
+ /*
* Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
* strapping options to not support sizes such as 128/256 MB.
- *-------------------------------------------------------------------*/
+ */
out_le32((void *)PCIX0_PIM0LAL, CFG_SDRAM_BASE);
out_le32((void *)PCIX0_PIM0LAH, 0);
out_le32((void *)PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
out_le32((void *)PCIX0_BAR0, 0);
- /*-------------------------------------------------------------------+
+ /*
* Program the board's subsystem id/vendor id
- *-------------------------------------------------------------------*/
+ */
out_le16((void *)PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID);
out_le16((void *)PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID);
@@ -265,13 +315,24 @@ void pcie_setup_hoses(int busno)
int ret = 0;
char *env;
unsigned int delay;
+ int start;
/*
* assume we're called after the PCIX hose is initialized, which takes
* bus ID 0 and therefore start numbering PCIe's from 1.
*/
bus = busno;
- for (i = 0; i <= 1; i++) {
+
+ /*
+ * Canyonlands with SATA enabled has only one PCIe slot
+ * (2nd one).
+ */
+ if (gd->board_type == BOARD_CANYONLANDS_SATA)
+ start = 1;
+ else
+ start = 0;
+
+ for (i = start; i <= 1; i++) {
if (is_end_point(i))
ret = ppc4xx_init_pcie_endport(i);
@@ -369,6 +430,7 @@ int misc_init_r(void)
{
u32 sdr0_srst1 = 0;
u32 eth_cfg;
+ u32 pvr = get_pvr();
/*
* Set EMAC mode/configuration (GMII, SGMII, RGMII...).
@@ -382,7 +444,10 @@ int misc_init_r(void)
/* Set the for 2 RGMII mode */
/* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */
eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL;
- eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
+ if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA))
+ eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
+ else
+ eth_cfg &= ~SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
mtsdr(SDR0_ETH_CFG, eth_cfg);
/*
@@ -407,7 +472,7 @@ void ft_board_setup(void *blob, bd_t *bd)
/* Fixup NOR mapping */
val[0] = 0; /* chip select number */
val[1] = 0; /* always 0 */
- val[2] = gd->bd->bi_flashstart;
+ val[2] = CFG_FLASH_BASE_PHYS_L; /* we fixed up this address */
val[3] = gd->bd->bi_flashsize;
rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
val, sizeof(val), 1);
diff --git a/board/amcc/canyonlands/u-boot.lds b/board/amcc/canyonlands/u-boot.lds
index 7496f48..3df6ad4 100644
--- a/board/amcc/canyonlands/u-boot.lds
+++ b/board/amcc/canyonlands/u-boot.lds
@@ -139,8 +139,6 @@ SECTIONS
*(COMMON)
}
- ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
-
_end = . ;
PROVIDE (end = .);
}
diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c
index ceb128c..3dbb2e1 100644
--- a/board/esd/du440/du440.c
+++ b/board/esd/du440/du440.c
@@ -67,12 +67,12 @@ int board_early_init_f(void)
out_be32((void*)GPIO1_OR, 0x00000000);
out_be32((void*)GPIO1_TCR, 0xc2000000 |
CFG_GPIO1_IORSTN |
+ CFG_GPIO1_IORST2N |
CFG_GPIO1_LEDUSR1 |
CFG_GPIO1_LEDUSR2 |
CFG_GPIO1_LEDPOST |
CFG_GPIO1_LEDDU);
out_be32((void*)GPIO1_ODR, CFG_GPIO1_LEDDU);
-
out_be32((void*)GPIO1_OSRL, 0x5c280000);
out_be32((void*)GPIO1_OSRH, 0x00000000);
out_be32((void*)GPIO1_TSRL, 0x0c000000);
@@ -243,7 +243,8 @@ int misc_init_r(void)
* release IO-RST#
* We have to wait at least 560ms until we may call usbhub_init
*/
- out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | CFG_GPIO1_IORSTN);
+ out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) |
+ CFG_GPIO1_IORSTN | CFG_GPIO1_IORST2N);
/*
* flash USR1/2 LEDs (600ms)
diff --git a/board/esd/du440/du440.h b/board/esd/du440/du440.h
index 5c362e4..83fdac7 100644
--- a/board/esd/du440/du440.h
+++ b/board/esd/du440/du440.h
@@ -24,6 +24,7 @@
#define CFG_GPIO1_DCF77 (0x80000000 >> (42-32)) /* GPIO1_42 */
#define CFG_GPIO1_IORSTN (0x80000000 >> (55-32)) /* GPIO1_55 */
+#define CFG_GPIO1_IORST2N (0x80000000 >> (47-32)) /* GPIO1_47 */
#define CFG_GPIO1_HWVER_MASK 0x000000f0 /* GPIO1_56-59 */
#define CFG_GPIO1_HWVER_SHIFT 4
diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c
index 350af48..90d9309 100644
--- a/board/esd/pmc440/cmd_pmc440.c
+++ b/board/esd/pmc440/cmd_pmc440.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
* Matthias Fuchs, esd Gmbh, matthias.fuchs@esd-electronics.com.
*
* See file CREDITS for list of people who contributed to this
@@ -21,7 +21,6 @@
* MA 02111-1307 USA
*
*/
-
#include <common.h>
#include <command.h>
#include <asm/io.h>
@@ -31,7 +30,8 @@
#include "pmc440.h"
int is_monarch(void);
-int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
+int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
+ uchar *buffer, unsigned cnt);
int eeprom_write_enable(unsigned dev_addr, int state);
DECLARE_GLOBAL_DATA_PTR;
@@ -64,7 +64,6 @@ int fpga_interrupt(u32 arg)
return rc;
}
-
int do_waithci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
@@ -100,7 +99,6 @@ U_BOOT_CMD(
NULL
);
-
void dump_fifo(pmc440_fpga_t *fpga, int f, int *n)
{
u32 ctrl;
@@ -117,7 +115,6 @@ void dump_fifo(pmc440_fpga_t *fpga, int f, int *n)
}
}
-
int do_fifo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
@@ -200,7 +197,8 @@ int do_fifo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
got_fifoirq = 0;
/* unmask global fifo irq */
FPGA_OUT32(&fpga->hostctrl,
- HOSTCTRL_FIFOIE_GATE | HOSTCTRL_FIFOIE_FLAG);
+ HOSTCTRL_FIFOIE_GATE |
+ HOSTCTRL_FIFOIE_FLAG);
}
}
@@ -237,7 +235,8 @@ int do_fifo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
for (i=0; i<n; i++)
FPGA_OUT32(&fpga->fifo[f].data, data);
} else {
- printf("writing %d x %08x to fifo port at address %08x\n",
+ printf("writing %d x %08x to fifo port at "
+ "address %08x\n",
n, data, f);
for (i=0; i<n; i++)
out32(f, data);
@@ -263,10 +262,10 @@ U_BOOT_CMD(
" - without arguments: print all fifo's status\n"
" - with 'wait' argument: interrupt driven read from all fifos\n"
" - with 'read' argument: read current contents from all fifos\n"
- " - with 'write' argument: write 'data' 'cnt' times to 'fifo' or 'address'\n"
+ " - with 'write' argument: write 'data' 'cnt' times to "
+ "'fifo' or 'address'\n"
);
-
int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
ulong sdsdp[5];
@@ -301,10 +300,12 @@ int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]
sdsdp[2]=0x40082350;
sdsdp[3]=0x0d050000;
} else if (!strcmp(argv[1], "test")) {
- /* TODO: this will replace the 667 MHz config above.
+ /*
+ * TODO: this will replace the 667 MHz config above.
* But it needs some more testing on a real 667 MHz CPU.
*/
- printf("Bootstrapping for test (667MHz PLB=133PLB PLB/PCI=3)\n");
+ printf("Bootstrapping for test"
+ " (667MHz PLB=133PLB PLB/PCI=3)\n");
sdsdp[0]=0x8778a256;
sdsdp[1]=0x095fa030;
sdsdp[2]=0x40082350;
@@ -347,7 +348,6 @@ U_BOOT_CMD(
"<cpufreq:400|533|667> [<console-uart:0|1> [<bringup delay (0..20s)>]]"
);
-
#if defined(CONFIG_PRAM)
#include <environment.h>
extern env_t *env_ptr;
@@ -394,7 +394,6 @@ U_BOOT_CMD(
);
#endif /* CONFIG_PRAM */
-
int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
if (argc > 1) {
@@ -423,7 +422,6 @@ U_BOOT_CMD(
NULL
);
-
int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA;
@@ -444,7 +442,8 @@ int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
/* deassert */
printf("PMC-RESETOUT# deasserted\n");
FPGA_OUT32(&fpga->hostctrl,
- HOSTCTRL_PMCRSTOUT_GATE | HOSTCTRL_PMCRSTOUT_FLAG);
+ HOSTCTRL_PMCRSTOUT_GATE |
+ HOSTCTRL_PMCRSTOUT_FLAG);
}
} else {
printf("PMC-RESETOUT# is %s\n",
@@ -460,7 +459,6 @@ U_BOOT_CMD(
NULL
);
-
int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
if (is_monarch()) {
@@ -481,7 +479,9 @@ int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
in_be32((void*)GPIO1_TCR) & ~GPIO1_INTA_FAKE);
}
} else {
- printf("inta# is %s\n", in_be32((void*)GPIO1_TCR) & GPIO1_INTA_FAKE ? "active" : "inactive");
+ printf("inta# is %s\n",
+ in_be32((void*)GPIO1_TCR) & GPIO1_INTA_FAKE ?
+ "active" : "inactive");
}
return 0;
}
@@ -491,7 +491,6 @@ U_BOOT_CMD(
NULL
);
-
/* test-only */
int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
@@ -503,11 +502,17 @@ int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
pciaddr &= 0xf0000000;
/* map PCI address at 0xc0000000 in PLB space */
- out32r(PCIX0_PMM1MA, 0x00000000); /* PMM1 Mask/Attribute - disabled b4 setting */
- out32r(PCIX0_PMM1LA, 0xc0000000); /* PMM1 Local Address */
- out32r(PCIX0_PMM1PCILA, pciaddr); /* PMM1 PCI Low Address */
- out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM1 PCI High Address */
- out32r(PCIX0_PMM1MA, 0xf0000001); /* 256MB + No prefetching, and enable region */
+
+ /* PMM1 Mask/Attribute - disabled b4 setting */
+ out32r(PCIX0_PMM1MA, 0x00000000);
+ /* PMM1 Local Address */
+ out32r(PCIX0_PMM1LA, 0xc0000000);
+ /* PMM1 PCI Low Address */
+ out32r(PCIX0_PMM1PCILA, pciaddr);
+ /* PMM1 PCI High Address */
+ out32r(PCIX0_PMM1PCIHA, 0x00000000);
+ /* 256MB + No prefetching, and enable region */
+ out32r(PCIX0_PMM1MA, 0xf0000001);
} else {
printf("Usage:\npmm %s\n", cmdtp->help);
}
diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c
index edf3a14..5b811bb 100644
--- a/board/esd/pmc440/pmc440.c
+++ b/board/esd/pmc440/pmc440.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
* Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com.
* Based on board/amcc/sequoia/sequoia.c
*
@@ -32,6 +32,7 @@
#include <ppc440.h>
#include <asm/processor.h>
#include <asm/io.h>
+#include <asm/bitops.h>
#include <command.h>
#include <i2c.h>
#ifdef CONFIG_RESET_PHY_R
@@ -43,12 +44,12 @@
DECLARE_GLOBAL_DATA_PTR;
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
ulong flash_get_size(ulong base, int banknum);
int pci_is_66mhz(void);
-int bootstrap_eeprom_read(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
-
+int bootstrap_eeprom_read(unsigned dev_addr, unsigned offset,
+ uchar *buffer, unsigned cnt);
struct serial_device *default_serial_console(void)
{
@@ -70,7 +71,8 @@ struct serial_device *default_serial_console(void)
/* mark scratchreg valid */
scratchreg = (scratchreg & 0xffffff00) | 0x80;
- i = bootstrap_eeprom_read(CFG_I2C_BOOT_EEPROM_ADDR, 0x10, buf, 4);
+ i = bootstrap_eeprom_read(CFG_I2C_BOOT_EEPROM_ADDR,
+ 0x10, buf, 4);
if ((i != -1) && (buf[0] == 0x19) && (buf[1] == 0x75)) {
scratchreg |= buf[2];
@@ -99,10 +101,10 @@ int board_early_init_f(void)
mtdcr(ebccfga, xbcfg);
mtdcr(ebccfgd, 0xf8400000);
- /*--------------------------------------------------------------------
+ /*
* Setup the GPIO pins
* TODO: setup GPIOs via CFG_4xx_GPIO_TABLE in board's config file
- *-------------------------------------------------------------------*/
+ */
out32(GPIO0_OR, 0x40000002);
out32(GPIO0_TCR, 0x4c90011f);
out32(GPIO0_OSRL, 0x28011400);
@@ -141,9 +143,9 @@ int board_early_init_f(void)
mtspr(dbcr0, 0x20000000); /* do chip reset */
}
- /*--------------------------------------------------------------------
+ /*
* Setup the interrupt controller polarities, triggers, etc.
- *-------------------------------------------------------------------*/
+ */
mtdcr(uic0sr, 0xffffffff); /* clear all */
mtdcr(uic0er, 0x00000000); /* disable all */
mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
@@ -170,9 +172,11 @@ int board_early_init_f(void)
/* select Ethernet pins */
mfsdr(SDR0_PFC1, sdr0_pfc1);
- sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | SDR0_PFC1_SELECT_CONFIG_4;
+ sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
+ SDR0_PFC1_SELECT_CONFIG_4;
mfsdr(SDR0_PFC2, sdr0_pfc2);
- sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | SDR0_PFC2_SELECT_CONFIG_4;
+ sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
+ SDR0_PFC2_SELECT_CONFIG_4;
/* enable 2nd IIC */
sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL;
@@ -192,9 +196,9 @@ int board_early_init_f(void)
return 0;
}
-/*---------------------------------------------------------------------------+
- | misc_init_r.
- +---------------------------------------------------------------------------*/
+/*
+ * misc_init_r.
+ */
int misc_init_r(void)
{
uint pbcr;
@@ -221,32 +225,7 @@ int misc_init_r(void)
mtdcr(ebccfga, pb0cr);
#endif
pbcr = mfdcr(ebccfgd);
- switch (gd->bd->bi_flashsize) {
- case 1 << 20:
- size_val = 0;
- break;
- case 2 << 20:
- size_val = 1;
- break;
- case 4 << 20:
- size_val = 2;
- break;
- case 8 << 20:
- size_val = 3;
- break;
- case 16 << 20:
- size_val = 4;
- break;
- case 32 << 20:
- size_val = 5;
- break;
- case 64 << 20:
- size_val = 6;
- break;
- case 128 << 20:
- size_val = 7;
- break;
- }
+ size_val = ffs(gd->bd->bi_flashsize) - 21;
pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
mtdcr(ebccfga, pb2cr);
@@ -286,20 +265,22 @@ int misc_init_r(void)
mfsdr(SDR0_USB2H0CR, usb2h0cr);
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
- /* An 8-bit/60MHz interface is the only possible alternative
- when connecting the Device to the PHY */
+ /*
+ * An 8-bit/60MHz interface is the only possible alternative
+ * when connecting the Device to the PHY
+ */
usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
- usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/
+ usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;
usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
@@ -309,7 +290,7 @@ int misc_init_r(void)
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
mtsdr(SDR0_USB2H0CR, usb2h0cr);
- /*clear resets*/
+ /* clear resets */
udelay(1000);
mtsdr(SDR0_SRST1, 0x00000000);
udelay(1000);
@@ -317,18 +298,18 @@ int misc_init_r(void)
printf("USB: Host\n");
- } else if ((strcmp(act, "dev") == 0) || (in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)) {
- /*-------------------PATCH-------------------------------*/
+ } else if ((strcmp(act, "dev") == 0) ||
+ (in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)) {
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
udelay (1000);
@@ -344,7 +325,6 @@ int misc_init_r(void)
udelay (1000);
mtsdr(SDR0_SRST1, 0x60306000);
- /*-------------------PATCH-------------------------------*/
/* SDR Setting */
mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
@@ -353,23 +333,23 @@ int misc_init_r(void)
mfsdr(SDR0_PFC1, sdr0_pfc1);
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; /*1*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV;
usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV; /*0*/
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV;
usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
- usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ; /*0*/
+ usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ;
usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
- sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL; /*1*/
+ sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL;
mtsdr(SDR0_USB2H0CR, usb2h0cr);
mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
@@ -453,43 +433,42 @@ void pmc440_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
}
#endif
-/*************************************************************************
- * pci_pre_init
- *
- * This routine is called just prior to registering the hose and gives
- * the board the opportunity to check things. Returning a value of zero
- * indicates that things are bad & PCI initialization should be aborted.
+/*
+ * pci_pre_init
*
- * Different boards may wish to customize the pci controller structure
- * (add regions, override default access routines, etc) or perform
- * certain pre-initialization actions.
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
*
- ************************************************************************/
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ */
#if defined(CONFIG_PCI)
int pci_pre_init(struct pci_controller *hose)
{
unsigned long addr;
- /*-------------------------------------------------------------------------+
- | Set priority for all PLB3 devices to 0.
- | Set PLB3 arbiter to fair mode.
- +-------------------------------------------------------------------------*/
+ /*
+ * Set priority for all PLB3 devices to 0.
+ * Set PLB3 arbiter to fair mode.
+ */
mfsdr(sdr_amp1, addr);
mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
addr = mfdcr(plb3_acr);
mtdcr(plb3_acr, addr | 0x80000000);
- /*-------------------------------------------------------------------------+
- | Set priority for all PLB4 devices to 0.
- +-------------------------------------------------------------------------*/
+ /*
+ * Set priority for all PLB4 devices to 0.
+ */
mfsdr(sdr_amp0, addr);
mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
mtdcr(plb4_acr, addr);
- /*-------------------------------------------------------------------------+
- | Set Nebula PLB4 arbiter to fair mode.
- +-------------------------------------------------------------------------*/
+ /*
+ * Set Nebula PLB4 arbiter to fair mode.
+ */
/* Segment0 */
addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
@@ -512,64 +491,84 @@ int pci_pre_init(struct pci_controller *hose)
}
#endif /* defined(CONFIG_PCI) */
-/*************************************************************************
- * pci_target_init
- *
- * The bootstrap configuration provides default settings for the pci
- * inbound map (PIM). But the bootstrap config choices are limited and
- * may not be sufficient for a given board.
+/*
+ * pci_target_init
*
- ************************************************************************/
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ */
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller *hose)
{
- /*--------------------------------------------------------------------------+
+ char *ptmla_str, *ptmms_str;
+
+ /*
* Set up Direct MMIO registers
- *--------------------------------------------------------------------------*/
- /*--------------------------------------------------------------------------+
- | PowerPC440EPX PCI Master configuration.
- | Map one 1Gig range of PLB/processor addresses to PCI memory space.
- | PLB address 0x80000000-0xBFFFFFFF ==> PCI address 0x80000000-0xBFFFFFFF
- | Use byte reversed out routines to handle endianess.
- | Make this region non-prefetchable.
- +--------------------------------------------------------------------------*/
- out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
+ */
+ /*
+ * PowerPC440EPX PCI Master configuration.
+ * Map one 1Gig range of PLB/processor addresses to PCI memory space.
+ * PLB address 0x80000000-0xBFFFFFFF
+ * ==> PCI address 0x80000000-0xBFFFFFFF
+ * Use byte reversed out routines to handle endianess.
+ * Make this region non-prefetchable.
+ */
+ out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */
+ /* - disabled b4 setting */
out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
- out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
- out32r(PCIX0_PMM0MA, 0xc0000001); /* 1G + No prefetching, and enable region */
+ out32r(PCIX0_PMM0MA, 0xc0000001); /* 1G + No prefetching, */
+ /* and enable region */
if (!is_monarch()) {
- /* BAR1: top 64MB of RAM */
- out32r(PCIX0_PTM1MS, 0xfc000001); /* Memory Size/Attribute */
- out32r(PCIX0_PTM1LA, 0x0c000000); /* Local Addr. Reg */
+ ptmla_str = getenv("ptm1la");
+ ptmms_str = getenv("ptm1ms");
+ if(NULL != ptmla_str && NULL != ptmms_str ) {
+ out32r(PCIX0_PTM1MS,
+ simple_strtoul(ptmms_str, NULL, 16));
+ out32r(PCIX0_PTM1LA,
+ simple_strtoul(ptmla_str, NULL, 16));
+ } else {
+ /* BAR1: default top 64MB of RAM */
+ out32r(PCIX0_PTM1MS, 0xfc000001);
+ out32r(PCIX0_PTM1LA, 0x0c000000);
+ }
} else {
- /* BAR1: complete 256MB RAM (TODO: make dynamic) */
- out32r(PCIX0_PTM1MS, 0xf0000001); /* Memory Size/Attribute */
- out32r(PCIX0_PTM1LA, 0x00000000); /* Local Addr. Reg */
+ /* BAR1: default: complete 256MB RAM */
+ out32r(PCIX0_PTM1MS, 0xf0000001);
+ out32r(PCIX0_PTM1LA, 0x00000000);
}
- /* BAR2: 16 MB FPGA registers */
- out32r(PCIX0_PTM2MS, 0xff000001); /* Memory Size/Attribute */
- out32r(PCIX0_PTM2LA, 0xef000000); /* Local Addr. Reg */
+ ptmla_str = getenv("ptm2la"); /* Local Addr. Reg */
+ ptmms_str = getenv("ptm2ms"); /* Memory Size/Attribute */
+ if(NULL != ptmla_str && NULL != ptmms_str ) {
+ out32r(PCIX0_PTM2MS, simple_strtoul(ptmms_str, NULL, 16));
+ out32r(PCIX0_PTM2LA, simple_strtoul(ptmla_str, NULL, 16));
+ } else {
+ /* BAR2: default: 16 MB FPGA + registers */
+ out32r(PCIX0_PTM2MS, 0xff000001); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM2LA, 0xef000000); /* Local Addr. Reg */
+ }
if (is_monarch()) {
/* BAR2: map FPGA registers behind system memory at 1GB */
pci_write_config_dword(0, PCI_BASE_ADDRESS_2, 0x40000008);
}
- /*--------------------------------------------------------------------------+
+ /*
* Set up Configuration registers
- *--------------------------------------------------------------------------*/
+ */
/* Program the board's vendor id */
pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
CFG_PCI_SUBSYS_VENDORID);
-#if 0 /* disabled for PMC405 backward compatibility */
+ /* disabled for PMC405 backward compatibility */
/* Configure command register as bus master */
- pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
-#endif
+ /* pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); */
+
/* 240nS PCI clock */
pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
@@ -587,8 +586,10 @@ void pci_target_init(struct pci_controller *hose)
CFG_PCI_CLASSCODE_NONMONARCH);
/* PCI configuration done: release ERREADY */
- out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_PPC_EREADY);
- out_be32((void*)GPIO1_TCR, in_be32((void*)GPIO1_TCR) | GPIO1_PPC_EREADY);
+ out_be32((void*)GPIO1_OR,
+ in_be32((void*)GPIO1_OR) | GPIO1_PPC_EREADY);
+ out_be32((void*)GPIO1_TCR,
+ in_be32((void*)GPIO1_TCR) | GPIO1_PPC_EREADY);
} else {
/* Program the board's subsystem id/classcode */
pci_write_config_word(0, PCI_SUBSYSTEM_ID,
@@ -599,20 +600,19 @@ void pci_target_init(struct pci_controller *hose)
}
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
-/*************************************************************************
- * pci_master_init
- *
- ************************************************************************/
+/*
+ * pci_master_init
+ */
#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
void pci_master_init(struct pci_controller *hose)
{
unsigned short temp_short;
- /*--------------------------------------------------------------------------+
- | Write the PowerPC440 EP PCI Configuration regs.
- | Enable PowerPC440 EP to be a master on the PCI bus (PMM).
- | Enable PowerPC440 EP to act as a PCI memory target (PTM).
- +--------------------------------------------------------------------------*/
+ /*
+ * Write the PowerPC440 EP PCI Configuration regs.
+ * Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+ * Enable PowerPC440 EP to act as a PCI memory target (PTM).
+ */
if (is_monarch()) {
pci_read_config_word(0, PCI_COMMAND, &temp_short);
pci_write_config_word(0, PCI_COMMAND,
@@ -622,7 +622,6 @@ void pci_master_init(struct pci_controller *hose)
}
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
-
static void wait_for_pci_ready(void)
{
int i;
@@ -649,22 +648,19 @@ static void wait_for_pci_ready(void)
}
}
-
-/*************************************************************************
- * is_pci_host
- *
- * This routine is called to determine if a pci scan should be
- * performed. With various hardware environments (especially cPCI and
- * PPMC) it's insufficient to depend on the state of the arbiter enable
- * bit in the strap register, or generic host/adapter assumptions.
- *
- * Rather than hard-code a bad assumption in the general 440 code, the
- * 440 pci code requires the board to decide at runtime.
+/*
+ * is_pci_host
*
- * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
*
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
*
- ************************************************************************/
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ */
#if defined(CONFIG_PCI)
int is_pci_host(struct pci_controller *hose)
{
@@ -681,6 +677,7 @@ int is_pci_host(struct pci_controller *hose)
return 0;
}
#endif /* defined(CONFIG_PCI) */
+
#if defined(CONFIG_POST)
/*
* Returns 1 if keys pressed to start the power-on long-running tests
@@ -692,7 +689,6 @@ int post_hotkeys_pressed(void)
}
#endif /* CONFIG_POST */
-
#ifdef CONFIG_RESET_PHY_R
void reset_phy(void)
{
@@ -713,17 +709,19 @@ void reset_phy(void)
#endif
#if defined(CFG_EEPROM_WREN)
-/* Input: <dev_addr> I2C address of EEPROM device to enable.
- * <state> -1: deliver current state
+/*
+ * Input: <dev_addr> I2C address of EEPROM device to enable.
+ * <state> -1: deliver current state
* 0: disable write
* 1: enable write
- * Returns: -1: wrong device address
- * 0: dis-/en- able done
+ * Returns: -1: wrong device address
+ * 0: dis-/en- able done
* 0/1: current state if <state> was -1.
*/
int eeprom_write_enable(unsigned dev_addr, int state)
{
- if ((CFG_I2C_EEPROM_ADDR != dev_addr) && (CFG_I2C_BOOT_EEPROM_ADDR != dev_addr)) {
+ if ((CFG_I2C_EEPROM_ADDR != dev_addr) &&
+ (CFG_I2C_BOOT_EEPROM_ADDR != dev_addr)) {
return -1;
} else {
switch (state) {
@@ -747,9 +745,9 @@ int eeprom_write_enable(unsigned dev_addr, int state)
}
#endif /* #if defined(CFG_EEPROM_WREN) */
-
#define CFG_BOOT_EEPROM_PAGE_WRITE_BITS 3
-int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
+int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset,
+ uchar *buffer, unsigned cnt)
{
unsigned end = offset + cnt;
unsigned blk_off;
@@ -758,7 +756,8 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, un
#if defined(CFG_EEPROM_WREN)
eeprom_write_enable(dev_addr, 1);
#endif
- /* Write data until done or would cross a write page boundary.
+ /*
+ * Write data until done or would cross a write page boundary.
* We must write the address again when changing pages
* because the address counter only increments within a page.
*/
@@ -780,7 +779,8 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, un
#define BOOT_EEPROM_PAGE_SIZE (1 << CFG_BOOT_EEPROM_PAGE_WRITE_BITS)
#define BOOT_EEPROM_PAGE_OFFSET(x) ((x) & (BOOT_EEPROM_PAGE_SIZE - 1))
- maxlen = BOOT_EEPROM_PAGE_SIZE - BOOT_EEPROM_PAGE_OFFSET(blk_off);
+ maxlen = BOOT_EEPROM_PAGE_SIZE -
+ BOOT_EEPROM_PAGE_OFFSET(blk_off);
if (maxlen > I2C_RXTX_LEN)
maxlen = I2C_RXTX_LEN;
@@ -803,14 +803,15 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, un
return rcode;
}
-
-int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
+int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset,
+ uchar *buffer, unsigned cnt)
{
unsigned end = offset + cnt;
unsigned blk_off;
int rcode = 0;
- /* Read data until done or would cross a page boundary.
+ /*
+ * Read data until done or would cross a page boundary.
* We must write the address again when changing pages
* because the next page may be in a different device.
*/
@@ -844,7 +845,6 @@ int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, un
return rcode;
}
-
#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_BOARD_INIT)
int usb_board_init(void)
{
@@ -854,7 +854,8 @@ int usb_board_init(void)
if ((act == NULL || strcmp(act, "hostdev") == 0) &&
!(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT))
/* enable power on USB socket */
- out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_USB_PWR_N);
+ out_be32((void*)GPIO1_OR,
+ in_be32((void*)GPIO1_OR) & ~GPIO1_USB_PWR_N);
for (i=0; i<1000; i++)
udelay(1000);
diff --git a/board/korat/config.mk b/board/korat/config.mk
index 39966e0..fa8374f 100644
--- a/board/korat/config.mk
+++ b/board/korat/config.mk
@@ -24,14 +24,24 @@
# Korat (PPC440EPx) board
#
-TEXT_BASE = 0xFFFA0000
-
PLATFORM_CPPFLAGS += -DCONFIG_440=1
ifeq ($(debug),1)
PLATFORM_CPPFLAGS += -DDEBUG
endif
+ifeq ($(emul),1)
+PLATFORM_CPPFLAGS += -fno-schedule-insns -fno-schedule-insns2
+endif
+
ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8CFF0000
+endif
+
+ifeq ($(perm),1)
+PLATFORM_CPPFLAGS += -DCONFIG_KORAT_PERMANENT
+TEXT_BASE = 0xFFFA0000
+else
+TEXT_BASE = 0xF7F60000
+LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-F7FC.lds
endif
diff --git a/board/korat/init.S b/board/korat/init.S
index bd0e8b4..bf8b2c8 100644
--- a/board/korat/init.S
+++ b/board/korat/init.S
@@ -43,7 +43,7 @@ tlbtab:
* BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
* speed up boot process. It is patched after relocation to enable SA_I
*/
- tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
+ tlbentry( 0xF0000000, SZ_256M, 0xF0000000, 1, AC_R|AC_W|AC_X|SA_G )
/*
* TLB entries for SDRAM are not needed on this platform. They are
@@ -52,24 +52,32 @@ tlbtab:
#ifdef CFG_INIT_RAM_DCACHE
/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
- tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+ tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0,
+ AC_R|AC_W|AC_X|SA_G )
#endif
/* TLB-entry for PCI Memory */
- tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
- tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE + 0x00000000, SZ_256M,
+ CFG_PCI_MEMBASE + 0x00000000, 1, AC_R|AC_W|SA_G|SA_I )
+
+ tlbentry( CFG_PCI_MEMBASE + 0x10000000, SZ_256M,
+ CFG_PCI_MEMBASE + 0x10000000, 1, AC_R|AC_W|SA_G|SA_I )
+
+ tlbentry( CFG_PCI_MEMBASE + 0x20000000, SZ_256M,
+ CFG_PCI_MEMBASE + 0x20000000, 1, AC_R|AC_W|SA_G|SA_I )
+
+ tlbentry( CFG_PCI_MEMBASE + 0x30000000, SZ_256M,
+ CFG_PCI_MEMBASE + 0x30000000, 1, AC_R|AC_W|SA_G|SA_I )
/* TLB-entry for EBC */
tlbentry( CFG_CPLD_BASE, SZ_1K, CFG_CPLD_BASE, 1, AC_R|AC_W|SA_G|SA_I )
/* TLB-entry for Internal Registers & OCM */
/* I wonder why this must be executable -- lrj@acm.org 2007-10-08 */
- tlbentry( 0xE0000000, SZ_16M, 0xE0000000, 0, AC_R|AC_W|AC_X|SA_I )
+ tlbentry( 0xE0000000, SZ_16M, 0xE0000000, 0, AC_R|AC_W|AC_X|SA_I )
/*TLB-entry PCI registers*/
- tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_R|AC_W|SA_G|SA_I )
/* TLB-entry for peripherals */
tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|SA_G|SA_I)
@@ -78,3 +86,10 @@ tlbtab:
tlbentry(0xE8000000, SZ_64K, 0xE8000000, 1, AC_R|AC_W|SA_G|SA_I)
tlbtab_end
+
+#if defined(CONFIG_KORAT_PERMANENT)
+ .globl korat_branch_absolute
+korat_branch_absolute:
+ mtlr r3
+ blr
+#endif
diff --git a/board/korat/korat.c b/board/korat/korat.c
index 90fd0a7..a7b4b27 100644
--- a/board/korat/korat.c
+++ b/board/korat/korat.c
@@ -2,12 +2,12 @@
* (C) Copyright 2007-2008
* Larry Johnson, lrj@acm.org
*
- * (C) Copyright 2006-2008
+ * (C) Copyright 2006-2007
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* (C) Copyright 2006
* Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -39,12 +39,45 @@ extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
ulong flash_get_size(ulong base, int banknum);
+#if defined(CONFIG_KORAT_PERMANENT)
+void korat_buzzer(int const on)
+{
+ if (on) {
+ out_8((u8 *) CFG_CPLD_BASE + 0x05,
+ in_8((u8 *) CFG_CPLD_BASE + 0x05) | 0x80);
+ } else {
+ out_8((u8 *) CFG_CPLD_BASE + 0x05,
+ in_8((u8 *) CFG_CPLD_BASE + 0x05) & ~0x80);
+ }
+}
+#endif
+
int board_early_init_f(void)
{
- u32 sdr0_pfc1, sdr0_pfc2;
- u32 reg;
+ uint32_t sdr0_pfc1, sdr0_pfc2;
+ uint32_t reg;
int eth;
+#if defined(CONFIG_KORAT_PERMANENT)
+ unsigned mscount;
+
+ extern void korat_branch_absolute(uint32_t addr);
+
+ for (mscount = 0; mscount < CFG_KORAT_MAN_RESET_MS; ++mscount) {
+ udelay(1000);
+ if (gpio_read_in_bit(CFG_GPIO_RESET_PRESSED_)) {
+ /* This call does not return. */
+ korat_branch_absolute(
+ CFG_FLASH1_TOP - 2 * CFG_ENV_SECT_SIZE - 4);
+ }
+ }
+ korat_buzzer(1);
+ while (!gpio_read_in_bit(CFG_GPIO_RESET_PRESSED_))
+ udelay(1000);
+
+ korat_buzzer(0);
+#endif
+
mtdcr(ebccfga, xbcfg);
mtdcr(ebccfgd, 0xb8400000);
@@ -75,8 +108,11 @@ int board_early_init_f(void)
mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */
mtdcr(uic2sr, 0xffffffff); /* clear all */
- /* take sim card reader and CF controller out of reset */
- out_8((u8 *) CFG_CPLD_BASE + 0x04, 0x80);
+ /*
+ * Take sim card reader and CF controller out of reset. Also enable PHY
+ * auto-detect until board-specific PHY resets are available.
+ */
+ out_8((u8 *) CFG_CPLD_BASE + 0x02, 0xC0);
/* Configure the two Ethernet PHYs. For each PHY, configure for fiber
* if the SFP module is present, and for copper if it is not present.
@@ -85,8 +121,8 @@ int board_early_init_f(void)
if (gpio_read_in_bit(CFG_GPIO_SFP0_PRESENT_ + eth)) {
/* SFP module not present: configure PHY for copper. */
/* Set PHY to autonegotate 10 MB, 100MB, or 1 GB */
- out_8((u8 *) CFG_CPLD_BASE + 0x06,
- in_8((u8 *) CFG_CPLD_BASE + 0x06) |
+ out_8((u8 *) CFG_CPLD_BASE + 0x03,
+ in_8((u8 *) CFG_CPLD_BASE + 0x03) |
0x06 << (4 * eth));
} else {
/* SFP module present: configure PHY for fiber and
@@ -99,10 +135,18 @@ int board_early_init_f(void)
gpio_write_bit(CFG_GPIO_PHY0_EN, 1);
gpio_write_bit(CFG_GPIO_PHY1_EN, 1);
- /* select Ethernet pins */
+ /* Wait 1 ms, then enable Fiber signal detect to PHYs. */
+ udelay(1000);
+ out_8((u8 *) CFG_CPLD_BASE + 0x03,
+ in_8((u8 *) CFG_CPLD_BASE + 0x03) | 0x88);
+
+ /* select Ethernet (and optionally IIC1) pins */
mfsdr(SDR0_PFC1, sdr0_pfc1);
sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
SDR0_PFC1_SELECT_CONFIG_4;
+#ifdef CONFIG_I2C_MULTI_BUS
+ sdr0_pfc1 |= ((sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL);
+#endif
mfsdr(SDR0_PFC2, sdr0_pfc2);
sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
SDR0_PFC2_SELECT_CONFIG_4;
@@ -116,6 +160,58 @@ int board_early_init_f(void)
return 0;
}
+/*
+ * The boot flash on CS0 normally has its write-enable pin disabled, and so will
+ * not respond to CFI commands. This routine therefore fills in the flash
+ * information for the boot flash. (The flash at CS1 operates normally.)
+ */
+ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
+{
+ uint32_t addr;
+ int i;
+
+ if (1 != banknum)
+ return 0;
+
+ info->size = CFG_FLASH0_SIZE;
+ info->sector_count = CFG_FLASH0_SIZE / 0x20000;
+ info->flash_id = 0x01000000;
+ info->portwidth = 2;
+ info->chipwidth = 2;
+ info->buffer_size = 32;
+ info->erase_blk_tout = 16384;
+ info->write_tout = 2;
+ info->buffer_write_tout = 5;
+ info->vendor = 2;
+ info->cmd_reset = 0x00F0;
+ info->interface = 2;
+ info->legacy_unlock = 0;
+ info->manufacturer_id = 1;
+ info->device_id = 0x007E;
+
+#if CFG_FLASH0_SIZE == 0x01000000
+ info->device_id2 = 0x2101;
+#elif CFG_FLASH0_SIZE == 0x04000000
+ info->device_id2 = 0x2301;
+#else
+#error Unable to set device_id2 for current CFG_FLASH0_SIZE
+#endif
+
+ info->ext_addr = 0x0040;
+ info->cfi_version = 0x3133;
+ info->cfi_offset = 0x0055;
+ info->addr_unlock1 = 0x00000555;
+ info->addr_unlock2 = 0x000002AA;
+ info->name = "CFI conformant";
+ for (i = 0, addr = -info->size;
+ i < info->sector_count;
+ ++i, addr += 0x20000) {
+ info->start[i] = addr;
+ info->protect[i] = 0x00;
+ }
+ return 1;
+}
+
static int man_data_read(unsigned int addr)
{
/*
@@ -189,12 +285,20 @@ static void set_serial_number(void)
* If the environmental variable "serial#" is not set, try to set it
* from the manufacturer's information serial EEPROM.
*/
- char s[MAN_SERIAL_NO_LENGTH + 1];
+ char s[MAN_INFO_LENGTH + MAN_MAC_ADDR_LENGTH + 2];
+
+ if (getenv("serial#"))
+ return;
+
+ if (!man_data_read_field(s, MAN_INFO_FIELD, MAN_INFO_LENGTH))
+ return;
+
+ s[MAN_INFO_LENGTH] = '-';
+ if (!man_data_read_field(s + MAN_INFO_LENGTH + 1, MAN_MAC_ADDR_FIELD,
+ MAN_MAC_ADDR_LENGTH))
+ return;
- if (0 == getenv("serial#") &&
- 0 != man_data_read_field(s, MAN_SERIAL_NO_FIELD,
- MAN_SERIAL_NO_LENGTH))
- setenv("serial#", s);
+ setenv("serial#", s);
}
static void set_mac_addresses(void)
@@ -204,45 +308,58 @@ static void set_mac_addresses(void)
* set, try to set them from the manufacturer's information serial
* EEPROM.
*/
- char s[MAN_MAC_ADDR_LENGTH + 1];
+
+#if MAN_MAC_ADDR_LENGTH % 2 != 0
+#error MAN_MAC_ADDR_LENGTH must be an even number
+#endif
+
+ char s[(3 * MAN_MAC_ADDR_LENGTH) / 2];
+ char *src;
+ char *dst;
if (0 != getenv("ethaddr") && 0 != getenv("eth1addr"))
return;
- if (0 == man_data_read_field(s, MAN_MAC_ADDR_FIELD,
- MAN_MAC_ADDR_LENGTH))
+ if (0 == man_data_read_field(s + (MAN_MAC_ADDR_LENGTH / 2) - 1,
+ MAN_MAC_ADDR_FIELD, MAN_MAC_ADDR_LENGTH))
return;
+ for (src = s + (MAN_MAC_ADDR_LENGTH / 2) - 1, dst = s; src != dst;) {
+ *dst++ = *src++;
+ *dst++ = *src++;
+ *dst++ = ':';
+ }
if (0 == getenv("ethaddr"))
setenv("ethaddr", s);
if (0 == getenv("eth1addr")) {
- ++s[MAN_MAC_ADDR_LENGTH - 1];
+ ++s[((3 * MAN_MAC_ADDR_LENGTH) / 2) - 2];
setenv("eth1addr", s);
}
}
int misc_init_r(void)
{
- uint pbcr;
- int size_val = 0;
- u32 reg;
+ uint32_t pbcr;
+ int size_val;
+ uint32_t reg;
unsigned long usb2d0cr = 0;
unsigned long usb2phy0cr, usb2h0cr = 0;
unsigned long sdr0_pfc1;
- char *act = getenv("usbact");
-
- /* Re-do flash sizing to get full correct info */
+ uint32_t const flash1_size = gd->bd->bi_flashsize - CFG_FLASH0_SIZE;
+ char const *const act = getenv("usbact");
- /* adjust flash start and offset */
- gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
+ /*
+ * Re-do FLASH1 sizing and adjust flash start and offset.
+ */
+ gd->bd->bi_flashstart = CFG_FLASH1_TOP - flash1_size;
gd->bd->bi_flashoffset = 0;
- mtdcr(ebccfga, pb0cr);
+ mtdcr(ebccfga, pb1cr);
pbcr = mfdcr(ebccfgd);
- size_val = ffs(gd->bd->bi_flashsize) - 21;
+ size_val = ffs(flash1_size) - 21;
pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
- mtdcr(ebccfga, pb0cr);
+ mtdcr(ebccfga, pb1cr);
mtdcr(ebccfgd, pbcr);
/*
@@ -250,14 +367,37 @@ int misc_init_r(void)
*/
flash_get_size(gd->bd->bi_flashstart, 0);
- /* Monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET, -CFG_MONITOR_LEN, 0xffffffff,
- &flash_info[0]);
+ /*
+ * Re-do FLASH1 sizing and adjust flash offset to reserve space for
+ * environment
+ */
+ gd->bd->bi_flashoffset =
+ CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - CFG_FLASH1_ADDR;
+ mtdcr(ebccfga, pb1cr);
+ pbcr = mfdcr(ebccfgd);
+ size_val = ffs(gd->bd->bi_flashsize - CFG_FLASH0_SIZE) - 21;
+ pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
+ mtdcr(ebccfga, pb1cr);
+ mtdcr(ebccfgd, pbcr);
+
+ /* Monitor protection ON by default */
+#if defined(CONFIG_KORAT_PERMANENT)
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ flash_info + 1);
+#else
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ flash_info);
+#endif
/* Env protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+ flash_info);
(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
- CFG_ENV_ADDR_REDUND + 2 * CFG_ENV_SECT_SIZE - 1,
- &flash_info[0]);
+ CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+ flash_info);
/*
* USB suff...
@@ -393,6 +533,8 @@ int misc_init_r(void)
set_serial_number();
set_mac_addresses();
+ gpio_write_bit(CFG_GPIO_ATMEGA_RESET_, 1);
+
return 0;
}
@@ -402,10 +544,10 @@ int checkboard(void)
u8 const rev = in_8((u8 *) CFG_CPLD_BASE + 0);
printf("Board: Korat, Rev. %X", rev);
- if (s != NULL)
+ if (s)
printf(", serial# %s", s);
- printf(", Ethernet PHY 0: ");
+ printf(".\n Ethernet PHY 0: ");
if (gpio_read_out_bit(CFG_GPIO_PHY0_FIBER_SEL))
printf("fiber");
else
@@ -418,7 +560,10 @@ int checkboard(void)
printf("copper");
printf(".\n");
- return (0);
+#if defined(CONFIG_KORAT_PERMANENT)
+ printf(" Executing permanent copy of U-Boot.\n");
+#endif
+ return 0;
}
#if defined(CFG_DRAM_TEST)
@@ -529,23 +674,26 @@ void pci_target_init(struct pci_controller *hose)
/*
* PowerPC440EPX PCI Master configuration.
* Map one 1Gig range of PLB/processor addresses to PCI memory space.
- * PLB address 0xA0000000-0xDFFFFFFF
- * ==> PCI address 0xA0000000-0xDFFFFFFF
+ * PLB address 0x80000000-0xBFFFFFFF
+ * ==> PCI address 0x80000000-0xBFFFFFFF
* Use byte reversed out routines to handle endianess.
* Make this region non-prefetchable.
*/
out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */
/* - disabled b4 setting */
out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
- out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM0PCILA,
+ CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */
/* and enable region */
out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */
/* - disabled b4 setting */
- out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
- out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM1LA,
+ CFG_PCI_MEMBASE + 0x20000000); /* PMM0 Local Address */
+ out32r(PCIX0_PMM1PCILA,
+ CFG_PCI_MEMBASE + 0x20000000); /* PMM0 PCI Low Address */
out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */
/* and enable region */
diff --git a/board/korat/u-boot-F7FC.lds b/board/korat/u-boot-F7FC.lds
new file mode 100644
index 0000000..cceb4f5
--- /dev/null
+++ b/board/korat/u-boot-F7FC.lds
@@ -0,0 +1,143 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xF7FBFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xF7FBF000 :
+ {
+ cpu/ppc4xx/start.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c
index affaeff..7c3cf49 100644
--- a/board/lwmon5/sdram.c
+++ b/board/lwmon5/sdram.c
@@ -6,7 +6,7 @@
* Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
* Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* This program is free software; you can redistribute it and/or
@@ -35,6 +35,7 @@
#include <asm/mmu.h>
#include <asm/io.h>
#include <ppc440.h>
+#include <watchdog.h>
/*
* This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
@@ -99,87 +100,37 @@ static void wait_ddr_idle(void)
*/
}
-static void blank_string(int size)
-{
- int i;
-
- for (i=0; i<size; i++)
- putc('\b');
- for (i=0; i<size; i++)
- putc(' ');
- for (i=0; i<size; i++)
- putc('\b');
-}
-
static void program_ecc(u32 start_address,
u32 num_bytes,
u32 tlb_word2_i_value)
{
- u32 current_address;
- u32 end_address;
- u32 address_increment;
u32 val;
- char str[] = "ECC generation -";
- char slash[] = "\\|/-\\|/-";
- int loop = 0;
- int loopi = 0;
-
- current_address = start_address;
+ u32 current_addr = start_address;
+ int bytes_remaining;
sync();
- eieio();
wait_ddr_idle();
- if (tlb_word2_i_value == TLB_WORD2_I_ENABLE) {
- /* ECC bit set method for non-cached memory */
- address_increment = 4;
- end_address = current_address + num_bytes;
-
- puts(str);
-
- while (current_address < end_address) {
- *((u32 *)current_address) = 0x00000000;
- current_address += address_increment;
-
- if ((loop++ % (2 << 20)) == 0) {
- putc('\b');
- putc(slash[loopi++ % 8]);
- }
- }
+ /*
+ * Because of 440EPx errata CHIP 11, we don't touch the last 256
+ * bytes of SDRAM.
+ */
+ bytes_remaining = num_bytes - CFG_MEM_TOP_HIDE;
- blank_string(strlen(str));
- } else {
- /* ECC bit set method for cached memory */
-#if 0 /* test-only: will remove this define later, when ECC problems are solved! */
- /*
- * Some boards (like lwmon5) need to preserve the memory
- * content upon ECC generation (for the log-buffer).
- * Therefore we don't fill the memory with a pattern or
- * just zero it, but write the same values back that are
- * already in the memory cells.
- */
- address_increment = CFG_CACHELINE_SIZE;
- end_address = current_address + num_bytes;
-
- current_address = start_address;
- while (current_address < end_address) {
- /*
- * TODO: Th following sequence doesn't work correctly.
- * Just invalidating and flushing the cache doesn't
- * seem to trigger the re-write of the memory.
- */
- ppcDcbi(current_address);
- ppcDcbf(current_address);
- current_address += CFG_CACHELINE_SIZE;
- }
-#else
- dcbz_area(start_address, num_bytes);
- dflush();
-#endif
+ /*
+ * We have to write the ECC bytes by zeroing and flushing in smaller
+ * steps, since the whole 256MByte takes too long for the external
+ * watchdog.
+ */
+ while (bytes_remaining > 0) {
+ dcbz_area(current_addr, min((64 << 20), bytes_remaining));
+ current_addr += 64 << 20;
+ bytes_remaining -= 64 << 20;
+ WATCHDOG_RESET();
}
+ dflush();
sync();
- eieio();
wait_ddr_idle();
/* Clear error status */
@@ -191,7 +142,6 @@ static void program_ecc(u32 start_address,
mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) | DDR0_01_INT_MASK_ALL_OFF));
sync();
- eieio();
wait_ddr_idle();
}
#endif
diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c
index b764499..287f32e 100644
--- a/board/prodrive/alpr/alpr.c
+++ b/board/prodrive/alpr/alpr.c
@@ -23,10 +23,12 @@
#include <common.h>
-#include <asm/processor.h>
+#include <libfdt.h>
+#include <fdt_support.h>
#include <spd_sdram.h>
#include <ppc4xx_enet.h>
#include <miiphy.h>
+#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -315,3 +317,24 @@ int post_hotkeys_pressed(void)
return (ctrlc());
}
#endif
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ u32 val[4];
+ int rc;
+
+ ft_cpu_setup(blob, bd);
+
+ /* Fixup NOR mapping */
+ val[0] = 0; /* chip select number */
+ val[1] = 0; /* always 0 */
+ val[2] = gd->bd->bi_flashstart;
+ val[3] = gd->bd->bi_flashsize;
+ rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+ val, sizeof(val), 1);
+ if (rc)
+ printf("Unable to update property NOR mapping, err=%s\n",
+ fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/prodrive/alpr/init.S b/board/prodrive/alpr/init.S
index 135674c..76164ce 100644
--- a/board/prodrive/alpr/init.S
+++ b/board/prodrive/alpr/init.S
@@ -90,7 +90,16 @@ tlbtab:
tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I )
tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X )
+#ifdef CONFIG_4xx_DCACHE
+ tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G)
+#else
tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+#endif
+
+#ifdef CFG_INIT_RAM_DCACHE
+ /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
+ tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+#endif
tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
/* PCI */