diff options
Diffstat (limited to 'board')
-rw-r--r-- | board/freescale/common/pfuze.c | 38 | ||||
-rw-r--r-- | board/freescale/common/pfuze.h | 1 | ||||
-rw-r--r-- | board/freescale/mx6qsabreauto/mx6qsabreauto.c | 6 | ||||
-rw-r--r-- | board/freescale/mx6sabresd/mx6sabresd.c | 6 | ||||
-rw-r--r-- | board/freescale/mx6sxsabresd/mx6sxsabresd.c | 6 |
5 files changed, 55 insertions, 2 deletions
diff --git a/board/freescale/common/pfuze.c b/board/freescale/common/pfuze.c index 2cd1794..4980bf7 100644 --- a/board/freescale/common/pfuze.c +++ b/board/freescale/common/pfuze.c @@ -5,9 +5,47 @@ */ #include <common.h> +#include <errno.h> #include <power/pmic.h> #include <power/pfuze100_pmic.h> +int pfuze_mode_init(struct pmic *p, u32 mode) +{ + unsigned char offset, i, switch_num; + u32 id, ret; + + pmic_reg_read(p, PFUZE100_DEVICEID, &id); + id = id & 0xf; + + if (id == 0) { + switch_num = 6; + offset = PFUZE100_SW1CMODE; + } else if (id == 1) { + switch_num = 4; + offset = PFUZE100_SW2MODE; + } else { + printf("Not supported, id=%d\n", id); + return -EINVAL; + } + + ret = pmic_reg_write(p, PFUZE100_SW1ABMODE, mode); + if (ret < 0) { + printf("Set SW1AB mode error!\n"); + return ret; + } + + for (i = 0; i < switch_num - 1; i++) { + ret = pmic_reg_write(p, offset + i * SWITCH_SIZE, mode); + if (ret < 0) { + printf("Set switch 0x%x mode error!\n", + offset + i * SWITCH_SIZE); + return ret; + } + } + + return ret; +} + struct pmic *pfuze_common_init(unsigned char i2cbus) { struct pmic *p; diff --git a/board/freescale/common/pfuze.h b/board/freescale/common/pfuze.h index 7a4126c..53cfc99 100644 --- a/board/freescale/common/pfuze.h +++ b/board/freescale/common/pfuze.h @@ -8,5 +8,6 @@ #define __PFUZE_BOARD_HELPER__ struct pmic *pfuze_common_init(unsigned char i2cbus); +int pfuze_mode_init(struct pmic *p, u32 mode); #endif diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c index a90360f..b76e4eb 100644 --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c @@ -29,6 +29,7 @@ #include <asm/arch/crm_regs.h> #include <pca953x.h> #include <power/pmic.h> +#include <power/pfuze100_pmic.h> #include "../common/pfuze.h" DECLARE_GLOBAL_DATA_PTR; @@ -494,11 +495,16 @@ int board_spi_cs_gpio(unsigned bus, unsigned cs) int power_init_board(void) { struct pmic *p; + unsigned int ret; p = pfuze_common_init(I2C_PMIC); if (!p) return -ENODEV; + ret = pfuze_mode_init(p, APS_PFM); + if (ret < 0) + return ret; + return 0; } diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index 2f7198d..bb2dd96 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -631,12 +631,16 @@ int board_init(void) int power_init_board(void) { struct pmic *p; - unsigned int reg; + unsigned int reg, ret; p = pfuze_common_init(I2C_PMIC); if (!p) return -ENODEV; + ret = pfuze_mode_init(p, APS_PFM); + if (ret < 0) + return ret; + /* Increase VGEN3 from 2.5 to 2.8V */ pmic_reg_read(p, PFUZE100_VGEN3VOL, ®); reg &= ~LDO_VOL_MASK; diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c index a2c9aae..2ff960e 100644 --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c @@ -199,12 +199,16 @@ static struct i2c_pads_info i2c_pad_info1 = { int power_init_board(void) { struct pmic *p; - unsigned int reg; + unsigned int reg, ret; p = pfuze_common_init(I2C_PMIC); if (!p) return -ENODEV; + ret = pfuze_mode_init(p, APS_PFM); + if (ret < 0) + return ret; + /* Enable power of VGEN5 3V3, needed for SD3 */ pmic_reg_read(p, PFUZE100_VGEN5VOL, ®); reg &= ~LDO_VOL_MASK; |