summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/Marvell/db64360/pci.c6
-rw-r--r--board/Marvell/db64460/pci.c6
-rw-r--r--board/amcc/katmai/cmd_katmai.c18
-rw-r--r--board/amcc/yucca/cmd_yucca.c22
-rw-r--r--board/bf537-stamp/post-memory.c24
-rw-r--r--board/cray/L1/L1.c8
-rw-r--r--board/eltec/bab7xx/misc.c2
-rw-r--r--board/esd/cpci750/pci.c6
-rw-r--r--board/esd/pci405/pci405.c2
-rw-r--r--board/fads/fads.c10
-rw-r--r--board/freescale/mpc8540ads/mpc8540ads.c4
-rw-r--r--board/freescale/mpc8541cds/mpc8541cds.c4
-rw-r--r--board/freescale/mpc8555cds/mpc8555cds.c4
-rw-r--r--board/freescale/mpc8560ads/mpc8560ads.c4
-rw-r--r--board/gen860t/beeper.c2
-rw-r--r--board/idmr/idmr.c2
-rw-r--r--board/motionpro/motionpro.c2
-rw-r--r--board/mpc8540eval/mpc8540eval.c2
-rw-r--r--board/mpl/pip405/pip405.c2
-rw-r--r--board/pm854/pm854.c4
-rw-r--r--board/pm856/pm856.c4
-rw-r--r--board/prodrive/p3mx/pci.c6
-rw-r--r--board/sbc8560/sbc8560.c2
-rw-r--r--board/siemens/IAD210/IAD210.c2
-rw-r--r--board/siemens/IAD210/atm.c2
-rw-r--r--board/tqc/tqm85xx/tqm85xx.c4
26 files changed, 77 insertions, 77 deletions
diff --git a/board/Marvell/db64360/pci.c b/board/Marvell/db64360/pci.c
index a7e3c95..4998095 100644
--- a/board/Marvell/db64360/pci.c
+++ b/board/Marvell/db64360/pci.c
@@ -52,13 +52,13 @@ static void gt_pci_bus_mode_display (PCI_HOST host)
printf ("PCI %d bus mode: Conventional PCI\n", host);
break;
case 1:
- printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
+ printf ("PCI %d bus mode: 66 MHz PCIX\n", host);
break;
case 2:
- printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
+ printf ("PCI %d bus mode: 100 MHz PCIX\n", host);
break;
case 3:
- printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
+ printf ("PCI %d bus mode: 133 MHz PCIX\n", host);
break;
default:
printf ("Unknown BUS %d\n", mode);
diff --git a/board/Marvell/db64460/pci.c b/board/Marvell/db64460/pci.c
index a7e3c95..4998095 100644
--- a/board/Marvell/db64460/pci.c
+++ b/board/Marvell/db64460/pci.c
@@ -52,13 +52,13 @@ static void gt_pci_bus_mode_display (PCI_HOST host)
printf ("PCI %d bus mode: Conventional PCI\n", host);
break;
case 1:
- printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
+ printf ("PCI %d bus mode: 66 MHz PCIX\n", host);
break;
case 2:
- printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
+ printf ("PCI %d bus mode: 100 MHz PCIX\n", host);
break;
case 3:
- printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
+ printf ("PCI %d bus mode: 133 MHz PCIX\n", host);
break;
default:
printf ("Unknown BUS %d\n", mode);
diff --git a/board/amcc/katmai/cmd_katmai.c b/board/amcc/katmai/cmd_katmai.c
index 703d225..ba71bd5 100644
--- a/board/amcc/katmai/cmd_katmai.c
+++ b/board/amcc/katmai/cmd_katmai.c
@@ -57,9 +57,9 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
do {
#ifdef CONFIG_STRESS
- printf("enter cpu clock frequency 400, 500, 533, 667 Mhz or quit to abort\n");
+ printf("enter cpu clock frequency 400, 500, 533, 667 MHz or quit to abort\n");
#else
- printf("enter cpu clock frequency 400, 500, 533 Mhz or quit to abort\n");
+ printf("enter cpu clock frequency 400, 500, 533 MHz or quit to abort\n");
#endif
nbytes = readline (" ? ");
@@ -87,11 +87,11 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
else {
do {
if (strcmp(cpuClock, "400") == 0)
- printf("enter plb clock frequency 100, 133 Mhz or quit to abort\n");
+ printf("enter plb clock frequency 100, 133 MHz or quit to abort\n");
#ifdef CONFIG_STRESS
if (strcmp(cpuClock, "667") == 0)
- printf("enter plb clock frequency 133, 166 Mhz or quit to abort\n");
+ printf("enter plb clock frequency 133, 166 MHz or quit to abort\n");
#endif
nbytes = readline (" ? ");
@@ -117,7 +117,7 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
do {
- printf("enter Pci-X clock frequency 33, 66, 100 or 133 Mhz or quit to abort\n");
+ printf("enter Pci-X clock frequency 33, 66, 100 or 133 MHz or quit to abort\n");
nbytes = readline (" ? ");
if (strcmp(console_buffer, "quit") == 0)
@@ -133,10 +133,10 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} while (nbytes == 0);
- printf("\nsys clk = %sMhz\n", sysClock);
- printf("cpu clk = %sMhz\n", cpuClock);
- printf("plb clk = %sMhz\n", plbClock);
- printf("Pci-X clk = %sMhz\n", pcixClock);
+ printf("\nsys clk = %s MHz\n", sysClock);
+ printf("cpu clk = %s MHz\n", cpuClock);
+ printf("plb clk = %s MHz\n", plbClock);
+ printf("Pci-X clk = %s MHz\n", pcixClock);
do {
printf("\npress [y] to write I2C bootstrap \n");
diff --git a/board/amcc/yucca/cmd_yucca.c b/board/amcc/yucca/cmd_yucca.c
index bd42c5d..d969860 100644
--- a/board/amcc/yucca/cmd_yucca.c
+++ b/board/amcc/yucca/cmd_yucca.c
@@ -69,7 +69,7 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
chip = IIC0_ALT_BOOTPROM_ADDR;
do {
- printf("enter sys clock frequency 33 or 66 Mhz or quit to abort\n");
+ printf("enter sys clock frequency 33 or 66 MHz or quit to abort\n");
nbytes = readline (" ? ");
if (strcmp(console_buffer, "quit") == 0)
@@ -85,12 +85,12 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
do {
if (strcmp(sysClock, "66") == 0) {
- printf("enter cpu clock frequency 400, 533 Mhz or quit to abort\n");
+ printf("enter cpu clock frequency 400, 533 MHz or quit to abort\n");
} else {
#ifdef CONFIG_STRESS
- printf("enter cpu clock frequency 400, 500, 533, 667 Mhz or quit to abort\n");
+ printf("enter cpu clock frequency 400, 500, 533, 667 MHz or quit to abort\n");
#else
- printf("enter cpu clock frequency 400, 500, 533 Mhz or quit to abort\n");
+ printf("enter cpu clock frequency 400, 500, 533 MHz or quit to abort\n");
#endif
}
nbytes = readline (" ? ");
@@ -130,11 +130,11 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
} else {
do {
if (strcmp(cpuClock, "400") == 0)
- printf("enter plb clock frequency 100, 133 Mhz or quit to abort\n");
+ printf("enter plb clock frequency 100, 133 MHz or quit to abort\n");
#ifdef CONFIG_STRESS
if (strcmp(cpuClock, "667") == 0)
- printf("enter plb clock frequency 133, 166 Mhz or quit to abort\n");
+ printf("enter plb clock frequency 133, 166 MHz or quit to abort\n");
#endif
nbytes = readline (" ? ");
@@ -160,7 +160,7 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
}
do {
- printf("enter Pci-X clock frequency 33, 66, 100 or 133 Mhz or quit to abort\n");
+ printf("enter Pci-X clock frequency 33, 66, 100 or 133 MHz or quit to abort\n");
nbytes = readline (" ? ");
if (strcmp(console_buffer, "quit") == 0)
@@ -176,10 +176,10 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
} while (nbytes == 0);
- printf("\nsys clk = %sMhz\n", sysClock);
- printf("cpu clk = %sMhz\n", cpuClock);
- printf("plb clk = %sMhz\n", plbClock);
- printf("Pci-X clk = %sMhz\n", pcixClock);
+ printf("\nsys clk = %s MHz\n", sysClock);
+ printf("cpu clk = %s MHz\n", cpuClock);
+ printf("plb clk = %s MHz\n", plbClock);
+ printf("Pci-X clk = %s MHz\n", pcixClock);
do {
printf("\npress [y] to write I2C bootstrap \n");
diff --git a/board/bf537-stamp/post-memory.c b/board/bf537-stamp/post-memory.c
index 7c36c81..889aa5c 100644
--- a/board/bf537-stamp/post-memory.c
+++ b/board/bf537-stamp/post-memory.c
@@ -27,18 +27,18 @@ const int pll[CCLK_NUM][SCLK_NUM][2] = {
{{4, 1}, {4, 2}, {4, 4}} /* CCLK = 100M */
};
const char *const log[CCLK_NUM][SCLK_NUM] = {
- {"CCLK-500Mhz SCLK-125Mhz: Writing...\0",
- "CCLK-500Mhz SCLK-100Mhz: Writing...\0",
- "CCLK-500Mhz SCLK- 50Mhz: Writing...\0",},
- {"CCLK-400Mhz SCLK-100Mhz: Writing...\0",
- "CCLK-400Mhz SCLK- 80Mhz: Writing...\0",
- "CCLK-400Mhz SCLK- 50Mhz: Writing...\0",},
- {"CCLK-200Mhz SCLK-100Mhz: Writing...\0",
- "CCLK-200Mhz SCLK- 50Mhz: Writing...\0",
- "CCLK-200Mhz SCLK- 40Mhz: Writing...\0",},
- {"CCLK-100Mhz SCLK-100Mhz: Writing...\0",
- "CCLK-100Mhz SCLK- 50Mhz: Writing...\0",
- "CCLK-100Mhz SCLK- 25Mhz: Writing...\0",},
+ {"CCLK-500MHz SCLK-125MHz: Writing...\0",
+ "CCLK-500MHz SCLK-100MHz: Writing...\0",
+ "CCLK-500MHz SCLK- 50MHz: Writing...\0",},
+ {"CCLK-400MHz SCLK-100MHz: Writing...\0",
+ "CCLK-400MHz SCLK- 80MHz: Writing...\0",
+ "CCLK-400MHz SCLK- 50MHz: Writing...\0",},
+ {"CCLK-200MHz SCLK-100MHz: Writing...\0",
+ "CCLK-200MHz SCLK- 50MHz: Writing...\0",
+ "CCLK-200MHz SCLK- 40MHz: Writing...\0",},
+ {"CCLK-100MHz SCLK-100MHz: Writing...\0",
+ "CCLK-100MHz SCLK- 50MHz: Writing...\0",
+ "CCLK-100MHz SCLK- 25MHz: Writing...\0",},
};
int memory_post_test(int flags)
diff --git a/board/cray/L1/L1.c b/board/cray/L1/L1.c
index 2babd2d..1c82bdf 100644
--- a/board/cray/L1/L1.c
+++ b/board/cray/L1/L1.c
@@ -205,13 +205,13 @@ static void init_sdram (void)
/* To set the appropriate timings, we need to know the SDRAM speed. */
/* We can use the PLB speed since the SDRAM speed is the same as */
/* the PLB speed. The PLB speed is the FBK divider times the */
-/* 405GP reference clock, which on the L1 is 25Mhz. */
-/* Thus, if FBK div is 2, SDRAM is 50Mhz; if FBK div is 3, SDRAM is */
-/* 150Mhz; if FBK is 3, SDRAM is 150Mhz. */
+/* 405GP reference clock, which on the L1 is 25MHz. */
+/* Thus, if FBK div is 2, SDRAM is 50MHz; if FBK div is 3, SDRAM is */
+/* 150MHz; if FBK is 3, SDRAM is 150MHz. */
/* divisor = ((mfdcr(strap)>> 28) & 0x3); */
-/* write SDRAM timing for 100Mhz. */
+/* write SDRAM timing for 100MHz. */
mtdcr (memcfga, mem_sdtr1);
mtdcr (memcfgd, 0x0086400D);
diff --git a/board/eltec/bab7xx/misc.c b/board/eltec/bab7xx/misc.c
index 1c94a76..bc6eb40 100644
--- a/board/eltec/bab7xx/misc.c
+++ b/board/eltec/bab7xx/misc.c
@@ -377,7 +377,7 @@ int misc_init_r (void)
{
if (pci_find_device(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C860, 0) > 0)
{
- /* BAB740 with SCSI=IRQ 11; SCC=IRQ 9; no IDE; NCR860 at 80 Mhz */
+ /* BAB740 with SCSI=IRQ 11; SCC=IRQ 9; no IDE; NCR860 at 80 MHz */
scsi_dev_id = PCI_DEVICE_ID_NCR_53C860;
scsi_max_scsi_id = 7;
scsi_sym53c8xx_ccf = 0x15;
diff --git a/board/esd/cpci750/pci.c b/board/esd/cpci750/pci.c
index cbe766f..bfc7e55 100644
--- a/board/esd/cpci750/pci.c
+++ b/board/esd/cpci750/pci.c
@@ -66,13 +66,13 @@ static void gt_pci_bus_mode_display (PCI_HOST host)
printf ("PCI %d bus mode: Conventional PCI\n", host);
break;
case 1:
- printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
+ printf ("PCI %d bus mode: 66 MHz PCIX\n", host);
break;
case 2:
- printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
+ printf ("PCI %d bus mode: 100 MHz PCIX\n", host);
break;
case 3:
- printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
+ printf ("PCI %d bus mode: 133 MHz PCIX\n", host);
break;
default:
printf ("Unknown BUS %d\n", mode);
diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c
index 4db7052..9112788 100644
--- a/board/esd/pci405/pci405.c
+++ b/board/esd/pci405/pci405.c
@@ -347,7 +347,7 @@ int checkboard (void)
if (value) {
puts(", 33 MHz PCI");
} else {
- puts(", 66 Mhz PCI");
+ puts(", 66 MHz PCI");
}
}
diff --git a/board/fads/fads.c b/board/fads/fads.c
index 278fa2a..9f7faaf 100644
--- a/board/fads/fads.c
+++ b/board/fads/fads.c
@@ -449,19 +449,19 @@ static int _initsdram(uint base, uint noMbytes)
/* Now run the precharge/nop/mrs commands.
*/
- memctl->memc_mcr = 0x80808111; /* run umpb cs4 1 count 1, addr 0x11 ??? (50Mhz) */
- /* run umpb cs4 1 count 1, addr 0x11 precharge+MRS (100Mhz) */
+ memctl->memc_mcr = 0x80808111; /* run umpb cs4 1 count 1, addr 0x11 ??? (50MHz) */
+ /* run umpb cs4 1 count 1, addr 0x11 precharge+MRS (100MHz) */
udelay(200);
/* Run 8 refresh cycles */
- memctl->memc_mcr = SDRAM_MCRVALUE0; /* run upmb cs4 loop 1 addr 0x5 precharge+MRS (50 Mhz)*/
+ memctl->memc_mcr = SDRAM_MCRVALUE0; /* run upmb cs4 loop 1 addr 0x5 precharge+MRS (50 MHz)*/
/* run upmb cs4 loop 1 addr 0x11 precharge+MRS (100MHz) */
udelay(200);
- memctl->memc_mbmr = SDRAM_MBMRVALUE1; /* TLF 4 (100 Mhz) or TLF 8 (50MHz) */
- memctl->memc_mcr = SDRAM_MCRVALUE1; /* run upmb cs4 loop 1 addr 0x30 refr (50 Mhz) */
+ memctl->memc_mbmr = SDRAM_MBMRVALUE1; /* TLF 4 (100 MHz) or TLF 8 (50MHz) */
+ memctl->memc_mcr = SDRAM_MCRVALUE1; /* run upmb cs4 loop 1 addr 0x30 refr (50 MHz) */
/* run upmb cs4 loop 1 addr 0x11 precharge+MRS ??? (100MHz) */
udelay(200);
diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c
index 7dccd37..a0b6fbd 100644
--- a/board/freescale/mpc8540ads/mpc8540ads.c
+++ b/board/freescale/mpc8540ads/mpc8540ads.c
@@ -127,8 +127,8 @@ local_bus_init(void)
* Errata LBC11.
* Fix Local Bus clock glitch when DLL is enabled.
*
- * If localbus freq is < 66Mhz, DLL bypass mode must be used.
- * If localbus freq is > 133Mhz, DLL can be safely enabled.
+ * If localbus freq is < 66MHz, DLL bypass mode must be used.
+ * If localbus freq is > 133MHz, DLL can be safely enabled.
* Between 66 and 133, the DLL is enabled with an override workaround.
*/
diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c
index 7c35c35..7e40c5c 100644
--- a/board/freescale/mpc8541cds/mpc8541cds.c
+++ b/board/freescale/mpc8541cds/mpc8541cds.c
@@ -302,8 +302,8 @@ local_bus_init(void)
* Errata LBC11.
* Fix Local Bus clock glitch when DLL is enabled.
*
- * If localbus freq is < 66Mhz, DLL bypass mode must be used.
- * If localbus freq is > 133Mhz, DLL can be safely enabled.
+ * If localbus freq is < 66MHz, DLL bypass mode must be used.
+ * If localbus freq is > 133MHz, DLL can be safely enabled.
* Between 66 and 133, the DLL is enabled with an override workaround.
*/
diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c
index 4cd25b6..33685c1 100644
--- a/board/freescale/mpc8555cds/mpc8555cds.c
+++ b/board/freescale/mpc8555cds/mpc8555cds.c
@@ -302,8 +302,8 @@ local_bus_init(void)
* Errata LBC11.
* Fix Local Bus clock glitch when DLL is enabled.
*
- * If localbus freq is < 66Mhz, DLL bypass mode must be used.
- * If localbus freq is > 133Mhz, DLL can be safely enabled.
+ * If localbus freq is < 66MHz, DLL bypass mode must be used.
+ * If localbus freq is > 133MHz, DLL can be safely enabled.
* Between 66 and 133, the DLL is enabled with an override workaround.
*/
diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c
index 4fe1d85..3730818 100644
--- a/board/freescale/mpc8560ads/mpc8560ads.c
+++ b/board/freescale/mpc8560ads/mpc8560ads.c
@@ -331,8 +331,8 @@ local_bus_init(void)
* Errata LBC11.
* Fix Local Bus clock glitch when DLL is enabled.
*
- * If localbus freq is < 66Mhz, DLL bypass mode must be used.
- * If localbus freq is > 133Mhz, DLL can be safely enabled.
+ * If localbus freq is < 66MHz, DLL bypass mode must be used.
+ * If localbus freq is > 133MHz, DLL can be safely enabled.
* Between 66 and 133, the DLL is enabled with an override workaround.
*/
diff --git a/board/gen860t/beeper.c b/board/gen860t/beeper.c
index b472b91..c6be83f 100644
--- a/board/gen860t/beeper.c
+++ b/board/gen860t/beeper.c
@@ -36,7 +36,7 @@
/*
* Initialize beeper-related hardware. Initialize timer 1 for use with
- * the beeper. Use 66 Mhz internal clock with prescale of 33 to get
+ * the beeper. Use 66 MHz internal clock with prescale of 33 to get
* 1 uS period per count.
* FIXME: we should really compute the prescale based on the reported
* core clock frequency.
diff --git a/board/idmr/idmr.c b/board/idmr/idmr.c
index 3771c19..6829913 100644
--- a/board/idmr/idmr.c
+++ b/board/idmr/idmr.c
@@ -78,7 +78,7 @@ phys_size_t initdram (int board_type) {
MCF_GPIO_SDRAM_SDCS_01);
/*
- * Wait 100us. We run the bus at 50Mhz, one cycle is 20ns. So 5
+ * Wait 100us. We run the bus at 50MHz, one cycle is 20ns. So 5
* iterations will do, but we do 10 just to be safe.
*/
for (i = 0; i < 10; ++i)
diff --git a/board/motionpro/motionpro.c b/board/motionpro/motionpro.c
index 842bce6..b369219 100644
--- a/board/motionpro/motionpro.c
+++ b/board/motionpro/motionpro.c
@@ -5,7 +5,7 @@
* modified for Promess PRO - by Andy Joseph, andy@promessdev.com
* modified for Promess PRO-Motion - by Robert McCullough, rob@promessdev.com
* modified by Chris M. Tumas 6/20/06 Change CAS latency to 2 from 3
- * Also changed the refresh for 100Mhz operation
+ * Also changed the refresh for 100MHz operation
*
* See file CREDITS for list of people who contributed to this
* project.
diff --git a/board/mpc8540eval/mpc8540eval.c b/board/mpc8540eval/mpc8540eval.c
index 9b564b8..fa0a336 100644
--- a/board/mpc8540eval/mpc8540eval.c
+++ b/board/mpc8540eval/mpc8540eval.c
@@ -100,7 +100,7 @@ phys_size_t initdram (int board_type)
#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus is not emulating flash */
get_sys_info(&sysinfo);
- /* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */
+ /* if localbus freq is less than 66MHz,we use bypass mode,otherwise use DLL */
if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f) < 66000000) {
lbc->lcrr = (CONFIG_SYS_LBC_LCRR & 0x0fffffff)| 0x80000000;
} else {
diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c
index 3be0104..8724e27 100644
--- a/board/mpl/pip405/pip405.c
+++ b/board/mpl/pip405/pip405.c
@@ -252,7 +252,7 @@ int board_early_init_f (void)
(datain[2] != 0x04) || /* if not SDRAM */
(!((datain[6] == 0x40) || (datain[6] == 0x48))) || /* or not (64 Bit or 72 Bit) */
(datain[7] != 0x00) || (datain[8] != 0x01) || /* or not LVTTL signal levels */
- (datain[126] == 0x66)) /* or a 66Mhz modules */
+ (datain[126] == 0x66)) /* or a 66MHz modules */
SDRAM_err ("unsupported SDRAM");
#ifdef SDRAM_DEBUG
serial_puts ("SDRAM sanity ok\n");
diff --git a/board/pm854/pm854.c b/board/pm854/pm854.c
index db855df..fed0ed4 100644
--- a/board/pm854/pm854.c
+++ b/board/pm854/pm854.c
@@ -144,8 +144,8 @@ local_bus_init(void)
* Errata LBC11.
* Fix Local Bus clock glitch when DLL is enabled.
*
- * If localbus freq is < 66Mhz, DLL bypass mode must be used.
- * If localbus freq is > 133Mhz, DLL can be safely enabled.
+ * If localbus freq is < 66MHz, DLL bypass mode must be used.
+ * If localbus freq is > 133MHz, DLL can be safely enabled.
* Between 66 and 133, the DLL is enabled with an override workaround.
*/
diff --git a/board/pm856/pm856.c b/board/pm856/pm856.c
index 50c4281..932f112 100644
--- a/board/pm856/pm856.c
+++ b/board/pm856/pm856.c
@@ -300,8 +300,8 @@ local_bus_init(void)
* Errata LBC11.
* Fix Local Bus clock glitch when DLL is enabled.
*
- * If localbus freq is < 66Mhz, DLL bypass mode must be used.
- * If localbus freq is > 133Mhz, DLL can be safely enabled.
+ * If localbus freq is < 66MHz, DLL bypass mode must be used.
+ * If localbus freq is > 133MHz, DLL can be safely enabled.
* Between 66 and 133, the DLL is enabled with an override workaround.
*/
diff --git a/board/prodrive/p3mx/pci.c b/board/prodrive/p3mx/pci.c
index 85f7caa..e36b676 100644
--- a/board/prodrive/p3mx/pci.c
+++ b/board/prodrive/p3mx/pci.c
@@ -66,13 +66,13 @@ static void gt_pci_bus_mode_display (PCI_HOST host)
printf ("PCI %d bus mode: Conventional PCI\n", host);
break;
case 1:
- printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
+ printf ("PCI %d bus mode: 66 MHz PCIX\n", host);
break;
case 2:
- printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
+ printf ("PCI %d bus mode: 100 MHz PCIX\n", host);
break;
case 3:
- printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
+ printf ("PCI %d bus mode: 133 MHz PCIX\n", host);
break;
default:
printf ("Unknown BUS %d\n", mode);
diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c
index f01f87e..3d4008b 100644
--- a/board/sbc8560/sbc8560.c
+++ b/board/sbc8560/sbc8560.c
@@ -297,7 +297,7 @@ phys_size_t initdram (int board_type)
#if 0
#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus SDRAM is not emulating flash */
get_sys_info(&sysinfo);
- /* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */
+ /* if localbus freq is less than 66MHz,we use bypass mode,otherwise use DLL */
if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f) < 66000000) {
lbc->lcrr = (CONFIG_SYS_LBC_LCRR & 0x0fffffff)| 0x80000000;
} else {
diff --git a/board/siemens/IAD210/IAD210.c b/board/siemens/IAD210/IAD210.c
index e9e7f84..e21bb24 100644
--- a/board/siemens/IAD210/IAD210.c
+++ b/board/siemens/IAD210/IAD210.c
@@ -240,7 +240,7 @@ int board_early_init_f (void)
iop->iop_padir = 0x0800;
/* start timer 2 for the 4hz LED blink rate */
- timers->cpmt_tmr2 = 0xff2c; /* 4hz for 64mhz */
+ timers->cpmt_tmr2 = 0xff2c; /* 4HZ for 64MHz */
timers->cpmt_trr2 = 0x000003d0; /* clk/16 , prescale=256 */
timers->cpmt_tgcr = 0x00000810; /* run timer 2 */
diff --git a/board/siemens/IAD210/atm.c b/board/siemens/IAD210/atm.c
index d1b75bc..e599c10 100644
--- a/board/siemens/IAD210/atm.c
+++ b/board/siemens/IAD210/atm.c
@@ -579,7 +579,7 @@ void atmUtpInit()
/* 11 = divide by 7 */
/* */
/* Note that the UTOPIA clock must be programmed as to operate */
- /* within the range SYSCLK/10 .. 50Mhz. */
+ /* within the range SYSCLK/10 .. 50MHz. */
/*-----------------------------------------------------------------*/
car->car_sccr &= 0xFFFFFFE0;
car->car_sccr |= 0x00000008; /* UTPCLK = SYSCLK / 4 */
diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c
index f69de95..1f309bb 100644
--- a/board/tqc/tqm85xx/tqm85xx.c
+++ b/board/tqc/tqm85xx/tqm85xx.c
@@ -458,8 +458,8 @@ void local_bus_init (void)
* Errata LBC11.
* Fix Local Bus clock glitch when DLL is enabled.
*
- * If localbus freq is < 66Mhz, DLL bypass mode must be used.
- * If localbus freq is > 133Mhz, DLL can be safely enabled.
+ * If localbus freq is < 66MHz, DLL bypass mode must be used.
+ * If localbus freq is > 133MHz, DLL can be safely enabled.
* Between 66 and 133, the DLL is enabled with an override workaround.
*/