summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/st/nhk8815/Makefile2
-rw-r--r--board/st/nhk8815/platform.S340
2 files changed, 1 insertions, 341 deletions
diff --git a/board/st/nhk8815/Makefile b/board/st/nhk8815/Makefile
index 3f360dc..60b87b1 100644
--- a/board/st/nhk8815/Makefile
+++ b/board/st/nhk8815/Makefile
@@ -30,7 +30,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
COBJS := nhk8815.o
-SOBJS := platform.o
+SOBJS :=
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/st/nhk8815/platform.S b/board/st/nhk8815/platform.S
deleted file mode 100644
index 2a67110..0000000
--- a/board/st/nhk8815/platform.S
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2005
- * STMicrolelctronics, <www.st.com>
- *
- * (C) Copyright 2004, ARM Ltd.
- * Philippe Robin, <philippe.robin@arm.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-.globl lowlevel_init
-lowlevel_init:
- /* Jump to the flash address */
- ldr r0, =CFG_ONENAND_BASE
-
- /*
- * Make it independent whether we boot from 0x0 or 0x30000000.
- * Non-portable: it relies on the knowledge that ip has to be updated
- */
- orr ip, ip, r0 /* adjust return address of cpu_init_crit */
- orr lr, lr, r0 /* adjust return address */
- orr pc, pc, r0 /* jump to the normal address */
- nop
-
- /* Initialize PLL, Remap clear, FSMC, MPMC here! */
- /* What about GPIO, CLCD and UART */
-
- /* PLL Initialization */
- /* Prog the PLL1 @ 266 MHz ==> SDRAM Clock = 100.8 MHz */
- ldr r0, =NOMADIK_SRC_BASE
-
- ldr r1, =0x2B013502
-
- str r1, [r0, #0x14]
-
- /* Used to set all the timers clock to 2.4MHZ */
- ldr r1, =0x2AAAA004
- str r1, [r0]
-
- ldr r1, =0x10000000
- str r1, [r0, #0x10]
-
- /* FSMC setup ---- */
- ldr r0, =NOMADIK_FSMC_BASE
-
- ldr r1, =0x10DB /* For 16-bit NOR flash */
- str r1, [r0, #0x08]
-
- ldr r1, =0x03333333 /* For 16-bit NOR flash */
- str r1, [r0, #0xc]
-
- /* oneNAND setting */
- ldr r1, =0x0000105B /* BCR0 Prog control register */
- str r1, [r0]
-
- ldr r1, =0x0A200551 /* BTR0 Prog timing register */
- str r1, [r0, #0x04]
-
- /* preload the instructions into icache */
- add r0, pc, #0x1F
- bic r0, r0, #0x1F
- mcr p15, 0, r0, c7, c13, 1
- add r0, r0, #0x20
- mcr p15, 0, r0, c7, c13, 1
-
- /* Now Clear Remap */
- ldr r0, =NOMADIK_SRC_BASE
-
- ldr r1, =0x2004
- str r1, [r0]
-
- ldr r1, =0x10000000
- str r1, [r0, #0x10]
-
- ldr r0, =0x101E9000
- ldr r1, =0x2004
- str r1, [r0]
-
- ldr r0, =NOMADIK_SRC_BASE
- ldr r1, =0x2104
- str r1, [r0]
-
- /* FSMC setup -- */
- mov r0, #(NOMADIK_FSMC_BASE & 0x10000000)
- orr r0, r0, #(NOMADIK_FSMC_BASE & 0x0FFFFFFF)
-
- ldr r1, =0x10DB /* For 16-bit NOR flash */
- str r1, [r0, #0x8]
-
- ldr r1, =0x03333333 /* For 16-bit NOR flash */
- str r1, [r0, #0xc]
-
- /* MPMC Setup */
- ldr r0, =NOMADIK_MPMC_BASE
-
- ldr r1, =0xF00003
- str r1, [r0] /* Enable the MPMC and the DLL */
-
- ldr r1, =0x183
- str r1, [r0, #0x20]
-
- ldr r2, =NOMADIK_PMU_BASE
-
- ldr r1, =0x1111
- str r1, [r2]
-
- ldr r1, =0x1111 /* Prog the, mand delay strategy */
- str r1, [r0, #0x28]
-
- ldr r1, =0x103 /* NOP ,mand */
- str r1, [r0, #0x20]
-
- /* FIXME -- Wait required here */
-
- ldr r1, =0x103 /* PALL ,mand*/
- str r1, [r0, #0x20]
-
- ldr r1, =0x1
- str r1, [r0, #0x24] /* To do at least two auto-refresh */
-
- /* FIXME -- Wait required here */
-
- /* Auto-refresh period = 7.8us @ SDRAM Clock = 100.8 MHz */
- ldr r1, =0x31
- str r1, [r0, #0x24]
-
- /* Prog Little Endian, Not defined in 8800 board */
- ldr r1, =0x0
- str r1, [r0, #0x8]
-
-
- ldr r1, =0x2
- str r1, [r0, #0x30] /* Prog tRP timing */
-
- ldr r1, =0x4 /* Change for 8815 */
- str r1, [r0, #0x34] /* Prog tRAS timing */
-
- ldr r1, =0xB
- str r1, [r0, #0x38] /* Prog tSREX timing */
-
-
- ldr r1, =0x1
- str r1, [r0, #0x44] /* Prog tWR timing */
-
- ldr r1, =0x8
- str r1, [r0, #0x48] /* Prog tRC timing */
-
- ldr r1, =0xA
- str r1, [r0, #0x4C] /* Prog tRFC timing */
-
- ldr r1, =0xB
- str r1, [r0, #0x50] /* Prog tXSR timing */
-
- ldr r1, =0x1
- str r1, [r0, #0x54] /* Prog tRRD timing */
-
- ldr r1, =0x1
- str r1, [r0, #0x58] /* Prog tMRD timing */
-
- ldr r1, =0x1
- str r1, [r0, #0x5C] /* Prog tCDLR timing */
-
- /* DDR-SDRAM MEMORY IS ON BANK0 8815 */
- ldr r1, =0x304 /* Prog RAS and CAS for CS 0 */
- str r1, [r0, #0x104]
-
- /* SDR-SDRAM MEMORY IS ON BANK1 8815 */
- ldr r1, =0x304 /* Prog RAS and CAS for CS 1 */
- str r1, [r0, #0x124]
- /* THE DATA BUS WIDE IS PROGRAM FOR 16-BITS */
- /* DDR-SDRAM MEMORY IS ON BANK0*/
-
- ldr r1, =0x884 /* 8815 : config reg in BRC for CS0 */
- str r1, [r0, #0x100]
-
- /*SDR-SDRAM MEMORY IS ON BANK1*/
-
- ldr r1, =0x884 /* 8815 : config reg in BRC for CS1 */
- str r1, [r0, #0x120]
-
- ldr r1, =0x83 /*MODE Mand*/
- str r1, [r0, #0x20]
-
- /* LOAD MODE REGISTER FOR 2 bursts of 16b, with DDR mem ON BANK0 */
-
- ldr r1, =0x62000 /*Data in*/
- ldr r1, [r1]
-
- /* LOAD MODE REGISTER FOR 2 bursts of 16b, with DDR mem ON BANK1 */
-
- ldr r1, =0x8062000
- ldr r1, [r1]
-
- ldr r1, =0x003
- str r1, [r0, #0x20]
-
- /* ENABLE ALL THE BUFFER FOR EACH AHB PORT*/
-
- ldr r1, =0x01 /* Enable buffer 0 */
- str r1, [r0, #0x400]
-
- ldr r1, =0x01 /* Enable buffer 1 */
- str r1, [r0, #0x420]
-
- ldr r1, =0x01 /* Enable buffer 2 */
- str r1, [r0, #0x440]
-
- ldr r1, =0x01 /* Enable buffer 3 */
- str r1, [r0, #0x460]
-
- ldr r1, =0x01 /* Enable buffer 4 */
- str r1, [r0, #0x480]
-
- ldr r1, =0x01 /* Enable buffer 5 */
- str r1, [r0, #0x4A0]
-
- /* GPIO settings */
-
- ldr r0, =NOMADIK_GPIO1_BASE
-
- ldr r1, =0xC0600000
- str r1, [r0, #0x20]
-
- ldr r1, =0x3F9FFFFF /* ABHI change this for uart1 */
- str r1, [r0, #0x24]
-
- ldr r1, =0x3F9FFFFF /* ABHI change this for uart1 */
- str r1, [r0, #0x28]
-
- ldr r0, =NOMADIK_GPIO0_BASE
-
- ldr r1, =0xFFFFFFFF
- str r1, [r0, #0x20]
-
- ldr r1, =0x00
- str r1, [r0, #0x24]
-
- ldr r1, =0x00
- str r1, [r0, #0x28]
-
- /* Configure CPLD_CTRL register for enabling MUX logic for UART0/UART2 */
-
- ldr r0, =NOMADIK_FSMC_BASE
-
- ldr r1, =0x10DB /* INIT FSMC bank 0 */
- str r1, [r0, #0x00]
-
- ldr r1, =0x0FFFFFFF
- str r1, [r0, #0x04]
-
- ldr r1, =0x010DB /* INIT FSMC bank 1 */
- str r1, [r0, #0x08]
-
- ldr r1, =0x00FFFFFFF
- str r1, [r0, #0x0C]
-
- ldr r0, =NOMADIK_UART0_BASE
-
- ldr r1, =0x00000000
- str r1, [r0, #0x30]
-
- ldr r1, =0x0000004e
- str r1, [r0, #0x24]
-
- ldr r1, =0x00000008
- str r1, [r0, #0x28]
-
- ldr r1, =0x00000060
- str r1, [r0, #0x2C]
-
- ldr r1, =0x00000301
- str r1, [r0, #0x30]
-
- ldr r1, =0x00000066
- str r1, [r0]
-
- ldr r0, =NOMADIK_UART1_BASE
-
- ldr r1, =0x00000000
- str r1, [r0, #0x30]
-
- ldr r1, =0x0000004e
- str r1, [r0, #0x24]
-
- ldr r1, =0x00000008
- str r1, [r0, #0x28]
-
- ldr r1, =0x00000060
- str r1, [r0, #0x2C]
-
- ldr r1, =0x00000301
- str r1, [r0, #0x30]
-
- ldr r1, =0x00000066
- str r1, [r0]
-
- ldr r0, =NOMADIK_UART2_BASE
-
- ldr r1, =0x00000000
- str r1, [r0, #0x30]
-
- ldr r1, =0x0000004e
- str r1, [r0, #0x24]
-
- ldr r1, =0x00000008
- str r1, [r0, #0x28]
-
- ldr r1, =0x00000060
- str r1, [r0, #0x2C]
-
- ldr r1, =0x00000301
- str r1, [r0, #0x30]
-
- ldr r1, =0x00000066
- str r1, [r0]
-
- /* Configure CPLD to enable UART0 */
-
- mov pc, lr