summaryrefslogtreecommitdiff
path: root/common/cmd_ide.c
diff options
context:
space:
mode:
Diffstat (limited to 'common/cmd_ide.c')
-rw-r--r--common/cmd_ide.c174
1 files changed, 119 insertions, 55 deletions
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index 9cbfe1b..e514cf7 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -44,6 +44,9 @@
#ifdef CONFIG_STATUS_LED
# include <status_led.h>
#endif
+#ifdef __I386__
+#include <asm/io.h>
+#endif
#ifdef CONFIG_SHOW_BOOT_PROGRESS
# include <status_led.h>
@@ -114,7 +117,9 @@ ulong ide_bus_offset[CFG_IDE_MAXBUS] = {
#endif
};
+#ifdef __PPC__
#define ATA_CURR_BASE(dev) (CFG_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)])
+#endif
static int ide_bus_ok[CFG_IDE_MAXBUS];
@@ -142,9 +147,11 @@ static uchar ide_wait (int dev, ulong t);
#define IDE_SPIN_UP_TIME_OUT 5000 /* 5 sec spin-up timeout */
-static void __inline__ outb(int dev, int port, unsigned char val);
-static unsigned char __inline__ inb(int dev, int port);
+static void __inline__ ide_outb(int dev, int port, unsigned char val);
+static unsigned char __inline__ ide_inb(int dev, int port);
+#ifdef __PPC__
static void input_swap_data(int dev, ulong *sect_buf, int words);
+#endif
static void input_data(int dev, ulong *sect_buf, int words);
static void output_data(int dev, ulong *sect_buf, int words);
static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len);
@@ -517,14 +524,14 @@ void ide_init (void)
/* Select device
*/
udelay (100000); /* 100 ms */
- outb (dev, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(dev));
+ ide_outb (dev, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(dev));
udelay (100000); /* 100 ms */
i = 0;
do {
udelay (10000); /* 10 ms */
- c = inb (dev, ATA_STATUS);
+ c = ide_inb (dev, ATA_STATUS);
i++;
if (i > (ATA_RESET_TIME * 100)) {
puts ("** Timeout **\n");
@@ -679,30 +686,48 @@ set_pcmcia_timing (int pmode)
/* ------------------------------------------------------------------------- */
+#ifdef __PPC__
static void __inline__
-outb(int dev, int port, unsigned char val)
+ide_outb(int dev, int port, unsigned char val)
{
/* Ensure I/O operations complete */
__asm__ volatile("eieio");
*((uchar *)(ATA_CURR_BASE(dev)+port)) = val;
#if 0
- printf ("OUTB: 0x%08lx <== 0x%02x\n", ATA_CURR_BASE(dev)+port, val);
+ printf ("ide_outb: 0x%08lx <== 0x%02x\n", ATA_CURR_BASE(dev)+port, val);
#endif
}
+#else /* ! __PPC__ */
+static void __inline__
+ide_outb(int dev, int port, unsigned char val)
+{
+ outb(val, port);
+}
+#endif /* __PPC__ */
+
+#ifdef __PPC__
static unsigned char __inline__
-inb(int dev, int port)
+ide_inb(int dev, int port)
{
uchar val;
/* Ensure I/O operations complete */
__asm__ volatile("eieio");
val = *((uchar *)(ATA_CURR_BASE(dev)+port));
#if 0
- printf ("INB: 0x%08lx ==> 0x%02x\n", ATA_CURR_BASE(dev)+port, val);
+ printf ("ide_inb: 0x%08lx ==> 0x%02x\n", ATA_CURR_BASE(dev)+port, val);
#endif
return (val);
}
+#else /* ! __PPC__ */
+static unsigned char __inline__
+ide_inb(int dev, int port)
+{
+ return inb(port);
+}
+#endif /* __PPC__ */
+#ifdef __PPC__
__inline__ unsigned ld_le16(const volatile unsigned short *addr)
{
unsigned val;
@@ -722,7 +747,14 @@ input_swap_data(int dev, ulong *sect_buf, int words)
*dbuf++ = ld_le16(pbuf);
}
}
+#else /* ! __PPC__ */
+#define input_swap_data(x,y,z) input_data(x,y,z)
+#endif /* __PPC__ */
+
+
+
+#ifdef __PPC__
static void
output_data(int dev, ulong *sect_buf, int words)
{
@@ -738,7 +770,15 @@ output_data(int dev, ulong *sect_buf, int words)
*pbuf = *dbuf++;
}
}
+#else /* ! __PPC__ */
+static void
+output_data(int dev, ulong *sect_buf, int words)
+{
+ outsw(ATA_DATA_REG, sect_buf, words<<1);
+}
+#endif /* __PPC__ */
+#ifdef __PPC__
static void
input_data(int dev, ulong *sect_buf, int words)
{
@@ -754,6 +794,14 @@ input_data(int dev, ulong *sect_buf, int words)
*dbuf++ = *pbuf;
}
}
+#else /* ! __PPC__ */
+static void
+input_data(int dev, ulong *sect_buf, int words)
+{
+ insw(ATA_DATA_REG, sect_buf, words << 1);
+}
+
+#endif /* __PPC__ */
/* -------------------------------------------------------------------------
*/
@@ -773,19 +821,19 @@ static void ide_ident (block_dev_desc_t *dev_desc)
ide_led (DEVICE_LED(device), 1); /* LED on */
/* Select device
*/
- outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
+ ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
dev_desc->if_type=IF_TYPE_IDE;
#ifdef CONFIG_ATAPI
/* check signature */
- if ((inb(device,ATA_SECT_CNT)==0x01) &&
- (inb(device,ATA_SECT_NUM)==0x01) &&
- (inb(device,ATA_CYL_LOW)==0x14) &&
- (inb(device,ATA_CYL_HIGH)==0xEB)) {
+ if ((ide_inb(device,ATA_SECT_CNT) == 0x01) &&
+ (ide_inb(device,ATA_SECT_NUM) == 0x01) &&
+ (ide_inb(device,ATA_CYL_LOW) == 0x14) &&
+ (ide_inb(device,ATA_CYL_HIGH) == 0xEB)) {
/* ATAPI Signature found */
dev_desc->if_type=IF_TYPE_ATAPI;
/* Start Ident Command
*/
- outb (device, ATA_COMMAND, ATAPI_CMD_IDENT);
+ ide_outb (device, ATA_COMMAND, ATAPI_CMD_IDENT);
/*
* Wait for completion - ATAPI devices need more time
* to become ready
@@ -797,7 +845,7 @@ static void ide_ident (block_dev_desc_t *dev_desc)
{
/* Start Ident Command
*/
- outb (device, ATA_COMMAND, ATA_CMD_IDENT);
+ ide_outb (device, ATA_COMMAND, ATA_CMD_IDENT);
/* Wait for completion
*/
@@ -867,15 +915,15 @@ static void ide_ident (block_dev_desc_t *dev_desc)
#if 0 /* only used to test the powersaving mode,
* if enabled, the drive goes after 5 sec
* in standby mode */
- outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
+ ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
c = ide_wait (device, IDE_TIME_OUT);
- outb (device, ATA_SECT_CNT, 1);
- outb (device, ATA_LBA_LOW, 0);
- outb (device, ATA_LBA_MID, 0);
- outb (device, ATA_LBA_HIGH, 0);
- outb (device, ATA_DEV_HD, ATA_LBA |
+ ide_outb (device, ATA_SECT_CNT, 1);
+ ide_outb (device, ATA_LBA_LOW, 0);
+ ide_outb (device, ATA_LBA_MID, 0);
+ ide_outb (device, ATA_LBA_HIGH, 0);
+ ide_outb (device, ATA_DEV_HD, ATA_LBA |
ATA_DEVICE(device));
- outb (device, ATA_COMMAND, 0xe3);
+ ide_outb (device, ATA_COMMAND, 0xe3);
udelay (50);
c = ide_wait (device, IDE_TIME_OUT); /* can't take over 500 ms */
#endif
@@ -897,7 +945,7 @@ ulong ide_read (int device, ulong blknr, ulong blkcnt, ulong *buffer)
/* Select device
*/
- outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
+ ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
c = ide_wait (device, IDE_TIME_OUT);
if (c & ATA_STAT_BUSY) {
@@ -907,7 +955,7 @@ ulong ide_read (int device, ulong blknr, ulong blkcnt, ulong *buffer)
/* first check if the drive is in Powersaving mode, if yes,
* increase the timeout value */
- outb (device, ATA_COMMAND, ATA_CMD_CHK_PWR);
+ ide_outb (device, ATA_COMMAND, ATA_CMD_CHK_PWR);
udelay (50);
c = ide_wait (device, IDE_TIME_OUT); /* can't take over 500 ms */
@@ -919,7 +967,7 @@ ulong ide_read (int device, ulong blknr, ulong blkcnt, ulong *buffer)
if ((c & ATA_STAT_ERR) == ATA_STAT_ERR) {
printf ("No Powersaving mode %X\n", c);
} else {
- c = inb(device,ATA_SECT_CNT);
+ c = ide_inb(device,ATA_SECT_CNT);
PRINTF("Powersaving %02X\n",c);
if(c==0)
pwrsave=1;
@@ -935,14 +983,14 @@ ulong ide_read (int device, ulong blknr, ulong blkcnt, ulong *buffer)
break;
}
- outb (device, ATA_SECT_CNT, 1);
- outb (device, ATA_LBA_LOW, (blknr >> 0) & 0xFF);
- outb (device, ATA_LBA_MID, (blknr >> 8) & 0xFF);
- outb (device, ATA_LBA_HIGH, (blknr >> 16) & 0xFF);
- outb (device, ATA_DEV_HD, ATA_LBA |
+ ide_outb (device, ATA_SECT_CNT, 1);
+ ide_outb (device, ATA_LBA_LOW, (blknr >> 0) & 0xFF);
+ ide_outb (device, ATA_LBA_MID, (blknr >> 8) & 0xFF);
+ ide_outb (device, ATA_LBA_HIGH, (blknr >> 16) & 0xFF);
+ ide_outb (device, ATA_DEV_HD, ATA_LBA |
ATA_DEVICE(device) |
((blknr >> 24) & 0xF) );
- outb (device, ATA_COMMAND, ATA_CMD_READ);
+ ide_outb (device, ATA_COMMAND, ATA_CMD_READ);
udelay (50);
@@ -960,7 +1008,7 @@ ulong ide_read (int device, ulong blknr, ulong blkcnt, ulong *buffer)
}
input_data (device, buffer, ATA_SECTORWORDS);
- (void) inb (device, ATA_STATUS); /* clear IRQ */
+ (void) ide_inb (device, ATA_STATUS); /* clear IRQ */
++n;
++blknr;
@@ -983,7 +1031,7 @@ ulong ide_write (int device, ulong blknr, ulong blkcnt, ulong *buffer)
/* Select device
*/
- outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
+ ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
while (blkcnt-- > 0) {
@@ -994,14 +1042,14 @@ ulong ide_write (int device, ulong blknr, ulong blkcnt, ulong *buffer)
goto WR_OUT;
}
- outb (device, ATA_SECT_CNT, 1);
- outb (device, ATA_LBA_LOW, (blknr >> 0) & 0xFF);
- outb (device, ATA_LBA_MID, (blknr >> 8) & 0xFF);
- outb (device, ATA_LBA_HIGH, (blknr >> 16) & 0xFF);
- outb (device, ATA_DEV_HD, ATA_LBA |
+ ide_outb (device, ATA_SECT_CNT, 1);
+ ide_outb (device, ATA_LBA_LOW, (blknr >> 0) & 0xFF);
+ ide_outb (device, ATA_LBA_MID, (blknr >> 8) & 0xFF);
+ ide_outb (device, ATA_LBA_HIGH, (blknr >> 16) & 0xFF);
+ ide_outb (device, ATA_DEV_HD, ATA_LBA |
ATA_DEVICE(device) |
((blknr >> 24) & 0xF) );
- outb (device, ATA_COMMAND, ATA_CMD_WRITE);
+ ide_outb (device, ATA_COMMAND, ATA_CMD_WRITE);
udelay (50);
@@ -1014,7 +1062,7 @@ ulong ide_write (int device, ulong blknr, ulong blkcnt, ulong *buffer)
}
output_data (device, buffer, ATA_SECTORWORDS);
- c = inb (device, ATA_STATUS); /* clear IRQ */
+ c = ide_inb (device, ATA_STATUS); /* clear IRQ */
++n;
++blknr;
buffer += ATA_SECTORWORDS;
@@ -1063,7 +1111,7 @@ static uchar ide_wait (int dev, ulong t)
ulong delay = 10 * t; /* poll every 100 us */
uchar c;
- while ((c = inb(dev, ATA_STATUS)) & ATA_STAT_BUSY) {
+ while ((c = ide_inb(dev, ATA_STATUS)) & ATA_STAT_BUSY) {
udelay (100);
if (delay-- == 0) {
break;
@@ -1188,6 +1236,7 @@ static void ide_led (uchar led, uchar status)
#define AT_PRINTF(fmt,args...)
#endif
+#ifdef __PPC__
/* since ATAPI may use commands with not 4 bytes alligned length
* we have our own transfer functions, 2 bytes alligned */
static void
@@ -1218,6 +1267,22 @@ input_data_shorts(int dev, ushort *sect_buf, int shorts)
}
}
+#else /* ! __PPC__ */
+static void
+output_data_shorts(int dev, ushort *sect_buf, int shorts)
+{
+ outsw(ATA_DATA_REG, sect_buf, shorts);
+}
+
+
+static void
+input_data_shorts(int dev, ushort *sect_buf, int shorts)
+{
+ insw(ATA_DATA_REG, sect_buf, shorts);
+}
+
+#endif /* __PPC__ */
+
/*
* Wait until (Status & mask) == res, or timeout (in ms)
* Return last status
@@ -1229,9 +1294,8 @@ static uchar atapi_wait_mask (int dev, ulong t,uchar mask, uchar res)
ulong delay = 10 * t; /* poll every 100 us */
uchar c;
- c = inb(dev,ATA_DEV_CTL); /* prevents to read the status before valid */
- while (((c = inb(dev, ATA_STATUS)) & mask)
- != res) {
+ c = ide_inb(dev,ATA_DEV_CTL); /* prevents to read the status before valid */
+ while (((c = ide_inb(dev, ATA_STATUS)) & mask) != res) {
/* break if error occurs (doesn't make sense to wait more) */
if((c & ATA_STAT_ERR)==ATA_STAT_ERR)
break;
@@ -1256,7 +1320,7 @@ unsigned char atapi_issue(int device,unsigned char* ccb,int ccblen, unsigned cha
*/
mask = ATA_STAT_BUSY|ATA_STAT_DRQ;
res = 0;
- outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
+ ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
c = atapi_wait_mask(device,ATAPI_TIME_OUT,mask,res);
if ((c & mask) != res) {
printf ("ATAPI_ISSUE: device %d not ready status %X\n", device,c);
@@ -1264,12 +1328,12 @@ unsigned char atapi_issue(int device,unsigned char* ccb,int ccblen, unsigned cha
goto AI_OUT;
}
/* write taskfile */
- outb (device, ATA_ERROR_REG, 0); /* no DMA, no overlaped */
- outb (device, ATA_CYL_LOW, (unsigned char)(buflen & 0xFF));
- outb (device, ATA_CYL_HIGH, (unsigned char)((buflen<<8) & 0xFF));
- outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
+ ide_outb (device, ATA_ERROR_REG, 0); /* no DMA, no overlaped */
+ ide_outb (device, ATA_CYL_LOW, (unsigned char)(buflen & 0xFF));
+ ide_outb (device, ATA_CYL_HIGH, (unsigned char)((buflen<<8) & 0xFF));
+ ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
- outb (device, ATA_COMMAND, ATAPI_CMD_PACKET);
+ ide_outb (device, ATA_COMMAND, ATAPI_CMD_PACKET);
udelay (50);
mask = ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR;
@@ -1295,7 +1359,7 @@ unsigned char atapi_issue(int device,unsigned char* ccb,int ccblen, unsigned cha
c = atapi_wait_mask(device,ATAPI_TIME_OUT,mask,res);
if ((c & mask) != res ) {
if (c & ATA_STAT_ERR) {
- err=(inb(device,ATA_ERROR_REG))>>4;
+ err=(ide_inb(device,ATA_ERROR_REG))>>4;
AT_PRINTF("atapi_issue 1 returned sense key %X status %02X\n",err,c);
} else {
printf ("ATTAPI_ISSUE: (no DRQ) after sending ccb (%x) status 0x%02x\n", ccb[0],c);
@@ -1303,9 +1367,9 @@ unsigned char atapi_issue(int device,unsigned char* ccb,int ccblen, unsigned cha
}
goto AI_OUT;
}
- n=inb(device, ATA_CYL_HIGH);
+ n=ide_inb(device, ATA_CYL_HIGH);
n<<=8;
- n+=inb(device, ATA_CYL_LOW);
+ n+=ide_inb(device, ATA_CYL_LOW);
if(n>buflen) {
printf("ERROR, transfer bytes %d requested only %d\n",n,buflen);
err=0xff;
@@ -1324,7 +1388,7 @@ unsigned char atapi_issue(int device,unsigned char* ccb,int ccblen, unsigned cha
/* we transfer shorts */
n>>=1;
/* ok now decide if it is an in or output */
- if ((inb(device, ATA_SECT_CNT)&0x02)==0) {
+ if ((ide_inb(device, ATA_SECT_CNT)&0x02)==0) {
AT_PRINTF("Write to device\n");
output_data_shorts(device,(unsigned short *)buffer,n);
} else {
@@ -1337,7 +1401,7 @@ unsigned char atapi_issue(int device,unsigned char* ccb,int ccblen, unsigned cha
res=0;
c = atapi_wait_mask(device,ATAPI_TIME_OUT,mask,res);
if ((c & ATA_STAT_ERR) == ATA_STAT_ERR) {
- err=(inb(device,ATA_ERROR_REG) >> 4);
+ err=(ide_inb(device,ATA_ERROR_REG) >> 4);
AT_PRINTF("atapi_issue 2 returned sense key %X status %X\n",err,c);
} else {
err = 0;