summaryrefslogtreecommitdiff
path: root/common
diff options
context:
space:
mode:
Diffstat (limited to 'common')
-rw-r--r--common/cmd_mii.c413
1 files changed, 413 insertions, 0 deletions
diff --git a/common/cmd_mii.c b/common/cmd_mii.c
index ef53e13..4a84829 100644
--- a/common/cmd_mii.c
+++ b/common/cmd_mii.c
@@ -28,9 +28,11 @@
#include <common.h>
#include <command.h>
#include <miiphy.h>
+#include <miivals.h>
#if (CONFIG_COMMANDS & CFG_CMD_MII)
+#ifdef CONFIG_TERSE_MII
/*
* Display values from last command.
*/
@@ -143,6 +145,417 @@ U_BOOT_CMD(
"mii read <addr> <reg> - read MII PHY <addr> register <reg>\n"
"mii write <addr> <reg> <data> - write MII PHY <addr> register <reg>\n"
);
+#else /* CONFIG_TERSE_MII */
+typedef struct _MII_reg_desc_t {
+ ushort regno;
+ char * name;
+} MII_reg_desc_t;
+
+MII_reg_desc_t reg_0_5_desc_tbl[] = {
+ { 0, "PHY control register" },
+ { 1, "PHY status register" },
+ { 2, "PHY ID 1 register" },
+ { 3, "PHY ID 2 register" },
+ { 4, "Autonegotiation advertisement register" },
+ { 5, "Autonegotiation partner abilities register" },
+};
+
+typedef struct _MII_field_desc_t {
+ ushort hi;
+ ushort lo;
+ ushort mask;
+ char * name;
+} MII_field_desc_t;
+
+MII_field_desc_t reg_0_desc_tbl[] = {
+ { 15, 15, 0x01, "reset" },
+ { 14, 14, 0x01, "loopback" },
+ { 13, 6, 0x81, "speed selection" }, /* special */
+ { 12, 12, 0x01, "A/N enable" },
+ { 11, 11, 0x01, "power-down" },
+ { 10, 10, 0x01, "isolate" },
+ { 9, 9, 0x01, "restart A/N" },
+ { 8, 8, 0x01, "duplex" }, /* special */
+ { 7, 7, 0x01, "collision test enable" },
+ { 5, 0, 0x3f, "(reserved)" }
+};
+
+MII_field_desc_t reg_1_desc_tbl[] = {
+ { 15, 15, 0x01, "100BASE-T4 able" },
+ { 14, 14, 0x01, "100BASE-X full duplex able" },
+ { 13, 13, 0x01, "100BASE-X half duplex able" },
+ { 12, 12, 0x01, "10 Mbps full duplex able" },
+ { 11, 11, 0x01, "10 Mbps half duplex able" },
+ { 10, 10, 0x01, "100BASE-T2 full duplex able" },
+ { 9, 9, 0x01, "100BASE-T2 half duplex able" },
+ { 8, 8, 0x01, "extended status" },
+ { 7, 7, 0x01, "(reserved)" },
+ { 6, 6, 0x01, "MF preamble suppression" },
+ { 5, 5, 0x01, "A/N complete" },
+ { 4, 4, 0x01, "remote fault" },
+ { 3, 3, 0x01, "A/N able" },
+ { 2, 2, 0x01, "link status" },
+ { 1, 1, 0x01, "jabber detect" },
+ { 0, 0, 0x01, "extended capabilities" },
+};
+
+MII_field_desc_t reg_2_desc_tbl[] = {
+ { 15, 0, 0xffff, "OUI portion" },
+};
+
+MII_field_desc_t reg_3_desc_tbl[] = {
+ { 15, 10, 0x3f, "OUI portion" },
+ { 9, 4, 0x3f, "manufacturer part number" },
+ { 3, 0, 0x0f, "manufacturer rev. number" },
+};
+
+MII_field_desc_t reg_4_desc_tbl[] = {
+ { 15, 15, 0x01, "next page able" },
+ { 14, 14, 0x01, "reserved" },
+ { 13, 13, 0x01, "remote fault" },
+ { 12, 12, 0x01, "reserved" },
+ { 11, 11, 0x01, "asymmetric pause" },
+ { 10, 10, 0x01, "pause enable" },
+ { 9, 9, 0x01, "100BASE-T4 able" },
+ { 8, 8, 0x01, "100BASE-TX full duplex able" },
+ { 7, 7, 0x01, "100BASE-TX able" },
+ { 6, 6, 0x01, "10BASE-T full duplex able" },
+ { 5, 5, 0x01, "10BASE-T able" },
+ { 4, 0, 0x1f, "xxx to do" },
+};
+
+MII_field_desc_t reg_5_desc_tbl[] = {
+ { 15, 15, 0x01, "next page able" },
+ { 14, 14, 0x01, "acknowledge" },
+ { 13, 13, 0x01, "remote fault" },
+ { 12, 12, 0x01, "(reserved)" },
+ { 11, 11, 0x01, "asymmetric pause able" },
+ { 10, 10, 0x01, "pause able" },
+ { 9, 9, 0x01, "100BASE-T4 able" },
+ { 8, 8, 0x01, "100BASE-X full duplex able" },
+ { 7, 7, 0x01, "100BASE-TX able" },
+ { 6, 6, 0x01, "10BASE-T full duplex able" },
+ { 5, 5, 0x01, "10BASE-T able" },
+ { 4, 0, 0x1f, "xxx to do" },
+};
+
+#define DESC0LEN (sizeof(reg_0_desc_tbl)/sizeof(reg_0_desc_tbl[0]))
+#define DESC1LEN (sizeof(reg_1_desc_tbl)/sizeof(reg_1_desc_tbl[0]))
+#define DESC2LEN (sizeof(reg_2_desc_tbl)/sizeof(reg_2_desc_tbl[0]))
+#define DESC3LEN (sizeof(reg_3_desc_tbl)/sizeof(reg_3_desc_tbl[0]))
+#define DESC4LEN (sizeof(reg_4_desc_tbl)/sizeof(reg_4_desc_tbl[0]))
+#define DESC5LEN (sizeof(reg_5_desc_tbl)/sizeof(reg_5_desc_tbl[0]))
+
+typedef struct _MII_field_desc_and_len_t {
+ MII_field_desc_t * pdesc;
+ ushort len;
+} MII_field_desc_and_len_t;
+
+MII_field_desc_and_len_t desc_and_len_tbl[] = {
+ { reg_0_desc_tbl, DESC0LEN },
+ { reg_1_desc_tbl, DESC1LEN },
+ { reg_2_desc_tbl, DESC2LEN },
+ { reg_3_desc_tbl, DESC3LEN },
+ { reg_4_desc_tbl, DESC4LEN },
+ { reg_5_desc_tbl, DESC5LEN },
+};
+
+static void dump_reg(
+ ushort regval,
+ MII_reg_desc_t * prd,
+ MII_field_desc_and_len_t * pdl);
+
+static int special_field(
+ ushort regno,
+ MII_field_desc_t * pdesc,
+ ushort regval);
+
+void MII_dump_0_to_5(
+ ushort regvals[6],
+ uchar reglo,
+ uchar reghi)
+{
+ ulong i;
+
+ for (i = 0; i < 6; i++) {
+ if ((reglo <= i) && (i <= reghi))
+ dump_reg(regvals[i], &reg_0_5_desc_tbl[i],
+ &desc_and_len_tbl[i]);
+ }
+}
+
+static void dump_reg(
+ ushort regval,
+ MII_reg_desc_t * prd,
+ MII_field_desc_and_len_t * pdl)
+{
+ ulong i;
+ ushort mask_in_place;
+ MII_field_desc_t * pdesc;
+
+ printf("%u. (%04hx) -- %s --\n",
+ prd->regno, regval, prd->name);
+
+ for (i = 0; i < pdl->len; i++) {
+ pdesc = &pdl->pdesc[i];
+
+ mask_in_place = pdesc->mask << pdesc->lo;
+
+ printf(" (%04hx:%04hx) %u.",
+ mask_in_place,
+ regval & mask_in_place,
+ prd->regno);
+
+ if (special_field(prd->regno, pdesc, regval)) {
+ }
+ else {
+ if (pdesc->hi == pdesc->lo)
+ printf("%2u ", pdesc->lo);
+ else
+ printf("%2u-%2u", pdesc->hi, pdesc->lo);
+ printf(" = %5u %s",
+ (regval & mask_in_place) >> pdesc->lo,
+ pdesc->name);
+ }
+ printf("\n");
+
+ }
+ printf("\n");
+}
+
+/* Special fields:
+** 0.6,13
+** 0.8
+** 2.15-0
+** 3.15-0
+** 4.4-0
+** 5.4-0
+*/
+
+static int special_field(
+ ushort regno,
+ MII_field_desc_t * pdesc,
+ ushort regval)
+{
+ if ((regno == 0) && (pdesc->lo == 6)) {
+ ushort speed_bits = regval & MII_CTL_SPEED_MASK;
+ printf("%2u,%2u = b%u%u speed selection = %s Mbps",
+ 6, 13,
+ (regval >> 6) & 1,
+ (regval >> 13) & 1,
+ speed_bits == MII_CTL_SPEED_1000_MBPS ? "1000" :
+ speed_bits == MII_CTL_SPEED_100_MBPS ? "100" :
+ speed_bits == MII_CTL_SPEED_10_MBPS ? "10" :
+ "???");
+ return 1;
+ }
+
+ else if ((regno == 0) && (pdesc->lo == 8)) {
+ printf("%2u = %5u duplex = %s",
+ pdesc->lo,
+ (regval >> pdesc->lo) & 1,
+ ((regval >> pdesc->lo) & 1) ? "full" : "half");
+ return 1;
+ }
+
+ else if ((regno == 4) && (pdesc->lo == 0)) {
+ ushort sel_bits = (regval >> pdesc->lo) & pdesc->mask;
+ printf("%2u-%2u = %5u selector = %s",
+ pdesc->hi, pdesc->lo, sel_bits,
+ sel_bits == MII_AN_ADV_IEEE_802_3 ?
+ "IEEE 802.3" :
+ sel_bits == MII_AN_ADV_IEEE_802_9_ISLAN_16T ?
+ "IEEE 802.9 ISLAN-16T" :
+ "???");
+ return 1;
+ }
+
+ else if ((regno == 5) && (pdesc->lo == 0)) {
+ ushort sel_bits = (regval >> pdesc->lo) & pdesc->mask;
+ printf("%2u-%2u = %u selector = %s",
+ pdesc->hi, pdesc->lo, sel_bits,
+ sel_bits == MII_AN_PARTNER_IEEE_802_3 ?
+ "IEEE 802.3" :
+ sel_bits == MII_AN_PARTNER_IEEE_802_9_ISLAN_16T ?
+ "IEEE 802.9 ISLAN-16T" :
+ "???");
+ return 1;
+ }
+
+ return 0;
+}
+
+uint last_op;
+uint last_data;
+uint last_addr_lo;
+uint last_addr_hi;
+uint last_reg_lo;
+uint last_reg_hi;
+
+static void extract_range(
+ char * input,
+ unsigned char * plo,
+ unsigned char * phi)
+{
+ char * end;
+ *plo = simple_strtoul(input, &end, 16);
+ if (*end == '-') {
+ end++;
+ *phi = simple_strtoul(end, NULL, 16);
+ }
+ else {
+ *phi = *plo;
+ }
+}
+
+// ----------------------------------------------------------------
+int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ char op;
+ unsigned char addrlo, addrhi, reglo, reghi;
+ unsigned char addr, reg;
+ unsigned short data;
+ int rcode = 0;
+
+#ifdef CONFIG_8xx
+ mii_init ();
+#endif
+
+ /*
+ * We use the last specified parameters, unless new ones are
+ * entered.
+ */
+ op = last_op;
+ addrlo = last_addr_lo;
+ addrhi = last_addr_hi;
+ reglo = last_reg_lo;
+ reghi = last_reg_hi;
+ data = last_data;
+
+ if ((flag & CMD_FLAG_REPEAT) == 0) {
+ op = argv[1][0];
+ if (argc >= 3)
+ extract_range(argv[2], &addrlo, &addrhi);
+ if (argc >= 4)
+ extract_range(argv[3], &reglo, &reghi);
+ if (argc >= 5)
+ data = simple_strtoul (argv[4], NULL, 16);
+ }
+
+ /*
+ * check info/read/write.
+ */
+ if (op == 'i') {
+ unsigned char j, start, end;
+ unsigned int oui;
+ unsigned char model;
+ unsigned char rev;
+
+ /*
+ * Look for any and all PHYs. Valid addresses are 0..31.
+ */
+ if (argc >= 3) {
+ start = addr; end = addr + 1;
+ } else {
+ start = 0; end = 32;
+ }
+
+ for (j = start; j < end; j++) {
+ if (miiphy_info (j, &oui, &model, &rev) == 0) {
+ printf("PHY 0x%02X: "
+ "OUI = 0x%04X, "
+ "Model = 0x%02X, "
+ "Rev = 0x%02X, "
+ "%3dbaseT, %s\n",
+ j, oui, model, rev,
+ miiphy_speed (j),
+ miiphy_duplex (j) == FULL ? "FDX" : "HDX");
+ }
+ }
+ } else if (op == 'r') {
+ for (addr = addrlo; addr <= addrhi; addr++) {
+ for (reg = reglo; reg <= reghi; reg++) {
+ data = 0xffff;
+ if (miiphy_read (addr, reg, &data) != 0) {
+ printf(
+ "Error reading from the PHY addr=%02x reg=%02x\n",
+ addr, reg);
+ rcode = 1;
+ }
+ else {
+ if ((addrlo != addrhi) || (reglo != reghi))
+ printf("addr=%02x reg=%02x data=",
+ (uint)addr, (uint)reg);
+ printf("%04X\n", data & 0x0000FFFF);
+ }
+ }
+ if ((addrlo != addrhi) && (reglo != reghi))
+ printf("\n");
+ }
+ } else if (op == 'w') {
+ for (addr = addrlo; addr <= addrhi; addr++) {
+ for (reg = reglo; reg <= reghi; reg++) {
+ if (miiphy_write (addr, reg, data) != 0) {
+ printf("Error writing to the PHY addr=%02x reg=%02x\n",
+ addr, reg);
+ rcode = 1;
+ }
+ }
+ }
+ } else if (op == 'd') {
+ ushort regs[6];
+ int ok = 1;
+ if ((reglo > 5) || (reghi > 5)) {
+ printf(
+ "The MII dump command only formats the "
+ "standard MII registers, 0-5.\n");
+ return 1;
+ }
+ for (addr = addrlo; addr <= addrhi; addr++) {
+ for (reg = 0; reg < 6; reg++) {
+ if (miiphy_read(addr, reg, &regs[reg]) != 0) {
+ ok = 0;
+ printf(
+ "Error reading from the PHY addr=%02x reg=%02x\n",
+ addr, reg);
+ rcode = 1;
+ }
+ }
+ if (ok)
+ MII_dump_0_to_5(regs, reglo, reghi);
+ printf("\n");
+ }
+ } else {
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ /*
+ * Save the parameters for repeats.
+ */
+ last_op = op;
+ last_addr_lo = addrlo;
+ last_addr_hi = addrhi;
+ last_reg_lo = reglo;
+ last_reg_hi = reghi;
+ last_data = data;
+
+ return rcode;
+}
+
+/***************************************************/
+
+U_BOOT_CMD(
+ mii, 5, 1, do_mii,
+ "mii - MII utility commands\n",
+ "info <addr> - display MII PHY info\n"
+ "mii read <addr> <reg> - read MII PHY <addr> register <reg>\n"
+ "mii write <addr> <reg> <data> - write MII PHY <addr> register <reg>\n"
+ "mii dump <addr> <reg> - pretty-print <addr> <reg> (0-5 only)\n"
+ "Addr and/or reg may be ranges, e.g. 2-7.\n"
+);
+
+#endif /* CONFIG_TERSE_MII */
#endif /* CFG_CMD_MII */