diff options
Diffstat (limited to 'cpu/arm926ejs/at91sam9')
| -rw-r--r-- | cpu/arm926ejs/at91sam9/Makefile | 49 | ||||
| -rw-r--r-- | cpu/arm926ejs/at91sam9/config.mk | 2 | ||||
| -rw-r--r-- | cpu/arm926ejs/at91sam9/ether.c | 35 | ||||
| -rw-r--r-- | cpu/arm926ejs/at91sam9/lowlevel_init.S | 43 | ||||
| -rw-r--r-- | cpu/arm926ejs/at91sam9/spi.c | 157 | ||||
| -rw-r--r-- | cpu/arm926ejs/at91sam9/timer.c | 149 | ||||
| -rw-r--r-- | cpu/arm926ejs/at91sam9/usb.c | 54 |
7 files changed, 489 insertions, 0 deletions
diff --git a/cpu/arm926ejs/at91sam9/Makefile b/cpu/arm926ejs/at91sam9/Makefile new file mode 100644 index 0000000..203abc2 --- /dev/null +++ b/cpu/arm926ejs/at91sam9/Makefile @@ -0,0 +1,49 @@ +# +# (C) Copyright 2000-2008 +# Wolfgang Denk, DENX Software Engineering, wd <at> denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).a + +COBJS-y += ether.o +COBJS-y += timer.o +COBJS-$(CONFIG_HAS_DATAFLASH) +=spi.o +COBJS-y += usb.o +SOBJS = lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/arm926ejs/at91sam9/config.mk b/cpu/arm926ejs/at91sam9/config.mk new file mode 100644 index 0000000..ca2cae1 --- /dev/null +++ b/cpu/arm926ejs/at91sam9/config.mk @@ -0,0 +1,2 @@ +PLATFORM_CPPFLAGS += -march=armv5te +PLATFORM_CPPFLAGS += $(call cc-option,-mtune=arm926ejs,) diff --git a/cpu/arm926ejs/at91sam9/ether.c b/cpu/arm926ejs/at91sam9/ether.c new file mode 100644 index 0000000..e4f5601 --- /dev/null +++ b/cpu/arm926ejs/at91sam9/ether.c @@ -0,0 +1,35 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop <at> leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/hardware.h> + +extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); + +#if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET) +void at91sam9_eth_initialize(bd_t *bi) +{ + macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00); +} +#endif diff --git a/cpu/arm926ejs/at91sam9/lowlevel_init.S b/cpu/arm926ejs/at91sam9/lowlevel_init.S new file mode 100644 index 0000000..40a3f6a --- /dev/null +++ b/cpu/arm926ejs/at91sam9/lowlevel_init.S @@ -0,0 +1,43 @@ +/* + * AT91CAP9/SAM9 setup stuff + * + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop <at> leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + +.globl lowlevel_init +lowlevel_init: + + /* + * Clocks/SDRAM initialization is handled by at91bootstrap, + * no need to do it here... + */ + mov pc, lr + + .ltorg + +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/cpu/arm926ejs/at91sam9/spi.c b/cpu/arm926ejs/at91sam9/spi.c new file mode 100644 index 0000000..c9fe6d8 --- /dev/null +++ b/cpu/arm926ejs/at91sam9/spi.c @@ -0,0 +1,157 @@ +/* + * Driver for ATMEL DataFlash support + * Author : Hamid Ikdoumi (Atmel) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <asm/arch/hardware.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> +#include <asm/arch/at91_pio.h> +#include <asm/arch/at91_spi.h> + +#include <dataflash.h> + +#define AT91_SPI_PCS0_DATAFLASH_CARD 0xE /* Chip Select 0: NPCS0%1110 */ +#define AT91_SPI_PCS1_DATAFLASH_CARD 0xD /* Chip Select 0: NPCS0%1101 */ +#define AT91_SPI_PCS3_DATAFLASH_CARD 0x7 /* Chip Select 3: NPCS3%0111 */ + +void AT91F_SpiInit(void) +{ + /* Reset the SPI */ + writel(AT91_SPI_SWRST, AT91_BASE_SPI + AT91_SPI_CR); + + /* Configure SPI in Master Mode with No CS selected !!! */ + writel(AT91_SPI_MSTR | AT91_SPI_MODFDIS | AT91_SPI_PCS, + AT91_BASE_SPI + AT91_SPI_MR); + + /* Configure CS0 */ + writel(AT91_SPI_NCPHA | + (AT91_SPI_DLYBS & DATAFLASH_TCSS) | + (AT91_SPI_DLYBCT & DATAFLASH_TCHS) | + ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8), + AT91_BASE_SPI + AT91_SPI_CSR(0)); + +#ifdef CFG_DATAFLASH_LOGIC_ADDR_CS1 + /* Configure CS1 */ + writel(AT91_SPI_NCPHA | + (AT91_SPI_DLYBS & DATAFLASH_TCSS) | + (AT91_SPI_DLYBCT & DATAFLASH_TCHS) | + ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8), + AT91_BASE_SPI + AT91_SPI_CSR(1)); +#endif + +#ifdef CFG_DATAFLASH_LOGIC_ADDR_CS3 + /* Configure CS3 */ + writel(AT91_SPI_NCPHA | + (AT91_SPI_DLYBS & DATAFLASH_TCSS) | + (AT91_SPI_DLYBCT & DATAFLASH_TCHS) | + ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8), + AT91_BASE_SPI + AT91_SPI_CSR(3)); +#endif + + /* SPI_Enable */ + writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR); + + while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_SPIENS)); + + /* + * Add tempo to get SPI in a safe state. + * Should not be needed for new silicon (Rev B) + */ + udelay(500000); + readl(AT91_BASE_SPI + AT91_SPI_SR); + readl(AT91_BASE_SPI + AT91_SPI_RDR); + +} + +void AT91F_SpiEnable(int cs) +{ + unsigned long mode; + + switch (cs) { + case 0: /* Configure SPI CS0 for Serial DataFlash AT45DBxx */ + mode = readl(AT91_BASE_SPI + AT91_SPI_MR); + mode &= 0xFFF0FFFF; + writel(mode | ((AT91_SPI_PCS0_DATAFLASH_CARD<<16) & AT91_SPI_PCS), + AT91_BASE_SPI + AT91_SPI_MR); + break; + case 1: /* Configure SPI CS1 for Serial DataFlash AT45DBxx */ + mode = readl(AT91_BASE_SPI + AT91_SPI_MR); + mode &= 0xFFF0FFFF; + writel(mode | ((AT91_SPI_PCS1_DATAFLASH_CARD<<16) & AT91_SPI_PCS), + AT91_BASE_SPI + AT91_SPI_MR); + break; + case 3: + mode = readl(AT91_BASE_SPI + AT91_SPI_MR); + mode &= 0xFFF0FFFF; + writel(mode | ((AT91_SPI_PCS3_DATAFLASH_CARD<<16) & AT91_SPI_PCS), + AT91_BASE_SPI + AT91_SPI_MR); + break; + } + + /* SPI_Enable */ + writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR); +} + +unsigned int AT91F_SpiWrite1(AT91PS_DataflashDesc pDesc); + +unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc) +{ + unsigned int timeout; + + pDesc->state = BUSY; + + writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR); + + /* Initialize the Transmit and Receive Pointer */ + writel((unsigned int)pDesc->rx_cmd_pt, AT91_BASE_SPI + AT91_SPI_RPR); + writel((unsigned int)pDesc->tx_cmd_pt, AT91_BASE_SPI + AT91_SPI_TPR); + + /* Intialize the Transmit and Receive Counters */ + writel(pDesc->rx_cmd_size, AT91_BASE_SPI + AT91_SPI_RCR); + writel(pDesc->tx_cmd_size, AT91_BASE_SPI + AT91_SPI_TCR); + + if (pDesc->tx_data_size != 0) { + /* Initialize the Next Transmit and Next Receive Pointer */ + writel((unsigned int)pDesc->rx_data_pt, AT91_BASE_SPI + AT91_SPI_RNPR); + writel((unsigned int)pDesc->tx_data_pt, AT91_BASE_SPI + AT91_SPI_TNPR); + + /* Intialize the Next Transmit and Next Receive Counters */ + writel(pDesc->rx_data_size, AT91_BASE_SPI + AT91_SPI_RNCR); + writel(pDesc->tx_data_size, AT91_BASE_SPI + AT91_SPI_TNCR); + } + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked(); + timeout = 0; + + writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN, AT91_BASE_SPI + AT91_SPI_PTCR); + while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_RXBUFF) && + ((timeout = get_timer_masked()) < CFG_SPI_WRITE_TOUT)); + writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR); + pDesc->state = IDLE; + + if (timeout >= CFG_SPI_WRITE_TOUT) { + printf("Error Timeout\n\r"); + return DATAFLASH_ERROR; + } + + return DATAFLASH_OK; +} diff --git a/cpu/arm926ejs/at91sam9/timer.c b/cpu/arm926ejs/at91sam9/timer.c new file mode 100644 index 0000000..4e79466 --- /dev/null +++ b/cpu/arm926ejs/at91sam9/timer.c @@ -0,0 +1,149 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop <at> leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_pit.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/io.h> + +/* + * We're using the AT91CAP9/SAM9 PITC in 32 bit mode, by + * setting the 20 bit counter period to its maximum (0xfffff). + */ +#define TIMER_LOAD_VAL 0xfffff +#define READ_RESET_TIMER at91_sys_read(AT91_PIT_PIVR) +#define READ_TIMER at91_sys_read(AT91_PIT_PIIR) +#define TIMER_FREQ (AT91C_MASTER_CLOCK << 4) +#define TICKS_TO_USEC(ticks) ((ticks) / 6) + +ulong get_timer_masked(void); +ulong resettime; + +/* nothing really to do with interrupts, just starts up a counter. */ +int timer_init(void) +{ + /* + * Enable PITC Clock + * The clock is already enabled for system controller in boot + */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); + + /* Enable PITC */ + at91_sys_write(AT91_PIT_MR, TIMER_LOAD_VAL | AT91_PIT_PITEN); + + reset_timer_masked(); + + return 0; +} + +/* + * timer without interrupts + */ + +static inline ulong get_timer_raw(void) +{ + ulong now = READ_TIMER; + + if (now >= resettime) + return now - resettime; + else + return 0xFFFFFFFFUL - (resettime - now) ; +} + +void reset_timer_masked(void) +{ + resettime = READ_TIMER; +} + +ulong get_timer_masked(void) +{ + return TICKS_TO_USEC(get_timer_raw()); + +} + +void udelay_masked(unsigned long usec) +{ + ulong tmp; + + tmp = get_timer(0); + while (get_timer(tmp) < usec) /* our timer works in usecs */ + ; /* NOP */ +} + +void reset_timer(void) +{ + reset_timer_masked(); +} + +ulong get_timer(ulong base) +{ + ulong now = get_timer_masked(); + + if (now >= base) + return now - base; + else + return TICKS_TO_USEC(0xFFFFFFFFUL) - (base - now) ; +} + +void udelay(unsigned long usec) +{ + udelay_masked(usec); +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + ulong tbclk; + + tbclk = CFG_HZ; + return tbclk; +} + +/* + * Reset the cpu by setting up the watchdog timer and let him time out. + */ +void reset_cpu(ulong ignored) +{ + /* this is the way Linux does it */ + at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | + AT91_RSTC_PROCRST | + AT91_RSTC_PERRST); + + while (1); + /* Never reached */ +} diff --git a/cpu/arm926ejs/at91sam9/usb.c b/cpu/arm926ejs/at91sam9/usb.c new file mode 100644 index 0000000..d678897 --- /dev/null +++ b/cpu/arm926ejs/at91sam9/usb.c @@ -0,0 +1,54 @@ +/* + * (C) Copyright 2006 + * DENX Software Engineering <mk <at> denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT) + +#include <asm/arch/hardware.h> +#include <asm/arch/io.h> +#include <asm/arch/at91_pmc.h> + +int usb_cpu_init(void) +{ + /* Enable USB host clock. */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_UHP); + at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP); + + return 0; +} + +int usb_cpu_stop(void) +{ + /* Disable USB host clock. */ + at91_sys_write(AT91_PMC_PCDR, 1 << AT91_ID_UHP); + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP); + return 0; +} + +int usb_cpu_init_fail(void) +{ + return usb_cpu_stop(); +} + +#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */ |