summaryrefslogtreecommitdiff
path: root/cpu/mc9328/serial.c
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/mc9328/serial.c')
-rw-r--r--cpu/mc9328/serial.c133
1 files changed, 0 insertions, 133 deletions
diff --git a/cpu/mc9328/serial.c b/cpu/mc9328/serial.c
deleted file mode 100644
index 8dcfb80..0000000
--- a/cpu/mc9328/serial.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * cpu/mc9328/serial.c
- *
- * (c) Copyright 2004
- * Techware Information Technology, Inc.
- * http://www.techware.com.tw/
- *
- * Ming-Len Wu <minglen_wu@techware.com.tw>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mc9328.h>
-
-#if defined(CONFIG_UART1)
-/* GPIO PORT B */
-
-#define reg_GIUS MX1_GIUS_C
-#define reg_GPR MX1_GPR_B
-#define GPIO_MASK 0xFFFFE1FF
-#define UART_BASE 0x00206000
-
-#elif defined (CONFIG_UART2)
-/* GPIO PORT C */
-
-#define reg_GIUS MX1_GIUS_C
-#define reg_GPR MX1_GPR_C
-#define GPIO_MASK 0x0FFFFFFF
-#define UART_BASE 0x207000
-
-#endif
-
-#define reg_URXD (*((volatile u32 *)(UART_BASE+0x00)))
-#define reg_UTXD (*((volatile u32 *)(UART_BASE+0x40)))
-#define reg_UCR1 (*((volatile u32 *)(UART_BASE+0x80)))
-#define reg_UCR2 (*((volatile u32 *)(UART_BASE+0x84)))
-#define reg_UCR3 (*((volatile u32 *)(UART_BASE+0x88)))
-#define reg_UCR4 (*((volatile u32 *)(UART_BASE+0x8C)))
-#define reg_UFCR (*((volatile u32 *)(UART_BASE+0x90)))
-#define reg_USR1 (*((volatile u32 *)(UART_BASE+0x94)))
-#define reg_USR2 (*((volatile u32 *)(UART_BASE+0x98)))
-#define reg_UESC (*((volatile u32 *)(UART_BASE+0x9C)))
-#define reg_UTIM (*((volatile u32 *)(UART_BASE+0xA0)))
-#define reg_UBIR (*((volatile u32 *)(UART_BASE+0xA4)))
-#define reg_UBMR (*((volatile u32 *)(UART_BASE+0xA8)))
-#define reg_UBRC (*((volatile u32 *)(UART_BASE+0xAC)))
-
-#define TXFE_MASK 0x4000 /* Tx buffer empty */
-#define RDR_MASK 0x0001 /* receive data ready */
-
-void serial_setbrg (void) {
-
- /* config I/O pins for UART */
- reg_GIUS &= GPIO_MASK;
- reg_GPR &= GPIO_MASK;
-
- /* config UART */
- reg_UCR1 = 5;
- reg_UCR2 = 0x4027;
- reg_UCR4 = 1;
- reg_UFCR = 0xA81;
-
- reg_UBIR = 0xF;
- reg_UBMR = 0x8A;
- reg_UBRC = 8;
-}
-
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- *
- */
-
-int serial_init (void) {
- serial_setbrg ();
-
- return (0);
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise. When the function is succesfull, the character read is
- * written into its argument c.
- */
-int serial_getc (void) {
-
- while (!(reg_USR2 & RDR_MASK)) ; /* wait until RDR bit set */
-
- return (u8)reg_URXD;
-}
-
-/*
- * Output a single byte to the serial port.
- */
-void serial_putc (const char c) {
-
- while (!(reg_USR2 & TXFE_MASK)); /* wait until TXFE bit set */
-
- reg_UTXD = (u16) c;
-
- if (c == '\n') { /* carriage return ? append line-feed */
- while (!(reg_USR2 & TXFE_MASK)); /* wait until TXFE bit set */
- reg_UTXD = '\r';
- }
-
-}
-
-/*
- * Test whether a character is in the RX buffer
- */
-int serial_tstc (void) {
- return reg_USR2 & RDR_MASK;
-}
-
-void serial_puts (const char *s) {
- while (*s) {
- serial_putc (*s++);
- }
-}