summaryrefslogtreecommitdiff
path: root/cpu/mpc83xx/start.S
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/mpc83xx/start.S')
-rw-r--r--cpu/mpc83xx/start.S1093
1 files changed, 1093 insertions, 0 deletions
diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S
new file mode 100644
index 0000000..fb001a6
--- /dev/null
+++ b/cpu/mpc83xx/start.S
@@ -0,0 +1,1093 @@
+/*
+ * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
+ * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ * Copyright (C) 2000, 2001,2002 Wolfgang Denk <wd@denx.de>
+ * Copyright 2004 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * U-Boot - Startup Code for MPC83xx PowerPC based Embedded Boards
+ */
+
+#include <config.h>
+#include <mpc83xx.h>
+#include <version.h>
+
+#define CONFIG_83XX 1 /* needed for Linux kernel header files*/
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#ifndef CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING "MPC83XX"
+#endif
+
+/* We don't want the MMU yet.
+ */
+#undef MSR_KERNEL
+
+/*
+ * Floating Point enable, Machine Check and Recoverable Interr.
+ */
+#ifdef DEBUG
+#define MSR_KERNEL (MSR_FP|MSR_RI)
+#else
+#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
+#endif
+
+/*
+ * Set up GOT: Global Offset Table
+ *
+ * Use r14 to access the GOT
+ */
+ START_GOT
+ GOT_ENTRY(_GOT2_TABLE_)
+ GOT_ENTRY(_FIXUP_TABLE_)
+
+ GOT_ENTRY(_start)
+ GOT_ENTRY(_start_of_vectors)
+ GOT_ENTRY(_end_of_vectors)
+ GOT_ENTRY(transfer_to_handler)
+
+ GOT_ENTRY(__init_end)
+ GOT_ENTRY(_end)
+ GOT_ENTRY(__bss_start)
+ END_GOT
+
+/*
+ * Version string - must be in data segment because MPC83xx uses the
+ * first 256 bytes for the Hard Reset Configuration Word table (see
+ * below). Similarly, can't have the U-Boot Magic Number as the first
+ * thing in the image - don't know how this will affect the image tools,
+ * but I guess I'll find out soon.
+ */
+ .data
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", __DATE__, " - ", __TIME__, ")"
+ .ascii " ", CONFIG_IDENT_STRING, "\0"
+
+ .text
+#define _HRCW_TABLE_ENTRY(w) \
+ .fill 8,1,(((w)>>24)&0xff); \
+ .fill 8,1,(((w)>>16)&0xff); \
+ .fill 8,1,(((w)>> 8)&0xff); \
+ .fill 8,1,(((w) )&0xff)
+
+ _HRCW_TABLE_ENTRY(CFG_HRCW_LOW)
+ _HRCW_TABLE_ENTRY(CFG_HRCW_HIGH)
+
+
+#ifndef CONFIG_DEFAULT_IMMR
+#error CONFIG_DEFAULT_IMMR must be defined
+#endif /* CFG_DEFAULT_IMMR */
+#ifndef CFG_IMMRBAR
+#define CFG_IMMRBAR CONFIG_DEFAULT_IMMR
+#endif /* CFG_IMMRBAR */
+
+/*
+ * After configuration, a system reset exception is executed using the
+ * vector at offset 0x100 relative to the base set by MSR[IP]. If
+ * MSR[IP] is 0, the base address is 0x00000000. If MSR[IP] is 1, the
+ * base address is 0xfff00000. In the case of a Power On Reset or Hard
+ * Reset, the value of MSR[IP] is determined by the CIP field in the
+ * HRCW.
+ *
+ * Other bits in the HRCW set up the Base Address and Port Size in BR0.
+ * This determines the location of the boot ROM (flash or EPROM) in the
+ * processor's address space at boot time. As long as the HRCW is set up
+ * so that we eventually end up executing the code below when the
+ * processor executes the reset exception, the actual values used should
+ * not matter.
+ *
+ * Once we have got here, the address mask in OR0 is cleared so that the
+ * bottom 32K of the boot ROM is effectively repeated all throughout the
+ * processor's address space, after which we can jump to the absolute
+ * address at which the boot ROM was linked at compile time, and proceed
+ * to initialise the memory controller without worrying if the rug will
+ * be pulled out from under us, so to speak (it will be fine as long as
+ * we configure BR0 with the same boot ROM link address).
+ */
+ . = EXC_OFF_SYS_RESET
+
+ .globl _start
+_start: /* time t 0 */
+ li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH*/
+ nop
+ b boot_cold
+
+ . = EXC_OFF_SYS_RESET + 0x10
+
+ .globl _start_warm
+_start_warm:
+ li r21, BOOTFLAG_WARM /* Software reboot */
+ b boot_warm
+
+
+boot_cold: /* time t 3 */
+ lis r4, CONFIG_DEFAULT_IMMR@h
+ nop
+boot_warm: /* time t 5 */
+ mfmsr r5 /* save msr contents */
+ lis r3, CFG_IMMRBAR@h
+ ori r3, r3, CFG_IMMRBAR@l
+ stw r3, IMMRBAR(r4)
+
+ /* Initialise the E300 processor core */
+ /*------------------------------------------*/
+
+ bl init_e300_core
+
+#ifndef CFG_RAMBOOT
+
+ /* Inflate flash location so it appears everywhere, calculate */
+ /* the absolute address in final location of the FLASH, jump */
+ /* there and deflate the flash size back to minimal size */
+ /*------------------------------------------------------------*/
+ bl map_flash_by_law1
+ lis r4, (CFG_MONITOR_BASE)@h
+ ori r4, r4, (CFG_MONITOR_BASE)@l
+ addi r5, r4, in_flash - _start + EXC_OFF_SYS_RESET
+ mtlr r5
+ blr
+in_flash:
+#if 1 /* Remapping flash with LAW0. */
+ bl remap_flash_by_law0
+#endif
+#endif /* CFG_RAMBOOT */
+
+ bl setup_stack_in_data_cache_on_r1
+
+ /* let the C-code set up the rest */
+ /* */
+ /* Be careful to keep code relocatable & stack humble */
+ /*------------------------------------------------------*/
+
+ GET_GOT /* initialize GOT access */
+
+ /* r3: IMMR */
+ lis r3, CFG_IMMRBAR@h
+ /* run low-level CPU init code (in Flash)*/
+ bl cpu_init_f
+
+ /* r3: BOOTFLAG */
+ mr r3, r21
+ /* run 1st part of board init code (in Flash)*/
+ bl board_init_f
+
+/*
+ * Vector Table
+ */
+
+ .globl _start_of_vectors
+_start_of_vectors:
+
+/* Machine check */
+ STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+
+/* Data Storage exception. */
+ STD_EXCEPTION(0x300, DataStorage, UnknownException)
+
+/* Instruction Storage exception. */
+ STD_EXCEPTION(0x400, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+#ifndef FIXME
+ STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
+#endif
+
+/* Alignment exception. */
+ . = 0x600
+Alignment:
+ EXCEPTION_PROLOG
+ mfspr r4,DAR
+ stw r4,_DAR(r21)
+ mfspr r5,DSISR
+ stw r5,_DSISR(r21)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ li r20,MSR_KERNEL
+ rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
+ rlwimi r20,r23,0,25,25 /* copy IP bit from saved MSR */
+ lwz r6,GOT(transfer_to_handler)
+ mtlr r6
+ blrl
+.L_Alignment:
+ .long AlignmentException - _start + EXC_OFF_SYS_RESET
+ .long int_return - _start + EXC_OFF_SYS_RESET
+
+/* Program check exception */
+ . = 0x700
+ProgramCheck:
+ EXCEPTION_PROLOG
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ li r20,MSR_KERNEL
+ rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
+ rlwimi r20,r23,0,25,25 /* copy IP bit from saved MSR */
+ lwz r6,GOT(transfer_to_handler)
+ mtlr r6
+ blrl
+.L_ProgramCheck:
+ .long ProgramCheckException - _start + EXC_OFF_SYS_RESET
+ .long int_return - _start + EXC_OFF_SYS_RESET
+
+ STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
+
+ /* I guess we could implement decrementer, and may have
+ * to someday for timekeeping.
+ */
+ STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
+
+ STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
+ STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
+ STD_EXCEPTION(0xc00, SystemCall, UnknownException)
+ STD_EXCEPTION(0xd00, SingleStep, UnknownException)
+
+ STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
+ STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
+
+ STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
+#ifdef DEBUG
+ . = 0x1300
+ /*
+ * This exception occurs when the program counter matches the
+ * Instruction Address Breakpoint Register (IABR).
+ *
+ * I want the cpu to halt if this occurs so I can hunt around
+ * with the debugger and look at things.
+ *
+ * When DEBUG is defined, both machine check enable (in the MSR)
+ * and checkstop reset enable (in the reset mode register) are
+ * turned off and so a checkstop condition will result in the cpu
+ * halting.
+ *
+ * I force the cpu into a checkstop condition by putting an illegal
+ * instruction here (at least this is the theory).
+ *
+ * well - that didnt work, so just do an infinite loop!
+ */
+1: b 1b
+#else
+ STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
+#endif
+ STD_EXCEPTION(0x1400, SMI, UnknownException)
+
+ STD_EXCEPTION(0x1500, Trap_15, UnknownException)
+ STD_EXCEPTION(0x1600, Trap_16, UnknownException)
+ STD_EXCEPTION(0x1700, Trap_17, UnknownException)
+ STD_EXCEPTION(0x1800, Trap_18, UnknownException)
+ STD_EXCEPTION(0x1900, Trap_19, UnknownException)
+ STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
+ STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
+ STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
+ STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
+ STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
+ STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
+ STD_EXCEPTION(0x2000, Trap_20, UnknownException)
+ STD_EXCEPTION(0x2100, Trap_21, UnknownException)
+ STD_EXCEPTION(0x2200, Trap_22, UnknownException)
+ STD_EXCEPTION(0x2300, Trap_23, UnknownException)
+ STD_EXCEPTION(0x2400, Trap_24, UnknownException)
+ STD_EXCEPTION(0x2500, Trap_25, UnknownException)
+ STD_EXCEPTION(0x2600, Trap_26, UnknownException)
+ STD_EXCEPTION(0x2700, Trap_27, UnknownException)
+ STD_EXCEPTION(0x2800, Trap_28, UnknownException)
+ STD_EXCEPTION(0x2900, Trap_29, UnknownException)
+ STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
+ STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
+ STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
+ STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
+ STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
+ STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)
+
+
+ .globl _end_of_vectors
+_end_of_vectors:
+
+ . = 0x3000
+
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception.
+ * Register r21 is pointer into trap frame, r1 has new stack pointer.
+ */
+ .globl transfer_to_handler
+transfer_to_handler:
+ stw r22,_NIP(r21)
+ lis r22,MSR_POW@h
+ andc r23,r23,r22
+ stw r23,_MSR(r21)
+ SAVE_GPR(7, r21)
+ SAVE_4GPRS(8, r21)
+ SAVE_8GPRS(12, r21)
+ SAVE_8GPRS(24, r21)
+ mflr r23
+ andi. r24,r23,0x3f00 /* get vector offset */
+ stw r24,TRAP(r21)
+ li r22,0
+ stw r22,RESULT(r21)
+ lwz r24,0(r23) /* virtual address of handler */
+ lwz r23,4(r23) /* where to go when done */
+ mtspr SRR0,r24
+ mtspr SRR1,r20
+ mtlr r23
+ SYNC
+ rfi /* jump to handler, enable MMU */
+
+int_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SRR0,r2
+ mtspr SRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfi
+
+/*
+ * This code initialises the E300 processor core
+ * (conforms to PowerPC 603e spec)
+ * Note: expects original MSR contents to be in r5.
+ */
+ .globl init_e300_core
+init_e300_core: /* time t 10 */
+ /* Initialize machine status; enable machine check interrupt */
+ /*-----------------------------------------------------------*/
+
+ li r3, MSR_KERNEL /* Set ME and RI flags */
+ rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */
+#ifdef DEBUG
+ rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */
+#endif
+ SYNC /* Some chip revs need this... */
+ mtmsr r3
+ SYNC
+ mtspr SRR1, r3 /* Make SRR1 match MSR */
+
+
+ lis r3, CFG_IMMRBAR@h
+#if defined(CONFIG_WATCHDOG)
+ /* Initialise the Wathcdog values and reset it (if req) */
+ /*------------------------------------------------------*/
+ lis r4, CFG_WATCHDOG_VALUE
+ ori r4, r4, (SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
+ stw r4, SWCRR(r3)
+
+ /* and reset it */
+
+ li r4, 0x556C
+ sth r4, SWSRR@l(r3)
+ li r4, 0xAA39
+ sth r4, SWSRR@l(r3)
+#else
+ /* Disable Wathcdog */
+ /*-------------------*/
+ xor r4, r4, r4
+ stw r4, SWCRR(r3)
+#endif /* CONFIG_WATCHDOG */
+
+ /* Initialize the Hardware Implementation-dependent Registers */
+ /* HID0 also contains cache control */
+ /*------------------------------------------------------*/
+
+ lis r3, CFG_HID0_INIT@h
+ ori r3, r3, CFG_HID0_INIT@l
+ SYNC
+ mtspr HID0, r3
+
+ lis r3, CFG_HID0_FINAL@h
+ ori r3, r3, CFG_HID0_FINAL@l
+ SYNC
+ mtspr HID0, r3
+
+ lis r3, CFG_HID2@h
+ ori r3, r3, CFG_HID2@l
+ SYNC
+ mtspr HID2, r3
+
+ /* clear all BAT's */
+ /*----------------------------------*/
+
+ xor r0, r0, r0
+ mtspr DBAT0U, r0
+ mtspr DBAT0L, r0
+ mtspr DBAT1U, r0
+ mtspr DBAT1L, r0
+ mtspr DBAT2U, r0
+ mtspr DBAT2L, r0
+ mtspr DBAT3U, r0
+ mtspr DBAT3L, r0
+ mtspr IBAT0U, r0
+ mtspr IBAT0L, r0
+ mtspr IBAT1U, r0
+ mtspr IBAT1L, r0
+ mtspr IBAT2U, r0
+ mtspr IBAT2L, r0
+ mtspr IBAT3U, r0
+ mtspr IBAT3L, r0
+ SYNC
+
+ /* invalidate all tlb's
+ *
+ * From the 603e User Manual: "The 603e provides the ability to
+ * invalidate a TLB entry. The TLB Invalidate Entry (tlbie)
+ * instruction invalidates the TLB entry indexed by the EA, and
+ * operates on both the instruction and data TLBs simultaneously
+ * invalidating four TLB entries (both sets in each TLB). The
+ * index corresponds to bits 15-19 of the EA. To invalidate all
+ * entries within both TLBs, 32 tlbie instructions should be
+ * issued, incrementing this field by one each time."
+ *
+ * "Note that the tlbia instruction is not implemented on the
+ * 603e."
+ *
+ * bits 15-19 correspond to addresses 0x00000000 to 0x0001F000
+ * incrementing by 0x1000 each time. The code below is sort of
+ * based on code in "flush_tlbs" from arch/ppc/kernel/head.S
+ *
+ */
+
+ li r3, 32
+ mtctr r3
+ li r3, 0
+1: tlbie r3
+ addi r3, r3, 0x1000
+ bdnz 1b
+ SYNC
+
+ /* Done! */
+ /*------------------------------*/
+ blr
+
+/* Cache functions.
+ *
+ * Note: requires that all cache bits in
+ * HID0 are in the low half word.
+ */
+ .globl icache_enable
+icache_enable:
+ mfspr r3, HID0
+ ori r3, r3, HID0_ICE
+ lis r4, 0
+ ori r4, r4, HID0_ILOCK
+ andc r3, r3, r4
+ ori r4, r3, HID0_ICFI
+ isync
+ mtspr HID0, r4 /* sets enable and invalidate, clears lock */
+ isync
+ mtspr HID0, r3 /* clears invalidate */
+ blr
+
+ .globl icache_disable
+icache_disable:
+ mfspr r3, HID0
+ lis r4, 0
+ ori r4, r4, HID0_ICE|HID0_ILOCK
+ andc r3, r3, r4
+ ori r4, r3, HID0_ICFI
+ isync
+ mtspr HID0, r4 /* sets invalidate, clears enable and lock*/
+ isync
+ mtspr HID0, r3 /* clears invalidate */
+ blr
+
+ .globl icache_status
+icache_status:
+ mfspr r3, HID0
+ rlwinm r3, r3, HID0_ICE_SHIFT, 31, 31
+ blr
+
+ .globl dcache_enable
+dcache_enable:
+ mfspr r3, HID0
+ ori r3, r3, HID0_ENABLE_DATA_CACHE
+ lis r4, 0
+ ori r4, r4, HID0_LOCK_DATA_CACHE
+ andc r3, r3, r4
+ ori r4, r3, HID0_LOCK_INSTRUCTION_CACHE
+ sync
+ mtspr HID0, r4 /* sets enable and invalidate, clears lock */
+ sync
+ mtspr HID0, r3 /* clears invalidate */
+ blr
+
+ .globl dcache_disable
+dcache_disable:
+ mfspr r3, HID0
+ lis r4, 0
+ ori r4, r4, HID0_ENABLE_DATA_CACHE|HID0_LOCK_DATA_CACHE
+ andc r3, r3, r4
+ ori r4, r3, HID0_INVALIDATE_DATA_CACHE
+ sync
+ mtspr HID0, r4 /* sets invalidate, clears enable and lock */
+ sync
+ mtspr HID0, r3 /* clears invalidate */
+ blr
+
+ .globl dcache_status
+dcache_status:
+ mfspr r3, HID0
+ rlwinm r3, r3, HID0_DCE_SHIFT, 31, 31
+ blr
+
+ .globl get_pvr
+get_pvr:
+ mfspr r3, PVR
+ blr
+
+/*-------------------------------------------------------------------*/
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+ .globl relocate_code
+relocate_code:
+ mr r1, r3 /* Set new stack pointer */
+ mr r9, r4 /* Save copy of Global Data pointer */
+ mr r10, r5 /* Save copy of Destination Address */
+
+ mr r3, r5 /* Destination Address */
+ lis r4, CFG_MONITOR_BASE@h /* Source Address */
+ ori r4, r4, CFG_MONITOR_BASE@l
+ lwz r5, GOT(__init_end)
+ sub r5, r5, r4
+ li r6, CFG_CACHELINE_SIZE /* Cache Line Size */
+
+ /*
+ * Fix GOT pointer:
+ *
+ * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE)
+ * + Destination Address
+ *
+ * Offset:
+ */
+ sub r15, r10, r4
+
+ /* First our own GOT */
+ add r14, r14, r15
+ /* then the one used by the C code */
+ add r30, r30, r15
+
+ /*
+ * Now relocate code
+ */
+
+ cmplw cr1,r3,r4
+ addi r0,r5,3
+ srwi. r0,r0,2
+ beq cr1,4f /* In place copy is not necessary */
+ beq 7f /* Protect against 0 count */
+ mtctr r0
+ bge cr1,2f
+ la r8,-4(r4)
+ la r7,-4(r3)
+
+ /* copy */
+1: lwzu r0,4(r8)
+ stwu r0,4(r7)
+ bdnz 1b
+
+ addi r0,r5,3
+ srwi. r0,r0,2
+ mtctr r0
+ la r8,-4(r4)
+ la r7,-4(r3)
+
+ /* and compare */
+20: lwzu r20,4(r8)
+ lwzu r21,4(r7)
+ xor. r22, r20, r21
+ bne 30f
+ bdnz 20b
+ b 4f
+
+ /* compare failed */
+30: li r3, 0
+ blr
+
+2: slwi r0,r0,2 /* re copy in reverse order ... y do we needed it? */
+ add r8,r4,r0
+ add r7,r3,r0
+3: lwzu r0,-4(r8)
+ stwu r0,-4(r7)
+ bdnz 3b
+
+/*
+ * Now flush the cache: note that we must start from a cache aligned
+ * address. Otherwise we might miss one cache line.
+ */
+4:
+ bl un_setup_stack_in_data_cache
+ mr r7, r3
+ mr r8, r4
+ bl dcache_disable
+ mr r3, r7
+ mr r4, r8
+
+ cmpwi r6,0
+ add r5,r3,r5
+ beq 7f /* Always flush prefetch queue in any case */
+ subi r0,r6,1
+ andc r3,r3,r0
+ mfspr r7,HID0 /* don't do dcbst if dcache is disabled*/
+ rlwinm r7,r7,HID0_DCE_SHIFT,31,31
+ cmpwi r7,0
+ beq 9f
+ mr r4,r3
+5: dcbst 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 5b
+ sync /* Wait for all dcbst to complete on bus */
+9: mfspr r7,HID0 /* don't do icbi if icache is disabled */
+ rlwinm r7,r7,HID0_DCE_SHIFT,31,31
+ cmpwi r7,0
+ beq 7f
+ mr r4,r3
+6: icbi 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 6b
+7: sync /* Wait for all icbi to complete on bus */
+ isync
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+
+ addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
+ mtlr r0
+ blr
+
+in_ram:
+
+ /*
+ * Relocation Function, r14 point to got2+0x8000
+ *
+ * Adjust got2 pointers, no need to check for 0, this code
+ * already puts a few entries in the table.
+ */
+ li r0,__got2_entries@sectoff@l
+ la r3,GOT(_GOT2_TABLE_)
+ lwz r11,GOT(_GOT2_TABLE_)
+ mtctr r0
+ sub r11,r3,r11
+ addi r3,r3,-4
+1: lwzu r0,4(r3)
+ add r0,r0,r11
+ stw r0,0(r3)
+ bdnz 1b
+
+ /*
+ * Now adjust the fixups and the pointers to the fixups
+ * in case we need to move ourselves again.
+ */
+2: li r0,__fixup_entries@sectoff@l
+ lwz r3,GOT(_FIXUP_TABLE_)
+ cmpwi r0,0
+ mtctr r0
+ addi r3,r3,-4
+ beq 4f
+3: lwzu r4,4(r3)
+ lwzux r0,r4,r11
+ add r0,r0,r11
+ stw r10,0(r3)
+ stw r0,0(r4)
+ bdnz 3b
+4:
+clear_bss:
+ /*
+ * Now clear BSS segment
+ */
+ lwz r3,GOT(__bss_start)
+#if defined(CONFIG_HYMOD)
+ /*
+ * For HYMOD - the environment is the very last item in flash.
+ * The real .bss stops just before environment starts, so only
+ * clear up to that point.
+ *
+ * taken from mods for FADS board
+ */
+ lwz r4,GOT(environment)
+#else
+ lwz r4,GOT(_end)
+#endif
+
+ cmplw 0, r3, r4
+ beq 6f
+
+ li r0, 0
+5:
+ stw r0, 0(r3)
+ addi r3, r3, 4
+ cmplw 0, r3, r4
+ bne 5b
+6:
+
+ mr r3, r9 /* Global Data pointer */
+ mr r4, r10 /* Destination Address */
+ bl board_init_r
+
+ /*
+ * Copy exception vector code to low memory
+ *
+ * r3: dest_addr
+ * r7: source address, r8: end address, r9: target address
+ */
+ .globl trap_init
+trap_init:
+ lwz r7, GOT(_start)
+ lwz r8, GOT(_end_of_vectors)
+
+ li r9, 0x100 /* reset vector always at 0x100 */
+
+ cmplw 0, r7, r8
+ bgelr /* return if r7>=r8 - just in case */
+
+ mflr r4 /* save link register */
+1:
+ lwz r0, 0(r7)
+ stw r0, 0(r9)
+ addi r7, r7, 4
+ addi r9, r9, 4
+ cmplw 0, r7, r8
+ bne 1b
+
+ /*
+ * relocate `hdlr' and `int_return' entries
+ */
+ li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
+ li r8, Alignment - _start + EXC_OFF_SYS_RESET
+2:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 2b
+
+ li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
+ li r8, SystemCall - _start + EXC_OFF_SYS_RESET
+3:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 3b
+
+ li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
+ li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
+4:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 4b
+
+ mfmsr r3 /* now that the vectors have */
+ lis r7, MSR_IP@h /* relocated into low memory */
+ ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
+ andc r3, r3, r7 /* (if it was on) */
+ SYNC /* Some chip revs need this... */
+ mtmsr r3
+ SYNC
+
+ mtlr r4 /* restore link register */
+ blr
+
+ /*
+ * Function: relocate entries for one exception vector
+ */
+trap_reloc:
+ lwz r0, 0(r7) /* hdlr ... */
+ add r0, r0, r3 /* ... += dest_addr */
+ stw r0, 0(r7)
+
+ lwz r0, 4(r7) /* int_return ... */
+ add r0, r0, r3 /* ... += dest_addr */
+ stw r0, 4(r7)
+
+ blr
+
+#ifdef CFG_INIT_RAM_LOCK
+.globl unlock_ram_in_cache
+unlock_ram_in_cache:
+ /* invalidate the INIT_RAM section */
+ lis r3, (CFG_INIT_RAM_ADDR & ~31)@h
+ ori r3, r3, (CFG_INIT_RAM_ADDR & ~31)@l
+ li r2,512
+ mtctr r2
+1: icbi r0, r3
+ dcbi r0, r3
+ addi r3, r3, 32
+ bdnz 1b
+ sync /* Wait for all icbi to complete on bus */
+ isync
+ blr
+#endif
+
+map_flash_by_law1:
+ /* When booting from ROM (Flash or EPROM), clear the */
+ /* Address Mask in OR0 so ROM appears everywhere */
+ /*----------------------------------------------------*/
+ lis r3, (CFG_IMMRBAR)@h /* r3 <= CFG_IMMRBAR */
+ lwz r4, OR0@l(r3)
+ li r5, 0x7fff /* r5 <= 0x00007FFFF */
+ and r4, r4, r5
+ stw r4, OR0@l(r3) /* OR0 <= OR0 & 0x00007FFFF */
+
+ /* As MPC8349E User's Manual presented, when RCW[BMS] is set to 0,
+ * system will boot from 0x0000_0100, and the LBLAWBAR0[BASE_ADDR]
+ * reset value is 0x00000; when RCW[BMS] is set to 1, system will boot
+ * from 0xFFF0_0100, and the LBLAWBAR0[BASE_ADDR] reset value is
+ * 0xFF800. From the hard resetting to here, the processor fetched and
+ * executed the instructions one by one. There is not absolutely
+ * jumping happened. Laterly, the u-boot code has to do an absolutely
+ * jumping to tell the CPU instruction fetching component what the
+ * u-boot TEXT base address is. Because the TEXT base resides in the
+ * boot ROM memory space, to garantee the code can run smoothly after
+ * that jumping, we must map in the entire boot ROM by Local Access
+ * Window. Sometimes, we desire an non-0x00000 or non-0xFF800 starting
+ * address for boot ROM, such as 0xFE000000. In this case, the default
+ * LBIU Local Access Widow 0 will not cover this memory space. So, we
+ * need another window to map in it.
+ */
+ lis r4, (CFG_FLASH_BASE)@h
+ ori r4, r4, (CFG_FLASH_BASE)@l
+ stw r4, LBLAWBAR1(r3) /* LBLAWBAR1 <= CFG_FLASH_BASE */
+ lis r4, (0x80000016)@h
+ ori r4, r4, (0x80000016)@l
+ stw r4, LBLAWAR1(r3) /* LBLAWAR1 <= 8MB Flash Size */
+ blr
+
+ /* Though all the LBIU Local Access Windows and LBC Banks will be
+ * initialized in the C code, we'd better configure boot ROM's
+ * window 0 and bank 0 correctly at here.
+ */
+remap_flash_by_law0:
+ /* Initialize the BR0 with the boot ROM starting address. */
+ lwz r4, BR0(r3)
+ li r5, 0x7FFF
+ and r4, r4, r5
+ lis r5, (CFG_FLASH_BASE & 0xFFFF8000)@h
+ ori r5, r5, (CFG_FLASH_BASE & 0xFFFF8000)@l
+ or r5, r5, r4
+ stw r5, BR0(r3) /* r5 <= (CFG_FLASH_BASE & 0xFFFF8000) | (BR0 & 0x00007FFF) */
+
+ lwz r4, OR0(r3)
+ lis r5, 0xFF80 /* 8M */
+ or r4, r4, r5
+ stw r4, OR0(r3) /* OR0 <= OR0 | 0xFF800000 */
+
+ lis r4, (CFG_FLASH_BASE)@h
+ ori r4, r4, (CFG_FLASH_BASE)@l
+ stw r4, LBLAWBAR0(r3) /* LBLAWBAR0 <= CFG_FLASH_BASE */
+
+ lis r4, (0x80000016)@h
+ ori r4, r4, (0x80000016)@l
+ stw r4, LBLAWAR0(r3) /* LBLAWAR0 <= 8MB Flash Size */
+
+ xor r4, r4, r4
+ stw r4, LBLAWBAR1(r3)
+ stw r4, LBLAWAR1(r3) /* Off LBIU LAW1 */
+ blr
+
+setup_stack_in_data_cache_on_r1:
+ lis r3, (CFG_IMMRBAR)@h
+
+ /* setup D-BAT for the D-Cache (with out real memory backup) */
+
+ lis r4, (CFG_INIT_RAM_ADDR & 0xFFFE0000)@h
+ mtspr DBAT0U, r4
+ ori r4, r4, 0x0002
+ mtspr DBAT0L, r4
+ isync
+
+#if 0
+ /* Enable MMU */
+ mfmsr r4
+ ori r4, r4, (MSR_DR | MSR_IR)@l
+ mtmsr r4
+#endif
+
+ /* Enable and invalidate data cache. */
+ mfspr r4, HID0
+ mr r5, r4
+ ori r4, r4, HID0_DCE | HID0_DCI
+ ori r5, r5, HID0_DCE
+ sync
+ mtspr HID0, r4
+ mtspr HID0, r5
+ sync
+
+ /* Allocate Initial RAM in data cache.*/
+ li r0, 0
+ lis r4, (CFG_INIT_RAM_ADDR)@h
+ ori r4, r4, (CFG_INIT_RAM_ADDR)@l
+ li r5, 128*8 /* 128*8*32=32Kb */
+ mtctr r5
+1:
+ dcbz r0, r4
+ addi r4, r4, 32
+ bdnz 1b
+ isync
+
+ /* Lock all the D-cache, basically leaving the reset of the program without dcache */
+ mfspr r4, HID0
+ ori r4, r4, (HID0_DLOCK)@l
+ sync
+ mtspr HID0 , r4
+
+ /* setup the stack pointer in r1 */
+ lis r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@h
+ ori r1, r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@l
+ li r0, 0 /* Make room for stack frame header and */
+
+ stwu r0, -4(r1) /* clear final stack frame so that */
+ stwu r0, -4(r1) /* stack backtraces terminate cleanly */
+
+ blr
+
+un_setup_stack_in_data_cache:
+ blr
+ mr r14, r4
+ mr r15, r5
+
+
+ lis r4, (CFG_INIT_RAM_ADDR & 0xFFFE0000)@h
+ mtspr DBAT0U, r4
+ ori r4, r4, 0x0002
+ mtspr DBAT0L, r4
+ isync
+
+ /* un lock all the D-cache */
+ mfspr r4, HID0
+ lis r5, (~(HID0_DLOCK))@h
+ ori r5, r5, (~(HID0_DLOCK))@l
+ and r4, r4, r5
+ sync
+ mtspr HID0 , r4
+
+ /* Re - Allocate Initial RAM in data cache.*/
+ li r0, 0
+ lis r4, (CFG_INIT_RAM_ADDR)@h
+ ori r4, r4, (CFG_INIT_RAM_ADDR)@l
+ li r5, 128*8 /* 128*8*32=32Kb */
+ mtctr r5
+1:
+ dcbz r0, r4
+ addi r4, r4, 32
+ bdnz 1b
+ isync
+
+ mflr r16
+ bl dcache_disable
+ mtlr r16
+
+ blr
+
+#if 0
+#define GREEN_LIGHT 0x2B0D4046
+#define RED_LIGHT 0x250D4046
+#define LIB_CNT 0x4FFF
+
+/*
+ * Lib Light
+ */
+
+ .globl liblight
+liblight:
+ lis r3, CFG_IMMRBAR@h
+ ori r3, r3, CFG_IMMRBAR@l
+ li r4, 0x3002
+ mtmsr r4
+ xor r4, r4, r4
+ mtspr HID0, r4
+ mtspr HID2, r4
+ lis r4, 0xF8000000@h
+ ori r4, r4, 0xF8000000@l
+ stw r4, LBLAWBAR1(r3)
+ lis r4, 0x8000000E@h
+ ori r4, r4, 0x8000000E@l
+ stw r4, LBLAWAR1(r3)
+ lis r4, 0xF8000801@h
+ ori r4, r4, 0xF8000801@l
+ stw r4, BR1(r3)
+ lis r4, 0xFFFFE8f0@h
+ ori r4, r4, 0xFFFFE8f0@l
+ stw r4, OR1(r3)
+
+ lis r4, 0xF8000000@h
+ ori r4, r4, 0xF8000000@l
+ lis r5, GREEN_LIGHT@h
+ ori r5, r5, GREEN_LIGHT@l
+ lis r6, RED_LIGHT@h
+ ori r6, r6, RED_LIGHT@l
+ lis r7, LIB_CNT@h
+ ori r7, r7, LIB_CNT@l
+
+1:
+ stw r5, 0(r4)
+ mtctr r7
+2: bdnz 2b
+ stw r6, 0(r4)
+ mtctr r7
+3: bdnz 3b
+ b 1b
+
+#endif