diff options
Diffstat (limited to 'cpu/mpc85xx/release.S')
| -rw-r--r-- | cpu/mpc85xx/release.S | 182 |
1 files changed, 182 insertions, 0 deletions
diff --git a/cpu/mpc85xx/release.S b/cpu/mpc85xx/release.S new file mode 100644 index 0000000..3b7366f --- /dev/null +++ b/cpu/mpc85xx/release.S @@ -0,0 +1,182 @@ +#include <config.h> +#include <mpc85xx.h> +#include <version.h> + +#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ + +#include <ppc_asm.tmpl> +#include <ppc_defs.h> + +#include <asm/cache.h> +#include <asm/mmu.h> + +/* To boot secondary cpus, we need a place for them to start up. + * Normally, they start at 0xfffffffc, but that's usually the + * firmware, and we don't want to have to run the firmware again. + * Instead, the primary cpu will set the BPTR to point here to + * this page. We then set up the core, and head to + * start_secondary. Note that this means that the code below + * must never exceed 1023 instructions (the branch at the end + * would then be the 1024th). + */ + .globl __secondary_start_page + .align 12 +__secondary_start_page: +/* First do some preliminary setup */ + lis r3, HID0_EMCP@h /* enable machine check */ + ori r3,r3,HID0_TBEN@l /* enable Timebase */ +#ifdef CONFIG_PHYS_64BIT + ori r3,r3,HID0_ENMAS7@l /* enable MAS7 updates */ +#endif + mtspr SPRN_HID0,r3 + + li r3,(HID1_ASTME|HID1_ABE)@l /* Addr streaming & broadcast */ + mtspr SPRN_HID1,r3 + + /* Enable branch prediction */ + li r3,0x201 + mtspr SPRN_BUCSR,r3 + + /* Enable/invalidate the I-Cache */ + mfspr r0,SPRN_L1CSR1 + ori r0,r0,(L1CSR1_ICFI|L1CSR1_ICE) + mtspr SPRN_L1CSR1,r0 + isync + + /* Enable/invalidate the D-Cache */ + mfspr r0,SPRN_L1CSR0 + ori r0,r0,(L1CSR0_DCFI|L1CSR0_DCE) + msync + isync + mtspr SPRN_L1CSR0,r0 + isync + +#define toreset(x) (x - __secondary_start_page + 0xfffff000) + + /* get our PIR to figure out our table entry */ + lis r3,toreset(__spin_table)@h + ori r3,r3,toreset(__spin_table)@l + + /* r10 has the base address for the entry */ + mfspr r0,SPRN_PIR + mr r4,r0 + slwi r8,r4,5 + add r10,r3,r8 + +#define EPAPR_MAGIC (0x45504150) +#define ENTRY_ADDR_UPPER 0 +#define ENTRY_ADDR_LOWER 4 +#define ENTRY_R3_UPPER 8 +#define ENTRY_R3_LOWER 12 +#define ENTRY_RESV 16 +#define ENTRY_PIR 20 +#define ENTRY_R6_UPPER 24 +#define ENTRY_R6_LOWER 28 +#define ENTRY_SIZE 32 + + /* setup the entry */ + li r3,0 + li r8,1 + stw r0,ENTRY_PIR(r10) + stw r3,ENTRY_ADDR_UPPER(r10) + stw r8,ENTRY_ADDR_LOWER(r10) + stw r3,ENTRY_R3_UPPER(r10) + stw r4,ENTRY_R3_LOWER(r10) + stw r3,ENTRY_R6_UPPER(r10) + stw r3,ENTRY_R6_LOWER(r10) + + /* setup mapping for AS = 1, and jump there */ + lis r11,(MAS0_TLBSEL(1)|MAS0_ESEL(1))@h + mtspr SPRN_MAS0,r11 + lis r11,(MAS1_VALID|MAS1_IPROT)@h + ori r11,r11,(MAS1_TS|MAS1_TSIZE(BOOKE_PAGESZ_4K))@l + mtspr SPRN_MAS1,r11 + lis r11,(0xfffff000|MAS2_I)@h + ori r11,r11,(0xfffff000|MAS2_I)@l + mtspr SPRN_MAS2,r11 + lis r11,(0xfffff000|MAS3_SX|MAS3_SW|MAS3_SR)@h + ori r11,r11,(0xfffff000|MAS3_SX|MAS3_SW|MAS3_SR)@l + mtspr SPRN_MAS3,r11 + tlbwe + + bl 1f +1: mflr r11 + addi r11,r11,28 + mfmsr r13 + ori r12,r13,MSR_IS|MSR_DS@l + + mtspr SPRN_SRR0,r11 + mtspr SPRN_SRR1,r12 + rfi + + /* spin waiting for addr */ +2: + lwz r4,ENTRY_ADDR_LOWER(r10) + andi. r11,r4,1 + bne 2b + + /* get the upper bits of the addr */ + lwz r11,ENTRY_ADDR_UPPER(r10) + + /* setup branch addr */ + mtspr SPRN_SRR0,r4 + + /* mark the entry as released */ + li r8,3 + stw r8,ENTRY_ADDR_LOWER(r10) + + /* mask by ~64M to setup our tlb we will jump to */ + rlwinm r12,r4,0,0,5 + + /* setup r3, r4, r5, r6, r7, r8, r9 */ + lwz r3,ENTRY_R3_LOWER(r10) + li r4,0 + li r5,0 + lwz r6,ENTRY_R6_LOWER(r10) + lis r7,(64*1024*1024)@h + li r8,0 + li r9,0 + + /* load up the pir */ + lwz r0,ENTRY_PIR(r10) + mtspr SPRN_PIR,r0 + mfspr r0,SPRN_PIR + stw r0,ENTRY_PIR(r10) + +/* + * Coming here, we know the cpu has one TLB mapping in TLB1[0] + * which maps 0xfffff000-0xffffffff one-to-one. We set up a + * second mapping that maps addr 1:1 for 64M, and then we jump to + * addr + */ + lis r10,(MAS0_TLBSEL(1)|MAS0_ESEL(0))@h + mtspr SPRN_MAS0,r10 + lis r10,(MAS1_VALID|MAS1_IPROT)@h + ori r10,r10,(MAS1_TSIZE(BOOKE_PAGESZ_64M))@l + mtspr SPRN_MAS1,r10 + /* WIMGE = 0b00000 for now */ + mtspr SPRN_MAS2,r12 + ori r12,r12,(MAS3_SX|MAS3_SW|MAS3_SR) + mtspr SPRN_MAS3,r12 +#ifdef CONFIG_ENABLE_36BIT_PHYS + mtspr SPRN_MAS7,r11 +#endif + tlbwe + +/* Now we have another mapping for this page, so we jump to that + * mapping + */ + mtspr SPRN_SRR1,r13 + rfi + + .align 3 + .globl __spin_table +__spin_table: + .space CONFIG_NR_CPUS*ENTRY_SIZE + + /* Fill in the empty space. The actual reset vector is + * the last word of the page */ +__secondary_start_code_end: + .space 4092 - (__secondary_start_code_end - __secondary_start_page) +__secondary_reset_vector: + b __secondary_start_page |