diff options
Diffstat (limited to 'cpu/mpc8xxx/ddr')
-rw-r--r-- | cpu/mpc8xxx/ddr/main.c | 43 | ||||
-rw-r--r-- | cpu/mpc8xxx/ddr/util.c | 96 |
2 files changed, 98 insertions, 41 deletions
diff --git a/cpu/mpc8xxx/ddr/main.c b/cpu/mpc8xxx/ddr/main.c index 6dae26b..faa1af9 100644 --- a/cpu/mpc8xxx/ddr/main.c +++ b/cpu/mpc8xxx/ddr/main.c @@ -162,28 +162,9 @@ int step_assign_addresses(fsl_ddr_info_t *pinfo, j++; } } - if (j == 2) { + if (j == 2) *memctl_interleaving = 1; - printf("\nMemory controller interleaving enabled: "); - - switch (pinfo->memctl_opts[0].memctl_interleaving_mode) { - case FSL_DDR_CACHE_LINE_INTERLEAVING: - printf("Cache-line interleaving!\n"); - break; - case FSL_DDR_PAGE_INTERLEAVING: - printf("Page interleaving!\n"); - break; - case FSL_DDR_BANK_INTERLEAVING: - printf("Bank interleaving!\n"); - break; - case FSL_DDR_SUPERBANK_INTERLEAVING: - printf("Super bank interleaving\n"); - default: - break; - } - } - /* Check that all controllers are rank interleaving. */ j = 0; for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { @@ -191,29 +172,9 @@ int step_assign_addresses(fsl_ddr_info_t *pinfo, j++; } } - if (j == 2) { + if (j == 2) *rank_interleaving = 1; - printf("Bank(chip-select) interleaving enabled: "); - - switch (pinfo->memctl_opts[0].ba_intlv_ctl & - FSL_DDR_CS0_CS1_CS2_CS3) { - case FSL_DDR_CS0_CS1_CS2_CS3: - printf("CS0+CS1+CS2+CS3\n"); - break; - case FSL_DDR_CS0_CS1: - printf("CS0+CS1\n"); - break; - case FSL_DDR_CS2_CS3: - printf("CS2+CS3\n"); - break; - case FSL_DDR_CS0_CS1_AND_CS2_CS3: - printf("CS0+CS1 and CS2+CS3\n"); - default: - break; - } - } - if (*memctl_interleaving) { unsigned long long addr, total_mem_per_ctlr = 0; /* diff --git a/cpu/mpc8xxx/ddr/util.c b/cpu/mpc8xxx/ddr/util.c index 70dbee0..4451989 100644 --- a/cpu/mpc8xxx/ddr/util.c +++ b/cpu/mpc8xxx/ddr/util.c @@ -107,3 +107,99 @@ __attribute__((weak, alias("__fsl_ddr_set_lawbar"))) void fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params, unsigned int memctl_interleaved, unsigned int ctrl_num); + +void board_add_ram_info(int use_default) +{ +#if defined(CONFIG_MPC85xx) + volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); +#elif defined(CONFIG_MPC86xx) + volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC86xx_DDR_ADDR); +#endif +#if (CONFIG_NUM_DDR_CONTROLLERS > 1) + uint32_t cs0_config = in_be32(&ddr->cs0_config); +#endif + uint32_t sdram_cfg = in_be32(&ddr->sdram_cfg); + int cas_lat; + + puts(" (DDR"); + switch ((sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >> + SDRAM_CFG_SDRAM_TYPE_SHIFT) { + case SDRAM_TYPE_DDR1: + puts("1"); + break; + case SDRAM_TYPE_DDR2: + puts("2"); + break; + case SDRAM_TYPE_DDR3: + puts("3"); + break; + default: + puts("?"); + break; + } + + if (sdram_cfg & SDRAM_CFG_32_BE) + puts(", 32-bit"); + else + puts(", 64-bit"); + + /* Calculate CAS latency based on timing cfg values */ + cas_lat = ((in_be32(&ddr->timing_cfg_1) >> 16) & 0xf) + 1; + if ((in_be32(&ddr->timing_cfg_3) >> 12) & 1) + cas_lat += (8 << 1); + printf(", CL=%d", cas_lat >> 1); + if (cas_lat & 0x1) + puts(".5"); + + if (sdram_cfg & SDRAM_CFG_ECC_EN) + puts(", ECC on)"); + else + puts(", ECC off)"); + +#if (CONFIG_NUM_DDR_CONTROLLERS > 1) + if (cs0_config & 0x20000000) { + puts("\n"); + puts(" DDR Controller Interleaving Mode: "); + + switch ((cs0_config >> 24) & 0xf) { + case FSL_DDR_CACHE_LINE_INTERLEAVING: + puts("cache line"); + break; + case FSL_DDR_PAGE_INTERLEAVING: + puts("page"); + break; + case FSL_DDR_BANK_INTERLEAVING: + puts("bank"); + break; + case FSL_DDR_SUPERBANK_INTERLEAVING: + puts("super-bank"); + break; + default: + puts("invalid"); + break; + } + } +#endif + + if ((sdram_cfg >> 8) & 0x7f) { + puts("\n"); + puts(" DDR Chip-Select Interleaving Mode: "); + switch(sdram_cfg >> 8 & 0x7f) { + case FSL_DDR_CS0_CS1_CS2_CS3: + puts("CS0+CS1+CS2+CS3"); + break; + case FSL_DDR_CS0_CS1: + puts("CS0+CS1"); + break; + case FSL_DDR_CS2_CS3: + puts("CS2+CS3"); + break; + case FSL_DDR_CS0_CS1_AND_CS2_CS3: + puts("CS0+CS1 and CS2+CS3"); + break; + default: + puts("invalid"); + break; + } + } +} |