summaryrefslogtreecommitdiff
path: root/doc/README.arm-relocation
diff options
context:
space:
mode:
Diffstat (limited to 'doc/README.arm-relocation')
-rw-r--r--doc/README.arm-relocation14
1 files changed, 7 insertions, 7 deletions
diff --git a/doc/README.arm-relocation b/doc/README.arm-relocation
index 3856633..dc7be7e 100644
--- a/doc/README.arm-relocation
+++ b/doc/README.arm-relocation
@@ -93,7 +93,7 @@ Relocation with NAND_SPL (example for the tx25):
and start with code execution on this address.
- The First page contains u-boot code from u-boot:nand_spl/nand_boot_fsl_nfc.c
- which inits the dram, cpu registers, reloacte itself to CONFIG_SYS_TEXT_BASE and loads
+ which inits the dram, cpu registers, reloacte itself to CONFIG_SYS_TEXT_BASE and loads
the "real" u-boot to CONFIG_SYS_NAND_U_BOOT_DST and starts execution
@CONFIG_SYS_NAND_U_BOOT_START
@@ -162,7 +162,7 @@ e) load new symbol table:
(gdb) add-symbol-file u-boot 0x8ff08000
add symbol table from file "u-boot" at
- .text_addr = 0x8ff08000
+ .text_addr = 0x8ff08000
(y or n) y
Reading symbols from /home/hs/celf/u-boot/u-boot...done.
(gdb) c
@@ -170,12 +170,12 @@ Continuing.
^C
Program received signal SIGSTOP, Stopped (signal).
0x8ff17f18 in serial_getc () at serial_mxc.c:192
-192 while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY);
+192 while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY);
(gdb)
add-symbol-file u-boot 0x8ff08000
- ^^^^^^^^^^
- get this address from u-boot debug printfs
+ ^^^^^^^^^^
+ get this address from u-boot debug printfs
U-Boot 2010.06-rc2-00009-gf77b8b8-dirty (Jun 22 2010 - 09:43:46)
@@ -187,7 +187,7 @@ Top of RAM usable for U-Boot at: 90000000
LCD panel info: 640 x 480, 16 bit/pix
Reserving 600k for LCD Framebuffer at: 8ff6a000
Reserving 391k for U-Boot at: 8ff08000
- ^^^^^^^^
+ ^^^^^^^^
Reserving 1280k for malloc() at: 8fdc8000
Reserving 24 Bytes for Board Info at: 8fdc7fe8
Reserving 52 Bytes for Global Data at: 8fdc7fb4
@@ -197,6 +197,6 @@ Bank #0: 80000000 256 MiB
relocation Offset is: eff08000
mon: 00058BAC gd->monLen: 00061F10
Now running in RAM - U-Boot at: 8ff08000
- ^^^^^^^^
+ ^^^^^^^^
Now you can use gdb as usual :-)