summaryrefslogtreecommitdiff
path: root/doc/README.at91
diff options
context:
space:
mode:
Diffstat (limited to 'doc/README.at91')
-rw-r--r--doc/README.at9184
1 files changed, 67 insertions, 17 deletions
diff --git a/doc/README.at91 b/doc/README.at91
index b51df00..6741213 100644
--- a/doc/README.at91
+++ b/doc/README.at91
@@ -1,6 +1,9 @@
Atmel AT91 Evaluation kits
-http://atmel.com/dyn/products/tools.asp?family_id=605#1443
+Index
+ - I. Board mapping & boot media
+ - II. NAND partition table
+ - III. watchdog support
I. Board mapping & boot media
------------------------------------------------------------------------------
@@ -10,7 +13,7 @@ AT91SAM9260EK, AT91SAM9G20EK & AT91SAM9XEEK
Memory map
0x20000000 - 23FFFFFF SDRAM (64 MB)
0xC0000000 - Cxxxxxxx Atmel Dataflash card (J13)
- 0xD0000000 - Dxxxxxxx Soldered Atmel Dataflash
+ 0xD0000000 - D07FFFFF Soldered Atmel Dataflash (AT45DB642)
Environment variables
@@ -20,7 +23,6 @@ Environment variables
- Nand flash.
You can choose your storage location at config step (here for at91sam9260ek) :
- make at91sam9260ek_config - use data flash (spi cs1) (default)
make at91sam9260ek_nandflash_config - use nand flash
make at91sam9260ek_dataflash_cs0_config - use data flash (spi cs0)
make at91sam9260ek_dataflash_cs1_config - use data flash (spi cs1)
@@ -32,7 +34,7 @@ AT91SAM9261EK, AT91SAM9G10EK
Memory map
0x20000000 - 23FFFFFF SDRAM (64 MB)
- 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash
+ 0xC0000000 - C07FFFFF Soldered Atmel Dataflash (AT45DB642)
0xD0000000 - Dxxxxxxx Atmel Dataflash card (J22)
Environment variables
@@ -43,7 +45,6 @@ Environment variables
- Nand flash.
You can choose your storage location at config step (here for at91sam9260ek) :
- make at91sam9261ek_config - use data flash (spi cs0) (default)
make at91sam9261ek_nandflash_config - use nand flash
make at91sam9261ek_dataflash_cs0_config - use data flash (spi cs0)
make at91sam9261ek_dataflash_cs3_config - use data flash (spi cs3)
@@ -65,7 +66,6 @@ Environment variables
- Nor flash (not populate by default)
You can choose your storage location at config step (here for at91sam9260ek) :
- make at91sam9263ek_config - use data flash (spi cs0) (default)
make at91sam9263ek_nandflash_config - use nand flash
make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0)
make at91sam9263ek_norflash_config - use nor flash
@@ -79,19 +79,15 @@ AT91SAM9M10G45EK
------------------------------------------------------------------------------
Memory map
- 0x20000000 - 23FFFFFF SDRAM (64 MB)
- 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J12)
+ 0x70000000 - 77FFFFFF SDRAM (128 MB)
Environment variables
U-Boot environment variables can be stored at different places:
- - Dataflash on SPI chip select 0 (dataflash card)
- Nand flash.
You can choose your storage location at config step (here for at91sam9m10g45ek) :
- make at91sam9m10g45ek_config - use data flash (spi cs0) (default)
make at91sam9m10g45ek_nandflash_config - use nand flash
- make at91sam9m10g45ek_dataflash_cs0_config - use data flash (spi cs0)
------------------------------------------------------------------------------
@@ -100,7 +96,7 @@ AT91SAM9RLEK
Memory map
0x20000000 - 23FFFFFF SDRAM (64 MB)
- 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash
+ 0xC0000000 - C07FFFFF Soldered Atmel Dataflash (AT45DB642)
Environment variables
@@ -108,12 +104,66 @@ Environment variables
- Dataflash on SPI chip select 0
- Nand flash.
- You can choose your storage location at config step (here for at91sam9260ek) :
- make at91sam9263ek_config - use data flash (spi cs0) (default)
- make at91sam9263ek_nandflash_config - use nand flash
- make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0)
+ You can choose your storage location at config step (here for at91sam9rlek) :
+ make at91sam9rlek_nandflash_config - use nand flash
+
+
+------------------------------------------------------------------------------
+AT91SAM9N12EK, AT91SAM9X5EK
+------------------------------------------------------------------------------
+
+Memory map
+ 0x20000000 - 27FFFFFF SDRAM (128 MB)
+
+Environment variables
+
+ U-Boot environment variables can be stored at different places:
+ - Nand flash.
+ - SD/MMC card
+ - Serialflash/Dataflash on SPI chip select 0
+
+ You can choose your storage location at config step (here for at91sam9x5ek) :
+ make at91sam9x5ek_dataflash_config - use data flash
+ make at91sam9x5ek_mmc_config - use sd/mmc card
+ make at91sam9x5ek_nandflash_config - use nand flash
+ make at91sam9x5ek_spiflash_config - use serial flash
+
+
+------------------------------------------------------------------------------
+SAMA5D3XEK
+------------------------------------------------------------------------------
+
+Memory map
+ 0x20000000 - 3FFFFFFF SDRAM (512 MB)
+
+Environment variables
+
+ U-Boot environment variables can be stored at different places:
+ - Nand flash.
+ - SD/MMC card
+ - Serialflash on SPI chip select 0
+
+ You can choose your storage location at config step (here for sama5d3xek) :
+ make sama5d3xek_mmc_config - use SD/MMC card
+ make sama5d3xek_nandflash_config - use nand flash
+ make sama5d3xek_serialflash_config - use serial flash
+
+
+II. NAND partition table
+
+ All the board support boot from NAND flash will use the following NAND
+ partition table
+
+ 0x00000000 - 0x0003FFFF bootstrap (256 KiB)
+ 0x00040000 - 0x000BFFFF u-boot (512 KiB)
+ 0x000C0000 - 0x000FFFFF env (256 KiB)
+ 0x00100000 - 0x0013FFFF env_redundant (256 KiB)
+ 0x00140000 - 0x0017FFFF spare (256 KiB)
+ 0x00180000 - 0x001FFFFF dtb (512 KiB)
+ 0x00200000 - 0x007FFFFF kernel (6 MiB)
+ 0x00800000 - 0xxxxxxxxx rootfs (All left)
-II. Watchdog support
+III. Watchdog support
For security reasons, the at91 watchdog is running at boot time and,
if deactivated, cannot be used anymore.