summaryrefslogtreecommitdiff
path: root/doc/README.phytec.pcm030
diff options
context:
space:
mode:
Diffstat (limited to 'doc/README.phytec.pcm030')
-rw-r--r--doc/README.phytec.pcm03042
1 files changed, 0 insertions, 42 deletions
diff --git a/doc/README.phytec.pcm030 b/doc/README.phytec.pcm030
deleted file mode 100644
index 05faab6..0000000
--- a/doc/README.phytec.pcm030
+++ /dev/null
@@ -1,42 +0,0 @@
-To build RAMBOOT, replace this section the main Makefile
-
-pcm030_config \
-pcm030_RAMBOOT_config \
-pcm030_LOWBOOT_config: unconfig
- @ >include/config.h
- @[ -z "$(findstring LOWBOOT_,$@)" ] || \
- { echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >board/phytec/pcm030/config.tmp ; \
- echo "... with LOWBOOT configuration" ; \
- }
- @[ -z "$(findstring RAMBOOT_,$@)" ] || \
- { echo "CONFIG_SYS_TEXT_BASE = 0x00100000" >board/phycore_mpc5200b_tiny/\
- config.tmp ; \
- echo "... with RAMBOOT configuration" ; \
- echo "... remember to make sure that MBAR is already \
- switched to 0xF0000000 !!!" ; \
- }
- @$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec
- @ echo "remember to set pcm030_REV to 0 for rev 1245.0 rev or to 1 for rev 1245.1"
-
-Alternative SDRAM settings:
-
-#define SDRAM_MODE 0x018D0000
-#define SDRAM_EMODE 0x40090000
-#define SDRAM_CONTROL 0x715f0f00
-#define SDRAM_CONFIG1 0x73722930
-#define SDRAM_CONFIG2 0x47770000
-
-/* Settings for XLB = 99 MHz */
-#define SDRAM_MODE 0x008D0000
-#define SDRAM_EMODE 0x40090000
-#define SDRAM_CONTROL 0x714b0f00
-#define SDRAM_CONFIG1 0x63611730
-#define SDRAM_CONFIG2 0x47670000
-
-The board ships default with the environment in EEPROM
-Moving the environment to flash can be more reliable
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0xfe0000)
-#define CONFIG_ENV_SIZE 0x20000
-#define CONFIG_ENV_SECT_SIZE 0x20000