summaryrefslogtreecommitdiff
path: root/doc/README.rockchip
diff options
context:
space:
mode:
Diffstat (limited to 'doc/README.rockchip')
-rw-r--r--doc/README.rockchip31
1 files changed, 29 insertions, 2 deletions
diff --git a/doc/README.rockchip b/doc/README.rockchip
index 186a1a0..2d8cf9f 100644
--- a/doc/README.rockchip
+++ b/doc/README.rockchip
@@ -36,15 +36,16 @@ You will need:
Building
========
-At present seven RK3288 boards are supported:
+At present eight RK3288 boards are supported:
- EVB RK3288 - use evb-rk3288 configuration
- Fennec RK3288 - use fennec-rk3288 configuration
- Firefly RK3288 - use firefly-rk3288 configuration
- Hisense Chromebook - use chromebook_jerry configuration
- - Tinker RK3288 - use tinker-rk3288 configuration
+ - MiQi RK3288 - use miqi-rk3288 configuration
- PopMetal RK3288 - use popmetal-rk3288 configuration
- Radxa Rock 2 - use rock2 configuration
+ - Tinker RK3288 - use tinker-rk3288 configuration
Two RK3036 board are supported:
@@ -147,6 +148,32 @@ For evb_rk3036 board:
Note: rk3036 SDMMC and debug uart use the same iomux, so if you boot from SD, the
debug uart must be disabled
+
+Booting from an SD card on RK3188
+=================================
+
+For rk3188 boards the general storage onto the card stays the same as
+described above, but the image creation needs a bit more care.
+
+The bootrom of rk3188 expects to find a small 1kb loader which returns
+control to the bootrom, after which it will load the real loader, which
+can then be up to 29kb in size and does the regular ddr init.
+
+Additionally the rk3188 requires everything the bootrom loads to be
+rc4-encrypted. Except for the very first stage the bootrom always reads
+and decodes 2kb pages, so files should be sized accordingly.
+
+# copy tpl, pad to 1020 bytes and append spl
+cat tpl/u-boot-tpl.bin > tplspl.bin
+truncate -s 1020 tplspl.bin
+cat spl/u-boot-spl.bin >> tplspl.bin
+tools/mkimage -n rk3188 -T rksd -d tplspl.bin out
+
+# truncate, encode and append u-boot.bin
+truncate -s %2048 u-boot.bin
+cat u-boot.bin | split -b 512 --filter='openssl rc4 -K 7C4E0304550509072D2C7B38170D1711' >> out
+
+
Using fastboot on rk3288
========================
- Write GPT partition layout to mmc device which fastboot want to use it to