summaryrefslogtreecommitdiff
path: root/doc/README.semihosting
diff options
context:
space:
mode:
Diffstat (limited to 'doc/README.semihosting')
-rw-r--r--doc/README.semihosting54
1 files changed, 54 insertions, 0 deletions
diff --git a/doc/README.semihosting b/doc/README.semihosting
new file mode 100644
index 0000000..7248560
--- /dev/null
+++ b/doc/README.semihosting
@@ -0,0 +1,54 @@
+/*
+ * Copyright 2014 Broadcom Corporation.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+Semihosting is ARM's way of having a real or virtual target communicate
+with a host or host debugger for basic operations such as file I/O,
+console I/O, etc. Please see
+http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0471c/Bgbjjgij.html for more information.
+
+For developing on armv8 virtual fastmodel platforms, semihosting is a
+valuable tool since it allows access to image/configuration files before
+eMMC or other NV media are available.
+
+There are two main ARM virtual Fixed Virtual Platform (FVP) models,
+Versatile Express (VE) FVP and BASE FVP (See
+http://www.arm.com/products/tools/models/fast-models/foundation-model.php)
+The initial vexpress64 u-boot board created here runs on the VE virtual
+platform using the license-free Foundation_v8 simulator. Fortunately,
+the Foundation_v8 simulator also supports the BASE_FVP model which
+companies can purchase licenses for and contain much more functionality.
+So we can, in u-boot, run either model by either using the VE FVP (default),
+or turning on CONFIG_BASE_FVP for the more full featured model.
+
+Rather than create a new armv8 board similar to armltd/vexpress64, add
+semihosting calls to the existing one, enabled with CONFIG_SEMIHOSTING
+and CONFIG_BASE_FVP both set. Also reuse the existing board config file
+vexpress_aemv8a.h but differentiate the two models by the presence or
+absence of CONFIG_BASE_FVP. This change is tested and works on both the
+Foundation and Base fastmodel simulators.
+
+The level of semihosting support is minimal, restricted to just what it
+takes to load images to memory. If more semihosting functionality is
+required, such as file seek, outputting strings, reading characters, etc,
+then it can be easily added later.
+
+We require that the board include file define these env variables:
+- kernel_name e.g. "uImage"
+- kernel_addr_r e.g. "0x80000000"
+- initrd_name e.g. "ramdisk.img"
+- initrd_addr_r e.g. "0x88000000"
+- fdt_name e.g. "devtree.dtb"
+- fdt_addr_r e.g. "0x83000000"
+
+Optionally, "fdt_high" and "initrd_high" can be specified as per
+their rules for allowing or preventing copying of these images.
+
+For the "fdt chosen" startup macro, this code will then define:
+- initrd_end (based on retrieving initrd_addr_r plus actual initrd_size)
+
+We will then load the kernel, initrd, and fdt into the specified
+locations in memory in a similar way that the ATF fastmodel code
+uses semihosting calls to load other boot stages and u-boot itself.