diff options
Diffstat (limited to 'doc/device-tree-bindings')
-rw-r--r-- | doc/device-tree-bindings/ata/intel-sata.txt | 26 | ||||
-rw-r--r-- | doc/device-tree-bindings/misc/intel-lpc.txt | 47 | ||||
-rw-r--r-- | doc/device-tree-bindings/video/intel-gma.txt | 40 |
3 files changed, 110 insertions, 3 deletions
diff --git a/doc/device-tree-bindings/ata/intel-sata.txt b/doc/device-tree-bindings/ata/intel-sata.txt new file mode 100644 index 0000000..5e4da83 --- /dev/null +++ b/doc/device-tree-bindings/ata/intel-sata.txt @@ -0,0 +1,26 @@ +Intel Pantherpoint SATA Device Binding +====================================== + +The device tree node which describes the operation of the Intel Pantherpoint +SATA device is as follows: + +Required properties : +- compatible = "intel,pantherpoint-ahci" +- intel,sata-mode : string, one of: + "ahci" : Use AHCI mode (default) + "combined" : Use combined IDE + legacy mode + "plain-ide" : Use plain IDE mode +- intel,sata-port-map : Which SATA ports are enabled, bit 0=enable first port, + bit 1=enable second port, etc. +- intel,sata-port0-gen3-tx : Value for the IOBP_SP0G3IR register +- intel,sata-port1-gen3-tx : Value for the IOBP_SP1G3IR register + +Example +------- + +sata { + compatible = "intel,pantherpoint-ahci"; + intel,sata-mode = "ahci"; + intel,sata-port-map = <1>; + intel,sata-port0-gen3-tx = <0x00880a7f>; +}; diff --git a/doc/device-tree-bindings/misc/intel-lpc.txt b/doc/device-tree-bindings/misc/intel-lpc.txt index 7e1b389..ba6ca9d 100644 --- a/doc/device-tree-bindings/misc/intel-lpc.txt +++ b/doc/device-tree-bindings/misc/intel-lpc.txt @@ -6,10 +6,37 @@ Count device is as follows: Required properties : - compatible = "intel,lpc" -- gen-dec : Specifies the values for the gen-dec registers. Up to four cell - pairs can be provided - the first of each pair is the base address and +- intel,alt-gp-smi-enable : Enable SMI sources. This cell is written to the + ALT_GP_SMI_EN register +- intel,gen-dec : Specifies the values for the gen-dec registers. Up to four + cell pairs can be provided - the first of each pair is the base address and the second is the size. These are written into the GENx_DEC registers of the LPC device +- intel,gpi-routing : Specifies the GPI routing. There are 16 cells, valid + values are: + 0 No effect (default) + 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) + 2 SCI (if corresponding GPIO_EN bit is also set) +- intel,pirq-routing : Speciffies the routing IRQ number for each of PIRQA-H, + one cell for each. + 0x00 - 0000 = Reserved + 0x01 - 0001 = Reserved + 0x02 - 0010 = Reserved + 0x03 - 0011 = IRQ3 + 0x04 - 0100 = IRQ4 + 0x05 - 0101 = IRQ5 + 0x06 - 0110 = IRQ6 + 0x07 - 0111 = IRQ7 + 0x08 - 1000 = Reserved + 0x09 - 1001 = IRQ9 + 0x0A - 1010 = IRQ10 + 0x0B - 1011 = IRQ11 + 0x0C - 1100 = IRQ12 + 0x0D - 1101 = Reserved + 0x0E - 1110 = IRQ14 + 0x0F - 1111 = IRQ15 + PIRQ[n]_ROUT[7] - PIRQ Routing Control + 0x80 - The PIRQ is not routed. Example @@ -19,5 +46,19 @@ lpc { compatible = "intel,lpc"; #address-cells = <1>; #size-cells = <1>; - gen-dec = <0x800 0xfc 0x900 0xfc>; + intel,gen-dec = <0x800 0xfc 0x900 0xfc>; + + intel,pirq-routing = <0x8b 0x8a 0x8b 0x8b + 0x80 0x80 0x80 0x80>; + /* + * GPI routing + * 0 No effect (default) + * 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is + * also set) + * 2 SCI (if corresponding GPIO_EN bit is also set) + */ + intel,gpi-routing = <0 0 0 0 0 0 0 2 + 1 0 0 0 0 0 0 0>; + /* Enable EC SMI source */ + intel,alt-gp-smi-enable = <0x0100>; }; diff --git a/doc/device-tree-bindings/video/intel-gma.txt b/doc/device-tree-bindings/video/intel-gma.txt new file mode 100644 index 0000000..914be4f --- /dev/null +++ b/doc/device-tree-bindings/video/intel-gma.txt @@ -0,0 +1,40 @@ +Intel GMA Bindings +================== + +This is the Intel Graphics Media Accelerator. This binding supports selection +of display parameters only. + + +Required properties: + - compatible : "intel,gma"; + +Optional properties: + - intel,dp-hotplug : values for digital port hotplug, one cell per value for + ports B, C and D + - intel,panel-port-select : output port to use: 0=LVDS 1=DP_B 2=DP_C 3=DP_D + - intel,panel-power-cycle-delay : T4 time sequence (6 = 500ms) + + The following delays are in units of 0.1ms: + - intel,panel-power-up-delay : T1+T2 time sequence + - intel,panel-power-down-delay : T3 time sequence + - intel,panel-power-backlight-on-delay : T5 time sequence + - intel,panel-power-backlight-off-delay : Tx time sequence + + - intel,cpu-backlight : Value for CPU Backlight PWM + - intel,pch-backlight : Value for PCH Backlight PWM + +Example +------- + +gma { + compatible = "intel,gma"; + intel,dp_hotplug = <0 0 0x06>; + intel,panel-port-select = <1>; + intel,panel-power-cycle-delay = <6>; + intel,panel-power-up-delay = <2000>; + intel,panel-power-down-delay = <500>; + intel,panel-power-backlight-on-delay = <2000>; + intel,panel-power-backlight-off-delay = <2000>; + intel,cpu-backlight = <0x00000200>; + intel,pch-backlight = <0x04000000>; +}; |